Following Mie theory, nanoparticles made of a high‐refractive‐index dielectric, such as silicon, exhibit a resonator‐like behavior and very rich resonance spectra. Which electric or magnetic particle mode is excited depends on the wavelength, the refractive‐index contrast relative to the environment, and the geometry of the nanoparticle itself. In addition, the spatial structure of the impinging light field plays a major role in the excitation of the nanoparticle resonances. Here, it is shown that, by tailoring the excitation field, individual multipole resonances can be selectively addressed while suppressing the excitation of other particle modes. This enables a detailed study of selected individual resonances without interference by the other modes.
Silicon‐based technologies provide an ideal platform for the monolithic integration of photonics and microelectronics. In this context, a variety of passive and active silicon photonic devices have been developed to operate at telecom and datacom wavelengths, at which silicon has minimal optical absorption ‐ due to its bandgap of 1.12 eV. Although in principle this transparency window limits the use of silicon for optical detection at wavelengths above 1.1 μm, in recent years tremendous advances have been made in the field of all‐silicon sub‐bandgap photodetectors at telecom and datacom wavelengths. By taking advantage of emerging materials and novel structures, these devices are becoming competitive with the more well‐established technologies, and are opening new and intriguing perspectives. In this paper, a review of the state‐of‐the‐art is presented. Devices based on defect‐mediated absorption, two‐photon absorption and the internal photoemission effect are reported, their working principles are elucidated and their performance discussed and compared.
Microresonator‐based Kerr frequency comb (microcomb) generation can potentially revolutionize a variety of applications ranging from telecommunications to optical frequency synthesis. However, phase‐locked microcombs have generally had low conversion efficiency limited to a few percent. Here we report experimental results that achieve conversion efficiency ( on‐chip comb power excluding the pump) in the fiber telecommunication band with broadband mode‐locked dark‐pulse combs. We present a general analysis on the efficiency which is applicable to any phase‐locked microcomb state. The effective coupling condition for the pump as well as the duty cycle of localized time‐domain structures play a key role in determining the conversion efficiency. Our observation of high efficiency comb states is relevant for applications such as optical communications which require high power per comb line.
We report complete spatial shaping (both phase and amplitude) of the second‐harmonic beam generated in a nonlinear photonic crystal. Using a collinear second‐order process in a nonlinear computer generated hologram imprinted on the crystal, the desired beam is generated on‐axis and in the near field. This enables compact and efficient one‐dimensional beam shaping in comparison to previously demonstrated off‐axis Fourier holograms. We experimentally demonstrate the second‐harmonic generation of high‐order Hermite–Gauss, top hats and arbitrary skyline‐shaped beams.
The coupling of atomic and photonic resonances serves as an important tool for enhancing light‐matter interactions and enables the observation of multitude of fascinating and fundamental phenomena. Here, by exploiting the platform of atomic‐cladding wave guides, the resonant coupling of rubidium vapor and an atomic cladding micro ring resonator is experimentally demonstrated. Specifically, cavity‐atom coupling in the form of Fano resonances having a distinct dependency on the relative frequency detuning between the photonic and the atomic resonances is observed. Moreover, significant enhancement of the efficiency of all optical switching in the V‐type pump‐probe scheme is demonstrated. The coupled system of micro‐ring resonator and atomic vapor is a promising building block for a variety of light vapor experiments, as it offers a very small footprint, high degree of integration and extremely strong confinement of light and vapor. As such it may be used for important applications, such as all optical switching, dispersion engineering (e.g. slow and fast light) and metrology, as well as for the observation of important effects such as strong coupling, and Purcell enhancement.
Guiding light in the low index region of a high refractive index contrast waveguide can be beneficial for many applications including sensing, nonlinear optics and electro‐optics. Existing methods to achieve this goal suffer from fabrication complexity, large loss, or poor optical confinement. We propose a simple structure to achieve a significant enhancement of light confinement in the low index medium. We explain the guiding principle of this structure using geometrical optics, and suggest a number of applications where this guiding structure can provide significant performance benefits. The combination of simplicity, ease of fabrication, and good confinement makes this waveguide an attractive choice for a wide range of applications. To illustrate this, we consider the integration of a nonlinear polymer with a silicon photonic waveguide, and show that significantly better performance with an easier fabrication process can be achieved using this new scheme.
Ultracompact directional optical nanoantennas are rapidly gaining popularity yet still challenging tasks to construct at the nanoscale. Here, we experimentally demonstrate unidirectional emission from a fluorescent nanodiamond coupled with a single gold nanorod. Different configurations of the assembled hybrid nanostructures were realized via step‐by‐step atomic force microscope nanomanipulation. The emission patterns can be controlled by adjusting the configurations, i.e., the gold nanorod orientation and separation with respect to the nanodiamond. Numerical simulation results reveal that the unidirectional emission can be ascribed to the interference between the electromagnetic fields produced by the dipole‐like source and the out‐of‐phase dipole induced in the gold nanorod. The proposed hybrid nanostructures remarkably exhibit highly unidirectional emission even when the emitter is positioned up to 50 nm away from the nanorod antenna and present a broad working spectral bandwidth of ∼200 nm. The distinct features of this hybrid structure suggest potential applications for novel nanoscale light sources, sensing, and quantum information.
