Raman spectroscopic study of the magnesium‐carbonate minerals—artinite and dypingite

Magnesium minerals are important in the understanding of the concept of geosequestration. The two hydrated hydroxy magnesium‐carbonate minerals artinite and dypingite were studied by Raman spectroscopy. Intense bands are observed at 1092 cm⁻¹ for artinite and at 1120 cm⁻¹ for dypingite, attributed ν₁ symmetric stretching mode of CO₃²⁻. The ν₃ antisymmetric stretching vibrations of CO₃²⁻ are extremely weak and are observed at 1412 and 1465 cm⁻¹ for artinite and at 1366, 1447 and 1524 cm⁻¹ for dypingite. Very weak Raman bands at 790 cm⁻¹ for artinite and 800 cm⁻¹ for dypingite are assigned to the CO₃²⁻ν₂ out‐of‐plane bend. The Raman band at 700 cm⁻¹ of artinite and at 725 and 760 cm⁻¹ of dypingite are ascribed to CO₃²⁻ν₂ in‐plane bending mode. The Raman spectrum of artinite in the OH stretching region is characterised by two sets of bands: (1) an intense band at 3593 cm⁻¹ assigned to the MgOH stretching vibrations and (2) the broad profile of overlapping bands at 3030 and 3229 cm⁻¹ attributed to water stretching vibrations. X‐ray diffraction studies show that the minerals are disordered. This is reflected in the difficulty of obtaining Raman spectra of reasonable quality, and explains why the Raman spectra of these minerals have not been previously or sufficiently described. Copyright © 2008 John Wiley & Sons, Ltd.     

Observation of low‐wavenumber out‐of‐plane optical phonon in few‐layer graphene

Few‐layer graphene grown by chemical vapor deposition has been studied by Raman and ultrafast laser spectroscopy. A low‐wavenumber Raman peak of ~120 cm⁻¹ and a phonon‐induced oscillation in the kinetic curve of electron–phonon relaxation process have been observed, respectively. The Raman peak is assigned to the low‐wavenumber out‐of‐plane optical mode in the few‐layer graphene. The phonon band shows an asymmetric shape, a consequence of so‐called Breit‐Wigner‐Fano resonance, resulting from the coupling between the low‐wavenumber phonon and electron transitions. The obtained oscillation wavenumber from the kinetic curve is consistent with the detected low‐wavenumber phonon by Raman scattering. The origin of this oscillation is attributed to the generation of coherent phonons and their interactions with photoinduced electrons. Copyright © 2012 John Wiley & Sons, Ltd.     

Food additives characterization by infrared,Raman, and surface‐enhanced Raman spectroscopies

Fourier‐transform infrared (FT‐IR), Raman (RS), and surface‐enhanced Raman scattering (SERS) spectra of β‐hydroxy‐β‐methylobutanoic acid (HMB), L ‐carnitine, and N‐methylglycocyamine (creatine) have been measured. The SERS spectra have been taken from species adsorbed on a colloidal silver surface. The respective FT‐IR and RS band assignments (solid‐state samples) based on the literature data have been proposed. The strongest absorptions in the FT‐IR spectrum of creatine are observed at 1398, 1615, and 1699 cm⁻¹, which are due to ν_s(COOH) + ν(CN) + δ(CN), ρ_s(NH₂), and ν(C O) modes, respectively, whereas those of L ‐carnitine (at 1396/1586 cm⁻¹ and 1480 cm⁻¹) and HMB (at 1405/1555/1585 cm⁻¹ and 1437–1473 cm⁻¹) are associated with carboxyl and methyl/methylene group vibrations, respectively. On the other hand, the strongest bands in the RS spectrum of HMB observed at 748/1442/1462 cm⁻¹ and 1408 cm⁻¹ are due to methyl/methylene deformations and carboxyl group vibrations, respectively. The strongest Raman band of creatine at 831 cm⁻¹ (ρ_w(R NH₂)) is accompanied by two weaker bands at 1054 and 1397 cm⁻¹ due to ν(CN) + ν(R NH₂) and ν_s(COOH) + ν(CN) + δ(CN) modes, respectively. In the case of L ‐carnitine, its RS spectrum is dominated by bands at 772 and 1461 cm⁻¹ assigned to ρ_r(CH₂) and δ(CH₃), respectively. The analysis of the SERS spectra shows that HMB interacts with the silver surface mainly through the  COO⁻, hydroxyl, and  CH₂ groups, whereas L ‐carnitine binds to the surface via  COO⁻ and  N⁺(CH₃)₃ which is rarely enhanced at pH = 8.3. On the other hand, it seems that creatine binds weakly to the silver surface mainly by  NH₂, and C O from the  COO⁻ group. Copyright © 2006 John Wiley & Sons, Ltd.     

