Sequence Control in Polymer Chemistry through the Passerini Three‐Component Reaction

A new strategy to achieve sequence control in polymer chemistry based on the iterative application of the versatile Passerini three‐component reaction (P‐3CR) in combination with efficient thiol–ene addition reactions is introduced. First, stearic acid was used as a starting substrate to build up a sequence‐defined tetramer with a molecular weight of 1.6 kDa. Using an acid‐functionalized PEG allowed for an easier isolation of the sequence‐defined macromolecules by simple precipitation and led to a sequence‐defined pentamer in a block‐copolymer architecture. Importantly, this new strategy completely avoids protecting group chemistry. By following this strategy, a different side chain can be introduced to the polymer/oligomer backbone in a simple way and at a defined position within the macromolecule.     

Dendron–polymer conjugates via the diels–alder “click” reaction of novel anthracene‐based dendrons

Diblock and triblock dendron–polymer conjugates containing biodegradable polyester dendron blocks and polyethylene glycol (PEG) polymer were synthesized using the Diels–Alder “click” cycloaddition reaction. PEG polymers with furan‐protected maleimide functionality were synthesized and reacted with biodegradable polyester dendrons containing an anthracene moiety at their focal point. First through third generations of biodegradable polyester dendrons containing an anthracene unit at their focal point were synthesized using a divergent strategy. Efficient conjugation of the dendrons to polymers was demonstrated using ¹HNMR and size exclusion chromatography. This modular approach provides an easy access to the design of multivalent PEG conjugates. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3191–3201     

Cyclic homo and block copolymers through sequential double click reactions

Well‐defined linear α‐anthracene‐ω‐maleimide functionalized polystyrene (l‐Anth‐PS‐MI) and linear α‐alkyne‐ω‐maleimide functionalized poly(tert‐butyl acrylate) (l‐alkyne‐PtBA‐MI) homopolymers, and linear α‐anthracene‐ω‐maleimide functionalized PS‐b‐PtBA (l‐Anth‐PS‐b‐PtBA‐MI) and linear α‐anthracene‐ω‐maleimide functionalized PS‐b‐poly(ε‐caprolactone) (PCL) (l‐Anth‐PS‐b‐PCL‐MI) block copolymers were obtained via combination of atom transfer radical polymerization (ATRP)/ring opening polymerization (ROP) and azide‐alkyne click reaction strategy. Subsequently, these linear homo and block copolymers were efficiently clicked via Diels‐Alder reaction to give their corresponding cyclic homo and block copolymers at reflux temperature of toluene for 48 h under 7–4 × 10^?5 M conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of chalcone‐based fluorescent polymers: Diels‐Alder reaction of chalcones and their polymerization through ROMP

Ring opening metathesis polymerization (ROMP) was carried out on Diels‐Alder adducts formed from reactions between chalcones and cyclopentadiene. Most of the chalcones gave predominantly endo‐adducts and the exo‐adducts were obtained in good yields from reacting cyclopentadiene with furfurylidine acetone and N,N,diethylaminobenzylidine‐(4‐hydroxy)acetophenone. These exo‐adducts were subjected to ROMP using Grubbs catalyst, bis(tricyclohexylphosphine)benzylidinedichloride. The monomers and polymers were characterized using spectroscopic techniques like FT‐IR, ¹HNMR. The polymers were characterized using TGA, DSC, and GPC. The polymers were found to possess fluorescent properties and poly[2‐(4‐diethylamino)phenyl‐3,5‐divinylcyclopentyl](4‐hydroxyphenyl) methanone was found to have good emissive property at two wavelengths. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1521–1531, 2008     

Diels–Alder modification of poly(ethylene terephthalate‐co‐anthracene‐2,6‐carboxylate) with N‐substituted maleimides

Dimethyl 2,6‐anthracene dicarboxylate is used as a comonomer in the synthesis of functional copolymers that are subject to modification with Diels–Alder reactions. The formation of poly(ethylene terephthalate‐co‐2,6‐anthracenate), containing less than 20 mol % of the anthracene‐2,6‐dicarboxylate structural units, provides materials that are tractable and soluble. The anthracene units of the copolymers undergo Diels–Alder reactions with N‐substituted maleimides. The grafting of N‐alkylmaleimides affords soluble, hydrophobic polymers, whereas grafting with maleimide‐terminated poly(ethylene glycol) affords hydrophilic polymers. Because this reaction proceeds below the melting point of the copolymers, the procedure can be applied to thin films, whereby the surface properties are modified. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3256–3263, 2002     

Ring‐Opening of Benzocyclobutenol with Mild Bases and Trapping with Dieneophiles

The treatment of benzocyclobutenol with a mild base has been investigated. This reaction results in an electrocyclic opening of the cyclobutene to the corresponding o‐quinodimethane, which has been successfully treated with aldehydes and electron‐deficient alkenes to form benzolactols and benzocyclohexenes respectively.     

