真空条件下不同波长固体激光烧蚀单晶硅的实验研究

通过倍频Nd：YAG固体激光的基波得到波长分别为532、355和266 nm的激光,研究了单晶硅（Si）对不同波长固体激光的吸收规律和3种不同波长激光在真空条件下烧蚀单晶Si的烧蚀特征。结果表明,单晶Si对波长为100~370 nm的紫外激光具有很好的吸收效果;在其他条件相同时,532 nm波长激光烧蚀单晶Si所需最低单脉冲能量（Ep=30 μJ）是355和266 nm波长激光烧蚀单晶Si所需最低单脉冲能量（Ep=15 μJ）的2倍;532、355和266 nm的激光烧蚀单晶Si的烧蚀阈值随着波长的变短而变小。     

Simultaneous brightness enhancement and wavelength conversion to the eye‐safe region in a high‐power diamond Raman laser

Brightness enhancement in an external cavity diamond Raman laser designed for high power conversion of a neodymium (1064 nm) laser to the eye‐safe spectral region is reported. Using a multimode input beam pulsed at 36 kHz pulse repetition frequency, 16.2 W with 40% overall conversion efficiency was obtained at the second Stokes wavelength of 1485 nm. The output beam had a quality factor of which is a factor of 2.7 times lower than that of the input beam, resulting in a higher overall brightness. The output power, brightness, and brightness enhancement obtained represent significant advances in performance for Raman lasers as well as other competing kHz‐pulsed eye‐safe technologies.     

Characterization of laser processing of single‐crystal natural diamonds using micro‐Raman spectroscopic investigations

The application of lasers for processing diamond has revolutionized the diamond industry and its applications in microelectronics, microelectromechanical system (MEMS) and microoptoelectromechanical system (MOEMS) technologies. The process quality can be evaluated using spectroscopic techniques. In the present investigation, four different types of Q‐switched solid‐state lasers (with different beam parameters), namely, a lamp‐pumped Nd:YAG laser operating at 1064 nm, a lamp‐pumped Nd:YAG laser operating at second harmonically generated 532 nm, a diode‐pumped Nd:YVO₄ laser operating at 1064 nm and a diode‐pumped Nd:YAG laser operating at 1064 nm, have been employed for the processing of a single‐crystal, gem‐quality, natural diamond. The main objective behind the selection of these lasers with different beam parameters was to study the effect of wavelength, pulse width, pulse energy, peak power and beam quality factor (M² factor) on various aspects of processing (such as microcracking, material loss and cut surface quality) and their relative merits and demerits. The overall weight loss of the diamond and formation of microcracks during processing have been studied for the above four cases. The characteristics of the graphite formed during processing, elemental analysis, surface morphology of the cut surface and process dynamics have been studied using micro‐Raman spectroscopy and scanning electron microscopy (SEM). We observed that laser cutting of single‐crystal diamonds used for industrial applications can be accomplished without microcracking or surface distortion using Q‐switched Nd:YAG lasers. This allows direct processing without extensive postgrinding and polishing stages. Very efficient diamond processing is possible using diode‐pumped lasers, which results in the lowest possible breakage rate, good accuracy, good surface finish and low weight loss. From the micro‐Raman and SEM studies, it is concluded that the surface quality obtained is superior when diode‐pumped Nd:YVO₄ laser is used, owing to its extremely high peak power. The maximum graphite content is observed while processing with lamp‐pumped Nd:YAG laser at 532 nm. An overall comparison of all the laser sources leads to the conclusion that diode‐pumped Nd:YAG laser is a superior option for the efficient processing of natural diamond crystals. Copyright © 2006 John Wiley & Sons, Ltd.     

Solid-state Raman laser generating discretely tunable ultraviolet between 266 and 320 nm

We report a KGd(WO(4))(2) Raman laser pumped by a 532 nm laser that uses the intracavity nonlinear second harmonic and sum-frequency mixing of the Stokes and fundamental fields in beta-barium borate to generate selectable output among eight output wavelengths over the range 266-320 nm. Output pulse energies of up to 0.22 mJ at 10 Hz pulse repetition rate and average output powers up to 48 mW at 5 kHz were achieved.     