IR/Raman spectroscopy and DFT calculations of cyclic di‐amino acid peptides. Part III: comparison of solid state and solution structures of cyclo(L‐Ser‐L‐Ser)

B3‐LYP/cc‐pVDZ calculations of the gas‐phase structure and vibrational spectra of the isolated molecule cyclo(L ‐Ser‐L ‐Ser), a cyclic di‐amino acid peptide (CDAP), were carried out by assuming C₂ symmetry. It is predicted that the minimum‐energy structure is a boat conformation for the diketopiperazine (DKP) ring with both L ‐seryl side chains being folded slightly above the ring. An additional structure of higher energy (15.16 kJ mol⁻¹) has been calculated for a DKP ring with a planar geometry, although in this case two fundamental vibrations have been calculated with imaginary wavenumbers. The reported X‐ray crystallographic structure of cyclo(L ‐Ser‐L ‐Ser), shows that the DKP ring displays a near‐planar conformation, with both the two L ‐seryl side chains being folded above the ring. It is hypothesized that the crystal packing forces constrain the DKP ring in a planar conformation and it is probable that the lower energy boat conformation may prevail in the aqueous environment. Raman scattering and Fourier‐transform infrared (FT‐IR) spectra of solid state and aqueous solution samples of cyclo(L ‐Ser‐L ‐Ser) are reported and discussed. Vibrational band assignments have been made on the basis of comparisons with the calculated vibrational spectra and band wavenumber shifts upon deuteration of labile protons. The experimental Raman and IR results for solid‐state samples show characteristic amide I vibrations which are split (Raman: 1661 and 1687 cm⁻¹, IR: 1666 and 1680 cm⁻¹), possibly due to interactions between molecules in a crystallographic unit cell. The cis amide I band is differentiated by its deuterium shift of ∼30 cm⁻¹, which is larger than that previously reported for trans amide I deuterium shifts. A cis amide II mode has been assigned to a Raman band located at 1520 cm⁻¹. The occurrence of this cis amide II mode at a wavenumber above 1500 cm⁻¹ concurs with results of previously examined CDAP molecules with low molecular weight substituents on the C^α atoms, and is also indicative of a relatively unstrained DKP ring. Copyright © 2009 John Wiley & Sons, Ltd.     

OctTES/TEOS system for hybrid coatings: real‐time monitoring of the hydrolysis and condensation by Raman spectroscopy

The hybrid organic–inorganic system Tetra‐ethyl‐ortho‐silicate functionalized with Octyl‐triethoxy‐silane, studied as protective coating for the preservation of historical glasses from the environmental weathering agents, has been characterized by Raman spectroscopy by monitoring the sol‐gel reactions over time through characteristic features in the spectrum. In particular, for the hydrolysis reaction the disappearance of the 653 cm⁻¹ (Si‐O symmetric breathing) and 810 cm⁻¹ (CH₂ rocking in Si‐alkoxides) peaks and the growth of the 710 cm⁻¹ band, because of hydrolyzed alkyl‐silane, and of the 881 cm⁻¹ peak (ethanol C–C symmetric stretching) have been checked. Moreover, the condensation reaction can be tracked by the disappearance of the two main peaks of the alcohols at 816 and 881 cm⁻¹, going along with the growth of the broad band between 250 and 500 cm⁻¹ (Si–O–Si symmetric bending) and of the feature at 840 cm⁻¹ (Si–O–Si stretching). At the end of the condensation process the Raman spectrum still displays spectral bands unique to the alkyl chain in Octyl‐triethoxy‐silane, in the 1330–1450 cm⁻¹ and 2725–3000 cm⁻¹ ranges. Copyright © 2016 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies of the structure of di‐amino acid peptides. Part II: cyclo(L‐Asp‐L‐Asp) in the solid state and in aqueous solution

