High molecular weight cyclic poly(ε‐caprolactone)s (cPCLs) with variable ring size are synthesized via light‐induced ring closure of α,ω‐anthracene‐terminated PCL (An‐PCL‐An). The ring size of cPCL is tunable simply by adjusting the polymer concentration from 10 to 100 mg mL−1 in THF. The cycloaddition via the bimolecular cyclization of An‐PC‐An is well characterized by a variety of analyses such as 1H NMR and UV–vis spectroscopies, gel‐permeation chromatography, and differential scanning calorimetry. The reversible dimerization of An induced by heating enables the cyclic PCL to have a switchable “on–off” capability. This novel light‐induced ring‐closure technique can be one of the most powerful candidates for producing various well‐defined cyclic polymers in highly concentrated polymer solution.
The controlled synthesis of poly(oligo(2‐ethyl‐2‐oxazoline)methacrylate) (P(OEtOxMA)) polymers by Cu(0)‐mediated polymerization in water/methanol mixtures is reported. Utilizing an acetal protected aldehyde initiator for the polymerization, well‐defined polymers are synthesized (>99% conversion, Ð < 1.25) with subsequent postpolymerization deprotection resulting in α‐aldehyde end group containing comb polymers. These P(OEtOxMA) are subsequently site‐specifically conjugated, via reductive amination, to a dipeptide (NH2‐Gly‐Tyr‐COOH) as a model peptide, prior to conjugation to the functional peptide oxytocin. The resulting oxytocin conjugates are evaluated in comparison to poly(oligo(ethylene glycol) methyl ether methacrylate) combs synthesized in the same manner for potential effects on thermal stability in comparison to the native peptide.
This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.
Sulfonated poly(ether ether ketone) (SPEEK) thin film performs reversible thermochromic property by developing the color to be yellowish at the temperature above 190 °C. The detailed analyses based on temperature‐dependent techniques suggest the thermal treatment inducing the shifting of the hydrogen bond network between the sulfonated group and the hydrated water molecules to the π–π stacking among aromatic rings in SPEEK chains. Although it is general that the polymer chain packing is unfavorable at high temperature, the present work shows a good example that when the polymer chains can form specific molecular interaction, such as π–π stacking, even in harsh thermal treatment, a rearrangement will effectively occur, which leads to an external stimuli‐responsive property.
Binary polystyrene and poly(4‐vinylpyridine) mixed grafted silica nanoparticles (PSt/P4VP‐g‐SNPs) are fabricated using CuI‐catalyzed azide‐alkyne Huisgen cycloaddition (CuAAC) via grafting‐to method. Azide‐terminated PSt and P4VP are synthesized via post‐ and pre‐atom transfer radical polymerization modification, respectively. Then, the polymers are simultaneously anchored onto alkyne‐modified SNPs by CuAAC yielding mixed brushes as shown by Raman spectroscopy, dynamic light scattering, and thermogravimetric analysis. To the best of our knowledge, this is the first report of simultaneously grafting two distinct polymer chains to synthesize mixed grafted silica nanoparticles using CuAAC technique via grafting‐to method.
Investigation into the mussel‐inspired polymerization of dopamine has led to the realization that other compounds possessing potential quinone structures could undergo similar self‐polymerizations in mild buffered aqueous conditions. To this end, 5‐hydroxyindazole was added to a dopamine polymerization matrix in varying amounts, to study its incorporation into a polydopamine coating of silica particles. Solid‐state 13C NMR spectroscopy confirmed the presence of the indazole in the polymer shell when coated onto silica gel. SEM and DLS analysis also confirmed that the presence of the indazole in the reaction matrix yielded monodisperse polymer‐coated particles, which retained their polymer shell upon HF etching, except when high levels of the indazole were used. Characterization data and examination of incorporation mechanism suggests that the 5‐hydroxyindazole performs the function of a chain‐terminating agent. Cytotoxicity studies of the polymer particles containing 5‐hydroxyindazole showed dramatically lower toxicity levels compared to polydopamine alone.