铅的单脉冲LIBS定量光谱检测与比较

单脉冲激光诱导击穿光谱技术(single-shot,LIBS)是一种在国际上被广泛使用的物质及元素检测技术,具有快速、准确、无需样品制备等诸多优点.为了满足单脉冲LIBS的实验要求,实验用激光器的选取是非常重要的,它直接关系到诱导激光的强度以及脉冲宽度的大小,而这些又对实验结果产生深刻的影响.因此,选取正确的激光器,是单脉冲LIBS成功的关键.正是基于这个目的,比较了不同波长、不同激光能量的激光脉冲作用下,纯铅发射光谱的定量变化,对于单脉冲LIBS中激光器的选取有着很好的借鉴意义.     

Implementation of a novel low‐noise InGaAs detector enabling rapid near‐infrared multichannel Raman spectroscopy of pigmented biological samples

Pigmented tissues are inaccessible to Raman spectroscopy using visible laser light because of the high level of laser‐induced tissue fluorescence. The fluorescence contribution to the acquired Raman signal can be reduced by using an excitation wavelength in the near infrared range around 1000 nm. This will shift the Raman spectrum above 1100 nm, which is the principal upper detection limit for silicon‐based CCD detectors. For wavelengths above 1100 nm indium gallium arsenide detectors can be used. However, InGaAs detectors have not yet demonstrated satisfactory noise level characteristics for demanding Raman applications. We have tested and implemented for the first time a novel sensitive InGaAs imaging camera with extremely low readout noise for multichannel Raman spectroscopy in the short‐wave infrared (SWIR) region. The effective readout noise of two electrons is comparable to that of high quality CCDs and two orders of magnitude lower than that of other commercially available InGaAs detector arrays. With an in‐house built Raman system we demonstrate detection of shot‐noise limited high quality Raman spectra of pigmented samples in the high wavenumber region, whereas a more traditional excitation laser wavelength (671 nm) could not generate a useful Raman signal because of high fluorescence. Our Raman instrument makes it possible to substantially decrease fluorescence background and to obtain high quality Raman spectra from pigmented biological samples in integration times well below 20 s. Copyright © 2015 John Wiley & Sons, Ltd.     

Microanalysis of clay‐based pigments in painted artworks by the means of Raman spectroscopy

FT Raman spectroscopy and micro‐Raman spectroscopy with lasers of three different wavelengths (1064 nm, 785 nm and 532 nm) were used for analysis of reference samples of natural clay pigments including white clay minerals (kaolinite, illite, montmorillonite), green earths (glauconite and celadonite) and red earths (natural mixtures of white clay minerals with hematite). In addition, eight micro‐samples obtained from historical paintings containing clay pigments in ground and colour layers have been examined. Powder X‐ray diffraction and micro‐diffraction were used as supplementary methods. It was found that laser operating at 1064 nm provided the best quality Raman spectra for distinguishing different white clay minerals, but the spectra of green and red earths were affected by strong fluorescence caused by the presence of iron. Green earth minerals could be easily distinguished by 532 or 785 nm excitation lasers, even in small concentrations in the paint layers. On the other hand, when anatase (TiO₂) or iron oxides (such as hematite) were present as admixtures (both are quite common, particularly in red earths), the collection of characteristic spectra of clay minerals which form the main component of the layer was hindered or even prevented. Another complicating factor was the fluorescence produced by organic binders when analysing the micro‐samples of artworks. In those cases, it is always necessary to use powder X‐ray micro‐diffraction to avoid misleading interpretations of the pigment's composition. Copyright © 2013 John Wiley & Sons, Ltd.     

Deep‐UV tip‐enhanced Raman scattering

We report for the first time the tip‐enhancement of resonance Raman scattering using deep ultraviolet (DUV) excitation wavelength. The tip‐enhancement was successfully demonstrated with an aluminum‐coated silicon tip that acts as a plasmonic material in DUV wavelengths. Both the crystal violet and adenine molecules, which were used as test samples, show electronic resonance at the 266‐nm excitation used in the experiments. With results demonstrated here, molecular analysis and imaging with nanoscale spatial resolution in DUV resonance Raman spectroscopy can be realized using the tip‐enhancement effect. Copyright © 2009 John Wiley & Sons, Ltd.     

