Quantitative phase imaging (QPI), a method that precisely recovers the wavefront of an electromagnetic field scattered by a transparent, weakly scattering object, is a rapidly growing field of study. By solving the inverse scattering problem, the structure of the scattering object can be reconstructed from QPI data. In the past decade, 3D optical tomographic reconstruction methods based on QPI techniques to solve inverse scattering problems have made significant progress. In this review, we highlight a number of these advances and developments. In particular, we cover in depth Fourier transform light scattering (FTLS), optical diffraction tomography (ODT), and white‐light diffraction tomography (WDT).
An ultrathin Huygens metasurface is proposed to manipulate orthogonally polarized transmitted waves independently. The Huygens metasurface consists of two layers of dielectric substrates and three layers of artificial metallic structures with ultrathin electric thickness. In physics, two orthogonal electric dipoles and two orthogonal magnetic dipoles are supported by each unit cell of the metasurface, which enable the complete control of phase distributions in both vertical and horizontal directions. Based on this feature, a polarization beam splitter with large splitting angle is designed and fabricated to demonstrate the capability and flexibility of the proposed Huygens metasurface. The numerical simulations and measurement results have a good match, indicating the good performance on independent controls of orthogonally polarized transmitted waves.
Optical waveguide theory is an established part of optical physics. Yet only recently have fundamental phenomena such as spatial eigenmodes and principal modes been demonstrated experimentally. This work leverages recently developed techniques enabling detailed spatiotemporal characterisation of multimode fibre to provide new insights into the fundamentals of fibre propagation. This paper presents detailed analysis of all 420 of a fibre's principal modes and spatial eigenmodes and compares the similarity and differences between these two phenomena. It was found that even over very short lengths, the principal modes can not only significantly suppress modal dispersion but are also a more physically meaningful basis than spatial eigenmodes.
We demonstrate both analytically and numerically the existence of optical pulling forces acting on particles located near plasmonic interfaces. Two main factors contribute to the appearance of this negative recoil force. The interference between the incident and reflected waves induces a rotating dipole with an asymmetric scattering pattern, while the directional excitation of surface plasmon polaritons (SPPs) enhances the linear momentum of scattered light. The strongly asymmetric SPP excitation is determined by spin–orbit coupling of the rotating dipole and surface plasmon polariton. As a result of the total momentum conservation, the force acting on the particle points in a direction opposite to the incident wave propagation. We derive analytical expressions for the force acting on dipolar particles placed in the proximity of plasmonic surfaces. Analytical expressions for this pulling force are derived within the dipole approximation and are in excellent agreement with results of electromagnetic numerical calculations. The forces acting on larger particles are analyzed numerically, beyond the dipole approximation.
The fundamental formation process of nanogratings induced by focused ultrashort laser pulses inside the bulk of transparent materials is still object of intense debate. In particular the initial evolutionary steps, including the formation of anisotropic pores, alignment and arrangement in highly periodic grating planes could not been clarified up to now. To this end we have performed a comprehensive investigation of this process by optical retardance measurements, small‐angle X‐ray scattering, and focused ion beam milling in combination with scanning electron microscopy. The results show that the formation of nanogratings starts with isotropic, deterministic voids after the first incident laser pulse which start to elongate perpendicular to the laser scan direction with further illumination and the appearance of cracks along the scan direction. For increasing pulse overlap these cracks as well as randomly aligned voids build the template for the subsequent pore growth perpendicular to the laser polarization. The process of grating formation and subsequent period reduction occurs via increasing number of sheets and mutual realignment forming a more porous glass matrix.
In this work, we report optomechanical coupling, resolved sidebands and phonon lasing in a solid‐core microbottle resonator fabricated on a single mode optical fiber. Mechanical modes with quality factors (Qm) as high as 1.57 × 104 and 1.45 × 104 were observed, respectively, at the mechanical frequencies and . The maximum Hz is close to the theoretical lower bound of 6 × 1012 Hz needed to overcome thermal decoherence for resolved‐sideband cooling of mechanical motion at room temperature, suggesting microbottle resonators as a possible platform for this endeavor. In addition to optomechanical effects, scatter‐induced mode splitting and ringing phenomena, which are typical for high‐quality optical resonances, were also observed in a microbottle resonator.
