Surface‐enhanced Raman spectroscopy (SERS) on silver colloids for the identification of ancient textile dyes: Tyrian purple and madder

Surface‐enhanced Raman spectroscopy (SERS) was used for the identification of natural organic dyes belonging to indigoid and anthraquinone classes in archeological samples, and good agreement with the corresponding reference commercial materials was found. Special attention was paid to the well‐known problem of anomalous bands that arise sometimes in the SERS spectra on colloids: as suggested in the literature, this problem could be reduced by the use of poly‐L ‐lysine and ascorbic acid as aggregating agents, but we observed that also the addition first of the analyte and subsequently of suitable electrolytes to the colloid in an inverted order compared to the most widely used method can be of help in limiting the intensity of such spurious bands. This procedure allowed us to obtain, for the first time, the SERS spectra of both modern and ancient Tyrian purple and to solve a specific problem observed in the analysis of archeological wool samples dyed with madder lake, i.e. the competition in the SERS response between the dye and other compounds possibly deriving from the degradation of the peptide chain during the hydrolysis treatment during the extraction of the dye from the wool fiber. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for trace‐level detection of explosives

The detection of explosives and their associated compounds for security screening is an active area of research and a wide variety of detection methods are involved in this very challenging area. Surface‐enhanced Raman scattering (SERS) spectroscopy is one of the most sensitive tools for the detection of molecules adsorbed on nano‐scale roughened metal surface. Moreover, SERS combines high sensitivity with the observation of vibrational spectra of species, giving complete information on the molecular structure of material under study. In this paper, SERS was applied to the detection of very small quantities of explosives adsorbed on industrially made substrates. The spectra were acquired with a compact Raman spectrometer. Usually, a high signal‐to‐noise (S/N) spectrum, suitable for identification of explosive molecules down to few hundreds of picograms, was achieved within 30 s. Our measurements suggest that it is possible to exploit SERS using a practical detection instrument for routine analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectra of dimethoate and omethoate

Surface‐enhanced Raman scattering (SERS) spectra are presented and analyzed for two important organophosphate pesticides, dimethoate (DMT) and omethoate (OMT). Very detailed SERS spectra were obtained by aggregated Ag hydrosols, both in aqueous suspension and dried on a glass substrate. The SERS and ordinary Raman spectra of DMT do not resemble each other, suggesting that a chemical reaction immediately occurs when DMT is adsorbed onto the metal surface. We propose that the reaction product is OMT, which is the oxygen analog of DMT, on the basis of the Raman and SERS spectra of OMT. Further support is derived from the calculated Raman spectra of DMT and OMT. Minor wavenumber and intensity differences that are observed between the SERS spectra of DMT reaction product and those of OMT could be related to different metal/adsorbate interaction modes. The results can be useful in the development of new analytical methods for the determination of pesticide residues in food. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectra of the neonicotinoid pesticide thiacloprid

Thiacloprid is a widely used pesticide belonging to the neonicotinoid class, which is characterized by a selective activity against insects and a reduced acute toxicity for humans. The importance of the environmental impact of neonicotinoids is being intensively researched, in order to evaluate the danger they pose for useful insects. Physical methods which allow the characterization of neonicotinoids in diluted aqueous solutions are therefore desirable. We present a study of Raman and surface‐enhanced Raman scattering (SERS) spectroscopy on thiacloprid in solid state, in acetone solution, and adsorbed onto silver and gold hydrosols at μM concentration. Density functional theory calculations allow the individualization of the most stable molecular structure, both in gas phase and in solution, and of the corresponding Raman spectra. The vibrational assignments lead to an interpretation of the differences between SERS and ordinary Raman spectra based on the possible interactions between the molecule and the metal surface, the main one involving the iminocyano group. Formation of a charge‐transfer complex is suggested by the dependence of the SERS spectra on the laser excitation wavelength. We evaluate the applicability of SERS spectroscopy to the chemical analysis of thiacloprid comparing SERS with current analytical methods. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of genomic DNA from in vitro grown plant species

