RAFT Polymerization of N‐[3‐(Trimethoxysilyl)‐propyl]acrylamide and Its Versatile Use in Silica Hybrid Materials

Reversible addition–fragmentation chain transfer (RAFT) polymerization and characterization of an alkoxysilane acrylamide monomer using a trithiocarbonate chain transfer agent are described. Poly(N‐[3‐(trimethoxysilyl)propyl]acrylamide) (PTMSPAA) homopolymers are obtained with good control over the polymerization. A linear increase in the molecular weight is observed whereas the polydispersity values do not exceed 1.2 regardless of the monomer conversion. Moreover, PTMSPAA is used as a macro‐RAFT agent to polymerize N‐isopropylacrylamide (NIPAM). By varying the degree of polymerization of NIPAM within the block copolymer, different sizes of thermoresponsive particles are obtained. These particles are stabilized by the condensation of the alkoxysilane moieties of the polymers. Furthermore, a co‐network of silica and PTMSPAA is prepared using the sol–gel process. After drying, transparent mesoporous hybrids are obtained with a surface area of up to 400 m² g⁻¹.

     

Sustained Drug Release by Thermoresponsive Sol–Gel Hybrid Hydrogels of Poly(N‐Isopropylacrylamide‐co‐3‐(Trimethoxysilyl)Propyl Methacrylate) Copolymers

Poly(N‐isopropylacrylamide‐co‐3‐(trimethoxysilyl)propyl methacrylate), P(NIPAAm‐co‐TMSPMA), copolymers with relatively high TMSPMA contents without insoluble fraction are successfully synthesized. Subsequent sol–gel reactions in both the absence and presence of tetraethyl orthosilicate lead to gels with high gel fractions. The resulting gels undergo gel collapse at 28.6–28.7 °C, i.e., below that of poly(N‐isopropylacrylamide) homopolymer of 34.3 °C. Unexpectedly, the theophylline‐loaded hybrid gels release the drug not only below but also above the gel collapse temperature (GCT) with considerable rates and released amounts of drug. Surprisingly, evaluation of the sustained release profiles by the Korsmeyer–Peppas equation indicates that the release occurs by Fickian diffusion above GCT, which can be attributed to the lack of significant drug–polymer interaction at such temperatures. These results can be widely applied for the design and utilization of TMSPMA‐based sol–gel polymer hybrids with desired release profiles of solutes below and above GCT for a variety of applications.

     

Controlled Radical Polymerization of 2,3‐Epithiopropyl Methacrylate

We report first results on the controlled radical polymerization of 2,3‐epithiopropyl methacrylate (ETMA) also known as thiiran‐2‐ylmethyl methacrylate. Reversible addition‐fragmentation chain transfer (RAFT) of ETMA was carried out in bulk and in solution, using AIBN as initiator and the chain transfer agents: cyanopropyl dithiobenzoate (CPDB) and cumyl dithiobenzoate (CDB). A linear increase of the number‐average molecular weight and decrease of the polydispersity with monomer conversion were observed using CPDB as transfer agent, indicating a controlled process. Atom transfer radical polymerization (ATRP) of ETMA was performed under different reaction conditions using copper bromide complexed by tertiary amine ligands and ethyl 2‐bromoisobutyrate (EBiB) or 2‐bromopropionitrile (BPN) as initiator. All experiments lead to a crosslinked polymer. Preliminary studies in the absence of initiator showed that the CuBr/ligand complex alone initiates the ring‐opening polymerization of thiirane leading to a poly(propylene sulfide) with pendant methacrylate groups.