This article reviews the state of the art of ultrafast transient absorption microscopy, discusses current experimental concepts and highlights future challenges. The advantages of transient absorption microscopy over other micro‐spectroscopic techniques are its high optical resolution combined with high temporal resolution as well as its ability to study non‐fluorescent and weakly fluorescent molecular species and to probe excited‐state processes. In conventional transient absorption spectroscopy the spectroscopic information usually presents a spatial average over the focal spot of the typically weakly focused probe beam. Transient absorption microscopy, however, enables investigations of the excited state dynamics in individual microscopic areas of a sample. Hence, the technique does not only yield detailed morphological information based on a label‐free molecular contrast, but also gives insight into the ultrafast morphology‐dependent photoinduced processes in heterogeneous samples. Different variations of transient absorption microscopy have found a number of applications ranging from material sciences to biology, which are discussed in this review together with different setup modifications and approaches towards transient absorption spectroscopy with spatial resolution below the diffraction limit.
Plasmonic waveguides are promising in many applications because of their subwavelength field confinement, which can strongly enhance light‐matter interactions. Nevertheless, how to efficiently evaluate their Kerr nonlinear performance is still an open question because of the presence of relatively large linear losses. Here a simple and versatile figure of merit (FOM) is proposed for Kerr nonlinear waveguides with linear losses. To derive the FOM, a generalized full‐vectorial nonlinear Schrödinger equation governing nonlinear pulse propagation in a lossy waveguide is developed, and an approximate analytic solution of the degenerate four wave mixing conversion efficiency is derived and validated. The effectiveness of the FOM is verified with an all‐plasmonic and a hybrid‐plasmonic waveguide configuration. Rigorous results show that the optimal waveguide length for the highest conversion efficiency is ln 3 times the attenuation length. At this length, the upper limits of the conversion efficiency and the nonlinear phase shift are determined by the FOM. These results provide fundamental theory and useful guidance in exploring plasmonic waveguides for nonlinear optical applications.
Near‐field optical microscopy techniques provide information on the amplitude and phase of local fields in samples of interest in nanooptics. However, the information on the near field is typically obtained by converting it into propagating far fields where the signal is detected. This is the case, for instance, in polarization‐resolved scattering‐type scanning near‐field optical microscopy (s‐SNOM), where a sharp dielectric tip scatters the local near field off the antenna to the far field. Up to now, basic models have interpreted S‐ and P‐polarized maps obtained in s‐SNOM as directly proportional to the in‐plane ( or ) and out‐of‐plane () near‐field components of the antenna, respectively, at the position of the probing tip. Here, a novel model that includes the multiple‐scattering process of the probing tip and the nanoantenna is developed, with use of the reciprocity theorem of electromagnetism. This novel theoretical framework provides new insights into the interpretation of s‐SNOM near‐field maps: the model reveals that the fields detected by polarization‐resolved interferometric s‐SNOM do not correlate with a single component of the local near field, but rather with a complex combination of the different local near‐field components at each point (, and ). Furthermore, depending on the detection scheme (S‐ or P‐polarization), a different scaling of the scattered fields as a function of the local near‐field enhancement is obtained. The theoretical findings are corroborated by s‐SNOM experiments which map the near field of linear and gap plasmonic antennas. This new interpretation of nanoantenna s‐SNOM maps as a complex‐valued combination of vectorial local near fields is crucial to correctly understand scattering‐type near‐field microscopy measurements as well as to interpret the signals obtained in field‐enhanced spectroscopy.