Surface‐enhanced Raman scattering (SERS) effect was used to demonstrate ultrasensitive optical detection of nucleic acids. In this work, the SERS spectra of seven genomic DNAs from leaves of Arnica montana (L.), Fam. Compositae, Astragalus peterfii (Jáv.), Fam. Fabaceae, Kalanchoe x hybrida, Fam. Crassulaceae, strawberry (Fragaria x ananassa Duch.), Fam. Rosaceae, carnation (Dianthus caryophyllus L.), Fam. Caryophyllaceae, apple (Malus domestica Borkh.), Fam. Rosaceae and Persian violet (Exacum affine Balf.), Fam. Gentianaceae were analyzed in the wavenumber range 200–1800 cm⁻¹. SERS signatures, spectroscopic band assignments and structural interpretations of these plant genomic DNAs are reported. SERS spectra of nucleic acids are compared here with caution, because these signals are time‐dependent. The SERS spectra corresponding to DNA from Arnica, Dianthus, Fragaria and Kalanchoe leaves show well‐resolved, accurate bands, providing thus a high molecular structural information content. Based on this work, specific plant DNA–ligand interactions or DNA structural changes induced by plant stress conditions associated with their natural environment might be further investigated using SERS spectroscopy. Besides, this study will generate information that is valuable in the development of label‐free DNA‐based nanosensors for chemical probing in the living cell. Copyright © 2011 John Wiley & Sons, Ltd.     

Deep‐UV tip‐enhanced Raman scattering

We report for the first time the tip‐enhancement of resonance Raman scattering using deep ultraviolet (DUV) excitation wavelength. The tip‐enhancement was successfully demonstrated with an aluminum‐coated silicon tip that acts as a plasmonic material in DUV wavelengths. Both the crystal violet and adenine molecules, which were used as test samples, show electronic resonance at the 266‐nm excitation used in the experiments. With results demonstrated here, molecular analysis and imaging with nanoscale spatial resolution in DUV resonance Raman spectroscopy can be realized using the tip‐enhancement effect. Copyright © 2009 John Wiley & Sons, Ltd.     

Multianalyte immunoassay based on surface‐enhanced Raman spectroscopy

In this paper, two immunoassay methods based on SERS are developed for multiplex analysis, both of which stemmed from the concept of forming a sandwich structure ‘capture antibody substrate/antigen/Raman‐reporter‐labeled immuno‐nanoparticles’. They are two‐molecule labeled one‐nanoparticle and one‐molecule labeled two‐nanoparticle methods. In both the methods, two different antibodies covalently bound to a solid substrate can specifically capture two different antigens from a sample. The captured antigens in turn bind selectively to their corresponding antibodies immobilized on Raman‐reporter‐labeled nanoparticles. Multianalyte immunoassay is successfully demonstrated by the detection of characteristic Raman bands of the probe molecules only when the antigen and antibody are matched. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of DNA from leaves of in vitro grown apple plants

Ultrasensitive Raman measurements of nucleic acids are possible by exploiting the effect of surface‐enhanced Raman scattering (SERS). In this work, the vibrational spectra of eight genomic DNAs from in vitro grown apple leaf tissues (Malus domestica Borkh., Fam Rosaceae, cvs. Florina, Idared, Rebra, Goldrush, Romus 3, Romus 4 and the rootstocks M9 and M26) were analyzed using surface‐enhanced Raman spectroscopy, in the wavenumber range 200–1800 cm⁻¹. SERS signatures, spectroscopic band assignments and structural interpretations of these plant genomic DNAs are reported. Strong dependences of the SERS spectra on genomic DNA amount in the measured sample volume and on time were observed. Similarities of the SERS signals of DNAs from Rebra and Romus 3 leaves were detected. To our knowledge, this is the first SERS study on genomic DNA from leaf tissues. The present work provides a basis for future use of surface‐enhanced Raman spectroscopy to analyze specific plant DNA–ligand interactions or DNA structural changes induced by plants' stress conditions associated with their natural environment. Besides, this study will generate information that is valuable in the development of low‐level plant DNA‐based analytical sensors. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of 4‐tert‐butylpyridine on a silver electrode

