A pH‐responsive core cross‐linked star (CCS) polymer containing poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) arms was used as an interfacial stabilizer for emulsions containing toluene (80 v%) and water (20 v%). In the pH range of 12.1‐9.3, ordinary water‐in‐oil emulsions were formed. Intermediate multiple emulsions of oil‐in‐water‐in‐oil and water‐in‐oil‐in‐water were formed at pH 8.6 and 7.5, respectively. Further lowering the pH resulted in the formation of gelled high internal phase emulsions of oil‐in‐water type in the pH range of 6.4‐0.6. The emulsion behavior was correlated with interfacial tension, conductivity and configuration of the CCS polymer at different pH.
A novel diblock copolymer consisting of poly(vinylferrocene) (PVFc) and poly(N,N‐diethylacrylamide) (PDEA) is synthesized via a combination of anionic and RAFT polymerization. The use of a novel route to hydroxyl‐end‐functionalized metallopolymers in anionic polymerization and subsequent esterification with a RAFT agent leads to a PVFc macro‐CTA ( = 3800 g mol−1; Đ = 1.17). RAFT polymerization with DEA affords block copolymers as evidenced by 1H NMR spectroscopy as well as size exclusion chromatography (6400 ≤ ≤ 33700 g mol−1; 1.31 ≤ Đ 1.28). Self‐assembly of the amphiphilic block copolymers in aqueous solution leads to micelles as shown via TEM. Importantly, the distinct thermo‐responsive and redox‐responsive character of the blocks is probed via dynamic light scattering and found to be individually and repeatedly addressable.
Poly (N‐isopropylacrylamide) (pNIPAm)‐based hydrogels and hydrogel particles (microgels) have been extensively studied since their discovery and “popularization” a few decades ago. While their uses seem to have no bounds, this Feature Article is focused on their development and application for sensing small molecules, macromolecules, and biomolecules. Hydrogel/microgel‐based photonic materials with order in one, two, or three dimensions are highlighted, which exhibit optical properties that depend on the presence and concentration of various analytes.
In this study, a material is designed which combines the properties of shape‐memory and electroactive polymers. This is achieved by covalent cross‐linking of polyvinylidene fluoride. The resulting polymer network exhibits excellent shape‐memory properties with a storable strain of 200%, and fixity as well as recovery values of 100%. Programming upon rolling induces the transformation from the nonelectroactive α‐phase to the piezoelectric β‐phase. The highest β‐phase content is found to be 83% for a programming strain of 200% affording a d33 value of −30 pm V−1. This is in good accordance with literature known values for piezoelectric properties. Thermal triggering this material does not only result in a shape change but also renders the material nonelectroactive.
AB′ type monomers containing a thiolactone unit and vinyl ether moiety have been prepared with high yields. Aminolysis of the thiolactone moiety generates the corresponding thiol in situ, and upon UV‐irradiation, radical polyaddition occurs in the same medium, yielding linear poly(amide‐urethane)s with different side chain residues and (Poly(Ethylene Oxide)) PEO‐like backbone. Moreover, these unique polymers feature lower critical solution temperature behavior in water. Systematic modification of the responsive polymers reveals the influence of the variation of the side chains and the backbone structure on the corresponding solubility properties. In selected cases, multiresponsive polymers have been developed, which also respond to pH and metal concentration.
A self‐healing hydrogel is prepared by crosslinking acrylamide with a host–guest macro‐crosslinker assembled from poly(β‐cyclodextrin) nanogel and azobenzeneacrylamide. The photoisomerizable azobenzene moiety can change its binding affinity with β‐cyclodextrin, therefore the crosslinking density and rheology property of the hydrogel can be tuned with light stimulus. The hydrogel can repair its wound autonomously through the dynamic host–guest interaction. In addition, the wounded hydrogel will lose its ability of self‐healing when exposed to ultraviolet light, and the self‐healing behavior can be recovered upon the irradiation of visible light. The utilizing of host–guest macro‐crosslinking approach manifests the as‐prepared hydrogel reversible and light‐switchable self‐healing property, which would broaden the potential applications of self‐healing polymers.