     

Generation of highly stable amidate anion in anionic polymerization of 3‐(triethylsilyl)propyl isocyanate

To study living anionic polymerization, 3‐(triethylsilyl)propyl isocyanate (TEtSPI) monomer was synthesized by hydrosilylation of allylamine with triethylsilane and treatment of the resulting amine with triphosgene. The polymerization of TEtSPI was performed with sodium naphthalenide (Na‐Naph) as an initiator and in the absence and presence of sodium tetraphenylborate (NaBPh₄) as an additive in tetrahydrofuran (THF) at ?78 and at ?98 °C. A highly stabilized amidate anion for living polymerization of isocyanates was generated for the first time with the combined effect of the bulky substituent and the shielding action of the additive NaBPh₄, extending the living character at least up to 120 min at ?98 °C. Even the anion could exist at ?78 °C for 10 min. A block copolymer, poly(n‐hexyl isocyanate)‐b‐poly[(3‐triethylsilyl)propyl isocyanate]‐b‐poly(n‐hexyl isocyanate), was synthesized with quantitative yields and controlled molecular weights via living anionic polymerization in THF at ?78 °C for TEtSPI and ?98 °C for n‐hexyl isocyanate, respectively, with Na‐Naph with three times of NaBPh₄ as a common ion salt. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 933–940, 2004     

Near‐monodisperse α‐hydroxy and α,ω‐dihydroxy amine‐based polymers: Synthesis and characterization

α‐Hydroxy and α,ω‐dihydroxy polymers of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) of various molecular weights were synthesized by group transfer polymerization (GTP) in tetrahydrofuran (THF), using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene (MTS) as the initiator and tetrabutylammonium bibenzoate (TBABB) as the catalyst. The hydroxyl groups were introduced by adding one 2‐(trimethylsiloxy) ethyl methacrylate (TMSEMA) unit at one or at both ends of the polymer chain. The ends were converted to 2‐hydroxyethyl methacrylate (HEMA) units after the polymerization by acid‐catalyzed hydrolysis. Gel permeation chromatography (GPC) in THF and proton nuclear magnetic resonance (¹H‐NMR) spectroscopy in CDCl₃ were used to determine the molecular weight and composition of the polymers. These mono‐ and difunctional methacrylate polymers can be covalently linked at the hydroxy termini to form star polymers and model networks, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1597–1607, 1999     

Synthesis of syndiotactic‐rich star‐shaped poly(methyl methacrylate) by core‐first group transfer polymerization using N‐(trimethylsilyl)bis(trifluoromethanesulfonyl)imide

The N‐(trimethylsilyl)bis(trifluoromethanesulfonyl)imide‐catalyzed (Me₃SiNTf₂‐catalyzed) group transfer polymerization (GTP) of methyl methacrylate (MMA) has been studied for synthesizing stereospecific star‐shaped poly(methyl methacrylate)s (PMMAs). The catalytic property of Me₃SiNTf₂ for the GTP of MMA using 1‐methoxy‐1‐trimethylsilyloxy‐2‐methyl‐propene as the initiator was confirmed by a kinetic investigation and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry measurement. The initiating efficiency (f) of Me₃SiNTf₂ was 0.94–1.00, which was estimated by the value of M_n(calcd)/M_n(SEC). The Me₃SiNTf₂‐catalyzed GTP of MMA was carried out using initiators possessing three, four, and six MTS groups (MTS₃, MTS₄, and MTS₆, respectively) under the condition of [MMA]₀/[MTS₃, MTS₄, or MTS₆]₀ = 120 at ?55 °C. All the obtained PMMAs exhibited unimodal and narrow molecular weight distributions as M_w/M_ns = 1.03–1.04 and the M_w(MALS)s of the 3‐, 4‐, and 6‐armed star‐shaped PMMAs (PMMA₃, PMMA₄, and PMMA₆, respectively) were 12.9, 12.9, and 13.4 kgmol^?1, respectively, which fairly agreed with the calculated M_w(calcd) values. The syndiotacticities, rrs, of PMMA₃, PMMA₄, and PMMA₆ were in the range of 87–89%. The stereoblock synthesis of PMMA₃, PMMA₄, and PMMA₆ was performed by the first and second polymerizations at ?55 and 45 °C; the rrs of the first and second PMMA blocks were 87.0, 87.0, and 86.0% and 65.0, 65.0, and 64.0%, respectively. The glass transition temperatures (T_gs) were 118.1, 115.8, and 111.5 °C for the respective syndiotactic‐rich PMMA₃, PMMA₄, and PMMA₆ and 111.5, 109.7, and 107.6 °C for the respective stereoblock ones. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Rare Earth Metal‐Mediated Group Transfer Polymerization of Vinylphosphonates