Solid‐state protonated and N,O‐deuterated Fourier transform infrared (IR) and Raman scattering spectra together with the protonated and deuterated Raman spectra in aqueous solution of the cyclic di‐amino acid peptide cyclo(L ‐Asp‐L ‐Asp) are reported. Vibrational band assignments have been made on the basis of comparisons with previously cited literature values for diketopiperazine (DKP) derivatives and normal coordinate analyses for both the protonated and deuterated species based upon DFT calculations at the B3‐LYP/cc‐pVDZ level of the isolated molecule in the gas phase. The calculated minimum energy structure for cyclo(L ‐Asp‐L ‐Asp), assuming C₂ symmetry, predicts a boat conformation for the DKP ring with both the two L ‐aspartyl side chains being folded slightly above the ring. The CO stretching vibrations have been assigned for the side‐chain carboxylic acid group (e.g. at 1693 and 1670 cm⁻¹ in the Raman spectrum) and the cis amide I bands (e.g. at 1660 cm⁻¹ in the Raman spectrum). The presence of two bands for the carboxylic acid CO stretching modes in the solid‐state Raman spectrum can be accounted for by factor group splitting of the two nonequivalent molecules in a crystallographic unit cell. The cis amide II band is observed at 1489 cm⁻¹ in the solid‐state Raman spectrum, which is in agreement with results for cyclic di‐amino acid peptide molecules examined previously in the solid state, where the DKP ring adopts a boat conformation. Additionally, it also appears that as the molecular mass of the substituent on the C^α atom is increased, the amide II band wavenumber decreases to below 1500 cm⁻¹; this may be a consequence of increased strain on the DKP ring. The cis amide II Raman band is characterized by its relatively small deuterium shift (29 cm⁻¹), which indicates that this band has a smaller N H bending contribution than the trans amide II vibrational band observed for linear peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman and mid‐IR spectroscopic study of the magnesium carbonate minerals—brugnatellite and coalingite

Two hydrated hydroxy magnesium carbonate minerals brugnatellite and coalingite with a hydrotalcite‐like structure were studied by Raman spectroscopy. Intense bands are observed at 1094 cm⁻¹ for brugnatellite and at 1093 cm⁻¹ for coalingite attributed to the CO₃²⁻ν₁ symmetric stretching mode. Additional low intensity bands are observed at 1064 cm⁻¹. The existence of two symmetric stretching modes is accounted for in terms of different anion structural arrangements. Very low intensity bands at 1377 and 1451 cm⁻¹ are observed for brugnatellite, and the Raman spectrum of coalingite displays two bands at 1420 and 1465 cm⁻¹ attributed to the (CO₃)²⁻ν₃ antisymmetric stretching modes. Very low intensity bands at 792 cm⁻¹ for brugnatellite and 797 cm⁻¹ for coalingite are assigned to the CO₃²⁻ out‐of‐plane bend (ν₂). X‐ray diffraction studies by other researchers have shown that these minerals are disordered. This is reflected in the difficulty of obtaining Raman spectra of reasonable quality and explains why the Raman spectra of these minerals have not been previously or sufficiently described. A comparison is made with the Raman spectra of other hydrated magnesium carbonate minerals. Copyright © 2008 John Wiley & Sons, Ltd.     

Micro‐Raman analysis and finite‐element modeling of 3 C‐SiC microstructures

Micro‐ and nano‐electromechanical systems (MEMS and NEMS) fabricated in 3 C‐SiC are receiving particular attention thanks to the material physical properties: its wide band gap (2.3 eV), its ability to operate at high temperatures, its mechanical strength and its inertness to the exposure in corrosive environments. However, high residual stress (which is normally generated during the hetero‐epitaxial growth process) makes the use of 3 C‐SiC in Si‐based MEMS fabrication techniques very limited leading to a failure of micro‐machined/sensor structures. In this paper, micro‐Raman characterizations and finite‐element modeling (FEM) of microstructures realized on poly and single‐crystal (100) 3 C‐SiC/Si films are performed. Transverse optical (TO) Raman mode analysis reveals the stress relaxation on the free standing structure (796.5 cm⁻¹) respect to the stressed unreleased region (795.7 cm⁻¹). Also, microstructures as cantilever, bridge and planar rotating probe show an intense stress field located around the undercut region. Here, the TO Raman mode undergoes an intense shift, up to 2 cm⁻¹, ascribed to the modification of the Raman stress tensor. Indeed, the generalized axial regime, described by diagonal components of the Raman stress tensor, cannot be applied in this region. Raman maps analysis and FEM simulations show the ‘activation’ of the shear stress, i.e. non‐diagonal components of the stress tensor. The stress‐Raman modes shift correlation, in the case of fully non‐diagonal stress tensors, has been investigated. The aim of future works will be to minimize the stress field generation and the defects density within the epitaxial layer. Copyright © 2012 John Wiley & Sons, Ltd.     