NIR‐Raman spectrum and DFT calculations of okadaic acid DSP marine biotoxin microprobe

Commercially available diarrhetic shellfish poisoning (DSP) marine toxins are limited to micrograms samples invisible to the naked eye or in small amounts of micromole concentration solutions that are not suitable for normal Raman spectroscopy. As the Raman‐derived techniques are increasingly employed in various detection schemes of harmful substances, Raman spectra of the target compounds are essential for molecular recognition, detection and sensing reasons. Using a new μ‐RIM™ stainless steel hydrophobic substrate, we recorded near‐infrared micro‐Raman spectrum of okadaic acid (OA), a DSP marine biotoxin from 75 µg recrystallized toxin after drop coating deposition. Excitation with the 785‐nm line allowed the recovery and assembling of the Raman spectrum over the 100–3200 cm⁻¹ spectral range on several OA microparticles, while the 532‐nm line excited the fluorescence emission that hampered the Raman signal. Density functional theory calculations were conducted on the isolated species both in gas phase and in ethanol solution to accurately assess and interpret the experimentally observed Raman bands. A good correlation between the experimental and theoretical Raman bands allowed for a reliable vibrational Raman assignment. Owing to the molecular geometry with intramolecular hydrogen bonds, the CC conjugated systems together with the methyl groups exhibited dominant OA Raman bands. Unlike domoic acid, an amnesic shellfish poisoning toxin whose carboxyl group showed the most intense Raman band, OA Raman characteristic band was not assigned to carboxyl group. Copyright © 2016 John Wiley & Sons, Ltd.     

机载大气探测激光雷达人眼安全分析

 依据美国ANSI标准,模拟计算了0~12 km的高度范围内不同的激光束发散角和不同激光脉冲能量比例的532和1 064 nm激光脉冲人眼安全最大阈值能量。给出两种532和1 064 nm激光脉冲人眼安全最大阈值能量分配方案：(1)激光束发散角为0.3 mrad且532与1 064 nm的激光脉冲最大阈值能量之比为1∶2;（2）激光束发散角为0.4 mrad且532与1 064 nm的激光脉冲最大阈值能量之比为1∶1。分析了用这两种激光脉冲人眼安全最大阈值能量分配方案探测模式大气时所对应的信噪比。分析结果表明：这两种方案既能保证机载激光雷达对模式大气探测时地面人眼安全又能达到探测所要求的信噪比。     

Sub‐picosecond Raman spectrometer for time‐resolved studies of structural dynamics in heme proteins

We describe a pump–probe Raman spectrometer based on a femtosecond Ti:sapphire laser, an optical parametric generator and two optical parametric amplifiers for time‐resolved studies, with emphasis on the structural dynamics in heme proteins. The system provides a 100‐fs pump pulse tunable in the range 500–600 nm and a transform‐limited sub‐picosecond probe pulse tunable in the range 390–450 nm. The spectrometer has spectral (25 cm⁻¹) and temporal (∼0.7 ps) resolutions which constitute an effective compromise for identifying transient heme protein species and for following their structural evolution by spontaneous Raman scattering in the time range 0.5 ps to 2 ns. This apparatus was applied to time‐resolved studies of a broad range of heme proteins, monitoring the primary dynamics of photoinduced heme coordination state and structural changes, its interaction with protein side‐chains and diatomic gaseous ligands, as well as heme vibrational cooling. The treatment of transient Raman spectra is described in detail, and the advantages and shortcomings of spontaneous resonance Raman spectroscopy for ultrafast heme proteins studies are discussed. We demonstrate the efficiency of the constructed spectrometer by measuring Raman spectra in the sub‐picosecond and picosecond time ranges for the oxygen‐storage heme protein myoglobin and for the oxygen‐sensor heme protein FixLH in interaction with the diatomic gaseous ligands CO, NO, and O₂. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectra of melamine and other chemicals using a 1550 nm (retina‐safe) laser

Many trace chemical analyses are being transitioned from the lab to the field, among which is surface‐enhanced Raman spectroscopy. Although initial portable Raman analyzers primarily employ 785 nm laser excitation, recent studies suggest longer wavelengths, with an appropriate surface‐enhanced Raman‐active substrate, may provide equal sensitivity. Furthermore, 1550 nm excitation may provide added safety for the user, in that permanent retina damage does not occur. Here, we show that a reasonable enhancement factor can be obtained for melamine using 1550 nm laser excitation that is nearly equivalent to those obtained using 785 and 1064 nm laser excitation. We also demonstrate that a number of other chemicals of interest can be measured by 1550 nm surface‐enhanced Raman scattering, albeit only modest sensitivity is achieved because of instrument limitations, not enhancement factors. Copyright © 2011 John Wiley & Sons, Ltd.     

