Oligofunctional terpyridine‐based monomers are spread at an air/water interface, where they are connected with transition metal salts such as Fe(II) into mechanically coherent monolayer sheets of macroscopic dimension. The conversions of these processes are determined by XPS for several monomer/metal ion combinations. The sheets are transferred onto TEM grids, the 20 × 20 square micrometer sized holes of which can be spanned. AFM indentation experiments provide in‐plane elastic moduli which are compared with naturally occurring sheets such as graphene. The new organometallic sheets are also used to create multilayer assemblies on square centimeter length scales on solid substrates. Finally some directions are provided where this research can lead to in future and where its application potential lies.
Two soluble poly(phenyltriazolylcarboxylate)s (PPTCs) with high molecular weights (M w up to 26 800) are synthesized by the metal‐free 1,3‐dipolar polycycloadditions of 4,4′‐isopropylidenediphenyl diphenylpropiolate ( 1 ) and tetraphenylethene‐containing diazides ( 2 ) in dimethylformamide at 150 °C for 12 h in high yields (up to 93%). The resultant polymers are soluble in common organic solvents and are thermally stable with 5% weight loss temperatures higher than 375 °C. The PPTCs are nonemissive in solutions, but become highly luminescent upon aggregation, showing a phenomenon of aggregation‐induced emission. Their aggregates can be used as fluorescent chemosensors for high‐sensitivity detection of explosives.
Here, a novel method is demonstrated for the preparation of three‐arm branched microporous organic nanotube networks (TAB‐MONNs) based on molecular templating of three‐arm branched core–shell bottlebrush copolymers and Friedel–Crafts alkylation reaction. The unique three‐arm branched bottlebrush copolymers are synthesized by a combination of atom transfer radical polymerization, reversible addition‐fragmentation chain transfer polymerization, and ring‐opening polymerization techniques. In this approach, the length and diameter of branched tube units can be well‐controlled by rational molecular design. Moreover, the as‐prepared TAB‐MONNs possess a high surface area and exhibit a superior adsorption capacity for Rhodamine 6G (R6G) and p‐cresol.
Molecular bottle‐brush functionalized single‐walled carbon nanotubes (SWCNTs) with superior dispersibility in water are prepared by a one‐pot synthetic methodology. Elongating the main‐chain and side‐chain length of molecular bottle‐brushes can further increase SWCNT dispersibility. They show significant enhancement of SWCNT dispersibility up to four times higher than those of linear molecular functionalized SWCNTs.
Conjugation of a hydrophobic poly(2‐oxazoline) bearing tertiary amide groups along its backbone with a short single stranded nucleotide sequence results in an amphiphilic comb/graft copolymer, which organizes in fibrils upon direct dissolution in water. Supported by circular dichroism, atomic force microscopy, transmission electron microscopy, and scattering data, fibrils are formed through inter‐ and intramolecular hydrogen bonding between hydrogen accepting amide groups along the polymer backbone and hydrogen donating nucleic acid grafts leading to the formation of hollow tubes.
Pillararene‐containing thermoresponsive polymers are synthesized via reversible addition–fragmentation chain transfer polymerization using pillararene derivatives as the effective chain transfer agents for the first time. These polymers can self‐assemble into micelles and form vesicles after guest molecules are added. Furthermore, such functional polymers can be further applied to prepare hybrid gold nanoparticles, which integrate the thermoresponsivity of polymers and molecular recognition of pillararenes.
Electrohydrodynamic cojetting has been employed to synthesize compartmentalized microfibers from thermally responsive hydrogels. The synthesis of the hydrogels as well as their transformation into compartmentalized microcylinders is discussed. After programmable shape‐shifting, snail‐like particles are obtained that undergo functional and structural reconfiguration in response to a change in temperature.