Density functional theory calculation and vibrational spectral analysis of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one

The Fourier transform infrared (4000–400 cm⁻¹) and Fourier transform Raman (3500–500 cm⁻¹) spectra of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one (Warfarin) have been measured and calculated. The structure optimization has been made using density functional theory (DFT) calculations. Complete vibrational assignments of the observed spectra have been compared with theoretical wavenumbers. The wavenumber increasing in the methyl group shows the electronic hyperconjugation effect. The natural bond orbital (NBO) analysis reveals the hyperconjugation interaction and the intramolecular hydrogen bonding. The first‐order hyperpolarizability has been calculated. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular structure,vibrational spectroscopic,first‐order hyperpolarizability and HOMO,LUMO studies of 3‐hydroxy‐2‐naphthoic acid hydrazide

The Fourier‐transform infrared spectrum of 3‐hydroxy‐2‐naphthoic acid hydrazide (3H2NAH) was recorded in the region 4000–400 cm⁻¹. The Fourier‐transform Raman spectrum of 3H2NAH was also recorded in the region 3500–10 cm⁻¹. Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of 3H2NAH were carried out by density functional theory (DFT/B3LYP) method with 6‐31G(d,p) as basis set. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. The values of the electric dipole moment (µ) and the first‐order hyperpolarizability (β) of the investigated molecule were computed using ab initio quantum mechanical calculations. The UV spectrum was measured in ethanol solution. The calculation results also show that the 3H2NAH molecule might have microscopic nonlinear optical (NLO) behavior with non‐zero values. A detailed interpretation of the infrared and Raman spectra of 3H2NAH is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT‐IR and FT‐Raman spectra for the title molecule have also been constructed. Copyright © 2009 John Wiley & Sons, Ltd.     

Irradiated rare‐earth‐doped powellite single crystal probed by confocal Raman mapping and transmission electron microscopy

The irradiation‐induced damages and structure modifications of rare earths doped powellite single crystal have been precisely studied using optical and electron microscopy techniques, including optical interferometry, confocal micro‐Raman spectroscopy and transmission electron microscopy. The surface of powellite crystal pops out anisotropically after exposing under Ar ion beam, with a saturation swelling value of 2.0% along a‐axis and 1.3% along the c‐axis of powellite at high dose. Raman mapping on focused ion‐beam sections (5 × 3 µm²) perpendicular to the irradiated surface reveals that irradiation damage induces orientation‐dependent compressive stresses in powellite. However, no significant anisotropic effect has been found on the irradiation‐induced structural disorder in powellite. At low dose (0.012 dpa), the main irradiation‐induced defects created in powellite crystal are small defect clusters. By comparison, the dominant kinds of defects in high‐dose (5.0 dpa) sample are dislocations loops and networks. Copyright © 2014 John Wiley & Sons, Ltd.     

A non‐destructive approach for doping profiles characterization by micro‐Raman spectroscopy: the case of B‐implanted Ge

B‐implanted Ge samples have been investigated by micro‐Raman spectroscopy under different excitation wavelengths, with the aim of gaining insights about the B distribution at different depths beneath the sample surface. The intensities, observed under the different excitation wavelengths, of the B–Ge Raman peak at about 545 cm⁻¹, which is due to the local vibrational mode of the substitutional B atoms in the Ge matrix, have been used to calibrate the optical absorption lengths in B‐implanted Ge. Then, by using these calibrated values, a very sharp correlation between the spectral features of the Ge–Ge Raman peak at ~300 cm⁻¹ and the content of substitutional B atoms has been derived. Accordingly, a non‐destructive approach, based on micro‐Raman spectroscopy under different excitation wavelengths, is presented to estimate, at least at the lowest depths, the carrier concentration profiles from the spectral features of the Ge–Ge Raman peak. Copyright © 2014 John Wiley & Sons, Ltd.     