High resolution scanning microanalysis on material surfaces using UV femtosecond laser induced breakdown spectroscopy

Femtosecond lasers together with high resolution optics have given us the ability to achieve submicron ablation spots which can play an important role in specific micromachining applications. Light emitted from the plasma at the sample surface created by a focused femtosecond laser pulse can also be used in laser induced breakdown spectroscopy (LIBS) and allows us to characterize the chemical composition of the target surface with micron-level lateral resolution. The spatial resolution using LIBS has often been defined by measuring the FWHM of the crater size. In this report, we study the application of femtosecond 266 nm laser pulses with very low energies of 10׳s of nanojoules. We have investigated spatial resolution using the detection of thin strips of chromium on silicon substrates and compared the actual width of the chromium versus the experimentally obtained width using LIBS detection. The variation of signal levels for low pulse energies is investigated on chromium surfaces. A spatial resolution of ~1 μm was obtained for detection of chromium from the emission.     

Laser wavelength dependence of background fluorescence in Raman spectroscopic analysis of synovial fluid from symptomatic joints

Gout is a disease process where the nucleation and growth of crystals in the synovial fluid of joints elicit painful arthritis‐like symptoms. Raman spectroscopy is evolving as a potential diagnostic tool in identifying such crystals; however, attainment of sufficient Raman signal while overcoming the background fluorescence remains as a major challenge. The current study focused on assessing whether excitation in 532–700 nm range will provide greater signal intensity than the standard 785 nm while not being impeded by background fluorescence. We characterized the fluorescence spectra, absorption spectra and Raman spectra of synovial fluid from patients who presented ‘gout‐like symptoms’ (symptomatic) and controls (asymptomatic). A digestion and filtration method was developed to isolate crystals from synovial fluid while reducing the organic burden. Spectral profile and photobleaching dynamics during Raman spectroscopy were observed under an excitation wavelength range spanning 532 to 785 nm. Absorbance and fluorescence profiles indicated the digestion and filtration worked effectively to extract crystals from symptomatic synovial fluid without introducing additional fluorescence. Raman spectral analyses at 532 nm, 660 nm, 690 nm and 785 nm indicated that both asymptomatic and symptomatic samples had significant levels of fluorescence at excitation wavelengths below 700 nm, which either hindered the collection of Raman signal or necessitated prolonged durations of photobleaching. Raman‐based diagnostics were more feasible at the longest excitation wavelength of 785 nm without employing photobleaching. This study further demonstrated that a near‐infrared (NIR) OEM‐based lower‐cost Raman system at 785 nm excitation has sufficient sensitivity to identify crystals isolated from the synovial fluid. In conclusion, while lower excitation wavelengths provide greater signal, the fluorescence necessitates NIR wavelengths for Raman analysis of crystal species observed in synovial aspirates. Copyright © 2013 John Wiley & Sons, Ltd.     

Laser removal of copper particles from silicon wafers using UV, visible and IR radiation

Laser removal of small copper particles from silicon wafer surfaces was carried out using Nd:YAG laser radiation from near-infrared (1064 nm) through visible (532 nm) to ultraviolet (266 nm). It has been found that both 266 nm and 532 nm are successful in removing the particles from the surface whereas 1064 nm was shown to be ineffective in the removal of particles. The damage-threshold laser fluence at 266 nm was much higher than other wavelengths which provides a much wider regime for safe cleaning of the surface without causing any substrate damage. The cleaning efficiency was increased with a shorter wavelength. The effect of laser wavelength in the removal process is discussed by considering the adhesion force of the particle on the surface and the laser-induced cleaning forces for the three wavelengths. Received: 31 May 2000 / Accepted: 14 July 2000 / Published online: 20 June 2001     

Laser‐induced phase changes in olivine FePO4: a warning on characterizing LiFePO4‐based cathodes with Raman spectroscopy

