超交联微孔聚合物研究进展

超交联微孔聚合物是一类重要的多孔聚合物材料, 由于其具有高比表面积、合成条件温和、单体来源广泛等优点而成为研究的热点. 根据不同阶段合成方法的差异, 超交联聚合物主要由以下三种方法制备得到: (1)含官能团聚合物前体的后交联; (2)功能化小分子单体的一步法自缩聚; (3)通过外交联剂“编织”刚性的芳香族单体. 本文介绍了超交联聚合物的发展过程, 着重对三种合成超交联聚合物的方法、同时对微孔聚合物微观形貌的控制以及其在气体储存、分离、催化等方面的应用进行了总结. 最后提出了超交联聚合物的缺陷和所面临的挑战, 并对未来超交联微孔聚合物的发展前景进行了展望, 指明了超交联聚合物发展的新方向.     

Simultaneous Detection and Removal of Mercury Ions in Aqueous Solution with Fluorescent Conjugated Polymer‐Based Sensor Ensemble

A water‐soluble, sulfur‐containing fluorescent conjugated polymer exhibits a visible fluorescence color change for detection of mercury in the presence of thymine. A new concept provides the design of a sensor ensemble using a simple combination method. This strategy avoids the need for complicated design and synthesis of a recognition group, eliminating the tedious synthetic efforts for the preparation of a sensor material.

     

Triarylboron‐Linked Conjugated Microporous Polymers: Sensing and Removal of Fluoride Ions

A luminescent conjugated microporous polymer (BCMP‐3) has been synthesized in high yield by a carbon–carbon coupling reaction using triarylboron as a building unit. BCMP‐3 was fully characterized by using powder X‐ray diffraction analysis, Fourier transform infrared spectroscopy, ¹³C solid‐state NMR spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen and carbon dioxide adsorption. The new three‐dimensional conjugated framework possess a high Brunauer–Emmett–Teller (BET) specific surface area up to 950 m² g^?1 with a pore volume of 0.768 cm³ g^?1, good stability, and abundant boron sites in the skeleton. Under excited‐light irradiation, BCMP‐3 exhibits strong fluorescent emission at 488 nm with a high absolute quantum yield of 18 % in the solid state. Polymer BCMP‐3 acts as a colorimetric and fluorescent chemosensor with high sensitivity and selectivity for F^? over other common anions. In addition, the polymer also works as an adsorbent for F^? removal and shows good adsorption capacities of up to 24 mg g^?1 at equilibrium F^? concentrations of 16 mg L^?1 and a temperature of 298 K. The adsorption kinetics and isotherm were analyzed by fitting experimental data with pseudo‐second‐order kinetics and Langmuir equations. Furthermore, we highlight that BCMP‐3 is an adsorbent for fluoride removal that can be efficiently reused many times without loss of adsorption efficiency.     

共轭微孔聚合物的制备与应用

共轭微孔聚合物(CMPs)是一类有机多孔聚合物,与常规共轭聚合物或多孔材料相比,其最大的特点是既有π共轭骨架又具有大量微孔.这类材料在解决能源和环境问题方面显示出巨大的潜力,已在气体吸附、非均相催化、发光材料、化学传感器、电能存储和生物杂化物等领域显示出巨大的应用前景.目前已开发出多种用于CMPs结构单元设计与合成的新...     

Bimodal Heterogeneous Functionality in Redox-Active Conjugated Microporous Polymer toward Electrocatalytic Oxygen Reduction and Photocatalytic Hydrogen Evolution

The designing and development of heterogeneous catalysts for conversion of renewable energy to chemical energies by electrochemical as well as photochemical processes is at the forefront of energy research. In this work, two new donor–acceptor-based redox-active conjugated microporous polymers (CMPs) (TAPA-OPE-mix and TAPA-OPE-gly) are synthesized through Schiff base condensation reaction using a microwave synthesizer. Notably, the asymmetric and symmetric bola-amphiphilic nature of the OPE struts results in distinct nanostructuring and morphologies in the CMPs. Interestingly, both CMPs show impressive heterogeneous catalytic activity toward electrochemical O₂ reduction and photocatalytic H₂ evolution reactions, and therefore, act as bimodal electro- and photocatalytic porous organic materials. Furthermore, the redox-active property of the CMPs is exploited for in situ generation and stabilization of platinum nanoparticles (Pt), and these Pt@CMPs exhibit significantly enhanced photocatalytic activity.     