Measurement of the absolute Raman scattering cross section of the 1584‐cm−1 band of benzenethiol and the surface‐enhanced Raman scattering cross section enhancement factor for femtosecond laser‐nanostructured substrates

The absolute Raman scattering cross section (σ_RS) for the 1584‐cm⁻¹ band of benzenethiol at 897 nm (1.383 eV) has been measured to be 8.9 ± 1.8 × 10⁻³⁰ cm² using a 785‐nm pump laser. A temperature‐controlled, small‐cavity blackbody source was used to calibrate the signal output of the Raman spectrometer. We also measured the absolute surface‐enhanced Raman scattering cross section (σ_SERS) of benzenethiol adsorbed onto a silver‐coated, femtosecond laser‐nanostructured substrate. Using the measured values of 8.9 ± 1.8 × 10⁻³⁰ and 6.6 ± 1.3 × 10⁻²⁴ cm² for σ_RS and σ_SERS respectively, we calculate an average cross‐section enhancement factor (EF) of 0.8 ± 0.3 × 10⁶. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydrogen‐arsenate mineral pharmacolite Ca(AsO3OH)·2H2O—implications for aquifer and sediment remediation

The removal of arsenate anions from aqueous media, sediments and wasted soils is of environmental significance. The reaction of gypsum with the arsenate anion results in pharmacolite mineral formation, together with related minerals. Raman and infrared (IR) spectroscopy have been used to study the mineral pharmacolite Ca(AsO₃OH)· 2H₂O. The mineral is characterised by an intense Raman band at 865 cm⁻¹ assigned to the ν₁ (AsO₃)²⁻ symmetric stretching mode. The equivalent IR band is found at 864 cm⁻¹. The low‐intensity Raman bands in the range from 844 to 886 cm⁻¹ provide evidence for ν₃ (AsO₃) antisymmetric stretching vibrations. A series of overlapping bands in the 300‐450 cm⁻¹ region are attributed to ν₂ and ν₄ (AsO₃) bending modes. Prominent Raman bands at around 3187 cm⁻¹ are assigned to the OH stretching vibrations of hydrogen‐bonded water molecules and the two sharp bands at 3425 and 3526 cm⁻¹ to the OH stretching vibrations of only weakly hydrogen‐bonded hydroxyls in (AsO₃OH)²⁻ units. Copyright © 2009 John Wiley & Sons, Ltd.     

Identification of berberine in ancient and historical textiles by surface‐enhanced Raman scattering

The highly fluorescent natural dye berberine can be easily identified in microscopic textile samples by surface‐enhanced Raman spectroscopy employing citrate‐reduced Ag colloid. The ordinary Raman (OR) and SERS spectra of berberine are presented and discussed in the light of a DFT calculation. Using FT‐Raman and FT‐SERS we could reliably compare relative intensity shifts and investigate the adsorption geometry of berberine on Ag nanoparticles. The significant enhancement in the FT‐SERS spectrum of the out‐of‐plane ring system bending deformation mode at 729 cm⁻¹ relative to a group of in‐plane vibrations at around 1500 cm⁻¹ was interpreted as evidence of a ‘flat‐on’ adsorption geometry. SERS was successfully used to identify berberine in silk fiber samples coated with colloidal Ag following a pretreatment with HCl vapor. The SERS method allowed us to detect berberine in a microscopic sample of a single silk fiber from a severely degraded and soiled 17th Century Chinese textile fragment. Copyright © 2007 John Wiley & Sons, Ltd.     

Density functional theory study and vibrational analysis of FT‐IR and FT‐Raman spectra of N‐hydroxyphthalimide

The Fourier transform infrared (FT‐IR) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–400 cm⁻¹, and the Fourier transform Raman (FT‐Raman) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–50 cm⁻¹. With the hope of providing more and effective information on the fundamental vibrations, the Density Functional Theory (DFT)‐Becke3‐Lee‐Yang‐Parr (B3LYP) level with 6‐31G* basis set has been employed in quantum chemical analysis, and normal coordinate analysis has been performed on N‐hydroxyphthalimide by assuming C_s symmetry. The computational wavenumbers are in good agreement with the observed results. The theoretical spectra obtained along with intensity data agree well with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