Raman spectroscopy is an excellent technique for probing lithium intercalation reactions of many diverse lithium ion battery electrode materials. The technique is especially useful for probing LiFePO₄‐based cathodes because the intramolecular vibrational modes of the PO₄³⁻ anions yield intense bands in the Raman spectrum, which are sensitive to the presence of Li⁺ ions. However, the high power lasers typically used in Raman spectroscopy can induce phase transitions in solid‐state materials. These phase transitions may appear as changes in the spectroscopic data and could lead to erroneous conclusions concerning the delithiation mechanism of LiFePO₄. Therefore, we examine the effect of exposing olivine FePO₄ to a range of power settings of a 532‐nm laser. Laser power settings higher than 1.3 W/mm² are sufficient to destroy the FePO₄ crystal structure and result in the formation of disordered FePO₄. After the laser is turned off, the amorphous FePO₄ compound crystallizes in the electrochemically inactive α‐FePO₄ phase. The present experimental results strongly suggest that the power setting of the excitation laser should be carefully controlled when using Raman spectroscopy to characterize fundamental lithium ion intercalation processes of olivine materials. In addition, Raman spectra of the amorphous intermediate might provide insight into the α‐FePO₄ to olivine FePO₄ phase transition that is known to occur at temperatures higher than 450 °C. Copyright © 2008 John Wiley & Sons, Ltd.     

Quantitative analysis of sugar composition in honey using 532‐nm excitation Raman and Raman optical activity spectra

Raman spectroscopy based on the 1064‐nm laser excitation was suggested as a handy non‐invasive technique allowing to quickly determine sugar content in honey and similar food products. In the present study, the green 532‐nm laser radiation is explored instead as it provides higher‐quality spectra in a shorter time. The sample fluorescence was quenched by purification with activated carbon. For control mixture decomposition of Raman spectra to standard subspectra led to a typical error of the sugar content of 3%. Raman optical activity (ROA) spectra that could be measured at the shorter excitation wavelength as well provided a lower accuracy (~8%) than the Raman spectra because of instrumental sensitivity and noise limitations. The results show that Raman spectroscopy provides elegant and reliable means for fast analyses of sugar‐based food products. Copyright © 2016 John Wiley & Sons, Ltd.     

Rapid synthesis and characterization of ultra‐thin shell Au@SiO2 nanorods with tunable SPR for shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS)

The recently reported shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS) is considered as the next generation of advanced spectroscopy for its surface and molecular generality. With the aim to utilize the virtues of shell‐isolated strategy and advance the SHINERS technique, we introduce a silane‐based rapid synthesis method of silica‐coating Au nanorods (Au@SiO₂ NRs) with manoeuvrable ultra‐thin shell and tunable SPR. The results demonstrate that the SPR of Au NRs could be optimized to obtain large Raman enhancement using either 633 nm or 785 nm laser. Differing from previously reported Au@SiO₂ NRs synthesis method, we can tune the silica shell thickness within several nanometers to maximize the Raman signal while effectively eliminating the exterior interference. And this advanced synthesis method has also significantly reduced the silica‐coating time from one day to ca. 1 h. This method as a new development of SHINERS technique has successfully got enhanced signal in solution Raman tests of malachite green, giving a great potential to be extended to in‐situ measurement for daily life detection. Copyright © 2013 John Wiley & Sons, Ltd.     

Single‐beam coherent anti‐Stokes Raman scattering (CARS) spectroscopy of gas‐phase CO2 via phase and polarization shaping of a broadband continuum

Coherent anti‐Stokes Raman scattering (CARS) spectroscopy of gas‐phase CO₂ is demonstrated using a single femtosecond (fs) laser beam. A shaped ultrashort laser pulse with a transform‐limited temporal width of ∼7 fs and spectral bandwidth of ∼225 nm (∼3500 cm⁻¹) is employed for simultaneous excitation of the CO₂ Fermi dyads at ∼1285 and ∼1388 cm⁻¹. CARS signal intensities for the two Raman transitions and their ratio as a function of pressure are presented. The signal‐to‐noise ratio of the single beam–generated CO₂ CARS signal is sufficient to perform concentration measurements at a rate of 1 kHz. The implications of these experiments for measuring CO₂ concentrations and rapid pressure fluctuations in hypersonic and detonation‐based chemically reacting flows are also discussed. Copyright © 2010 John Wiley & Sons, Ltd.