Monocrystalline titanium dioxide (TiO2) micro‐spheres support two orthogonal magnetic dipole modes at terahertz (THz) frequencies due to strong dielectric anisotropy. For the first time, we experimentally detected the splitting of the first Mie mode in spheres of radii m through near‐field time‐domain THz spectroscopy. By fitting the Fano lineshape model to the experimentally obtained spectra of the electric field detected by the sub‐wavelength aperture probe, we found that the magnetic dipole resonances in TiO2 spheres have narrow linewidths of only tens of gigahertz. Anisotropic TiO2 micro‐resonators can be used to enhance the interplay of magnetic and electric dipole resonances in the emerging THz all‐dielectric metamaterial technology.
High performance semiconductor lasers on silicon are critical elements of next generation photonic integrated circuits. Transfer printing methods provide promising paths to achieve hybrid integration of III‐V devices on Si platforms. This paper presents materials and procedures for epitaxially releasing thin‐film microscale GaAs based lasers after their full fabrication on GaAs native substrates, and for subsequently transfer printing arrays of them onto Si wafers. An indium‐silver based alloy serves as a thermally conductive bonding interface between the lasers and the Si, for enhanced performance. Numerical calculations provide comparative insights into thermal properties for devices with metallic, organic and semiconductor interfaces. Under current injection, the first of these three interfaces provides, by far, the lowest operating temperatures. Such devices exhibit continuous‐wave lasing in the near‐infrared range under electrical pumping, with performance comparable to unreleased devices on their native substrates.
Optical whispering‐gallery mode (WGM) microcavities featuring ultrahigh Q factors and small mode volumes enhance significantly the interaction between light and matter, becoming an excellent platform for achieving ultralow‐threshold microlasers. However, the emission of traditional WGMs is isotropic due to the rotational symmetry of cavity geometries, which hinders the potential photonics applications. In this review, the progress in WGM microcavities towards unidirectional laser emission is summarized. When a subwavelength scatterer is placed on the boundary of the microcavity, the unidirectional emission occurs due to the collimation effect of the microcavity‐enhanced scattering field. Furthermore, microcavities deformed from the circular shapes can not only produce the chaos‐assisted unidirectional emission, but also maintain high Q factors by special design and fabrication processes. Finally, gratings along the circumference of the WGM microdisk or microring can scatter the WGMs in the vertical direction. The review also lists several important applications of these types of microcavities, such as wide‐band laser illumination source, free‐space coupling, evanescent‐field enhancement, optical energy storage, and sensing.
The design of micro‐optical resonator arrays are introduced and tailored towards refractive index sensing applications, building on the previously unexplored benefits of open dielectric stacks. The resonant coupling of identical hollow cavities present strong and narrow spectral resonance bands beyond that available with a single Fabry Perot interferometer. Femtosecond laser irradiation with selective chemical etching is applied to precisely fabricate stacked and waveguide‐coupled open resonators into fused silica, taking advantage of small 12 nm rms surface roughness made available by the self‐alignment of nanograting planes. Refractive index sensing of methanol‐water solutions confirm a very attractive sensing resolution of 6.5 × 10−5 RIU. Such high finesse optical elements open a new realm of optofluidic sensing and integrated optical circuit concepts for detecting minute changes in sample properties against a control solution that may find importance in chemical and biological sensors, telecom sensing networks, biomedical probes, and low‐cost health care products.
Narrow‐linewidth lasers are key elements in optical metrology and spectroscopy. Spectral purity of these lasers determines accuracy of the measurements and quality of collected data. Solid state and fiber lasers are stabilized to relatively large and complex external optical cavities or narrow atomic and molecular transitions to improve their spectral purity. While this stabilization technique is rather generic, its complexity increases tremendously moving to longer wavelenghts, to the infrared (IR) range. Inherent increase of losses of optical materials at longer wavelengths hinders realization of compact, room temperature, high finesse IR cavities suitable for laser stabilization. In this paper, we report on demonstration of quantum cascade lasers stabilized to high‐Q crystalline mid‐IR microcavities. The lasers operating at room temperature in the 4.3‐4.6 μm region have a linewidth approaching 10 kHz and are promising for on‐chip mid‐IR and IR spectrometers.