Recent studies have shown that poly(vinylphosphonate)s are readily accessible by rare earth metal‐mediated group transfer polymerization (GTP). This article highlights the progress in this new field and advantages of GTP in comparison to classical anionic and radical polymerization approaches. Late lanthanide metallocenes proved to be efficient initiators and highly active catalysts for vinylphosphonate polymerization yielding polymers of precise molecular weight and low polydispersity. Using this method, our group has developed a surface‐initiated GTP to prepare poly(vinylphosphonate) brushes. In combination with different ester cleavage strategies, rare earth metal‐mediated GTP is an efficient way to create well‐defined high‐molecular‐weight poly(vinylphosphonic acid).     

Synthesis of a novel liquid crystal rod–coil star block copolymer consisting of poly(methyl methacrylate) and poly{2,5‐bis[(4‐methoxy‐phenyl)oxycarbonyl] styrene} via atom transfer radical polymerization

A bromine capped star‐shaped poly(methyl methacrylate) (S‐PMMA‐Br) was synthesized with CuBr/sparteine/PT‐Br as a catalyst and initiator to polymerize methyl methacrylate (MMA) according to atom transfer radical polymerization (ATRP). Then, with S‐PMMA‐Br as a macroinitiator, a series of new liquid crystal rod–coil star block copolymers with different molecular weights and low polydispersity were obtained by this method. The block architecture {coil‐conformation of the MMA segment and rigid‐rod conformation of 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl] styrene segment} of the four‐armed rod–coil star block copolymers were characterized by ¹H NMR. The liquid‐crystalline behavior of these copolymers was studied by differential scanning calorimetry and polarized optical microscopy. We found that the liquid‐crystalline behavior depends on the molecular weight of the rigid segment; only the four‐armed rod–coil star block copolymers with each arm's M_n,_GPC of the rigid block beyond 0.91 × 10⁴ g/mol could form liquid‐crystalline phases above the glass‐transition temperature of the rigid block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 733–741, 2005     

Synthesis of well‐defined 7‐arm and 21‐arm poly(N‐isopropylacrylamide) star polymers with β‐cyclodextrin cores via click chemistry and their thermal phase transition behavior in aqueous solution

The syntheses of well‐defined 7‐arm and 21‐arm poly(N‐isopropylacrylamide) (PNIPAM) star polymers possessing β‐cyclodextrin (β‐CD) cores were achieved via the combination of atom transfer radical polymerization (ATRP) and click reactions. Heptakis(6‐deoxy‐6‐azido)‐β‐cyclodextrin and heptakis[2,3,6‐tri‐O‐(2‐azidopropionyl)]‐β‐cyclodextrin, β‐CD‐(N₃)₇ and β‐CD‐(N₃)₂₁, precursors were prepared and thoroughly characterized by nuclear magnetic resonance and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. A series of alkynyl terminally functionalized PNIPAM (alkyne‐PNIPAM) linear precursors with varying degrees of polymerization (DP) were synthesized via atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide using propargyl 2‐chloropropionate as the initiator. The subsequent click reactions of alkyne‐PNIPAM with β‐CD‐(N₃)₇ and β‐CD‐(N₃)₂₁ led to the facile preparation of well‐defined 7‐arm and 21‐arm star polymers, namely β‐CD‐(PNIPAM)₇ and β‐CD‐(PNIPAM)₂₁. The thermal phase transition behavior of 7‐arm and 21‐arm star polymers with varying molecular weights were examined by temperature‐dependent turbidity and micro‐differential scanning calorimetry, and the results were compared to those of linear PNIPAM precursors. The anchoring of PNIPAM chain terminal to β‐CD cores and high local chain density for star polymers contributed to their considerably lower critical phase separation temperatures (T_c) and enthalpy changes during phase transition as compared with that of linear precursors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 404–419, 2009     

