Determination of 21 elements by INAA for certification of SRM 1570a,Spinach

Analyses for certification have been made by instrumental neutron activation analysis (INAA) for the determination of 21 elements in the National Institute of Standards and Technology (NIST) Spinach renewal reference material, SRM 1570a. Elements determined included ones with short halflife products (Al, V, Ca, Mg), intermediate halflife products (Mn, Na, K, La), and long halflife products (Ba, Co, Cr, Cs, Eu, Fe, Rb, Sb, Sc, Se, Sr, Th, and Zn). For the first time a new robotic sample changer was used in the counting of long halflife indicator isotopes for certification of an SRM. Uncertainties obtained averaged±1.80% for the four major and minor constituents (Ca, K, Mg, Na); ±3.14% for elements with concentrations from 1 to 400 mg/kg (Al, Ba, Cr, Fe, Mn, Rb, Sr, and Zn); and±8.31% for the ultra trace elements (<1 mg/kg) (Co, Cs, Eu, La, Sb, Sc, Se, Th, and V).     

Determination of impurities in nuclear fuel element components by neutron activation analysis

Neutron activation analysis methods for the determination of impurities in zirconium cladding material and uranium oxide are described. Detection limits for the elements Al, Cd, Cr, Co, Cu, Hf, Fe, Mn, Ni, W and U in zirconium are below that required by the ASTM B 352-79 standard. The method has been tested on the NIST SRM 360a Zircaloy-2 from which the elements Na, Mg, Al, Ca, V, Cr, Fe, Co, Ni, Cu, Eu and U have been detected. The values for Cr, Fe, Ni and Cu are compared with the certified values. A method for the pre-irradiation separation of the elements Mg, Na, Al, K, Sc, Ca, V, Mn, Cr, Fe, Co, Cu, Zn, Rb, Zr, Cd, Cs, REE and Hf from uranium has been developed. A neutron activation analysis method for the determination of those elements in uranium is described. The method is tested by the analysis of the IAEA reference sample SR-54/64. The elements Al, Mn, V, Cu, Cr, Co, Ni and Fe have been detected and the results compared with the certified values.     

Determination of elements in SRM soil 2709a by neutron activation analysis

A combination of instrumental neutron activation analysis (INAA) and prompt gamma-ray activation analysis (PGAA) was used to value assign 35 elements in SRM soil 2709a (San Joaquin Soil). INAA with counting of short-lived radioisotopes was used for determination of Al, Au, Ca, Dy, K, Mg, Mn, Na, Ti, and V. Elements determined by INAA with counting of intermediate and long-lived radioisotopes included As, Ba, Ce, Co, Cr, Cs, Eu, Fe, Hf, La, Lu, Nd, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Yb, Zn, and Zr. Thermal neutron PGAA was used for the determination of H, B, Si, K, Ti, Mn, Fe, Cd and Gd. Expanded uncertainties were determined for all values reported.     

Instrumental neutron activation analysis of brewer's yeast

Instrumental neutron activation was used for the determination of 23 trace and minor elements in 4 different samples of brewer's yeast. Detection limits for these elements vary from 2 ppb to 100 ppm. The following average concentrations were found (ppm, dry weight): Al 597, Br 0.36, Cl 1473, Co 0.21, Cu 19, Fe 285, K 16 400, Mg 1355, Mn 8.4, Na 2330, Rb 19, Sb 0.053, Se 1.2, V 2.2 and Zn 80. NBS standard 1569 was also analyzed and the following concentrations (in ppm) were measured: Al 2300, Br 0.65, Ce 0.23, Cl 460, Co 0.26, Cr 2.12, Cu 11, Fe 707, Gd 7.1, Hf 0.13, K 15 500, Mg 1780, Mn 7, Na 510, Rb 16, Sb 0.075, Sc 0.18, Se 0.92, Th 3.7, Ti 38, U 0.49, V 4.1 and Zn 70.     

