Different techniques are being developed for fabricating microcapsules; it is still a challenge to fabricate them in an efficient and environment‐friendly process. Here, a one‐step green route to synthesize silk protein sericin‐based microcapsules without any assistance of organic solvents is reported. By carefully changing the concentration of calcium ions accompanied with stirring, the morphology of the microcapsules can easily be regulated to form either discoidal, biconcave, cocoon‐like, or tubular structures. The chelation of Ca2+ and shearing force from agitation may induce the conformational transformation of sericin, which possibly results in the formation of microcapsules through the self‐assembly of the protein subsequently. The as‐prepared cocoon‐like microcapsules exhibit pH‐dependent stability. A potential application of microcapsules being fabricated from natural water‐soluble silk protein sericin for controlled bioactive molecules loading and release system by a pH‐triggered manner is quite feasible.
A novel oral delivery system consisting of thermoresponsive zwitterionic poly(sulfobetaine methacrylate) (PSBMA) and pH‐responsive poly(2‐(diisopropylamino)ethyl methacrylate) (PDPA) is synthesized via free radical polymerization. This copolymer can self‐aggregate into nanoparticles via electrostatic attraction between ammonium cation and sulfo‐anion of PSBMA and successfully encapsulate anticancer drug, curcumin (CUR), with highest loading content of 2.6% in the P(SBMA‐co‐DPA) nanoparticles. The stimuli‐responsive phase transition behaviors of P(SBMA‐co‐DPA) copolymers at different pH buffer solution show pH‐dependent upper critical solution temperature (UCST) attributed to the influence of protonation/deprotonation of the pH‐responsive DPA segments. Through the delicate adjustment of the PSBMA/PDPA molar ratios, the stimuli‐responsive phase transition could be suitable for physiological environment. The kinetic drug release profiles demonstrate that P(SBMA‐co‐DPA) nanoparticles have the potential as oral delivery carriers due to their effective release of entrapped drugs in the stimulated intestinal fluid and preventing the deterioration of drug in stimulated gastric fluid.
Polydopamine‐based coatings are fabricated via an electric field‐accelerating and ‐directing codeposition process of polydopamine with charged polymers such as polycations, polyanions, and polyzwitterions. The coatings are uniform and smooth on various substrates, especially on those adhesion‐resistant materials including poly(vinylidene fluoride) and poly(tetrafluoroethylene) membranes. Moreover, this electric field‐directed deposition method can be applied to facilely prepare Janus membranes with asymmetric chemistry and wettability.
Monodisperse poly(methacrylic acid/ethyleneglycoldimethacrylate) (MAA/EGDMA) hollow microcapsules, which exhibit pH‐responsive behavior, are prepared by diffusion of cationic surfactants and hydrophobic interaction. During the association of the negatively charged hydrogel microspheres and an oppositely charged surfactant (cetyltrimethylammonium bromide, CTA(+)B), the hydrophobic polymer‐surfactant complexes that form are separated from the internal water; consequently, a hollow structure can be formed. Confocal laser scanning microscopy, UV spectroscopy and zeta potential are employed to study the formation of the hollow structure during the diffusion of the cationic surfactant. The controlled release behavior of methylene blue as a model drug from the as‐prepared poly(MAA/EGDMA) microcapsules with a hollow structure is investigated under different pH conditions. The hollow structure can be retained, even during repetitive pH changes.
To overcome drug delivery issues associated with its short half‐life in vivo, p‐coumaric acid (pCA), a naturally occurring bioactive, has been chemically incorporated into a poly(anhydride‐ester) backbone through solution polymerization. Nuclear magnetic resonance and Fourier transform infrared spectroscopies indicated that pCA was successfully incorporated without noticeable alterations in structural integrity. The polymer's weight‐average molecular weight and thermal properties were determined, exhibiting a molecular weight of over 26 000 Da and a glass transition temperature of 57 °C. In addition, in vitro hydrolytic release studies demonstrated pCA release over 30 d with maintained antioxidant activity, demonstrating the polymer's potential as a controlled release system.
This work deals with the in‐depth investigation of thiol‐yne based network formation and its effect on thermomechanical properties and impact strength. The results show that the bifunctional alkyne monomer di(but‐1‐yne‐4‐yl)carbonate ( DBC ) provides significantly lower cytotoxicity than the comparable acrylate, 1,4‐butanediol diacrylate ( BDA ). Real‐time near infrared photorheology measurements reveal that gel formation is shifted to higher conversions for DBC /thiol resins leading to lower shrinkage stress and higher overall monomer conversion than BDA . Glass transition temperature (Tg), shrinkage stress, as well as network density determined by double quantum solid state NMR, increase proportionally with the thiol functionality. Most importantly, highly cross‐linked DBC /dipentaerythritol hexa(3‐mercaptopropionate) networks (Tg ≈ 61 °C) provide a 5.3 times higher impact strength than BDA , which is explained by the unique network homogeneity of thiol‐yne photopolymers.