Synthesis of a cyclodextrin (CD) polyrotaxane is achieved for the first time by simultaneous free radical polymerization of isoprene, threading by CD, and stoppering by copolymerization of styrene. This reaction is performed in an eco‐friendly manner in an aqueous medium similar to classical emulsion polymerization. Threaded CD rings of the polyrotaxane are cross‐linked by hexamethylene diisocyanate, leading to highly elastic slide‐ring gels.
Endowing unimolecular soft nanoobjects with biomimetic functions is attracting significant interest in the emerging field of single‐chain technology. Inspired by the compartmentalized structure and polymerase activity of metalloenzymes, copper‐containing compact nanoglobules have been designed, synthesized, and characterized endowed with metalloenzyme mimicking characteristics toward controlled synthesis of water‐soluble polymers and thermoresponsive hydrogels. When compared to metalloenzymes, artificial nanoobjects endowed with metalloenzyme mimicking characteristics offer increased stability against thermal changes and reduced degradability by hydrolytic enzymes.
Low‐molecular‐weight poly(ethylene glycol) (PEG) is deliberately incorporated into synthesized swellable poly(ethylene oxide) (PEO) membranes via a facile post‐treatment strategy. The membranes exhibit both larger fractional free volume (FFV) and a higher content of CO2‐philic building units, resulting in significant increments in both CO2 permeability and CO2/H2 selectivity. The separation performance correlates nicely with the microstructure of the membranes. This study may provide useful insights in the formation and mass transport behavior of highly efficient polymeric membranes applicable to clean energy purification and CO2 capture, and possibly bridge the material‐induced technology gap between academia and industry.
Flexible, tough, and self‐healable polymeric materials are promising to be a solution to the energy problem by substituting for conventional heavy materials. A fusion of supramolecular chemistry and polymer chemistry is a powerful method to create such intelligent materials. Here, a supramolecular polymeric material using multipoint molecular recognition between cyclodextrin (CD) and hydrophobic guest molecules at polymer side chain is reported. A transparent, flexible, and tough hydrogel (host–guest gel) is formed by a simple preparation procedure. The host–guest gel shows self‐healing property in both wet state and dry state due to reversible nature of host–guest interaction. The practical utility of the host–guest gel as a scratch curable coating is demonstrated.
The CO2‐responsive and biocatalytic assembly based on conjugated polymers has been demonstrated by combining the signal amplification property of the polythiophene derivative (PTP) and the catalytic actions of carbonic anhydrase (CA). CO2 is applied as a new trigger mode to construct the smart assembly by controlling the electrostatic and hydrophobic interactions between the PTP molecules in aqueous solution, leading to the visible fluorescence changes. Importantly, the assembly transformation of PTP can be specifically and highly accelerated by CA based on the efficient catalytic activity of CA for the inter‐conversion between CO2 and HCO3−, mimicking the CO2‐associated biological processes that occurred naturally in living organisms. Moreover, the PTP‐based assembly can be applied for biomimetic CO2 sequestration with fluorescence monitoring in the presence of CA and calcium.
Improving thermal stability of TEMPO‐oxidized cellulose nanofibrils (TOCNs) is a major challenge for the development and preparation of new nanocomposites. However, thermal degradation of TOCNs occurs at 220 °C. The present study reports a simple way to improve thermal stability of TOCNs by the heat‐induced conversion of ionic bonds to amide bonds. Coupling amine‐terminated polyethylene glycol to the TOCNs is performed through ionic bond formation. Films are produced from the dispersions by the casting method. Infrared spectroscopy and thermogravimetric analysis confirm conversion of ionic bonds to amide bonds for the modified TOCN samples after heating. As a result, improvement of TOCNs' thermal stability by up to 90 °C is successfully achieved.
The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.