We report the observation of large surface‐enhanced Raman scattering (SERS) (10⁶) for 4‐tert‐butylpyridine molecules adsorbed on a silver electrode surface in an electrochemical cell with electrode potential set at − 0.5 V. A decrease in electrode potential to − 0.3 V was accompanied by a decrease in relative intensities of the vibrational modes. However, there were no changes in vibrational wavenumbers. Comparison of both normal solution Raman and SERS spectra shows very large enhancement of the intensities of a₁, a₂, and b₂ modes at laser excitation of 488 nm. Enhancement of the non‐totally symmetric modes indicates the presence of charge transfer as a contributor to the enhancement. Copyright © 2011 John Wiley & Sons, Ltd.     

Gold‐coated zinc oxide nanowire‐based substrate for surface‐enhanced Raman spectroscopy

Zinc oxide nanowires with two distinct morphologies were synthesized on silicon substrates using a simple thermal evaporation and vapor transport method in an oxidizing environment. The as‐synthesized nanowires were coated with gold to allow excitation of surface plasmons over a broad frequency range. SERS studies with near‐IR excitation at 785 nm showed significant enhancement (average enhancement > 10⁶) with excellent reproducibility to detect monolayer concentrations of 4‐methylbenzenethiol (4‐MBT) and 1,2‐benzendithiol (1,2‐BDT) probe molecules. The Raman enhancement showed a strong dependence on the gold film thickness, and the peak enhancement was observed for a ∼40‐nm‐thick film. The Raman enhancement was stronger for randomly oriented nanowires compared to aligned ones suggesting the importance of contributions from the junctions of nanowires. Copyright © 2009 John Wiley & Sons, Ltd.     

Understanding tip‐enhanced Raman spectra of biological molecules: a combined Raman,SERS and TERS study

Although conventional Raman, surface‐enhanced Raman (SERS) and tip‐enhanced Raman spectroscopy (TERS) have been known for a long time, a direct, thorough comparison of these three methods has never been carried out. In this paper, spectra that were obtained by conventional Raman, SERS (on gold and silver substrates) and TERS (in ‘gap mode’ with silver tips and gold substrates) are compared to learn from their differences and similarities. Because the investigation of biological samples by TERS has recently become a hot topic, this work focuses on biologically relevant substances. Starting from the TER spectra of bovine serum albumin as an example for a protein, the dipeptides Phe–Phe and Tyr–Tyr and the tripeptide Tyr–Tyr–Tyr were investigated. The major findings were as follows. (1) We show that the widely used assumption that spectral bands do not shift when comparing SER, TER and conventional Raman spectra (except due to binding to the metal surface in SERS or TERS) is valid. However, band intensity ratios can differ significantly between these three methods. (2) Marker bands can be assigned, which should allow one to identify and localize proteins in complex biological environments in future investigations. From our results, general guidelines for the interpretation of TER spectra are proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering within silver‐nanoparticle‐decorated nanometric apertures

An analytical approach using enhanced Raman spectroscopy to record molecular vibrations and associated molecular images within nanometric apertures is presented, which can essentially rival or surpass its counterparts, i.e. fluorescence microscopy, by providing unique structure‐specific information forward to chemical identification and structure elucidation. Utilizing a precise nanolithographic technology and the following chemically electroless silver deposition procedure, we deliberately construct the large scale zero‐mode waveguide array in gold film with embossed silver nanostructures on the bottom of nanowells capable of acquiring enhanced Raman spectra with substantial sensitivity and high chemical fidelity. Two chemicals, aminothiophenol (4‐ATP) and Rhodamine 6G, respectively, are employed as molecular indicators to successfully demonstrate the capability of this analytical strategy by exhibiting high‐quality Raman spectra and 2D chemical‐specific images. With a high magnitude objective (60×), we enable to acquire Raman spectra from a single nanometric aperture and quantitatively determine a peak enhancement factor of 3.63 × 10⁵ for ATP, while 1.25 × 10⁶ to Rhodamine 6G, comparable with a regular nanoparticle‐based surface‐enhanced Raman spectroscopy‐active substrate. Overall, the compelling characteristics of this detection scheme highlight its privileges for interrogating the individual molecular behavior in extremely confined geometry and illustrating the chemical insights of trace components without any labeling reagent and extra sample preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