Atom Transfer Radical Polymerization of N‐Isopropylacrylamide

Summary: Controlled polymerization of N‐isopropylacrylamide (NIPAAM) was achieved by atom transfer radical polymerization (ATRP) using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/tris(2‐dimethylaminoethyl)amine (Me₆TREN) as a catalytic system. The polymerization was carried out in DMF:water 50:50 (v/v) mixed solvent at 20 °C. The first order kinetic plot was linear up to 92% conversion. Controlled molecular weights up to 2.2 × 10⁴ and low polydispersities (1.19) were obtained. The living character of the polymerization was also demonstrated by self‐blocking experiments. Block copolymers with N,N‐dimethylacrylamide (DMAAM) and 3‐sulfopropyl methacrylate (SPMA) were successfully prepared.

Molecular weights and polydispersities of polyNIPAAM versus NIPAAM conversion for two different degrees of polymerization.     

α,ω‐Nitroxide‐Capped Polystyrenes and Poly(butyl acrylate)s as Macroinitiators for the Free‐Radical Polymerization of Methyl Methacrylate

The use of a bisaminooxy compound as initiator for nitroxide‐mediated radical polymerization (NMRP) of styrene or n‐butyl acrylate allows the synthesis of α,ω‐nitroxide‐capped polymers. At high temperatures and with the addition of acetic anhydride, it was found that these polymers could be applied as macroinitiators in the free‐radical polymerization of methyl methacrylate. This enables the synthesis of block copolymers with only minor contents of homopolymer.

The structure of bis‐TIPNO, the bisaminooxy compound used as an initiator for the nitroxide‐mediated radical polymerization of styrene or n‐butyl acrylate.     

Microwave‐assisted synthesis of star‐shaped poly(ε‐caprolactone)‐block‐poly(L‐lactide) copolymers and the crystalline morphologies

A monomode microwave reactor was used for the synthesis of designed star‐shaped polymers, which were based on dipentaerythritol with six crystallizable arms of poly(ε‐caprolactone)‐b‐poly(L ‐lactide) (PCL‐b‐PLLA) copolymer via a two‐step ring‐opening polymerization (ROP). The effects of irradiation conditions on the molecular weight were studied. Microwave heating accelerated the ROP of CL and LLA, compared with the conventional heating method. The resultant hexa‐armed polymers were fully characterized by means of FTIR, ¹H NMR spectrum, and GPC. The investigation of thermal properties and crystalline behaviors indicated that the crystalline behaviors of polymers were largely depended on the macromolecular architecture and the length of the block chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterizations of the four‐armed amphiphilic block copolymer S[poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate)]4

The polymers poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate] (PDMDMA) and four‐armed PDMDMA with well‐defined structures were prepared by the polymerization of (2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate (DMDMA) in the presence of an atom transfer radical polymerization (ATRP) initiator system. The successive hydrolyses of the polymers obtained produced the corresponding water‐soluble polymers poly(2,3‐dihydroxypropyl acrylate) (PDHPA) and four‐armed PDHPA. The controllable features for the ATRP of DMDMA were studied with kinetic measurements, gel permeation chromatography (GPC), and NMR data. With the macroinitiators PDMDMA–Br and four‐armed PDMDMA–Br in combination with CuBr and 2,2′‐bipyridine, the block polymerizations of methyl acrylate (MA) with PDMDMA were carried out to afford the AB diblock copolymer PDMDMA‐b‐MA and the four‐armed block copolymer S{poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate]‐block‐poly(methyl acrylate)}₄, respectively. The block copolymers were hydrolyzed in an acidic aqueous solution, and the amphiphilic diblock and four‐armed block copolymers poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate) were prepared successfully. The structures of these block copolymers were verified with NMR and GPC measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3062–3072, 2001     