芘基共轭微孔聚合物用于锂离子电池电极材料性能研究

共轭微孔聚合物由于其高的比表面积、优良的物理化学稳定性以及沿分子链延伸的共轭结构等特点,使其在锂离子电池电极材料方面具有巨大的应用前景.本工作以四溴芘和对苯二硼酸为构建单元,通过Suzuki偶联反应合成了具有高比表面积的芘基共轭微孔聚合物PyDB,并研究了其作为锂离子电池电极材料的电化学性能.当PyDB用作锂离子电池正极材料时,在50 mA·g^-1的电流密度下,放电容量达到163 mAh·g^-1,即使在3000 mA·g^-1的电流密度下仍具有62 mAh·g^-1的可逆容量,在100 mA·g^-1的电流密度下循环300次仍具有167 mAh·g^-1的容量.当该聚合物用作负极材料时,在50 mA·g^-1电流密度下的放电容量达到495 mAh·g^-1,在200 mA·g^-1的电流密度下循环300次,仍具有245 mAh·g^-1的容量.PyDB优异的电化学性能主要归因于其延伸的共轭结构和高比表面积的多孔结构,大的共轭结构有利于分子链的掺杂反应和电子传导,高比表面积的多孔结构有利于提供大量的活性位点并促进离子的迁移.     

Controlled Synthesis of Conjugated Microporous Polymer Films: Versatile Platforms for Highly Sensitive and Label‐Free Chemo‐ and Biosensing

Conjugated microporous polymers (CMPs), in which rigid building blocks form robust networks, are usually synthesized as insoluble and unprocessable powders. We developed a methodology using electropolymerization for the synthesis of thin CMP films. The thickness of these films is synthetically controllable, ranging from nanometers to micrometers, and they are obtained on substrates or as freestanding films. The CMP films combine a number of striking physical properties, including high porosity, extended π conjugation, facilitated exciton delocalization, and high‐rate electron transfer. We explored the CMP films as versatile platforms for highly sensitive and label‐free chemo‐ and biosensing of electron‐rich and electron‐poor arenes, metal ions, dopamine, and hypochloroic acid, featuring rapid response, excellent selectivity, and robust reusability.     

Amplified Fluorescence Turn‐On Assay for Mercury(II) Detection and Quantification based on Conjugated Polymer and Silica Nanoparticles

An amplified fluorescence turn‐on assay for mercury(II) detection and quantification was developed. This method makes use of specific thymine/mercury(II)/thymine coordination to capture Fl‐labeled DNA onto NP surface. Addition of a cationic conjugated polymer leads to an amplified Fl signal in solution. A sigmoidal Hg²⁺ working curve is obtained at fixed [NP] with a detection limit of 0.1 × 10⁻⁶ M . However, by reducing [Hg²⁺] and [NP] simultaneously, while maintaining [Hg²⁺]:[DNA duplex] = 3:1, a linear calibration curve is observed with a detection limit of 5 × 10⁻⁹ M . The CCP‐assisted mercury(II) assay shows potential applications in environmental mercury detection and for industrial process control.

     

Nanoparticulate Conjugated Microporous Polymer with Post-Modified Benzils for Enhanced Pseudocapacitor Performance

Conjugated microporous polymer (CMP)-based energy-storage materials were developed for pseudocapacitors. Nanoparticulate CMP (N-CMP) with an average diameter of 41±4 nm was prepared through kinetic growth control in the Sonogashira coupling of 1,3,5-triethynylbenzene with 1,4-diiodobenzene. The N-CMP is rich in a diphenylacetylene moiety in its chemical structure. Through the FeCl₃-catalyzed oxidation of diphenylacetylene moieties, N-CMP with benzil moieties (N-CMP-BZ) was prepared and showed enhanced electrochemical performance as an electrode material of pseudocapacitors, compared with CMP, CMP-BZ, and N-CMP. In model studies, the benzil was redox active and showed two-electron reduction behavior. The excellent electrochemical performance of N-CMP-BZ is attributable to the enhanced utilization of functional sites by a nanosize effect and the additional redox contribution of benzil moieties.     

共轭微孔聚合物膜的制备策略及其分离应用

降低工业分离过程的能耗为缓解全球能源紧缺问题提供了有效途径. 相比传统工业分离技术, 膜分离技术能耗低、经济效益高, 开发高效的膜材料是提升膜分离性能的重要手段. 共轭微孔聚合物(CMP)膜具有刚性永久超微孔道、高孔隙率、孔结构及化学环境可调控、交联骨架稳定性好等优势, 在分离领域具有良好的应用前景. 概述了近年来CMP膜的制备方法并简要对比了其优缺点, 阐述了CMP膜在气体分离、有机溶剂纳滤、离子筛分和手性分离等领域的分离机理和研究进展, 为开发新型具有良好分离性能的CMP膜材料提供研究思路.     

