For the first time, it is demonstrated that thermal field‐flow fractionation (ThFFF) is an efficient tool for the fractionation of polyisoprene (PI) and polybutadiene (PB) with regard to molecular microstructure. ThFFF analysis of 1,4‐ and 3,4‐PI as well as 1,4‐ and 1,2‐PB samples in tetrahydrofuran (THF), THF/cyclohexane, and cyclohexane reveals that isomers of the same polymer family having similar molar masses exhibit different Soret coefficients depending on microstructure for each solvent. The separation according to microstructure is found to be based on the cooperative influence of the normal and the thermal diffusion coefficient. Of the three solvents, cyclohexane has the greatest influence on the fractionation of the isomers. In order to determine the distribution of isomeric structures in the PI and PB samples, the samples are fractionated by ThFFF in cyclohexane and subsequently analyzed by 1H NMR. The isomeric distributions determined from NMR data correlate well with ThFFF retention data of the samples and thus further highlight the unique fractionating capabilities of ThFFF. The interplay of the normal and thermal diffusion coefficients that are influenced by temperature and the mobile phase opens the way to highly selective fractionations without the drawbacks of column‐based separation methods.
A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
A novel one‐component type II polymeric photoinitiator, poly(vinyl alcohol)–thioxanthone (PVA–TX), is synthesized by a simple acetalization process and characterized. PVA–TX enables photopolymerization of methyl methacrylate and acrylamide in both organic and aqueous media. Photopolymerization proceeds even in the absence of a co‐initiator since PVA–TX possesses both chromophoric and hydrogen donating sites in the structure.
Ethylene–propylene–methyl methacrylate (MMA) and ethylene–hexene–MMA A‐B‐C block copolymers with high molecular weight (>100 000) are synthesized using fluorenylamide‐ligated titanium complex activated by modified methylaluminoxane and 2,6‐di‐tert‐butyl‐4‐methylphenol for the first time. After diblock copolymerization of olefin is conducted completely, MMA is added and activated by aluminum Lewis acid to promote anionic polymerization. The length of polyolefin and poly (methyl methacrylate) (PMMA) is controllable precisely by the change of the additive amount of olefin and polymerization time, respectively. A soft amorphous polypropylene or polyhexene segment is located between two hard segments of semicrystalline polyethylene and glassy PMMA blocks.
Polyethers—polymers with the structural element (R'‐O‐R)n in their backbone—are an old class of polymers which were already used at the time of the ancient Egyptians. However, still today these materials are highly important with applications in all areas of our life, reaching from the automotive and paper industry to cosmetics and biomedical applications. In this Review, different aliphatic polyethers like poly(epoxide)s, poly(oxetane)s, and poly(tetrahydrofuran) are discussed. Special emphasis is placed on the history, the polymerization techniques (industrially and in academia), the properties, the applications as well as recent developments of these materials.
A facile and universal method is presented for the preparation of polymer brushes on amorphous TiO2 film. Homogeneous and stable poly(methyl methacrylate), polystyrene, poly(4‐vinylpyridine), and poly(N‐vinyl imidazole) (PNVI) brushes up to 550 nm are directly created onto TiO2 via UV‐induced photopolymerization of corresponding monomers. Kinetic studies reveal a linear increase in thickness with the polymerization time. Characterization of the resulting polymer brushes by FTIR spectroscopy, X‐ray photoelectron spectroscopy, contact angle, and atomic force microscopy (AFM) indicates an efficient UV‐grafting reaction. Finally, we have demonstrated the possibility in converting the PNVI brushes to poly(vinyl imidazolium bromide), i.e., poly(ionic liquid) brushes by polymer–analogous reactions.
Porous polymer membranes made via electrostatic complexation are fabricated from a water‐soluble poly(ionic liquid) (PIL) for the first time. The porous structure is formed as a consequence of simultaneous phase separation of the PIL and ionic complexation with an acid, which occurred in a basic solution of a nonsolvent for the PIL. These membranes have a stimuli‐responsive porosity, with open and closed pores in isopropanol and in water, respectively. This property is quantitatively demonstrated in filtration experiments, where water is passing much slower through the membranes than isopropanol.
