The synthesis of symmetric cyclo poly(ε‐caprolactone)–block–poly(l (d )‐lactide) (c(PCL–b–PL(D)LA)) by combining ring‐opening polymerization of ε‐caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self‐assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL‐b‐PDLA and PCL‐b‐PLLA copolymers.
This paper reports the use of polyhedral oligomeric silsesquioxane (POSS)‐based copolymers to stabilize the core/shell interface for the facile fabrication of electrospun core/shell fibers. For the poly[(propylmethacryl‐heptaisobutyl‐polyhedral oligomeric silsesquioxane)‐co‐(methyl methacrylate)] (POSS‐MMA)/poly(ε‐caprolactone) (PCL) system, the bicontinuity of hybrid core/shell fibers can be tuned by controlling the phase separation of POSS‐MMA/PCL in electrospinning solutions and therefore the size of PCL‐in‐POSS‐MMA emulsion droplets. Our results demonstrate the enhanced encapsulation capacity of POSS‐MMA copolymers as shell materials. Taking advantage of the rapid advancement of POSS‐based copolymer synthesis, this study can potentially be generalized to guide the fabrication of various other POSS‐based core/shell nano‐/microstructures by using single‐nozzle electrospinning or coaxial electrospinning.
To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)‐co‐(glycolic acid)] (P(EG‐co‐GA)) via a ruthenium‐catalyzed, post‐polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG‐co‐GA) copolymers are shown to undergo hydrolysis under mild conditions.
Solvent vapor annealing (SVA) is originally developed to attain equilibrium nanostructures from microphase‐separated block polymer thin films. Interestingly, by carefully choosing a solvent vapor that can selectively mobilize the amorphous chains of a semicrystalline polymer while preserving the integrity of its crystalline structure, this study demonstrates that the SVA method can also be utilized to introduce hierarchical structures onto semicrystalline polymer‐based materials. This study on electrospun poly(ε‐caprolactone) (PCL) fibers clearly shows that acetone, a poor solvent for PCL, can effectively delocalize the amorphous chains and redeposit them onto the pre‐existing crystal edges, giving rise to secondary nanostructures inscribed onto the PCL fibers. In the past decade, various fiber fabrication methods and numerous fiber products are reported. The easy one‐step approach reported here provides new insight into the design and fabrication of structurally hierarchical polymeric materials.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
Molecular bottle‐brush functionalized single‐walled carbon nanotubes (SWCNTs) with superior dispersibility in water are prepared by a one‐pot synthetic methodology. Elongating the main‐chain and side‐chain length of molecular bottle‐brushes can further increase SWCNT dispersibility. They show significant enhancement of SWCNT dispersibility up to four times higher than those of linear molecular functionalized SWCNTs.
This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.
Star copolymers are known to phase separate on the nanoscale, providing useful self‐assembled morphologies. In this study, the authors investigate synthesis and assembly behavior of miktoarm star (μ‐star) copolymers. The authors employ a new strategy for the synthesis of unprecedented μ‐star copolymers presenting poly(N‐octyl benzamide) (PBA) and poly(ε‐caprolactone) (PCL) arms: a combination of chain‐growth condensation polymerization, styrenics‐assisted atom transfer radical coupling, and ring‐opening polymerization. Gel permeation chromatography, mass‐analyzed laser desorption/ionization mass spectrometry, and 1H NMR spectroscopy reveal the successful synthesis of a well‐defined (PBA11)2‐(PCL15)4 μ‐star copolymer (M n,NMR ≈ 12 620; Đ = 1.22). Preliminary examination of the PBA2PCL4 μ‐star copolymer reveals assembled nanofibers having a uniform diameter of ≈20 nm.
Copolymers of 2‐(N,N‐dimethylamino)ethyl acrylate (DMAEA) and 2‐(tert‐Boc‐amino)ethyl acrylate (t BocAEA) are synthesized by reversible addition–fragmentation chain transfer polymerization in a controlled manner with defined molar masses and narrow molar masses distributions (Ð ≤ 1.17). Molar compositions of the P(DMAEA‐co‐t BocAEA) copolymers are assessed by means of 1H NMR. A complete screening in molar composition is studied from 0% of DMAEA to 100% of DMAEA. Reactivity ratios of both comonomers are determined by the extended Kelen–Tüdos method (r DMAEA = 0.81 and rtBocAEA = 0.99).
High molecular weight cyclic poly(ε‐caprolactone)s (cPCLs) with variable ring size are synthesized via light‐induced ring closure of α,ω‐anthracene‐terminated PCL (An‐PCL‐An). The ring size of cPCL is tunable simply by adjusting the polymer concentration from 10 to 100 mg mL−1 in THF. The cycloaddition via the bimolecular cyclization of An‐PC‐An is well characterized by a variety of analyses such as 1H NMR and UV–vis spectroscopies, gel‐permeation chromatography, and differential scanning calorimetry. The reversible dimerization of An induced by heating enables the cyclic PCL to have a switchable “on–off” capability. This novel light‐induced ring‐closure technique can be one of the most powerful candidates for producing various well‐defined cyclic polymers in highly concentrated polymer solution.
Three‐ and four‐arm star shaped polymers, as well as diblock copolymers, are synthesized via acyclic diene metathesis (ADMET) polymerization. This is accomplished by using an asymmetric α,ω‐diene containing a terminal double bond and an acrylate, which is polymerized in the presence of multifunctional acrylates as selective and irreversible chain transfer agents using Hoveyda‐Grubbs second generation catalyst. High cross‐metathesis selectivities are achieved at low temperatures enabling good control over molecular weights. Furthermore, additional polyethyleneglycol (PEG) blocks are attached to these polymers via Heck coupling of the acrylate end‐groups of these polymers with aryl iodide functionalized PEG, obtaining three‐ and four‐arm star shaped di‐ and triblock copolymers with molecular weights up to 31 kDa.
