Electrochemical impedance spectroscopy (EIS) is applied for investigating binding of lectins to multivalent glycopolymer brushes grafted from interdigital gold microelectrodes. By variation of the measuring frequency, EIS allows simultaneous analysis of binding at different subnanometer distances from the sensor surfaces. In this way, the binding dynamics along the brushes are quantified, giving an idea about the motion of the lectin through the brush layer. Two different brush lengths are investigated, revealing distinct dynamics of lectin binding due to changing topology of the brushes. Moreover, very low KD values in the nanomolar range are obtained. This unique platform may be used as sophisticated biosensor for detailed investigation of high‐affinity protein binding to polymer layers.
A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.
A unique method of fabricating PS/AuNPs composite particles in ex situ mode is proposed on the basis of thermodynamically driving mechanism. It is facile and versatile as it eliminates the need for surface functionalizations and modifications of both PS microspheres and AuNPs. The PS/AuNPs composite particles take on a raspberry‐like morphology with controllable coverage according to some thermodynamic factors, which have been extensively characterized by scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. More importantly, the PS/AuNPs composite particles hold higher catalytic efficiency and better repeatability than the previously reported results, which are confirmed in two oxidation–reduction reactions of 2‐nitroaniline/NaBH4 and rhodamine B/NaBH4.
Two‐dimensional (2D) palladium nanocube array is achieved on plasma‐etched block copolymer templates, while the well‐aligned nanocubes remain active. Anisotropic nanocubes are site‐selectively assembled on various nanopatterns by capillary force. The nanocube array is proved to be easily tunable, and the dimensional commensurability plays a key role in the configurations of the nanocube assemblies. Not only catalytic nanocube array under confinement but also template for the growth of nanoscale zinc oxide (ZnO) nanorods is exemplified as the potential application of the nanoarray.
A simple strategy is provided to construct a novel pH‐ and sugar‐induced shape memory hydrogel based on dynamic phenylboronic acid (PBA)–diol interactions formed by PBA‐modified sodium alginate (Alg‐PBA) and poly(vinyl alcohol) (PVA). The dynamic PBA–diol ester bonds serve as temporary cross‐links and stabilize the deformed shape of the hydrogel. The disassociation of the PBA–diol ester bonds is explored in acidic conditions and aqueous solutions of glucose and fructose, which endow the hydrogel with shape memory performances.
Molecular bottle‐brush functionalized single‐walled carbon nanotubes (SWCNTs) with superior dispersibility in water are prepared by a one‐pot synthetic methodology. Elongating the main‐chain and side‐chain length of molecular bottle‐brushes can further increase SWCNT dispersibility. They show significant enhancement of SWCNT dispersibility up to four times higher than those of linear molecular functionalized SWCNTs.
The photochemical and electrochemical investigations of commercially available, safe, and cheap fluorescent brighteners, namely, triazinylstilbene (commercial name: fluorescent brightener 28) and 2,5‐bis(5‐tert‐butyl‐benzoxazol‐2‐yl)thiophene, as well as their original use as photoinitiators of polymerization upon light emitting diode (LED) irradiation are reported. Remarkably, their excellent near‐UV–visible absorption properties combined with outstanding fluorescent properties allow them to act as high‐performance photoinitiators when used in combination with diaryliodonium salt. These two‐component photoinitiating systems can be employed for free radical polymerizations of acrylate. In addition, this brightener‐initiated photopolymerization is able to overcome oxygen inhibition even upon irradiation with low LED light intensity. The underlying photochemical mechanisms are investigated by electron‐spin resonance‐spin trapping, fluorescence, cyclic voltammetry, and steady‐state photolysis techniques.
The novel hyperbranched poly(methyl acrylate)‐block‐poly(acrylic acid)s (HBPMA‐b‐PAAs) are successfully synthesized via single‐electron transfer‐living radical polymerization (SET‐LRP), followed with hydrolysis reaction. The copolymer solution could spontaneously form unimolecular micelles composed of the hydrophobic core (PMA) and the hydrophilic shell (PAA) in water. Results show that the size of spherical particles increases from 8.18 to 19.18 nm with increased pH from 3.0 to 12.0. Most interestingly, the unique regular quadrangular prisms with the large microstructure (5.70 μm in length, and 0.47 μm in width) are observed by the self‐assembly of unimolecular micelles when pH value is below 2. Such self‐assembly behavior of HBPMA‐b‐PAA in solution is significantly influenced by the pH cycle times and concentration, which show that increased polymer concentration favors aggregate growth.