The term hydrogel describes a type of soft and wet material formed by cross‐linked hydrophilic polymers. The distinct feature of hydrogels is their ability to absorb a large amount of water and swell. The properties of a hydrogel are usually determined by the chemical properties of their constituent polymer(s). However, a group of hydrogels, called “smart hydrogels,” changes properties in response to environmental changes or external stimuli. Recently, DNA or DNA‐inspired responsive hydrogels have attracted considerable attention in construction of smart hydrogels because of the intrinsic advantages of DNA. As a biological polymer, DNA is hydrophilic, biocompatible, and highly programmable by Watson‐Crick base pairing. DNA can form a hydrogel by itself under certain conditions, and it can also be incorporated into synthetic polymers to form DNA‐hybrid hydrogels. Functional DNAs, such as aptamers and DNAzymes, provide additional molecular recognition capabilities and versatility. In this Review, DNA‐based hydrogels are discussed in terms of their stimulus response, as well as their applications.
Stimuli responsive surfaces that show reversible fluorescence switching behavior in response to temperature changes were fabricated. Oligo(ethylene glycol) methacrylate thermoresponsive polymers with amine end‐groups were prepared by atom transfer radical polymerization (ATRP). The polymers were patterned on silicon surfaces by electron beam (e‐beam) lithography, followed by conjugation of self‐quenching fluorophores. Fluorophore conjugated hydrogel thin films were bright when the gels were swollen; upon temperature‐induced collapse of the gels, self‐quenching of the fluorophores led to significant attenuation of fluorescence. Importantly, the fluorescence was regained when the temperature was cooled. The fluorescence switching behavior of the hydrogels for up to ten cycles was investigated and the swelling‐collapse was verified by atomic force microscopy. Morphing surfaces that change shape several times upon increase in temperature were obtained by patterning multiple stimuli responsive polymers.
Polymer beads have attracted considerable interest for use in catalysis, drug delivery, and photonics due to their particular shape and surface morphology. Electrospinning, typically used for producing nanofibers, can also be used to fabricate polymer beads if the solution has a sufficiently low concentration. In this work, a novel approach for producing more uniform, intact beads is presented by electrospinning self‐assembled block copolymer (BCP) solutions. This approach allows a relatively high polymer concentration to be used, yet with a low degree of entanglement between polymer chains due to microphase separation of the BCP in a selective solvent system. Herein, to demonstrate the technology, a well‐studied polystyrene‐poly(ethylene butylene)–polystyrene triblock copolymer is dissolved in a co‐solvent system. The effect of solvent composition on the characteristics of the fibers and beads is intensively studied, and the mechanism of this fiber‐to‐bead is found to be dependent on microphase separation of the BCP.
Here, a novel multi‐stimuli‐responsive fluorescence probe is developed by incorporating spiropyran group into the coumarin‐substituted polydiacetylene (PDA) vesicles. The fluorescence of PDA can be turned on upon heating, and can be quenched upon exposure to UV light irradiation or pH stimuli owing to the fluorescene resonance energy transfer (FRET) between the red‐phase PDA and the open merocyanine (MC) form of spiropyran. Moreover, we have designed and experimentally realized a set of logic gate operations for the first time based on the fluorescence modulation of the designed system upon thermal, photo, and pH stimuli. This novel type of resettable logic gates augur well for practical applications in information storage, optical recording, and sensing in complicated microenvironments.
This communication describes the first application of cycloaddition between an in situ generated nitrile oxide with norbornene leading to a polymer crosslinking reaction for the preparation of poly(ethylene glycol) hydrogels under physiological conditions. Hydrogels with high water content and robust physical strength are readily formed within 2–5 min by a simple two‐solution mixing method which allows 3D encapsulation of neuronal cells. This bioorthogonal crosslinking reaction provides a simple yet highly effective method for preparation of hydrogels to be used in bioengineering.
In the last decades, metallopolymers have received great attention due to their various applications in the fields of materials and chemistry. In this article, a neutral 18‐electron exo‐substituted η4‐cyclopentadiene CpCo(I) unit‐containing polymer is prepared in a controlled/“living” fashion by combining facile click chemistry and ring‐opening metathesis polymerization (ROMP). This Co(I)‐containing polymer is further used as a heterogeneous macromolecular catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate and styrene.
For most stimuli‐responsive polymer materials (SRPMs), such as polymer gels, micelles, and brushes, the responsive mechanism is based on the solubility or compatibility with liquid media. That basis always results in distorting or collapsing the material's appearance and relies on external liquids. Here, a novel kind of SRPMs is proposed. Unlike most SRPMs, liquid is stored within special domains rather than expelled, so it is deforming‐free and relying on no external liquid, which is referred to as self‐storage SRPMs (SS‐SRPMs). The facile and universal route to fabricate SS‐SRPMs allows for another novel family of SRPMs. Furthermore, it is validated that SS‐SRPMs can drastically respond to outside temperature like switchers, especially for optical and electrochemical responses. Those features hold prospects for applications in functional devices, such as smart optical lenses or anti‐self‐discharge electrolytes for energy devices.