Photodegradable physically cross‐linked polymer networks are prepared from self‐assembly of photolabile triblock copolymers. Linear triblock copolymers composed of poly (o‐nitrobenzyl methacrylate) and poly(ethylene glycol) (PEG) segments of variable molecular weights were synthesized using atom transfer radical polymerization. Triblock polymers with low‐molecular‐weight PEG segments form solid films upon hydration with robust mechanical properties including a Young's modulus of 76 ± 12 MPa and a toughness of 108 ± 31 kJ m−3. Triblock polymers with high‐molecular‐weight PEG segments form physically cross‐linked hydrogels at room temperature with a dynamic storage modulus of 13 ± 0.6 kPa and long‐term stability in hydrated environments. Both networks undergo photodegradation upon irradiation with long wave UV light.
(Co)Polymers containing pentafluorophenylacetylene (F5PA) have been prepared for the first time mediated by [Rh(nbd)Cl]2/NEt3 to give materials with properties typical of poly(phenylacetylene)s prepared with this catalyst/co‐catalyst combination. It is demonstrated that the F5PA repeat units in these new (co)polymers serve as convenient reactive species for post‐polymerization modification with thiols via para‐fluoro aromatic nucleophilic substitution reactions to give an entirely new family of novel thioether‐functional polyene materials accompanied by absorption maxima shifts of up to 130 nm. Finally, the electrochemical properties of these new fluorinated polyene materials are briefly examined and the distinct difference in behavior of the F5PA homopolymer versus polyphenylacetylene, copolymers, and functional derivatives is highlighted.
Herein, for rate‐tunable controlled release, the authors report a new facile method to prepare multiresponsive amphiphilic supramolecular diblock copolymers via the cooperative complexation between a water‐soluble pillar[10]arene and paraquat‐containing polymers in water. This supramolecular diblock copolymer can self‐assemble into multiresponsive polymeric micelles at room temperature in water. The resultant micelles can be further used in the controlled release of small molecules with tunable release rates depending on the type of single stimulus and the combination of various stimuli.
By simply blending two diblock copolymers with the same chemistry but with different compositions one is able to create well‐defined larger soft nanoparticles as well as bimodal soft nanoparticles. Specifically, blending two diblock copolymers in a solvent good for both blocks followed by a gradual introduction of a non‐solvent results in a mixed micelle, larger than their pure block‐copolymer‐forming micelles. The formation of well‐defined larger micelle is due to the balance between the ability of the mixed micelles to assemble or merge in comparison to their pure diblock copolymer micelles. Evidently, the blending ratio, the mixing protocol, and non‐solvent addition rate are crucial to achieving well‐defined larger or bimodal micelles.
Polyethers—polymers with the structural element (R'‐O‐R)n in their backbone—are an old class of polymers which were already used at the time of the ancient Egyptians. However, still today these materials are highly important with applications in all areas of our life, reaching from the automotive and paper industry to cosmetics and biomedical applications. In this Review, different aliphatic polyethers like poly(epoxide)s, poly(oxetane)s, and poly(tetrahydrofuran) are discussed. Special emphasis is placed on the history, the polymerization techniques (industrially and in academia), the properties, the applications as well as recent developments of these materials.
PEG400 (polyethylene glycol, MW 400) biscyanoacrylate is synthesized and copolymerized with 2‐octyl cyanoacrylate for potential use as bioadhesive. PEG400 biscyanoacrylate is synthesized from the esterification of anthracenyl cyanoacrylic acid where the anthracene unit serves as vinyl‐protecting group. Copolymerization increases the plasticity, mechanical strength, and resilience of the resulted polymer as determined by dynamic mechanical analysis. Peeling test confirms its superior bioadhesive properties. Surface morphology is characterized by SEM imaging. The formulations are cytocompatible and safe. This cyanoacrylate composition may provide improved bioadhesive cyanoacrylates.
The successful chain‐growth copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel‐permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. In addition, the electron transfer mediated “click‐radical” concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well‐defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability.
Reversible addition‐fragmentation chain transfer polymerization yields reactive block copolymers bearing the pentafluorophenyl ester (PFPA) group, and subsequent Click amidation using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl‐ and imidazolium‐functionalized primary amines produces the corresponding functional block copolymers, leading to installation of statistical radical‐ and ionic sites into the PFPA segment. The monolayered thin film devices fabricated using the obtained block copolymers exhibit repeatable switching of electric conductivity (on/off ratio > 103) under a bias voltage, which reveals that the coexistence of radicals and ions in the same spherical domain of the copolymer layer is a prerequisite for repeatable switching memory.
Biodegradable and bioabsorbable poly(lactic acid)s are one of the most important biomedical materials. However, it is difficult to introduce the functional groups into poly(lactic acid)s in order to improve their hydrophilicity and degradation rate. Here the authors describe the synthesis of functionalized cyclic lactide monomer 3,6‐bis(benzyloxymethyl)‐1,4‐dioxane‐2,5‐dione (BnLA) using an advanced synthetic route. Water‐soluble hydroxyl‐functionalized homopoly(lactic acid) (P(OH)LA) is synthesized via ring‐opening polymerization (ROP) of BnLA, followed by a hydrogenolytic deprotection reaction. Amphiphilic diblock poly(lactic acid) (P(OH)LA‐PLA) is synthesized via ROP of DL‐lactide using PBnLA as an initiator, followed by a hydrogenolytic deprotection reaction. P(OH)LA‐PLA is able to form polymeric micelles with the diameter of sub‐100 nm.