Multivalent binding is a key for many critical biological processes and unique recognition and specificity in binding enables many of different glycans and proteins to work in a great harmony within the human body. In this study, the binding kinetics of synthetic glycopolypeptides to the dendritic cell lectin DC‐SIGN and their inhibition potential for DC‐SIGN interactions with the gp120 envelope glycoprotein of HIV‐1 (gp120) are investigated.
Stratified polymer brushes are fabricated using microcontact printing (μCP) of initiator integrated polydopamine (PDOPBr) on polymer brush surfaces and the following surface initiated atom transfer radical polymerization (SI‐ATRP). It is found that the surface energy, chemically active groups, and the antifouling ability of the polymer brushes affect transfer efficiency and adhesive stability of the polydopamine film. The stickiness of the PDOPBr pattern on polymer brush surfaces is stable enough to perform continuous μCP and SI‐ATRP to prepare stratified polymer brushes with a 3D topography, which have broad applications in cell and protein patterning, biosensors, and hybrid surfaces.
A triptycene‐based microporous organic polymer (MOP) in which 2,6‐bis(benzimidazol‐2‐yl)pyridine (bbp) is incorporated as linkage and coordination site is designed and synthesized. Pd(II) ions are further immobilized in this MOP through the coordination interactions between Pd(II) ion and nitrogen atoms of bbp. The resulting material shows high stability and exhibits excellent heterogeneously catalytic activity for the Suzuki–Miyaura cross‐coupling reaction. Its high efficiency can be maintained after being reused for a number of cycles.
The formation of a poly(2,6‐carbazole) derivative during an electrochemical polymerization process is shown. Comparison of 3,5‐bis(9‐octyl‐9H‐carbazol‐2‐yl)pyridine and 3,5‐bis(9‐octyl‐9H‐carbazol‐3‐yl)pyridine by electrochemical and UV–Vis‐NIR spectroelectrochemical measurements and DFT (density functional theory) calculation prove the formation of a poly(2,6‐carbazole) derivative. Both of the compounds form stable and electroactive conjugated polymers.
A free‐standing polymer brush film with tailored thicknesses based on a colorless polydopamine (PDA) thin layer is prepared and characterized. The surface‐initiated atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) is performed on a PDA layer with thickness of ca. 6 nm, which generated an optically transparent and colorless free‐standing PHEMA brush film (1.5 cm × 1.5 cm). Because the cross‐linked PDA layer is used as the base for the polymer brushes, the reported method does not require cross‐linking the polymer brushes. The free‐standing film thicknesses of ≈16–75 nm are controlled by simply changing the ATRP reaction time. The results show that the free‐standing PHEMA brush film transferred onto a plate exhibits a relatively smooth surface and is stable in any solvent.
Enzymatic catalysis and control over macromolecular architectures from reversible addition‐fragmentation chain transfer polymerization (RAFT) are combined to give a new method of making polymers. Horseradish peroxidase (HRP) is used to catalytically generate radicals using hydrogen peroxide and acetylacetone as a mediator. RAFT is used to control the polymer structure. HRP catalyzed RAFT polymerization gives acrylate and acrylamide polymers with relatively narrow molecular weight distributions. The polymerization is rapid, typically exceeding 90% monomer conversion in 30 min. Complex macromolecular architectures including a block copolymer and a protein‐polymer conjugate are synthesized using HRP to catalytically initiate RAFT polymerization.