Alternating Diene Metathesis Polycondensation (ALTMET) – A Versatile Tool for the Preparation of Perfectly Alternating AB Copolymers

Perfectly alternating copolymers can be synthesised by reacting diacrylates with terminal dienes using alternating diene metathesis polycondensation (ALTMET). This novel method is very versatile and allows preparation of diverse structures of polymers, including main‐chain liquid crystalline polymers.

Main‐chain liquid crystalline polymer obtained by ALTMET.     

Synthesis,Thermal Properties,and Thermoresponsive Behaviors of Cyclic Poly(2‐(dimethylamino)ethyl Methacrylate)s

This study aims at physicochemical properties of thermo‐ and pH/CO₂‐responsive cyclic homopolymers. Three examples of cyclic poly(2‐(dimethylamino)ethyl methacrylate)s (PDMAs) are synthesized by combining the reversible addition–fragmentation chain transfer process and the Diels–Alder ring‐closure reaction. After cyclization, the glass transition temperature significantly increases (ΔT_g = 51.8–59.7 °C) due to the different configurational entropy and end groups, and the maximum decomposition temperature to lose the pendent groups is drastically decreased from 309 to 278 °C. Effects of polymerization degree, polymer concentration, additive of NaCl, and pH/CO₂ on lower critical solution temperature behaviors of PDMA aqueous solutions are investigated. The cloud points (T_c) of ring PDMAs are usually higher than their linear precursors, and the ΔT_c values obtained under a fixed condition can reach up to 20.7 °C, revealing the crucial role of the topology effect. This study paves the way for unique properties and applications of smart cyclic polymers and their derivatives.

     

Ultrathin Alternating Copolymer Nanotubes with Readily Tunable Surface Functionalities

Well‐defined ultrathin nanotubes (30 nm in diameter and of micrometer‐scale length) were generated through the self‐assembly of a novel alternative copolymer synthesized using an epoxy–thiol click‐chemistry reaction. The self‐assembly mechanism was investigated both by experiments and using dissipative particle dynamics (DPD) simulations. The obtained nanotubes can be readily functionalized with carboxy groups, amino groups, peptides, or other groups by simple modular click copolymerization.     

Stereoselective Synthesis of 2,6‐Disubstituted Tetrahydropyridines Via Aza‐Diels‐Alder Reactions

Abstract

The aza‐Diels‐Alder reactions of (E)‐2‐(phenylthio)‐1,3‐pentadiene (2) with iminium salts gave the 2,6‐disubstituted tetrahydropyridines 3–8. Factors influencing the stereochemistry and reactivity of these reactions were also studied.     

Initiated Chemical Vapor Deposition of Poly(furfuryl methacrylate)

Furan ring‐functionalized solid surfaces are achieved by the initiated chemical vapor deposition (iCVD) method, a solvent‐free process to form films under mild conditions. The polymerization of furfuryl methacrylate monomer is initiated by a resistively heated filament wire. The functionality of the furan group in the iCVD film enabled Diels–Alder chemistry with 4‐phenyl‐1,2,3‐triazolin‐3,5‐dione (N‐PTD).

     

Novel Nucleophilic Substitution Reactions of 5‐Halo‐4‐Sulfur‐Substituted 5,6‐Dihydro‐2‐Pyridones

The title compounds ( 3 , 8 , 9 and 10 ) were efficiently synthesized, and their substitution reactions with various nucleophiles were carried out. The effects of leaving group, sulfur‐substituent, solvent, reaction temperature, and the nature of the nucleophiles on the reactivity and S_N2/S_N2′ regioselectivity were studied and rationalized with semi‐empirical calculations.     

A Defect‐Free Ring Polymer: Size‐Controlled Cyclic Poly(tetrahydrofuran) Consisting Exclusively of the Monomer Unit

A series of size‐controlled, cyclic poly(tetrahydrofuran)s ( of 4 400–8 600) that consist exclusively of the monomer, i.e., oxytetramethylene, unit ( I ) have been prepared in high yield through the metathesis polymer cyclization of a telechelic precursor having allyl groups, 1 , in the presence of a Grubbs catalyst, and the subsequent hydrogenation of the linking, i.e., 2‐butenoxy, unit in the presence of an Adams' catalyst (PtO₂). A remarkable topology effect has subsequently been observed upon the isothermal crystallization of these two model polymers, showing distinctive spherulite growth rates and spherulite morphologies in comparison with the relevant linear poly(tetrahydrofuran) counterpart that has ethoxy end groups ( II ).