FT‐Raman spectroscopic spectra on 3‐phenylpropylamine inclusion compounds

Some new Hofmann‐3‐phenylpropylamine‐type clathrates with chemical formulae of M(3‐phenylpropylamine)₂ Ni(CN)₄. 2G (MNi or Co, G = 1,2‐dichlorobenzene or 1,3‐dichlorobenzene) have been prepared and their Fourier transform infrared(FT‐IR; 4000–400 cm⁻¹), far‐infrared (600–100 cm⁻¹) and FT‐Raman (4000–60 cm⁻¹) spectra are reported. The ligand molecule, guest molecules, polymeric sheet and metal‐ligand bands of the clathrates are assigned in detail. The compounds are also characterized by thermal gravimetric analysis (TGA), differential thermal analysis (DTA), elemental analysis and magnetic susceptibility measurements. From the results, the monodentate 3‐phenylpropylamine ligand molecule bonds to the metal atom of |M‐Ni(CN)₄ | _∞ polymeric layers in the trans‐gauche‐gauche (TGG) form, and 1,2‐dichlorobenzene or 1,3‐dichlorobenzene molecules are guested by this structure revealing the inclusion ability of the host complexes. Copyright © 2010 John Wiley & Sons, Ltd.     

Probing charge carrier compensation in high energy ion irradiated III–V semiconductor by Raman spectroscopy and Hall measurements

Raman spectroscopy and Hall measurements have been carried out to investigate the differences in near‐surface charge carrier modulation in high energy (~100 MeV) silicon ion (Si⁸⁺) and oxygen ion (O⁷⁺) irradiated n‐GaAs. In the case of O ion irradiation, the observed decrease in carrier concentration with increase in ion fluence could be explained in the view of charge compensation by possible point defect trap centers, which can form because of elastic collisions of high energy ions with the target nuclei. In Si irradiated n‐GaAs one would expect the carrier compensation to occur at a fluence of 2.5 × 10¹³ ions/cm², if the same mechanism of acceptor state formation, as in case of O irradiation, is considered. However, we observe the charge compensation in this system at a fluence of 5 × 10¹² ions/cm². We discuss the role of the complex defect states, which are formed because of the interaction of the primary point defects, in determining carrier concentration in a Si irradiated n‐GaAs wafer. The above results are combined with the reported data from the literature for high energy silver ion irradiated n‐GaAs, in order to illustrate the effect of both electronic and nuclear energy loss on trap creation and charge compensation. Copyright © 2016 John Wiley & Sons, Ltd.     

Measurement of the absolute Raman scattering cross sections of sulfur and the standoff Raman detection of a 6‐mm‐thick sulfur specimen at 1500 m

The absolute Raman scattering cross sections (σ_RS) for the 471, 217, and 153 cm⁻¹ modes of sulfur were measured as 6.0 ± 1.2 × 10⁻²⁷, 7.7 ± 1.6 × 10⁻²⁷, and 1.2 ± 0.24 × 10⁻²⁶ cm² at 815, 799, and 794 nm, respectively, using a 785‐nm pump laser. The corresponding values of σ_RS at 1120, 1089, and 1081 nm were determined to be 1.5 ± 0.3 × 10⁻²⁷, 1.2 ± 0.24 × 10⁻²⁷, and 1.2 ± 0.24 × 10⁻²⁷ cm² using a 1064‐nm laser. A temperature‐controlled, small‐cavity (2.125 mm diameter) blackbody source was used to calibrate the signal output of the Raman spectrometers for these measurements. Standoff Raman detection of a 6‐mm‐thick sulfur specimen located at 1500 m from the pump laser and the Raman spectrometer was made using a 1.4‐W, CW, 785‐nm pump laser. Copyright © 2010 John Wiley & Sons, Ltd.     

Vibrational spectra and crystal structure of the di‐amino acid peptide cyclo(L‐Met‐L‐Met): comparison of experimental data and DFT calculations

Experimental Raman and FT‐IR spectra of solid‐state non‐deuterated and N‐deuterated samples of cyclo(L ‐Met‐L ‐Met) are reported and discussed. The Raman and FT‐IR results show characteristic amide I vibrations (Raman: 1649 cm⁻¹, infrared: 1675 cm⁻¹) for molecules exhibiting a cis amide conformation. A Raman band, assigned to the cis amide II vibrational mode, is observed at ∼1493 cm⁻¹ but no IR band is observed in this region. Cyclo(L ‐Met‐L ‐Met) crystallises in the triclinic space group P1 with one molecule per unit cell. The overall shape of the diketopiperazine (DKP) ring displays a (slightly distorted) boat conformation. The crystal packing employs two strong hydrogen bonds, which traverse the entire crystal via translational repeats. B3‐LYP/cc‐pVDZ calculations of the structure of the molecule predict a boat conformation for the DKP ring, in agreement with the experimentally determined X‐ray structure. Copyright © 2009 John Wiley & Sons, Ltd.