The synthesis of a novel photoreactive poly(ethylene glycol) (PEG)‐based polymer with caged carbonyl groups is reported. We further demonstrate its use for the on‐demand fabrication of hydrogels. For rapid gelation, a hydrazide‐functionalized PEG is used as the second component for the hydrogel preparation. The photoreactive PEG‐based polymer is designed for controlled cleavage of the protecting groups upon exposure to UV light releases free aldehyde moieties, which readily react with hydrazide groups in situ. This hydrogel system may find applications in controlled release drug delivery applications, when combined with in situ gelation. Furthermore, the possibility of forming gels specifically upon UV irradiation gives an opportunity for 3D fabrication of degradable scaffolds.
A new approach to stabilize carbon nanotubes (CNTs) in aqueous solution with a reduction‐responsive water‐soluble polymer is reported. The novel polymer synthesized by a controlled radical polymerization is functionalized with pendant pyrene groups capable of adhering to the surface of CNTs through π–π noncovalent interactions, and labeled with disulfide linkages to exhibit reduction‐responsive cleavage. Upon the cleavage of junction disulfide linkages in a reducing environment, water‐soluble polymers are shed, retaining clean CNT surfaces for electrochemical catalytic reactions.
A convenient synthetic approach for the preparation of uniform metallopolymer‐containing hollow spheres based on 2‐(methacryloyloxy)ethyl ferrocenecarboxylate (FcMA) as monomer by sequential starved feed emulsion polymerization is described. Core/shell particles consisting of a noncrosslinked poly(methyl methacrylate) core and a slightly crosslinked ferrocene‐containing shell allows for the simple dissolution of core material and, thus, monodisperse metallopolymer hollow spheres are obtained. Since PFcMA is incorporated in the particle shell, herein investigated hollow spheres can be addressed by external triggers, i.e., solvent variation and redox chemistry in order to change the particle swelling capability. PFcMA‐containing core/shell particles and hollow spheres are characterized by transmission electron microscope (TEM), scanning electron microscopy, cryogenic TEM, thermogravimetric analysis, and dynamic light scattering in terms of size, size distribution, hollow sphere character, redox‐responsiveness, and composition. Moreover, the general suitability of prepared stimulus‐responsive nanocapsules for the use in catch‐release systems is demonstrated by loading the nanocapsules with malachite green as model payload followed by release studies.
Hypoxia plays a critical role in the development and wound healing process, as well as a number of pathological conditions. Here, dextran‐based hypoxia‐inducible (Dex‐HI) hydrogels formed with in situ oxygen consumption via a laccase−medicated reaction are reported. Oxygen levels and gradients were accurately predicted by mathematical simulation. It is demonstrated that Dex‐HI hydrogels provide prolonged hypoxic conditions up to 12 h. The Dex‐HI hydrogel offers an innovative approach to delineate not only the mechanism by which hypoxia regulates cellular responses, but may facilitate the discovery of new pathways involved in the generation of hypoxic and oxygen gradient environments.
The sodium salt of the new bis(mesitoyl)phosphinic acid (BAPO‐OH) can be prepared in a very efficient one‐pot synthesis. It is well soluble in water and hydrolytically stable for at least several weeks. Remarkably, it acts as an initiating agent for the surfactant‐free emulsion polymerization (SFEP) of styrene to yield monodisperse, spherical nanoparticles. Time‐resolved electron paramagnetic resonance (TR‐EPR) and chemically induced electron polarisation (CIDEP) indicate preliminary mechanistic insights.
A self‐consistent field theoretic study is performed to study morphological development of lamellae‐forming diblock copolymers on substrates with a well‐defined roughness, modeled as trenches of varying depth and width engraved into the substrates. There are three possible lamellar orientations observed: horizontal lamellae, vertical lamellae that are parallel to the trench direction, and vertical lamellae that are perpendicular to the trench direction. Which of these three morphologies formed depends upon the trench width and surface affinity; however, trench depth has a relatively insignificant effect on the morphological development. Therefore, tuning trench width, but not trench depth, should allow for a reduction of the morphological defect density in directed self‐assembly of lamellar morphology of diblock copolymers.
To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)‐co‐(glycolic acid)] (P(EG‐co‐GA)) via a ruthenium‐catalyzed, post‐polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG‐co‐GA) copolymers are shown to undergo hydrolysis under mild conditions.