Diarylbutadiyne derivatives are ideal monomers for providing the π‐electron‐conjugated system of polydiacetylenes (PDAs). The geometrical parameters for diacetylene topochemical polymerization are known. However, control of the molecules under these parameters is yet to be addressed. This work shows that by simply tailoring diarylbutadiyne with amide side‐chain substituents, the arrangement of the substituents and the resulting hydrogen bond framework allows formation of π‐electron‐conjugated PDA.
Here, a novel multi‐stimuli‐responsive fluorescence probe is developed by incorporating spiropyran group into the coumarin‐substituted polydiacetylene (PDA) vesicles. The fluorescence of PDA can be turned on upon heating, and can be quenched upon exposure to UV light irradiation or pH stimuli owing to the fluorescene resonance energy transfer (FRET) between the red‐phase PDA and the open merocyanine (MC) form of spiropyran. Moreover, we have designed and experimentally realized a set of logic gate operations for the first time based on the fluorescence modulation of the designed system upon thermal, photo, and pH stimuli. This novel type of resettable logic gates augur well for practical applications in information storage, optical recording, and sensing in complicated microenvironments.
A simple process is developed to fabricate metallo‐supramolecular nanogels (MSNs) by the metallo‐supramolecular‐coordinated interaction between histidine and iron‐meso‐tetraphenylporphin. MSNs are composed of histidine‐modified dextran (DH) and iron‐meso‐tetraphenylporphin (Fe–Por) and exhibit excellent biocompatibility and stability. MSNs show pH responsiveness in the intracellular mildly acidic environment, which has great potential for acid‐triggered drug release delivery. In vitro drug release profiles demonstrate that the pH‐dependent disassembly of MSNs to histidine and Por results in a quicker release rate of loaded‐DOX at pH 5.3, while at pH 7.4 MSNs could hinder the release of loaded‐DOX due to the enhanced stability of MSNs.
Dopamine‐containing monomers, N‐3,4‐dihydroxybenzenethyl methacrylamide (DMA) and dimethylaminoethyl methacrylate (DMAEMA), are successfully copolymerized in a well‐controlled manner via ambient temperature single‐electron transfer initiation and propagation through the radical addition fragmentation chain transfer (SET‐RAFT) method. The controlled behaviors of the copolymerization are confirmed by the first‐order kinetic plots, the linear relationships between molecular weights, and the monomer conversions while keeping relatively narrow molecular weight distribution (Mw/Mn ≤ 1.45). Moreover, biomimetic self‐assembly of poly(N‐3,4‐dihydroxybenzenethyl methacrylamide‐co‐dimethylaminoethyl methacrylate) PDMA‐co‐PDMAEMA and inorganic particles are employed to prepare tunable honeycomb‐like porous hybrid particles (HPHPs) by regulating the predesigned chemical composition. In addition, the inorganic sacrificial templates are successfully selective etched for the formation of porous organic materials.
A free‐standing polymer brush film with tailored thicknesses based on a colorless polydopamine (PDA) thin layer is prepared and characterized. The surface‐initiated atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) is performed on a PDA layer with thickness of ca. 6 nm, which generated an optically transparent and colorless free‐standing PHEMA brush film (1.5 cm × 1.5 cm). Because the cross‐linked PDA layer is used as the base for the polymer brushes, the reported method does not require cross‐linking the polymer brushes. The free‐standing film thicknesses of ≈16–75 nm are controlled by simply changing the ATRP reaction time. The results show that the free‐standing PHEMA brush film transferred onto a plate exhibits a relatively smooth surface and is stable in any solvent.
Lignin‐grafted copolymers, namely lignin‐graft‐poly(methyl methacrylate‐co‐butyl acrylate) (lignin‐g‐P(MMA‐co‐BA)), are synthesized via “grafting from” atom transfer radical polymerization (ATRP) with the aid of lignin‐based macroinitiators. By manipulating the monomer feed ratios of MMA/BA, grafted copolymers with tunable glass transition temperatures (−10–40 °C) are obtained. These copolymers are evaluated as sustainable thermoplastic elastomers (TPEs). The results suggest that the mechanical properties of these TPEs lignin‐g‐P(MMA‐co‐BA) copolymers are improved significantly by comparing with those of linear P(MMA‐co‐BA) copolymer counterparts, and the elastic strain recovery is nearly 70%. Lignin‐g‐P(MMA‐co‐BA) copolymers exhibit high absorption in the range of the UV spectrum, which might allow for applications in UV‐blocking coatings.