Surface‐Initiated Atom Transfer Radical Polymerization of Oligo(ethylene glycol) Methacrylate: Effect of Solvent on Graft Density

Summary: Oligo(ethylene glycol) methacrylate (OEGMA) was grafted from silicon wafer surfaces by surface‐initiated atom transfer radical polymerization (ATRP) with Cu^I Br/2,2′‐bipyridine (bpy) as a catalyst and various water/alcohol mixtures as solvents. The ellipsometric thickness of the poly(OEGMA) layer on the surface increased linearly with monomer conversion in solution. High graft densities were achieved in alcohols. The graft density of poly(OEGMA) in methanol was found to be 0.26 chains · nm⁻², which is 50% higher than that in water/methanol (30:70, v/v). The differences in graft density were correlated to the conformation of tethered poly(OEGMA) chains. Large poly(OEGMA) coils on the surface in the presence of water limited the access of initiation sites to the catalyst complex and monomer molecules.

Development of poly(OEGMA) layer thickness on the silicon surface vs monomer conversion.     

Atom‐Transfer Radical Polymerization of 2‐(N,N‐Dimethylamino)ethyl Acrylate

ATRP of 2‐(N,N‐dimethylamino)ethyl acrylate (DMAEA) was investigated using CuBr or CuCl with different multidentate ligands. The catalyst was found active for DMAEA polymerization when ligated with tris[2‐(N,N‐dimethylamino)ethyl]amine. Good control over molecular weight was achieved, but quaternization of the terminal monomeric/polymeric tertiary amine by the C Br group of polyDMAEA caused chain termination. Using a chloride‐based system helped to suppress chain termination. Amphiphilic poly(methyl acrylate)‐block‐polyDMAEA was synthesized using polyMA as a macroinitiator.

Molecular weights and polydispersities of polyDMAEA versus DMAEA conversion for different catalyst systems.     

ABA and Star Amphiphilic Block Copolymers Composed of Polymethacrylate Bearing a Galactose Fragment and Poly(ε‐caprolactone)

Novel ABA and star amphiphilic block copolymers of poly(vinyl sugars) with biodegradable hydrophobic poly(ε‐caprolactone) segments are presented. They were prepared by a combination of ring‐opening polymerization of ε‐caprolactone and atom‐transfer radical polymerization of methacrylate‐bearing isopropylidene‐protected galactose. Subsequently, the protecting groups of the sugar fragments were removed by treatment with 80% formic acid.     

Synthesis and characterization of six‐arm star polystyrene‐block‐poly (3‐hexylthiophene) copolymer by combination of atom transfer radical polymerization and click reaction

A novel six‐arm star block copolymer comprising polystyrene (PS) linked to the center and π‐conjugated poly (3‐hexylthiophene) (P3HT) was successfully synthesized using a combination of atom transfer radical polymerization (ATRP) and click reaction. First, star‐shaped PS with six arms was prepared via ATRP of styrene with the discotic six‐functional initiator, 2,3,6,7,10,11‐hexakis(2‐bromoisobutyryloxy)triphenylene. Next, the terminal bromides of the star‐shaped PS were substituted with azide groups. Afterward, the six‐arm star block copolymer PS‐b‐P3HT was prepared using the click coupling reaction of azide‐terminated star‐shaped PS with alkynyl‐terminated P3HT. Various techniques including ¹H NMR, Fourier‐transform infrared and size‐exclusion chromatography were applied to characterize the chemical structures of the intermediates and the target block copolymers. Their thermal behaviors and optical properties were investigated using differential scanning calorimetry and UV–vis spectroscopy. Moreover, atomic force microscopy (AFM) was utilized to observe the morphology of the star block copolymer films. In comparison with two linear diblock copolymer counterparts, AFM results reveal the effect of the star block copolymer architecture on the microphase separation‐induced morphology in thin films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile synthesis for well‐defined A2B miktoarm star copolymer of poly(3‐hexylthiophene) and poly(methyl methacrylate) by the combination of anionic polymerization and click reaction