Herein, a novel photoinitiated polymerization‐induced self‐assembly formulation via photoinitiated reversible addition–fragmentation chain transfer dispersion polymerization of glycidyl methacrylate (PGMA) in ethanol–water at room temperature is reported. It is demonstrated that conducting polymerization‐induced self‐assembly (PISA) at low temperatures is crucial for obtaining colloidal stable PGMA‐based diblock copolymer nano‐objects. Good control is maintained during the photo‐PISA process with a high rate of polymerization. The polymerization can be switched between “ON” and “OFF” in response to visible light. A phase diagram is constructed by varying monomer concentration and degree of polymerization. The PGMA‐based diblock copolymer nano‐objects can be further cross‐linked by using a bifunctional primary amine reagent. Finally, silver nanoparticles are loaded within cross‐linked vesicles via in situ reduction, exhibiting good catalytic properties.
Novel thermosensitive nanocomposite (NC) hydrogels consisting of organic/inorganic networks are prepared via in situ free radical polymerization of 2‐(2‐methoxyethoxy) ethyl methacrylate (MEO2MA) and oligo(ethylene glycol) methacrylate (OEGMA) in the presence of inorganic cross‐linker clay in aqueous solution. The obtained clay/P(MEO2MA‐co‐OEGMA) hydrogels exhibit double volume phase transition temperatures, an upper critical solution temperature (UCST), and a lower critical solution temperature (LCST), which can be controlled between 5 and 85 °C by varying the fraction of OEGMA units and the weight percentage of cross‐linker clay. These new types of NC hydrogels with excellent reversible thermosensitivity are promising for temperature‐sensitive applications such as smart optical switches.
The formation of a poly(2,6‐carbazole) derivative during an electrochemical polymerization process is shown. Comparison of 3,5‐bis(9‐octyl‐9H‐carbazol‐2‐yl)pyridine and 3,5‐bis(9‐octyl‐9H‐carbazol‐3‐yl)pyridine by electrochemical and UV–Vis‐NIR spectroelectrochemical measurements and DFT (density functional theory) calculation prove the formation of a poly(2,6‐carbazole) derivative. Both of the compounds form stable and electroactive conjugated polymers.
The controlled synthesis of poly(oligo(2‐ethyl‐2‐oxazoline)methacrylate) (P(OEtOxMA)) polymers by Cu(0)‐mediated polymerization in water/methanol mixtures is reported. Utilizing an acetal protected aldehyde initiator for the polymerization, well‐defined polymers are synthesized (>99% conversion, Ð < 1.25) with subsequent postpolymerization deprotection resulting in α‐aldehyde end group containing comb polymers. These P(OEtOxMA) are subsequently site‐specifically conjugated, via reductive amination, to a dipeptide (NH2‐Gly‐Tyr‐COOH) as a model peptide, prior to conjugation to the functional peptide oxytocin. The resulting oxytocin conjugates are evaluated in comparison to poly(oligo(ethylene glycol) methyl ether methacrylate) combs synthesized in the same manner for potential effects on thermal stability in comparison to the native peptide.
Solvent vapor annealing (SVA) is originally developed to attain equilibrium nanostructures from microphase‐separated block polymer thin films. Interestingly, by carefully choosing a solvent vapor that can selectively mobilize the amorphous chains of a semicrystalline polymer while preserving the integrity of its crystalline structure, this study demonstrates that the SVA method can also be utilized to introduce hierarchical structures onto semicrystalline polymer‐based materials. This study on electrospun poly(ε‐caprolactone) (PCL) fibers clearly shows that acetone, a poor solvent for PCL, can effectively delocalize the amorphous chains and redeposit them onto the pre‐existing crystal edges, giving rise to secondary nanostructures inscribed onto the PCL fibers. In the past decade, various fiber fabrication methods and numerous fiber products are reported. The easy one‐step approach reported here provides new insight into the design and fabrication of structurally hierarchical polymeric materials.
A series of new star‐shaped polymers with a triphenylamine‐based iridium(III) dendritic complex as the orange‐emitting core and poly(9,9‐dihexylfluorene) (PFH) chains as the blue‐emitting arms is developed towards white polymer light‐emitting diodes (WPLEDs). By fine‐tuning the content of the orange phosphor, partial energy transfer and charge trapping from the blue backbone to the orange core is realized to achieve white light emission. Single‐layer WPLEDs with the configuration of ITO (indium‐tin oxide)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/polymer/CsF/Al exhibit a maximum current efficiency of 1.69 cd A−1 and CIE coordinates of (0.35, 0.33), which is very close to the pure white‐light point of (0.33, 0.33). To the best of our knowledge, this is the first report on star‐shaped white‐emitting single polymers that simultaneously consist of fluorescent and phosphorescent species.