Star copolymers are known to phase separate on the nanoscale, providing useful self‐assembled morphologies. In this study, the authors investigate synthesis and assembly behavior of miktoarm star (μ‐star) copolymers. The authors employ a new strategy for the synthesis of unprecedented μ‐star copolymers presenting poly(N‐octyl benzamide) (PBA) and poly(ε‐caprolactone) (PCL) arms: a combination of chain‐growth condensation polymerization, styrenics‐assisted atom transfer radical coupling, and ring‐opening polymerization. Gel permeation chromatography, mass‐analyzed laser desorption/ionization mass spectrometry, and 1H NMR spectroscopy reveal the successful synthesis of a well‐defined (PBA11)2‐(PCL15)4 μ‐star copolymer (M n,NMR ≈ 12 620; Đ = 1.22). Preliminary examination of the PBA2PCL4 μ‐star copolymer reveals assembled nanofibers having a uniform diameter of ≈20 nm.
A novel type of emulsion gel based on star‐polymer‐stabilized emulsions is highlighted, which contains discrete hydrophobic oil and hydrophilic aqueous solution domains. Well‐defined phenol‐functionalized core‐crosslinked star polymers are synthesized via reversible addition‐fragmentation chain transfer (RAFT)‐mediated dispersion polymerization and are used as stabilizers for oil‐in‐water emulsions. Horseradish‐peroxidase‐catalyzed polymerization of the phenol moieties in the presence of H2O2 enables rapid formation of crosslinked emulsion gels under mild conditions. The crosslinked emulsion gels exhibit enhanced mechanical strength, as well as widely tunable composition.
A new and easy method of stimuli‐triggered growth and removal of a bioreducible nanoshell on nanoparticles is reported. The results show that pH or temperature could induce the aggregation of disulfide‐contained branched polymers at the surface of nanoparticles; subsequently, the aggregated polymers could undergo intermolecular disulfide exchange to cross‐link the aggregated polymers, forming a bioreducible polymer shell around nanoparticles. When these nanoparticles with a polymer shell are treated with glutathione (GSH) or d,l ‐dithiothreitol (DTT), the polymer shell could be easily removed from the nanoparticles. The potential application of this method is demonstrated by easily growing and removing a bioreducible shell from liposomes, and improvement of in vivo gene transfection activity of liposomes with a bioreducible PEG shell.
Swell! Superabsorbent, mechanically robust, high‐porosity hydrogels based on poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) have been successfully synthesized by templating within high internal phase emulsions (HIPEs). These hydrogel polyHIPEs (HG‐PHs) exhibit unusually high uptakes of water and of artificial urine through structure‐ and crosslinking‐dependent hydrogel‐swelling‐driven void expansion. An HG‐PH with 3.1 mmol g−1 of highly accessible sulfonic acid groups exhibits a 7 meq NaOH ion exchange capacity per gram polymer and rapid dye absorption. The highly swollen HG‐PHs do not fail at compressive strains of up to 60%, they retain water and recover their shapes upon the removal of stress. Unusually, the dry hydrogels have relatively high compressive moduli and achieve relatively high stresses at 70% strain.
Three new star‐shaped macromolecules with hexakis(fluoren‐2‐yl)benzene as the core and pyridine as the periphery ( 2Py‐HFB , 3Py‐HFB , and 4Py‐HFB ) are synthesized and characterized. The synthetic conditions of octacarbonyldicobat‐catalyzed cycloaddition reaction for different alkyne precursors are investigated. The coordination interaction between the pyridine ring of alkyne precursor and the cobalt catalyst may result in very low yield of the cyclotrimerization product. However, with the increase of the catalyst loading, the yields of the intermediates of cyclopentadienone are enhanced. Then, the desired cyclotrimerization products can be obtained by the Diels–Alder reactions of cyclopentadienone with acetylene in good yield. These new compounds exhibit good thermal stability and favorable electron affinity. By using the new compounds as electron‐transporting materials, all‐solution‐processed phosphorescent organic light‐emitting devices (OLEDs) show good performance with a maximum current efficiency of 5.6 cd A−1 and maximum external quantum efficiency of 4.68%.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
In this article, taurine, one of the small biomolecules associated with bone metabolism, is firstly utilized to induce the fabrication of nano‐architectured conducting polypyrrole (NCPPy) on biomedical titanium in diverse pH values of phosphate buffer solution (PBS). Accordingly, the possible mechanism for the fabrication of NCPPy is proposed, which is dependent on the states of polytaurine from the polymerization of taurine, i.e., the inability of forming polytaurine and unordered restricted space results in taurine‐incorporated and polytaurine‐incorporated tightly packed nanoparticles (pH 6.2 and 8.0), respectively, and however, ordered restricted space constructed by polytaurine chains induces the fabrication of polytaurine‐incorporated nanopillars (pH 6.8) and polytaurine‐incorporated nanowire networks (pH 7.4).