Assessment of metal contamination in an urban drainage system (using water and tilapia, Oreochromis spp.) in view of human health effect. A case study of some selected communities in Cape Coast township in Ghana

This research work aimed at studying the metal content of water and tilapia fish sample, Oreochromis spp., from a wastewater-fed pond around the University of Cape Coast community using instrumental neutron activation analysis. The metals studied were Al, As, Ca, Co, Cr, Cu, Fe, K, Mg, Mn, Na, V and Zn. In the water samples the order of elemental concentrations at sampling point 1, in ??g/g, was K (75.96?±?0.92), Na (18.52?±?0.35), Al (6.00?±?0.89), Mn (3.28?±?0.44), As (3.08?±?0.40), Mg (1.56?±?0.17), Ca (0.70?±?0.08), Cu (0.54?±?0.08) and V (0.04?±?0.01). Co, Cr, Fe and Zn were below detection limits of INAA. The order of elemental concentrations in the water at point 2 was as follows: Na (4.99?±?0.14), K (4.82?±?0.89), Mn (4.40?±?0.53), Mg (2.92?±?0.37), Al (1.98?±?0.21), As (0.69?±?0.10), Ca (0.24?±?0.07) and V (0.23?±?0.06) with Co, Cr, Cu, Fe and Zn falling below the detection limit of INAA. The concentrations recorded for Al, As, Cu and Mn in the water samples were all above WHO permissible limits. The mean levels of heavy metals in the soft tissue of tilapia was of the order: K?>?Mg?>?Fe?>?Ca?>?Na?>?Al?>?Mn?>?Zn?>?V?>?Cu?>?Cr?>?Co. Arsenic was below detection limit. The transfer factor values calculated for the metals Al, Ca, K, Mg, Mn, Na and V were all greater than one indicating movement of metals from the water column to the tilapia species. The hazard index (HI) calculated for Al, Fe, Mn and V suggested possible occurrence of adverse health effects (HI?>?1) where as the HI value obtained for Cr, Cu and Zn (i.e., HI?<?1) suggested unlikely adverse effects occurring.     

Determination of trace elements in Egyptian cane sugar (Deshna Factories) by neutron activation,atomic absorption spectrophotometric and inductively coupled plasma-atomic emission spectrometric analysis

Multielemental instrumental neutron activation (INAA), inductively coupled plasmaatomic emission spectrometric (ICP-AES) and atomic absorption spectrophotometric (AAS) analyses are utilized for the determination of Ag, Al, As, Au, Ba, Be, Br, Ca, Cd, Ce, Cl, Co, Cr, Cu, Eu, Fe, Ga, Hf, K, La, Li, Lu, Mg, Mn, Na, Nb, Ni, P. Pb, Sb, Sc, Se, Sm, Sn, Sr, Ta, Th, Ti, U, V, W and Zn in sugar cane plant, raw juice, juice in different stages, syrup, deposits, molasses, A, B and C sugar, refinery 1 and 2 sugar, and in soil samples picked up from the immediate vicinity of the cane plant roots at surface, 30 and 60 cm depth.     

Determination of trace elements in fish by instrumental neutron activation analysis

Instrumental neutron activation analysis, INAA, was utilized for the determination of Al, Au, Br, Ca, Cl, Co, Cr, Cu, Fe, I, K, Mg, Mn, Na, Rb, Sc, V and W in 12 Tilapia Nilotica samples collected from the Aswan High Dam Lake following the destructive techniques.     