Glycopolymers attached to a surface possess the ability to bind to certain carbohydrate binding proteins in a highly specific manner, and because of this, the fabrication of glycopolymer‐modified surfaces has evolved as an effective route toward bioresponsive systems. Poly(N‐3,4‐dihydroxybenzenethyl methacrylamide‐co‐2‐(methacrylamido) glucopyranose) copolymers, containing sugar and catechol functionalities, are for the first time successfully prepared in a well‐controlled manner via room temperature single‐electron transfer initiation and propagation through radical addition fragmentation chain transfer technique. The polymerization behavior is investigated and it presents controlled features with first‐order kinetics and linear relationships between molecular weights and monomer conversions. Moreover, the copolymers are used to modify different types of surfaces (silicon, steel, and plastic), the properties of the surfaces and the specific lectin‐binding abilities are investigated by a combination of water contact angle, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectra, scanning electron microscopy with energy dispersive X‐ray (SEM/EDX), atomic force microscopy, and confocal microscope measurements.
Copolymers of 2‐(methacrylamido)glucopyranose (MAG) and methacrylic acid (MAA) are synthesized by RAFT polymerization and then used as templates to prepare glycopolymer‐functionalized Ag nanoclusters (Gly‐Ag NCs) through microwave irradiation. Polymers and the resulting nanoclusters are characterized by NMR, GPC, UV‐Vis, SEM, TEM, AAS and fluorescence spectroscopy. The bio‐activity of the fluorescent Gly‐Ag NCs are further examined using GLUT‐1 over‐expressing cancer cells K562. Gly‐Ag NCs show efficient binding ability toward K562 cells and inhibit the cell viability in a dose dependent manner (IC50 = 0.65 μg mL–1), indicating their potential biological applications for both cancer imaging and targeted cancer therapy.
A facile and universal method is presented for the preparation of polymer brushes on amorphous TiO2 film. Homogeneous and stable poly(methyl methacrylate), polystyrene, poly(4‐vinylpyridine), and poly(N‐vinyl imidazole) (PNVI) brushes up to 550 nm are directly created onto TiO2 via UV‐induced photopolymerization of corresponding monomers. Kinetic studies reveal a linear increase in thickness with the polymerization time. Characterization of the resulting polymer brushes by FTIR spectroscopy, X‐ray photoelectron spectroscopy, contact angle, and atomic force microscopy (AFM) indicates an efficient UV‐grafting reaction. Finally, we have demonstrated the possibility in converting the PNVI brushes to poly(vinyl imidazolium bromide), i.e., poly(ionic liquid) brushes by polymer–analogous reactions.
Surface‐initiated photo‐induced copper‐mediated radical polymerization is employed to graft a wide range of polyacrylate brushes from silicon substrates at extremely low catalyst concentrations. This is the first time that the controlled nature of the reported process is demonstrated via block copolymer formation and re‐initiation experiments. In addition to unmatched copper catalyst concentrations in the range of few ppb, film thicknesses up to almost 1 μm are achieved within only 1 h.
Polymer‐protein conjugates are biohybrid macromolecules derived from covalently connecting synthetic polymers with polypeptides. The resulting materials combine the properties of both worlds: chemists can engineer polymers to stabilize proteins, to add functionality, or to enhance activity; whereas biochemists can exploit the specificity and complexity that Nature has bestowed upon its macromolecules. This has led to a wealth of applications, particularly within the realm of biomedicine. Polymer‐protein conjugation has expanded to include scaffolds for drug delivery, tissue engineering, and microbial inhibitors. This feature article reflects upon recent developments in the field and discusses the applications of these hybrids from a biomaterials standpoint.
Carbonaceous nanocomposite hydrogels are prepared with an aid of a suspension polymerization method and are used as anodes in microbial fuel cells (MFCs). (Poly N‐Isopropylacrylamide) (PNIPAM) hydrogels filled with electrically conductive carbonaceous nanomaterials exhibit significantly higher MFC efficiencies than the unfilled hydrogel. The observed morphological images clearly show the homogeneous dispersion of carbon nanotubes (CNTs) and graphene oxide (GO) in the PNIPAM matrix. The complex formation of CNTs and GO with NIPAM is evidenced from the structural characterizations. The effectual MFC performances are influenced by combining the materials of interest (GO and CNTs) and are attributed to the high surface area, number of active sites, and improved electron‐transfer processes. The obtained higher MFC efficiencies associated with an excellent durability of the prepared hydrogels open up new possibilities for MFC anode applications.