A commercially available palladium N‐heterocyclic carbene (Pd‐NHC) precatalyst is used to initiate chain‐growth polymerization of 2‐bromo‐3‐hexyl‐5‐trimethylstannylthiophene. The molecular weight of the resultant poly(3‐hexylthiophene) can be modulated (7 to 73 kDa, Đ = 1.14 to 1.53) by varying the catalyst concentration. Mass spectrometry data confirm control over the polymer end groups and 1H NMR spectroscopy reveals that the palladium catalyst is capable of “ring‐walking”. A linear relationship between Mn and monomer conversion is observed. Atomic force microscopy and X‐ray scattering verify the regioregular nature of the resultant polythiophene.
In this communication, a mild, efficient, and generalized polycondensation route is developed for poly(disulfide)s from commercially available monomers 2,2′‐dithiodipyridine and 1,6‐hexanedithiol. Using the stoichiometric imbalance between the two monomers, it is possible to produce telechelic poly(disulfide)s of predictable molecular weight with reactive pyridyl disulfide groups at both the terminals of the chain. The two terminal pyridyl disulfide groups can be quantitatively replaced by a functional thiol using selective thiol‐disulfide exchange and thus produces functional telechelic poly(disulfide)s, which can be used as a macroinitiator to initiate ring‐opening polymerization of a cyclic lactide monomer generating an ABA‐type triblock copolymer with degradable B block.
This paper reports the use of polyhedral oligomeric silsesquioxane (POSS)‐based copolymers to stabilize the core/shell interface for the facile fabrication of electrospun core/shell fibers. For the poly[(propylmethacryl‐heptaisobutyl‐polyhedral oligomeric silsesquioxane)‐co‐(methyl methacrylate)] (POSS‐MMA)/poly(ε‐caprolactone) (PCL) system, the bicontinuity of hybrid core/shell fibers can be tuned by controlling the phase separation of POSS‐MMA/PCL in electrospinning solutions and therefore the size of PCL‐in‐POSS‐MMA emulsion droplets. Our results demonstrate the enhanced encapsulation capacity of POSS‐MMA copolymers as shell materials. Taking advantage of the rapid advancement of POSS‐based copolymer synthesis, this study can potentially be generalized to guide the fabrication of various other POSS‐based core/shell nano‐/microstructures by using single‐nozzle electrospinning or coaxial electrospinning.
The performance of polymer field‐effect transistors (PFETs) based on short rigid rod semiconducting poly(2,5‐didodecyloxy‐p‐phenyleneethynylene) (D‐OPPE) is highlighted. The controlled heating and cooling of thin films of D‐OPPE allows for a recrystallization from the melt, boosting the performance of D‐OPPE‐based transistors. The improved film properties induced by controlled annealing lead to a hole field‐effect mobility around 0.014 cm2 V−1 s−1, an on/off ratio of 106, a sub‐threshold swing of 3 V dec−1 and a threshold voltage of −35 V, employing a poly(methyl methacrylate) (PMMA) gate dielectric. Thus, PFETs out of D‐OPPE compete now with spin‐coated, polycrystalline poly(3‐hexylthiophene)‐based PFETs.
Chirality is one of the most fascinating and ubiquitous features in nature, especially in biological systems. The effects of chiral surfaces, especially in combination with degradable materials of good biocompatibility, on stem cell behaviors has not yet been tackled. In this communication, the chiral monomers N‐acryloyl‐l (d )‐valine (l (d )‐AV) are synthesized and are polymerized to obtain chiral (l (d )‐PAV‐SH) oligomers, which are covalently immobilized onto electron‐deficient poly(propylene fumarate) polyurethane (PPFU) via Michael addition. The PPFU‐l ‐PAV can interact more strongly and actively with bone marrow stem cells (BMSCs) than PPFU‐d ‐PAV, leading to a larger cell spreading area, faster migration velocity, and stronger osteodifferentiation tendency.
Nitroxide‐mediated polymerization (NMP) is one of the most powerful reversible deactivation radical polymerization techniques and has incredibly gained in maturity and robustness over the last decades. However, control of methacrylic esters is one of the different aspects of NMP that still requires improvement. This family of monomers always represented an important challenge for NMP, despite the many different nitroxide structures that have been designed over the course of time. This Review aims to present the most successful strategies directed toward the control of the NMP technique of methacrylic esters and especially methyl methacrylate. NMP‐derived materials comprising uncontrolled methacrylate segments will also be discussed.