Comparative PGAA and NAA results of geological samples and standards

Concentrations of major and trace elements in volcanic rock and soil samples, including geological standard reference materials, were determined by neutron activation analysis (NAA) and prompt gamma activation analysis (PGAA), both using the k ₀-standardization method. The paper highlights the different experimental procedures, such as sample preparation, data collection and spectrum evaluation. In geological samples, PGAA gives precise results for major elements (Si, Ti, Al, Fe, Mn, Mg, Ca, Na, K and—as a unique method—for H), for some of the light trace elements as B and Cl, as well as for Sc, S, Cr, Co, Ni, Cd, Nd, Sm and Gd. NAA is sensitive for the rare earth elements, and for many major (Ti, Al, Fe, Mn, Mg, Ca, Na, K) and trace elements (e.g.: Sc, V, Cr, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Zr, As, Sb, Ce, Ba, Hf, Ta, W). For most major elements the results obtained by the two methods show good agreement. The comparison of the results obtained for trace elements is not always possible, since PGAA is less sensitive and concentrations are often below its detection limits. Nevertheless, the complementarity of NAA and PGAA allows nearly panoramic analysis of geological materials.     

Determination of trace elements in atmospheric wet precipitation by instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) methods have been developed for the simultaneous determination of multielement concentrations in both particulate and soluble fractions of atmospheric wet precipitation (AWP). Samples of AWP collected across Canada by Canadian Network for Sampling Precipitation (CANSAP) have been analyzed. The INAA method involves four sequential irradiations and counting after five different decay periods for measuring Ag, Al, As, Au, Ba, Br, Ca, Ce, Cl, Co, Cr, Cu, Dy, Fe, Hf, Hg, I, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Sm, Sr, Ti V and Zn. Precision and accuracy of the INAA methods have been evaluated, and detection limits have been calculated.     

Evaluation of strontium isotope abundance ratios in combination with multi-elemental analysis as a possible tool to study the geographical origin of ciders

In order to evaluate alternative analytical methodologies to study the geographical origin of ciders, both multi-elemental analysis and Sr isotope abundance ratios in combination with multivariate statistical analysis were estimated in 67 samples from England, Switzerland, France and two Spanish regions (Asturias and the Basque Country). A methodology for the precise and accurate determination of the ⁸⁷Sr/⁸⁶Sr isotope abundance ratio in ciders by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) was developed. Major elements (Na, K, Ca and Mg) were measured by ICP-AES and minor and trace elements (Li, Be, B, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Y, Mo, Cd, Sn, Sb, Cs, Ba, La, Ce, W, Tl, Pb, Bi, Th and U) were measured by ICP-MS using a collision cell instrument operated in multitune mode. An analysis of variance (ANOVA test) indicated that group means for B, Cr, Fe, Ni, Cu, Se, Cd, Cs, Ce, W, Pb, Bi and U did not show any significant differences at the 95% confidence level, so these elements were rejected for further statistical analysis. Another group of elements (Li, Be, Sc, Co, Ga, Y, Sn, Sb, La, Tl, Th) was removed from the data set because concentrations were close to the limits of detection for many samples. Therefore, the remaining elements (Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba) together with ⁸⁷Sr/⁸⁶Sr isotope abundance ratio were considered for principal component analysis (PCA) and linear discriminant analysis (LDA). Finally, LDA was able to classify correctly 100% of cider samples coming from different Spanish regions, France, England and Switzerland when considering Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba and ⁸⁷Sr/⁸⁶Sr isotope abundance ratio as original variables.     

Neutron activation analysis of an Egyptian cigarette and its ash

The concentration of 28 elements in tobacco and cigarette paper in an Egyptian Cigarette were determined using instrumental neutron activation analysis. These elements are: Al, As, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, Hf, K, La, Mg, Mn, Na, Ni, Rb, Sb, Sc, Se, Sr, Th, Ti, V and Zn. The cigarette filter (before and after normal smoking) and the produced ash were analyzed to determine the adsorption of the elements on the filter and their remains in ash. The material balance for the determined elements were calculated.     