We have introduced a facile synthetic route for well‐defined A₂B miktoarm star copolymer composed of regioregular poly(3‐hexylthiophene) and poly(methyl methacrylate) ((P3HT)₂PMMA) by the combination of anionic polymerization and click reaction. First, we synthesized PMMA terminated with 1,3,5‐tris(bromomethyl)benzene (PMMA‐(Br)₂) by anionic polymerization, and two bromines attached to the end of the PMMA chains were replaced by azides (PMMA‐(N₃)₂). Also, monoethynyl‐capped P3HT was synthesized by Grignard metathesis polymerization and post‐end functionalization. Then, copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition click reaction between monoethynyl‐capped P3HT and PMMA‐(N₃)₂ was performed to synthesize (P3HT)₂PMMA. We used a slightly excess amount of monoethynyl‐capped P3HT so that all of the azide groups at the end of the PMMA chains completely reacted with monoethynyl‐capped P3HT. After complete removal of unreacted monoethynyl‐capped P3HT by column chromatography, pure (P3HT)₂PMMA with narrow molecular weight distribution (the polydispersity of 1.18) was obtained. The weight fraction of P3HT and the total molecular weight of (P3HT)₂PMMA are 0.48 and 16,000, respectively. To investigate the effect of the chain architecture on optical property and thin‐film morphology, we synthesized two linear P3HT‐b‐PMMAs (P3HT‐b‐PMMA‐L and P3HT‐b‐PMMA‐H) with similar weight fraction of P3HT block (0.48 for P3HT‐b‐PMMA‐L and 0.45 for P3HT‐b‐PMMA‐H) but two different total molecular weights (7900 for P3HT‐b‐PMMA‐L and 15,300 for P3HT‐b‐PMMA‐H). UV–visible (UV–vis) absorption spectrum and the fibril width of (P3HT)2PMMA thin film were similar to those of P3HT‐b‐PMMA‐L thin film. However, UV–vis spectrum for P3HT‐b‐PMMA‐H thin film was red‐shifted and the fibril width of P3HT‐b‐PMMA‐H was much larger than that of (P3HT)₂PMMA. This indicates that the π–π interaction between P3HT arms in (P3HT)₂PMMA is strong enough to arrange two P3HT backbone chains in (P3HT)₂PMMA to stack one by one along the nanofibril axis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of Novel μ‐Star Copolymers with Poly(N‐Octyl Benzamide) and Poly(ε‐Caprolactone) Miktoarms through Chain‐Growth Condensation Polymerization,Styrenics‐Assisted Atom Transfer Radical Coupling,and Ring‐Opening Polymerization

Star copolymers are known to phase separate on the nanoscale, providing useful self‐assembled morphologies. In this study, the authors investigate synthesis and assembly behavior of miktoarm star (μ‐star) copolymers. The authors employ a new strategy for the synthesis of unprecedented μ‐star copolymers presenting poly(N‐octyl benzamide) (PBA) and poly(ε‐caprolactone) (PCL) arms: a combination of chain‐growth condensation polymerization, styrenics‐assisted atom transfer radical coupling, and ring‐opening polymerization. Gel permeation chromatography, mass‐analyzed laser desorption/ionization mass spectrometry, and ¹H NMR spectroscopy reveal the successful synthesis of a well‐defined (PBA₁₁)₂‐(PCL₁₅)₄ μ‐star copolymer (M _n,NMR ≈ 12 620; Đ = 1.22). Preliminary examination of the PBA₂PCL₄ μ‐star copolymer reveals assembled nanofibers having a uniform diameter of ≈20 nm.