Vibrational and surface‐enhanced Raman spectra of vanillic acid

The 3‐methoxy‐4‐hydroxybenzoic acid or vanillic acid (VA) is a naturally occurring molecule important in winemaking. The spectral fingerprints of VA observed in the infrared and Raman spectra are assigned to fundamental vibrational wavenumbers supported by quantum chemical computations. The surface‐enhanced Raman scattering (SERS) of the VA has been obtained in silver colloidal solutions making possible analytical applications for detection of VA at picomole concentrations. Copyright © 2008 John Wiley & Sons, Ltd.     

Detection of melamine in liquid milk using surface‐enhanced Raman scattering spectroscopy

Melamine, a nitrogen‐rich chemical, has recently caused enormous economic losses to the food industry due to the cases of milk products adulterated by melamine. This has led to an urgent need of rapid and reliable methods for detection of melamine in food. In this study, surface‐enhanced Raman scattering (SERS) spectroscopy was used to detect melamine in liquid milk. The sample preparation with liquid milk is very easy; it has to be only diluted with double‐distilled water followed by centrifugation. By using a silver colloid, at least a 10⁵‐fold enhancement of the Raman signal was achieved for the measurement of melamine. The limit of detection by this method was 0.01 µg ml⁻¹ for melamine standard samples. Based on the intensity of the Raman vibrational bands normalised to that of the band at 928 cm⁻¹ (CH₂), an external standard method was employed for quantitative analysis. The linear regression square (R²) of the curve was 0.9998; the limit of quantitation using this approach was 0.5 µg ml⁻¹ of melamine in liquid milk; the relative standard deviation was ≤10%; and recoveries were from 93 to 109%. The test results for SERS were very precise and as good as those obtained by liquid chromatography/tandem mass spectrometry. The method was simple, fast(only needs about 3 min), cost effective, and sensitive for the detection of melamine in liquid milk samples. Therefore, it is more suitable for the field detection of melamine in liquid milk. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman spectra of flavone and several hydroxy derivatives

The Raman and surface‐enhanced Raman spectra (SERS) of flavone and three of its hydroxy derivatives, 3‐hydroxyflavone (3‐HF) and 5‐hydroxyflavone (5‐HF) and quercetin (3,5,7,3′,4′ pentahydroxyflavone) have been obtained. The normal Raman (NR) spectra were taken in the powder form. The SERS spectra were obtained both on Ag colloids and Ag electrode substrates. Assignments of the spectrally observed normal modes were aided by density functional theory (DFT) calculations using the B3LYP functional and the 6‐31 + G* basis, a split valence polarized basis set with diffuse functions. Excellent fits were obtained for the observed spectra with little or no scaling. The most intense lines of the NR spectra are those in the CO stretching region (near 1600 cm⁻¹). These lines are often weakened by proximity to the surface, while other lines at lower wavenumbers, due to in‐plane ring stretches, tend to be strongly enhanced. The SERS spectrum of flavone is weak both on the colloid and on the electrode, indicating weak attachment to the surface. In contrast, the SERS spectra of the hydroxy derivatives of flavone are intense, indicating the assistance of OH groups in attachment to the surface. The spectra of the various species are compared, and a case study of application to detection of a textile dye (Persian berries), which contains quercetin, is presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of protoberberine alkaloids