A new and easy method of stimuli‐triggered growth and removal of a bioreducible nanoshell on nanoparticles is reported. The results show that pH or temperature could induce the aggregation of disulfide‐contained branched polymers at the surface of nanoparticles; subsequently, the aggregated polymers could undergo intermolecular disulfide exchange to cross‐link the aggregated polymers, forming a bioreducible polymer shell around nanoparticles. When these nanoparticles with a polymer shell are treated with glutathione (GSH) or d,l ‐dithiothreitol (DTT), the polymer shell could be easily removed from the nanoparticles. The potential application of this method is demonstrated by easily growing and removing a bioreducible shell from liposomes, and improvement of in vivo gene transfection activity of liposomes with a bioreducible PEG shell.
Micromolding surface‐initiated polymerization enables the fabrication of polymer coatings that reproduce the microscale surface topography of superhydrophobic leaves onto solid supports. Here, the surfaces of superhydrophobic leaves from Trifolium repens and Aristolochia esperanzae are molded and reproduced as the topography of a partially fluorinated polymer coating through the surface‐initiated ring‐opening metathesis polymerization of 5‐(perfluorooctyl)norbornene (NBF8). The polymer coatings have thicknesses exceeding 100 μm, which can be tailored by the amount of monomer added to the mold. These coatings are robustly bound to the substrate, contain compositions not found in nature, and achieve superhydrophobicity that is comparable to the actual leaf.
A surfactant‐free emulsion‐based approach is developed for preparation of nanogels. A water‐in‐oil emulsion is generated feasibly from a mixture of water and a solution of disulfide‐containing hyperbranched PEGylated poly(amido amine)s, poly(BAC2‐AMPD1)‐PEG, in chloroform. The water droplets in the emulsion are stabilized and filled with poly(BAC2‐AMPD1)‐PEG, and the crosslinked poly(amido amine)s nanogels are formed via the intermolecular disulfide exchange reaction. FITC‐dextran is loaded within the nanogels by dissolving the compound in water before emulsification. Transmission electron microscopy and dynamic light scattering are applied to characterize the emulsion and the nanogels. The effects of the homogenization rate and the ratio of water/polymer are investigated. Redox‐induced degradation and FITC‐dextran release profile of the nanogels are monitored, and the results show efficient loading and redox‐responsive release of FITC‐dextran. This is a promising approach for the preparation of nanogels for drug delivery, especially for neutral charged carbohydrate‐based drugs.
Here, a novel multi‐stimuli‐responsive fluorescence probe is developed by incorporating spiropyran group into the coumarin‐substituted polydiacetylene (PDA) vesicles. The fluorescence of PDA can be turned on upon heating, and can be quenched upon exposure to UV light irradiation or pH stimuli owing to the fluorescene resonance energy transfer (FRET) between the red‐phase PDA and the open merocyanine (MC) form of spiropyran. Moreover, we have designed and experimentally realized a set of logic gate operations for the first time based on the fluorescence modulation of the designed system upon thermal, photo, and pH stimuli. This novel type of resettable logic gates augur well for practical applications in information storage, optical recording, and sensing in complicated microenvironments.
Hierarchical semicrystalline block copolymer nanoparticles are produced in a segmented gas‐liquid microfluidic reactor with top‐down control of multiscale structural features, including nanoparticle morphologies, sizes, and internal crystallinities. Control of multiscale structure on disparate length scales by a single control variable (flow rate) enables tailoring of drug delivery nanoparticle function including release rates.
Silicone elastomers are promising materials for dielectric elastomer transducers (DETs) due to their superior properties such as high efficiency, reliability and fast response times. DETs consist of thin elastomer films sandwiched between compliant electrodes, and they constitute an interesting class of transducer due to their inherent lightweight and potentially large strains. For the field to progress towards industrial implementation, a leap in material development is required, specifically targeting longer lifetime and higher energy densities to provide more efficient transduction at lower driving voltages. In this review, the current state of silicone elastomers for DETs is summarised and critically discussed, including commercial elastomers, composites, polymer blends, grafted elastomers and complex network structures. For future developments in the field it is essential that all aspects of the elastomer are taken into account, namely dielectric losses, lifetime and the very often ignored polymer network integrity and stability.