Elemental content in ground and soluble/instant coffee

The concentration of thirty-four elements in twelve coffee brands has been measured using instrumental neutron activation analysis. The samples investigated included four brands of commercially available ground coffee and eight brands of soluble/instant coffee. The elements measured were Al, As, Ba, Ca, Ce, Co, Cr, Cs, Dy, Eu, Fe, Gd, Hf, K, La, Lu, Mg, Mn, Na, Rb, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, Ti, Tm, U, V, Yb and Zn. Twenty four elements were found to be below the detection limit in one or more samples. These elements were Ce, Cr, Fe, V, As, Eu, Ba, Dy, Gd, Hf, La, Lu, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, Ti, Yb, Tm, and U.     

Radioactivation analysis of hair a means of biological monitoring of the environment

With the aim of indicating environmental pollution effects by heavy metals on humans using hair, nondestructive activation analysis was applied to 382 normal Japanese hair samples (background level). Elemental contents of hair could be determined for Ag, Al, As, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, La, Mg, Mn, Na, S, Sb, Sc, Se, Sm, Ti, V and Zn. As these elements in hair have wide concentration ranges, the differences in concentrations distribution between groups (sex, age, permanent treatment and regional difference) are discussed. A method for hair sampling is presented.     

Findings of national proficiency test exercise for the determination of trace elements in edible mushroom reference material

This paper presents the results of the proficiency test exercise conducted in Pakistan for the determination of trace elements in mushroom reference material. Thirteen laboratories from different organizations of the country submitted trace elemental data on Al, As, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, Fe, Hg, K, Li, Mg, Mn, Na, P, Pb, Rb Sc, Si, Sm, Sr, Th, Zn. Results for Al, As, Br, Ca, Cd, Cl, Co, Cr, Cs, Cu, Fe, K, Mg, Mn, Na, Rb Sc, and Zn, in the mushroom material were reported by two or more participating laboratories and could be subjected to statistical evaluation. The original data of these trace elements was subjected to a computer program “Histo Version 2.1” provided by IAEA. The four outlier tests, i.e., Dixon, Grubbs, skewness and kurtosis were applied to the data sets. Consensus (overall) mean values, absolute standard deviation, relative standard deviation, standard error, median and range of values for these elements have been reported at a significance level of 0.05.     

A trace element study of commercial infant milk and cereal formulas

Three commercial infant milk formulas, one commercial infant cereal formula and one locally grown cereal used for infant feeding in Nigeria were analyzed for 17 trace elements, viz: Al, As, Br, Ca, Ce, Cl, Co, Cr, Fe, K, Mg, Mn, Na, Rb, Sb, Se and Zn. The commercial milk formulas contain adequate amounts of Ca, Cl, Co, Fe, K, Mg, Mn, Na and Zn, the locally grown cereal contains adequate amounts of Co, K, Mg, Mn and Zn and low in Ca, Cl, Fe and Na while the commercial cereal has adequate amounts of Ca, Cl, Co, K, Mg, Na and Zn. None of the samples analyzed was found to contain any elements up to threshold toxicity limits of concentrations.     

Excretion of biotrace elements using the multitracer technique in mice

A radioactive multitracer solution obtained from the nuclear reaction of selenium with 25 MeV/nucleon⁴⁰Ar ions was applied to the investigation of the trace elements behavior in feces and urine of mouse. The excretion rates of 23 elements, Na, K, Rb, Mg, Ca, Sr, Ga, As, Sc, V, Cr, Mn, Co, Fe, Zn, Y, Zr, Mo, Nb, Tc, Ru, Ag and In were simultaneously detected under strictly identical experimental conditions, in order to clarify the excretion behavior of the elements in mice. Fecal and urinary excretion rates of the elements in mice reached the highest value separately at 48 and 24 hours. The total excretion of Mo, Tc and Co within 96 hours were all larger, more than 60%. Accumulative excretion rates of Ca, Nb, Mg, Sr, V, Sc, Na, Cr, Fe, Ag, Mn and Zr were 60-30%. The total rates of Ru, K, As, Zn, Rb, Y, Ga and In were less than 30%, and low excretion. The main excretion pathway of Mo, Co, Mg, Fe and Ag was through urine, and Na, K, As and Rb were eliminated from the body also in urine. But fecal excretion of Tc, Nb, Sr, Y, Ru, and In were larger than urinary excretion, and Ca, Sc, Mn, Zr, Zn were eliminated from the body in feces.     