This article presents a novel III‐V on silicon laser. This work exploits the phenomenon that a passive silicon cavity, side‐coupled to a III‐V waveguide, will provide high and narrow‐band reflectivity into the III‐V waveguide: the resonant mirror. This results in an electrically pumped laser with a threshold current of 4 mA and a side‐mode suppression ratio up to 48 dB.
Transport of subwavelength electromagnetic (EM) energy has been achieved through near‐field coupling of highly confined surface EM modes supported by plasmonic nanoparticles, in a configuration usually on a two‐dimensional (2D) substrate. Vertical transport of similar modes along the third dimension, on the other hand, can bring more flexibility in designs of functional photonic devices, but this phenomenon has not been observed in reality. In this paper, designer (or spoof) surface plasmon resonators (‘plasmonic meta‐atoms’) are stacked in the direction vertical to their individual planes in demonstrating vertical transport of subwavelength localized surface EM modes. The dispersion relation of this vertical transport is determined from coupled‐mode theory and is verified with a near‐field transmission spectrum and field mapping with a microwave near‐field scanning stage. This work extends the near‐field coupled resonator optical waveguide (CROW) theory into the vertical direction, and may find applications in novel three‐dimensional slow‐light structures, filters, and photonic circuits.
We report complete spatial shaping (both phase and amplitude) of the second‐harmonic beam generated in a nonlinear photonic crystal. Using a collinear second‐order process in a nonlinear computer generated hologram imprinted on the crystal, the desired beam is generated on‐axis and in the near field. This enables compact and efficient one‐dimensional beam shaping in comparison to previously demonstrated off‐axis Fourier holograms. We experimentally demonstrate the second‐harmonic generation of high‐order Hermite–Gauss, top hats and arbitrary skyline‐shaped beams.
We reveal unusually strong polarization sensitivity of electric and magnetic dipole resonances of high‐index dielectric nanoparticles placed on a metallic film. By employing dark‐field spectroscopy, we observe the polarization‐controlled transformation from high‐Q magnetic‐dipole scattering to broadband suppression of scattering associated with the electric dipole mode, and show numerically that it is accompanied by a strong enhancement of the respective fields by the nanoparticle. Our experimental data for silicon nanospheres are in an excellent agreement with both analytical calculations based on Green's function approach and the full‐wave numerical simulations. Our findings further substantiate dielectric nanoparticles as strong candidates for many applications in enhanced sensing, spectroscopy and nonlinear processes at the nanoscale.
We demonstrate a high optoelectronic performance and application potential of our random network, with subwavelength diameter, ultralong, and high‐quality silver nanowires, stabilized on a substrate with a UV binder. Our networks show very good optoelectronic properties, with the single best figure of merit of ∼1686, and excellent stability under harsh mechanical strain, as well as thermal, and chemical challenge. Our network transparency strongly exceeds the simple shading limit. We show that this transmission enhancement is due to plasmonic refraction, which in an effective medium picture involves localized plasmons, and identify the inhomogeneous broadening as the key factor in promoting this mechanism. Such networks could become a basis for a next generation of ultrahigh‐performance transparent conductors.
Teleportation describes the transmission of information without transport of neither matter nor energy. For many years, however, it has been implicitly assumed that this scheme is of inherently nonlocal nature, and therefore exclusive to quantum systems. Here, we experimentally demonstrate that the concept of teleportation can be readily generalized beyond the quantum realm. We present an optical implementation of the teleportation protocol solely based on classical entanglement between spatial and modal degrees of freedom, entirely independent of nonlocality. Our findings could enable novel methods for distributing information between different transmission channels and may provide the means to leverage the advantages of both quantum and classical systems to create a robust hybrid communication infrastructure.