The chemical control of cell division has attracted much attention in the areas of single cell‐based biology and high‐throughput screening platforms. A mussel‐inspired cytocompatible encapsulation method for achieving a “cell‐division control” with cross‐linked layer‐by‐layer (LbL) shells is developed. Catechol‐grafted polyethyleneimine and hyaluronic acid are chosen as polyelectrolytes for the LbL process, and the cross‐linking of polyelectrolytes is performed at pH 8.5. Cell division is controlled by the number of the LbL nanolayers and cross‐linking reaction. We also suggest a new measuring unit, , for quantifying “cell‐division timing” based on microbial growth kinetics.
This communication reports the first example of precision polyolefin nanoalloys where an exotic immiscible polymer is nanometrically dispersed with stability in a polyolefin matrix in a highly controlled mode. Following the preparation of polypropylene/multiwalled carbon nanotubes nanocomposites (PP/MWCNTs) by in situ Ziegler‐Natta polymerization, the hydroxyl groups on the surfaces of individual MWCNTs are used to initiate ring‐opening polymerization of ε‐caprolactone, resulting in PP/poly(ε‐caprolactone) (PCL) alloy with PCL grafted on MWCNTs. Upon phase formation, the PP/MWCNTs‐g‐PCL alloys exhibit a unique PCL dispersion morphology, which is stable and solely governed by PCL molecular weight.
The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.
The synthesis of symmetric cyclo poly(ε‐caprolactone)–block–poly(l (d )‐lactide) (c(PCL–b–PL(D)LA)) by combining ring‐opening polymerization of ε‐caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self‐assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL‐b‐PDLA and PCL‐b‐PLLA copolymers.
Furfuryl glycidyl ether (FGE) represents a highly versatile monomer for the preparation of reversibly cross‐linkable nanostructured materials via Diels–Alder reactions. Here, the use of FGE for the mid‐chain functionalization of a P2VP‐b‐PEO diblock copolymer is reported. The material features one furan moiety at the block junction, P2VP68‐FGE‐b‐PEO390, which can be subsequently addressed in Diels–Alder reactions using maleimide‐functionalized counterparts. The presence of the FGE moiety enables the introduction of dyes as model labels or the formation of hetero‐grafted brushes as shell on hybrid Au@Polymer nanoparticles. This renders P2VP68‐FGE‐b‐PEO390, a powerful tool for selective functionalization reactions, including the modification of surfaces.
The present review focuses on the recent progress made in thin film orientation of semi‐conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3‐alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi‐conducting polymers can generate a large palette of semi‐crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions.
In order to improve the stability of polymeric vesicles, supramolecular vesicles are developed via self‐assembly of the inclusion of γ‐cyclodextrin (γ‐CD) and 1‐pyrenemethyl palmitate (Py‐pal). The inclusion has one hydrophilic head and double hydrophobic tails, which looks like the phospholipid. From the transmission electron microscopy (TEM) image, it can be observed that the average diameter of supramolecular vesicles is approximately 55 nm and there is a huge cavity in supramolecular vesicles. Due to the photo‐breakable ester of Py‐pal, supramolecular vesicles are broken under UV irradiation. Supramolecular vesicles are used as UV‐responsive drug carriers to release the hydrophilic drug such as doxorubicin hydrochloride (DOX•HCl).