Radioanalytical methods for the non-destructive analysis of lunar samples

The elemental compositions of Apollo 11 and Apollo 12 lunar soil samples 10084,141 and 12070,83 and Apollo 12 rock fragment 12063,73 were determined by non-destructive radioanalytical methods. Main mineral fractions and glasses separated from these samples were analyzed as well. Instrumental neutron activation analysis (INAA) was used to determine Na, Mg, Al, Si, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zr, Cs, Ba La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, Lu, Hf, Ta, W, Ir, Au, Th and U. A method of delayed neutron counting was used for the determination of uranium, and non-dispersive radioisotopic X-ray fluorescence analysis was applied to the determination of Ti, Fe, Sr, Y and Zr.     

Determination of palladium and platinum by atomic absorption

Palladium and platinum are determined by atomic absorption after fire-assay concentration into a gold bead. The limit of determination is ~0.06 ppm in a 20-g sample. Serious depressive interelement interferences are removed by buffering the solutions with a mixture of cadmium and copper sulphates with cadmium and copper concentrations each at 0.5%. Substantial amounts of Ag, Al, Au, Bi, Ca, Co, Cr, Fe, Hg, K, La, Mg, Mn, Mo, Na, Ni, Pb, Te, Ti, V, Y, Zn, and the platinum metals do not interfere in the atomic-absorption determination.     

Elemental analysis of dust trapped in air conditioner filters for the assessment of Lahore city’s air quality

A study was undertaken to assess the air quality of Lahore by the elemental analysis of air conditioner (AC) filter dust samples collected from 15 different commercial sites. Samples were prepared using the Leeds Public Analyst Method and were analyzed using instrumental neutron activation analysis (INAA) for up to 31 elements. The elements Al, As, Ba, Ce, Co, Cr, Cs, Fe, Hf, K, La, Lu, Mn, Na, Nd, Rb, Sc, Sm, Sn, Ta, Th, Yb and Zn were detected in all 15 samples whereas the remaining elements have been detected in fewer samples; i.e. Mg, Sb and Tb were detected in 14 samples, Br and V in ten samples, U in nine samples and Ca and Ti in eight samples only. Al, Ca, Fe, K, Mg and Na were determined in all samples at percentage levels. The concentrations of most elements were found to lie around the mean values for the 15 samples studied and were not orders of magnitude different. However the concentrations of Ca, Mg, Sn and Zn were found to be more variable and were found to be dependant on activities such as construction, fruit and vegetable handling, tin plating and transport, respectively.     

57Fe Mössbauer spectroscopy of banded iron formations from eastern India

Samples of the mosses Hylocomium splendens and Pleurozium schreberi, collected in the summer of 1998, were used to study the atmospheric deposition of heavy metals and other toxic elements in the Chelyabinsk Region situated in the South Urals, one of the most heavily polluted industrial areas of the Russian Federation. Samples of natural soils were collected simultaneously with moss at the same 30 sites in order to investigate surface accumulation of heavy metals and to examine the correlation of elements in moss and soil samples in order to separate contributions from atmospheric deposition and from soil minerals. A total of 38 elements (Na, Mg, Al, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Rb, Sr, Zr, Mo, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Yb, Hf, Ta, W, Au, Th, U) in soil and 33 elements Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Br, Rb, Ag, Sb, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Au, Th, U) were determined by epithermal neutron activation analysis. The elements Cu, Cd and Pb (in moss samples only) were obtained by atomic absorption spectrometry. VARIMAX rotated principal component analysis was used to identify and characterize different pollution sources and to point out the most polluted areas.