Quaternary protoberberine alkaloids are a class of natural dyes characterized by bright colors ranging from yellow to orange. As they present a strong fluorescence emission, their analysis by Raman spectroscopy is limited to specific techniques such as Fourier transform (FT)‐Raman and spectral shift Raman techniques such as shifted subtracted Raman difference spectroscopy (SSRDS) and shifted excitation Raman difference spectroscopy (SERDS). In a previous article, we successfully used surface‐enhanced Raman scattering (SERS) in the analysis of the alkaloid dye berberine in an ancient textile. The examination of the Raman and SERS spectra of berberine in combination with density functional theory (DFT) calculations indicated a flat adsorption geometry of the molecule on the Ag surface. In this article we extend that work to the study of related protoberberine alkaloids, palmatine, jatrorrhizine, and coptisine. The same adsorption geometry as in berberine was deduced. We found that the four alkaloids, although minimally different in their chemical structures, could be differentiated by the position of marker bands. Those bands are the most enhanced ones in the SERS spectra, which appear in the 700–800 cm⁻¹ region. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental and statistical analysis methods for peptide detection using surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) has the potential to make a significant impact in biology research due to its ability to provide information orthogonal to that obtained by traditional techniques such as mass spectrometry (MS). While SERS has been well studied for its use in chemical applications, detailed investigations with biological molecules are less common. In addition, a clear understanding of how methodology and molecular characteristics impact the intensity, the number of peaks, and the signal‐to‐noise of SERS spectra is largely missing. By varying the concentration and order of addition of the SERS‐enhancer salt (LiCl) with colloidal silver, we were able to evaluate the impact of these variables on peptide spectra using a quantitative measure of spectra quality based on the number of peaks and peak intensity. The LiCl concentration and order of addition that produced the best SERS spectra were applied to a panel of synthetic peptides with a range of charges and isoelectric points (pIs) where the pI was directly correlated with higher spectral quality. Those peptides with moderate to high pIs and spectra quality scores were differentiated from each other using the improved method and a hierarchical clustering algorithm. In addition, the same method and algorithm was applied to a set of highly similar phosphorylated peptides, and it was possible to successfully classify the majority of peptides on the basis of species‐specific peak differences. Copyright © 2008 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering from gold‐coated germanium oxide nanowires

We utilized bulk‐synthesized nanowires (NWs) of germanium dioxide as nanoscale structures that can be coated with noble metals to allow the excitation of surface plasmons over a broad frequency range. The NWs were synthesized on substrates of silicon using gold‐catalyst‐assisted vapor–liquid–solid (VLS) growth mechanism in a simple quartz tube furnace setup. The resulting NWs have diameters of ∼100–200 nm, with lengths averaging ∼10–40 µm and randomly distributed on the substrate. The NWs are subsequently coated with thin films of gold, which provide a surface‐plasmon‐active surface. Surface‐enhanced Raman scattering (SERS) studies with near‐infrared (NIR) excitation at 785 nm show significant enhancement (average enhancement > 10⁶) with good uniformity to detect submonolayer concentrations of 4‐methylbenzenethiol (4‐MBT), trans‐1,2‐bis(4‐pyridyl)ethylene (BPE), and 1,2‐benzendithiol (1,2‐BDT) probe molecules. We also observed an intense, broad continuum in the Raman spectrum of NWs after metal coating, which tended to diminish with the analyte monolayer formation. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of N‐acetylneuraminic acid on silver nanoparticle surface

N‐Acetylneuraminic acid (sialic acid, Neu5Ac) has recently gained interest as a potential marker for a variety of pathophysiological processes, although no Raman study has been reported for this important biomolecule. In this paper, the vibrational properties of Neu5Ac were studied by means of Raman, surface‐enhanced Raman scattering (SERS), and density functional theory calculations. By adsorption of Neu5Ac on silver nanoparticle surface, strongly enhanced Raman intensities are obtained, allowing easy measurement of small amounts of aqueous Neu5Ac (10 µl of a 10⁻⁷ m solution) utilizing low laser power and short exposure time. The mechanism of adsorption of Neu5Ac on the silver surface is discussed on the basis of the experimental and theoretical results. This study demonstrates that SERS can provide an effective tool for development of a label‐free, rapid, and sensitive optical platform for identification of Neu5Ac. Copyright © 2014 John Wiley & Sons, Ltd.