Reversible Doping of a Dithienothiophene‐Based Conjugated Microporous Polymer

Dithienothiophene (DTT) based conjugated microporous polymers (CMPs) were synthesized by bulk and electrochemical oxidative polymerizations. Spectroelectrochemical measurements showed that DTT‐CMP can be reversibly oxidized and reduced, accompanied by a significant change of the absorption properties making the material interesting for electrochromic devices. Reversible doping and dedoping of the bulk polymer network was also observed using iodine and ammonia, respectively. Nitrogen gas sorption measurements of the neutral, doped, and dedoped polymer networks indicated the presence of iodide species within the pores, and the conductivity of the networks is highly increased upon doping with iodine. The introduction of the strong electron donor DTT into a conjugated porous network, and the ability for redox switching, make DTT‐CMPs interesting materials for organo(opto)electronic devices and sensors.     

A Tetrathiafulvalene (TTF)‐Conjugated Microporous Polymer Network

Conjugated microporous polymer networks have been prepared from the strong electron donor tetrathiafulvalene (TTF) and 1,3,5‐triethynylbenzene (TEB) by using the Sonogashira–Hagihara cross‐coupling reaction. Optimization of reaction conditions yields polymers with surface areas of up to 434 m² g^?1. The strong electron‐donating properties of the network can be proven by iodine exposure. Structural and electronic changes due to formation of the charge‐transfer salt from TTFs in the porous network and iodine within the pores are investigated.     

Tunable Surface Area,Porosity, and Function in Conjugated Microporous Polymers

Simple inorganic salts are used to tune N‐containing conjugated microporous polymers (CMPs) synthesized by Buchwald–Hartwig (BH) cross‐coupling reactions. Poly(triphenylamine), PTPA, initially shows a broad distribution of micropores, mesopores, and macropores. However, the addition of inorganic salts affects all porous network properties significantly: the pore size distribution is narrowed to the microporous range only, mimicking COFs and MOFs; the BET surface area is radically improved from 58 m² g^?1 to 1152 m² g^?1; and variations of the anion and cation sizes are used to fine‐tune the surface area of PTPA, with the surface area showing a gradual decrease with an increase in the ionic radius of salts. The effect of the salt on the physical properties of the polymer is attributed to adjusting and optimizing the Hansen solubility parameters (HSPs) of solvents for the growing polymer, and named the Beijing–Xi'an Jiaotong (BXJ) method.     

自由基修饰共轭微孔聚合物应用于5-羟甲基糠醛选择性氧化

采用有机单体侧链嫁接2,2,6,6-四甲基哌啶氧自由基（2,2,6,6-tetramethylpiperidineoxyl,TEMPO）的策略将TEMPO嫁接到2,5-二溴苯甲酸侧链,并与四（4-乙炔基苯）甲烷通过Sonogashira偶联反应,构筑TEMPO自由基功能化共轭微孔聚合物CMP-4-TEMPO.利用核磁共振谱（NMR）、扫描电子显微镜（SEM）、粉末X-射线衍射（XRD）红外吸收光谱（FT-IR）和电子顺磁共振谱（EPR）等技术研究了所合成单体及CMP形貌和结构.催化性能测试结果表明CMP-4-TEMPO可将5-羟甲基糠醛（5-HMF）高效、高选择性氧化成高附加值2,5-二甲酰基呋喃（2,5-DFF）.CMP-4-TEMPO催化剂循环利用10次仍保持较高的转化率.提出了CMP-4-TEMPO中形成TEMPO氧正离子是实现5-HMF转化为2,5-DEF的催化氧化机理.CMP-4-TEMPO有望成为各种醇高效、高选择性氧化以及可循环利用的异相催化剂.     

A Water‐Soluble Conjugated Polymer for Protein Identification and Denaturation Detection

Rapid and sensitive methods to detect proteins and protein denaturation have become increasingly needful in the field of proteomics, medical diagnostics, and biology. In this paper, we have reported the synthesis of a new cationic water‐soluble conjugated polymer that contains fluorene and diene moieties in the backbone ( PFDE ) for protein identification by sensing an array of PFDE solutions in different ionic strengths using the linear discriminant analysis technique (LDA). The PFDE can form complexes with proteins by electrostatic and/or hydrophobic interactions and exhibits different fluorescence response. Three main factors contribute to the fluorescence response of PFDE , namely, the net charge density on the protein surface, the hydrophobic nature of the protein, and the metalloprotein characteristics. The denaturation of proteins can also be detected using PFDE as a fluorescent probe. The interactions between PFDE and proteins were also studied by dynamic light scattering (DLS) and isothermal titration microcalorimetry (ITC) techniques. In contrast to other methods based on conjugated polymers, the synthesis of a series of quencher or dye‐labeled acceptors or protein substrates has been avoided in our method, which significantly reduces the cost and the synthetic complexity. Our method provides promising applications on protein identification and denaturation detection in a simple, fast, and label‐free manner based on non‐specific interaction‐induced perturbation of PFDE fluorescence response.     