A pH‐responsive core cross‐linked star (CCS) polymer containing poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) arms was used as an interfacial stabilizer for emulsions containing toluene (80 v%) and water (20 v%). In the pH range of 12.1‐9.3, ordinary water‐in‐oil emulsions were formed. Intermediate multiple emulsions of oil‐in‐water‐in‐oil and water‐in‐oil‐in‐water were formed at pH 8.6 and 7.5, respectively. Further lowering the pH resulted in the formation of gelled high internal phase emulsions of oil‐in‐water type in the pH range of 6.4‐0.6. The emulsion behavior was correlated with interfacial tension, conductivity and configuration of the CCS polymer at different pH.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
High‐porosity interconnected, thermoresponsive macroporous hydrogels are prepared from oil‐in‐water high internal phase emulsions (HIPEs) stabilized by gelatin‐graft‐poly(N‐isopropylacrylamide). PolyHIPEs are obtained by gelling HIPEs utilizing the thermoresponsiveness of the copolymer components. PolyHIPEs properties can be controlled by varying the aqueous phase composition, internal phase volume ratio, and gelation temperature. PolyHIPEs respond to temperature changes experienced during cell seeding, allowing fibroblasts to spread, proliferate, and penetrate into the scaffold. Encapsulated cells survive ejection of cell‐laden hydrogels through a hypodermic needle. This system provides a new strategy for the fabrication of safe injectable biocompatible tissue engineering scaffolds.
The attempts to mediate iterative RAFT polymerization of ionic monomers through visible light irradiation in water at 20 °C is reported, in which complete conversions are attained in several tens of minutes and the propagation suspends/restarts immediately for multiple times on cycling irradiation. This technique suits the one‐pot synthesis of NH2/imidazole‐based polymers with tuned structures from homo to random, block, random‐block, and block‐random‐block, thus is robust and promising to control the sequence of the ionized water‐soluble reactive copolymers.
This communication describes the first application of cycloaddition between an in situ generated nitrile oxide with norbornene leading to a polymer crosslinking reaction for the preparation of poly(ethylene glycol) hydrogels under physiological conditions. Hydrogels with high water content and robust physical strength are readily formed within 2–5 min by a simple two‐solution mixing method which allows 3D encapsulation of neuronal cells. This bioorthogonal crosslinking reaction provides a simple yet highly effective method for preparation of hydrogels to be used in bioengineering.
Copolymers of N‐isopropylacrylamide (NIPAM) and dopamine methacrylate can establish a reversible, self‐healing 3D network in aprotic solvents based on hydrogen bonding. The reactivity and hydrogen bonding formation of catechol groups in copolymer chains are studied by UV–vis and 1H NMR spectroscopy, while reversibility from sol to gel and inverse as well as self‐healing properties are tested rheologically. The produced reversible organogel can self‐encapsulate physically interacting or chemically bonded solutes such as drugs due to thermosensitivity of the used copolymer. This system offers dual‐targeted and controlled drug delivery and release—by slowing down release kinetics by supramolecular bonding of the drug and by reducing diffusion rates due to modulus increase.
An extrinsic self‐healing coating system containing tetraphenylethylene (TPE) in microcapsules was monitored by measuring aggregation‐induced emission (AIE). The core healing agent comprised of methacryloxypropyl‐terminated polydimethylsiloxane, styrene, benzoin isobutyl ether, and TPE was encapsulated in a urea‐formaldehyde shell. The photoluminescence of the healing agent in the microcapsules was measured that the blue emission intensity dramatically increased and the storage modulus also increased up to 105 Pa after the photocuring. These results suggested that this formulation might be useful as a self‐healing material and as an indicator of the self‐healing process due to the dramatic change in fluorescence during photocuring. To examine the ability of the healing agent to repair damage to a coating, a self‐healing coating containing embedded microcapsules was scribed with a razor. As the healing process proceeded, blue light fluorescence emission was observed at the scribed regions. This observation suggested that self‐healing could be monitored using the AIE fluorescence.
The polymerization of ocimene has been first achieved by half‐sandwich rare‐earth metal dialkyl complexes in combination with activator and AliBu3. The regio‐ and stereoselectivity in the ocimene polymerization can be controlled by tuning the cyclopentadienyl ligand and the central metal of the complex. The chiral cyclopentadienyl‐ligated Sc complex 1 prepares syndiotactic cis‐1,4‐polyocimene (cis‐1,4‐selectivity up to 100%, rrrr = 100%), while the corresponding Lu, Y, and Dy complexes 2 – 4 and the achiral pentamethylcyclopentadienyl Sc, Lu, and Y complexes 5 – 7 afford isotactic trans‐1,2‐polyocimenes (trans‐1,2‐selectivity up to 100%, mm = 100%).