     

Benzoannulation of Quinones by a Cycloaddition‐Fragmentation Approach. A Simple Synthesis of Methoxycarbonyl‐Substituted Polyacenoquinones

The cycloadducts 2A‐5A obtained from the Diels‐Alder cycloadditions of 1,2,3,4‐tetrachloro‐4,5‐dimethoxycyclopentadiene ( 1 ) with p‐benzoquinone ( 2 ), 1,4‐naphthoquinone ( 3 ), 1,4‐anthraquinone ( 4 ), and 2,3‐dicyano‐1,4‐benzoquinone ( 5 ) were subjected to the reaction with triethylamine in dichloromethane at room temperature. Cycloadducts 2A and 5A enolized to give the corresponding hydroquinones 2B and 5B , which were oxidized with DDQ to afford naphthoquinone ester 2D and anthraquinone ester 5D , respectively. In the cases of cycloadducts 3A and 4A , the enolization occurred concurrently with oxidation and fragmentation to produce directly the polyacenoquinone esters 3D and 4D , respectively. Under the same reaction condition, the unsymmetrical cycloadduct 6A derived from naphthoquinone ester 2D and 1 yielded isomeric polyacenoquinone esters 6Da and 6Db in a ratio of about 8:1.     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole: Synthesis,characterization and photovoltaic properties

A series of alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole (BT), PV‐BT, DP‐BT, and TP‐BT, were synthesized by Heck coupling reaction. UV–vis absorption and fluorescence spectra show that the copolymerization of electron‐rich diphenylamine (DP), triphenylamine (TP), MEH‐PV (PV), and electron‐deficient BT results in low‐bandgap conjugated polymers. Within the three copolymers of PV‐BT, DP‐BT, and TP‐BT, TP‐BT possesses the highest hole mobility of 4.68 × 10^{? 5} cm²/V, as determined from the space charge limited current (SCLC) model. The bulk heterojunction‐typed polymer solar cells (PSCs) were fabricated with the blend of the copolymers and PCBM as the photosensitive layer. The power conversion efficiencies (PCE) of the PSCs based on PV‐BT, DP‐BT, and TP‐BT reached 0.26%, 0.39%, and 0.52%, respectively, under the illumination of AM 1.5, 100 mW/cm². The results indicate that TP‐BT is a promising photovoltaic polymer for PSCs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3861–3871, 2007     

Mechanical property tuning of semicrystalline network polymers by controlling rates of crystallization and crosslinking

Semicrystalline network polymers were obtained by the Diels–Alder (DA) reaction of furyl‐telechelic poly(ε‐caprolactone) and tris(2‐maleimide ethyl)amine. Controlling the rates of crystallization and crosslinking reaction gave materials with various properties. Curing at a temperature much below T_m of poly(ε‐caprolactone), at which crystallization proceeded first followed by DA reaction, gave a hard and stiff material, whereas curing above T_m gave a soft and stretchable one. When crystallization and crosslinking were promoted simultaneously, tough and ductile materials were obtained. Structural analysis of the network polymers showed that the variation in the properties was derived from the difference in the crystallinity, crystallite size, and network structure. Therefore, materials with various mechanical properties, from soft to hard, could be obtained by simple thermal treatment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthetic Transformations of Sulfur‐Substituted 4‐Quinolizidinones

Sulfur‐substituted 4‐quinolizidinones, previously prepared by aza‐Diels‐Alder reactions and ring‐closing metathesis, are now subjected to further synthetic transformations. Formal synthesis of cermizine C and 5‐epi‐cermizine C, and some other useful reactions have been achieved.     

Hydrogel synthesis by aqueous Diels‐Alder reaction between furan modified methacrylate and polyetheramine‐based bismaleimides

A simple method for preparing cross‐linked hydrogels in an aqueous medium is investigated using Diels‐Alder (DA) “click” reaction, without employing a catalyst. A polymeric diene is first synthesized by the functionalization of poly(2‐aminoethyl methacrylate) hydrochloride with furfural. Suited bisdienophiles are prepared by modification of Jeffamine^® ED of different molecular weights with maleic anhydride. Both precursors of the DA coupling are thoroughly characterized before their reactions. The ensuing hydrogels are analyzed in terms of their microstructure, swelling, and rheological behavior, as a function of the reaction conditions. The influence of the molecular weight of the cross‐linker and the furan‐to‐maleimide ratio on the final properties of the hydrogels were also investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 699–708     

Unprecedented Sequence Control and Sequence‐Driven Properties in a Series of AB‐Alternating Copolymers Consisting Solely of Acrylamide Units

Herein, we report a method to synthesize a series of alternating copolymers that consist exclusively of acrylamide units. Crucial to realizing this polymer synthesis is the design of a divinyl monomer that contains acrylate and acrylamide moieties connected by two activated ester bonds. This design, which is based on the reactivity ratio of the embedded vinyl groups, allows a “selective” cyclopolymerization, wherein the intramolecular and intermolecular propagation are repeated alternately under dilute conditions. The addition of an amine to the resulting cyclopolymers afforded two different acryl amide units, i.e., an amine‐substituted acryl amide and a 2‐hydroxy‐ethyl‐substituted acryl amide in alternating sequence. Using this method, we could furnish ten types of alternating copolymers; some of these exhibit unique properties in solution and in the bulk, which are different from those of the corresponding random copolymers, and we attributed the differences to the alternating sequence.