π‐Conjugated Microporous Polymer Films: Designed Synthesis,Conducting Properties,and Photoenergy Conversions

Conjugated microporous polymers are a unique class of polymers that combine extended π‐conjugation with inherent porosity. However, these polymers are synthesized through solution‐phase reactions to yield insoluble and unprocessable solids, which preclude not only the evaluation of their conducting properties but also the fabrication of thin films for device implementation. Here, we report a strategy for the synthesis of thin films of π‐conjugated microporous polymers by designing thiophene‐based electropolymerization at the solution–electrode interface. High‐quality films are prepared on a large area of various electrodes, the film thickness is controllable, and the films are used for device fabrication. These films are outstanding hole conductors and, upon incorporation of fullerenes into the pores, function as highly efficient photoactive layers for energy conversions. Our film strategy may boost the applications in photocatalysis, energy storage, and optoelectronics.     

Recent Development of Hypercrosslinked Microporous Organic Polymers

Hypercrosslinked polymers (HCPs) are currently receiving great interest due to their easy preparation, high chemical and thermal stability, and low cost. Combined with the lightweight properties and high surface areas HCPs can be considered as promising materials for gas storage and separation, catalysis, and heavy metal ions removal in wastewater treatment. This Feature Article summarizes strategies for the preparation of HCPs, comprising the post‐crosslinking of “Davankov‐type” resins, direct polycondensation of aromatic chloromethyl (or hydroxymethyl) monomers, and knitting aromatic compound polymers (KAPs). The HCPs applications, such as H₂ storage, CO₂ capture, and heterogeneous catalysis, are also discussed throughout in the article. Finally, the outlook of this research area is given.     

Highly Selective Fluorescence Detection for Mercury (II) Ions in Aqueous Solution Using Water Soluble Conjugated Polyelectrolytes

A highly selective assay method has been developed to detect mercury (II) (Hg²⁺) ions using cationic conjugated polymer (CCP). The transduction mechanism is based on a Hg²⁺ promoted reaction. In the absence of Hg²⁺ ions, the CCP can form the complex with an anionic 1,3‐dithiole‐2‐thione derivative through electrostatic interactions. The fluorescence of CCP is efficiently quenched by 1,3‐dithiole‐2‐thione derivative via an electron transfer process. Upon adding Hg²⁺ ions, the transformation of 1,3‐dithiole‐2‐thione into 1,3‐dithiole‐2‐one inhibits the quenching, and the fluorescence of CCP is recovered. Distinguishing aspects of this assay include the signal amplification of CCPs and a specific Hg²⁺ promoted reaction. By triggering the change in the emission intensity of CCP, it is possible to detect Hg²⁺ ions in aqueous solution.

     

Ultrastable Conjugated Microporous Polymers Containing Benzobisthiadiazole and Pyrene Building Blocks for Energy Storage Applications

In recent years, conjugated microporous polymers (CMPs) have become important precursors for environmental and energy applications, compared with inorganic electrode materials, due to their ease of preparation, facile charge storage process, π-conjugated structures, relatively high thermal and chemical stability, abundance in nature, and high surface areas. Therefore, in this study, we designed and prepared new benzobisthiadiazole (BBT)-linked CMPs (BBT–CMPs) using a simple Sonogashira couplings reaction by reaction of 4,8-dibromobenzo(1,2-c;4,5-c′)bis(1,2,5)thiadiazole (BBT–Br₂) with ethynyl derivatives of triphenylamine (TPA-T), pyrene (Py-T), and tetraphenylethene (TPE-T), respectively, to afford TPA–BBT–CMP, Py–BBT–CMP, and TPE–BBT–CMP. The chemical structure and properties of BBT–CMPs such as surface areas, pore size, surface morphologies, and thermal stability using different measurements were discussed in detail. Among the studied BBT–CMPs, we revealed that TPE–BBT–CMP displayed high degradation temperature, up to 340 °C, with high char yield and regular, aggregated sphere based on thermogravimetric analysis (TGA) and scanning electron microscopy (SEM), respectively. Furthermore, the Py–BBT–CMP as organic electrode showed an outstanding specific capacitance of 228 F g⁻¹ and superior capacitance stability of 93.2% (over 2000 cycles). Based on theoretical results, an important role of BBT–CMPs, due to their electronic structure, was revealed to be enhancing the charge storage. Furthermore, all three CMP polymers featured a high conjugation system, leading to improved electron conduction and small bandgaps.