A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in the visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept, we design a mode‐locked frequency comb with thin‐film silicon nitride compound ring resonators in the vicinity of the rubidium D1 line (794.6 nm) and propose to use this optical comb as a flywheel for chip‐scale optical clocks.
This review presents an overview of “Lab on Fiber” technologies and devices with special focus on the design and development of advanced fiber optic nanoprobes for biological applications. Depending on the specific location where functional materials at micro and nanoscale are integrated, “Lab on Fiber Technology” is classified into three main paradigms: Lab on Tip (where functional materials are integrated onto the optical fiber tip), Lab around Fiber (where functional materials are integrated on the outer surface of optical fibers), and Lab in Fiber (where functional materials are integrated within the holey structure of specialty optical fibers). This work reviews the strategies, the main achievements and related devices developed in the “Lab on Fiber” roadmap, discussing perspectives and challenges that lie ahead, with special focus on biological sensing applications.
In this work, we report optomechanical coupling, resolved sidebands and phonon lasing in a solid‐core microbottle resonator fabricated on a single mode optical fiber. Mechanical modes with quality factors (Qm) as high as 1.57 × 104 and 1.45 × 104 were observed, respectively, at the mechanical frequencies and . The maximum Hz is close to the theoretical lower bound of 6 × 1012 Hz needed to overcome thermal decoherence for resolved‐sideband cooling of mechanical motion at room temperature, suggesting microbottle resonators as a possible platform for this endeavor. In addition to optomechanical effects, scatter‐induced mode splitting and ringing phenomena, which are typical for high‐quality optical resonances, were also observed in a microbottle resonator.
This paper investigates the singular optics of nonparaxial light beams in the near field when the light behaves as a tractor beam. New insights into the optical pulling force, which is usually represented by integrating the stress tensor at a black box enclosing the object, are interpreted by the optical singularity of the Poynting vector. The negative nonconservative pulling force originates from the transfer of the azimuthal Poynting vector to the longitudinal component partly owing to the presence of a scatterer. The separatrice pattern and singularity shifts of the Poynting vector unanimously exhibit a differentiable near‐field distribution in the presence of optical pulling force. A new method is established to calculate the near‐field optical force using the differential Poynting vector in the far field. The results obtained provide a clear physical interpretation of the light–matter interaction and manifest the significance of singular optics in manipulating objects.
Optical waveguide theory is an established part of optical physics. Yet only recently have fundamental phenomena such as spatial eigenmodes and principal modes been demonstrated experimentally. This work leverages recently developed techniques enabling detailed spatiotemporal characterisation of multimode fibre to provide new insights into the fundamentals of fibre propagation. This paper presents detailed analysis of all 420 of a fibre's principal modes and spatial eigenmodes and compares the similarity and differences between these two phenomena. It was found that even over very short lengths, the principal modes can not only significantly suppress modal dispersion but are also a more physically meaningful basis than spatial eigenmodes.
Whispering gallery modes (WGMs) have been exploited for a broad range of sensing applications. However, the vast majority of WGM sensors consist of passive resonators, requiring complex interrogation systems to be employed, ultimately limiting their practicality. Active resonators containing a gain medium, allowing remote excitation and collection of the WGM‐modulated fluorescence spectra, have emerged as an alternative to passive resonators. Although research is still in its infancy, recent progress has reduced the performance gap between the two paradigms, fueled by the potential for new applications that could not previously be realized. Here, recent developments in sensors based on active WGM microresonators are reviewed, beginning with a discussion of the theory of fluorescence‐based and lasing WGMs, followed by a discussion of the variety of gain media, resonator architectures, and emerging sensing applications. We conclude with a discussion of the prospects and future directions for improving active WGM sensors.
The broadband enhancement of single‑photon emission from nitrogen‐vacancy centers in nanodiamonds coupled to a planar multilayer metamaterial with hyperbolic dispersion is studied experimentally. The metamaterial is fabricated as an epitaxial metal/dielectric superlattice consisting of CMOS‐compatible ceramics: titanium nitride (TiN) and aluminum scandium nitride (AlxSc1‐xN). It is demonstrated that employing the metamaterial results in significant enhancement of collected single‑photon emission and reduction of the excited‐state lifetime. Our results could have an impact on future CMOS‐compatible integrated quantum sources.
A diode‐pumped Yb:YAG MOPA‐System for the unprecedented generation of transform limited pulses with variable pulse duration in the range between 10 ps and 100 ps is presented. First applications relying on unique pulse parameters as modulation free spectrum, tunability and coherence length, namely the direct laser interference patterning (DLIP) and laser cooling of stored relativistic ion beams are highlighted. Pulses are generated by a mode‐locked fs‐oscillator while the spectral bandwidth is narrowed in the subsequent regenerative amplifier by an intra‐cavity grating monochromator. Two alternative booster amplifiers were added to increase the pulse energy to 100 μJ and 10 mJ, respectively.
Teleportation describes the transmission of information without transport of neither matter nor energy. For many years, however, it has been implicitly assumed that this scheme is of inherently nonlocal nature, and therefore exclusive to quantum systems. Here, we experimentally demonstrate that the concept of teleportation can be readily generalized beyond the quantum realm. We present an optical implementation of the teleportation protocol solely based on classical entanglement between spatial and modal degrees of freedom, entirely independent of nonlocality. Our findings could enable novel methods for distributing information between different transmission channels and may provide the means to leverage the advantages of both quantum and classical systems to create a robust hybrid communication infrastructure.
