Ruthenium carbene complexes bearing an anionic carboxylate chelated to a hemilabile ligand

A series of bidentate ruthenium-based NHC complexes with the general formula [(H(2)IMes)(kappa(2)-L-COO)ClRu=CHPh)], where L is either PAr(3), HNR(2), or ROR, were prepared from commercially available [(H(2)IMes)(PCy(3))Cl(2)Ru(CHPh)] (2) and the appropriate ligand. The catalytic activities of the complexes were evaluated in ring-closing metathesis reactions. The type of donor ligand has a major impact on both the initiation behavior and also the stability of the complexes. Upon addition of CuCl to the reaction mixture the initiation is improved for the phosphine or amine containing chelates. For the P,O-chelate, the fast initiation was followed by decomposition. In the case of the N,O-containing chelate, a stable catalytic system was achieved. Trapping experiments support that the nitrogen lone-pair reversibly coordinates CuCl during the reaction.     

Metathesis transformations of natural products: cross-metathesis of natural rubber and mandarin oil by Ru-alkylidene catalysts

This study reports on the degradation of natural rubber (NR) via crossmetathesis with mandarin oil and d-limonene, an abundant compound in essential oils; that were used as chain transfer agents (CTAs) and green solvents. Reactions were performed in the presence of the ruthenium-alkylidene catalysts (PCy?)?(Cl)?Ru=CHPh (I) and (1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) (PCy?)Cl?Ru=CHPh (II), respectively. Catalyst II bears an N-heterocyclic carbene ligand (NHC) bounded to the ruthenium atom, which has a strong basic character; therefore it is more active toward trisubstituted olefins in comparison with catalyst I. In both cases, isolated monoterpene-terminated isoprene oligomers were obtained as products of the cross-metathesis degradation of NR. In the presence of catalyst II molecular weight values around M(n) × 102 and yields of 80% were obtained; whereas with catalyst I, the molecular weights of products were about M(n) × 10? with yields ranging 70 to 74%. The composition and yield of NR degradation products were determined by GC/MS (EI) analysis and it was found that the oligomers obtained have primarily one vinyl group and one terpene-monocyclic group at the chain end, with isoprene units A(m) = 2, 3 y 4.     

A general method for preparation of metal carbenes via solution- and polymer-based approaches

A new general, synthetically simple, and safe method for the preparation of metal carbene complexes, which is based on diphenyl sulfonium salts as carbenoid precursors, has been developed, and its scope and applications were studied. In general, deprotonation of a sulfonium salt with a base results in a sulfur ylide, which, in turn, reacts with an appropriate metal precursor to give the corresponding metal carbene complex. Thus, starting from benzyldiphenylsulfonium salt, the complexes (PCX)Rh=CHPh (X = P, N) were prepared in quantitative yield. Syntheses of Grubbs' catalyst, (PCy(3))(2)Cl(2)Ru=CHPh, and of Werner's carbene, [Os(=CHPh)HCl(CO)(P(i)Pr(3))(2)], were achieved by this method. Novel trans-bisphosphine Rh and Ir carbenes, ((i)Pr(3)P)(2)(Cl)M=CHPh, which could not be prepared by other known methods, were synthesized by the sulfur ylide approach. The method is not limited to metal benzylidenes, as demonstrated by the preparation of the Ru vinyl-alkylidene, (PCy(3))(2)Cl(2)Ru=CH-CH=CH(2), methoxycarbonyl-alkylidene, (PCy(3))(2)Cl(2)Ru=CH(CO(2)Me), and alkylidene (PCy(3))(2)Cl(2)Ru=CH(CH(3)), (PCy(3))(2)Cl(2)Ru=CH(2) compounds. The problem of recycling of starting materials as well as the issue of facile purification of the product metal carbene complex were addressed by the synthesis of a polymer-supported diarylsulfide, the carrier of the carbenoid unit in the process. Based on the sulfur ylide route, a methodology for the synthesis of metallocarbenes anchored to a polymer via the carbene ligand, using a commercial Merrifield resin, was developed.     

Synthesis and activity of ruthenium alkylidene complexes coordinated with phosphine and N-heterocyclic carbene ligands

This paper reports the synthesis and characterization of a variety of ruthenium complexes coordinated with phosphine and N-heterocyclic carbene (NHC) ligands. These complexes include several alkylidene derivatives of the general formula (NHC)(PR(3))(Cl)(2)Ru=CHR', which are highly active olefin metathesis catalysts. Although these catalysts can be prepared adequately by the reaction of bis(phosphine) ruthenium alkylidene precursors with free NHCs, we have developed an alternative route that employs NHC-alcohol or -chloroform adducts as "protected" forms of the NHC ligands. This route is advantageous because NHC adducts are easier to handle than their free carbene counterparts. We also demonstrate that sterically bulky bis(NHC) complexes can be made by reaction of the pyridine-coordinated precursor (NHC)(py)(2)(Cl)(2)Ru=CHPh with free NHCs or NHC adducts. Two crystal structures are presented, one of the mixed bis(NHC) derivative (H(2)IMes)(IMes)(Cl)(2)Ru=CHPh, and the other of (PCy(3))(Cl)(CO)Ru[eta(2)-(CH(2)-C(6)H(2)Me(2))(N(2)C(3)H(4))(C(6)H(2)Me(3))], the product of ortho methyl C-H bond activation. Other side reactions encountered during the synthesis of new ruthenium alkylidene complexes include the formation of hydrido-carbonyl-chloride derivatives in the presence of primary alcohols and the deprotonation of ruthenium vinylcarbene ligands by KOBu(t). We also evaluate the olefin metathesis activity of NHC-coordinated complexes in representative RCM and ROMP reactions.     

Mechanism and activity of ruthenium olefin metathesis catalysts: the role of ligands and substrates from a theoretical perspective

The reaction mechanism of olefin metathesis by ruthenium carbene catalysts is studied by gradient-corrected density functional calculations (BP86). Alternative reaction mechanisms for the reaction of the "first-generation" Grubbs-type catalyst (PCy(3))(2)Cl(2)Ru=CH(2) (1) for the reaction with ethylene are studied. The most likely dissociative mechanism with trans olefin coordination is investigated for the metathesis reaction between the "first-" and the "second-generation" Grubbs-type catalysts 1 and (H(2)IMes)(PCy(3))Cl(2)Ru=CH(2) (2) with different substrates, ethylene, ethyl vinyl ether, and norbornene, and a profound influence of the substrate is found. In contrast to the degenerate reaction with ethylene, the reactions with ethyl vinyl ether and norbornene are strongly exergonic by 8-15 kcal/mol, and this excess energy is released after passing through the metallacyclobutane structure. While the metallacyclobutane is in a deep potential minimum for degenerate metathesis reactions, the energy barrier for the [2+2] cycloreversion vanishes for the most exergonic reactions. On the free energy surface under typical experimental conditions, the rate-limiting steps for the overall reactions are then either metallacyclobutane formation for 1 or phosphane ligand dissociation for 2.     

Substituent effects and the mechanism of alkene metathesis catalyzed by ruthenium dichloride catalysts

Density functional theory calculations are reported concerning the dissociative mechanism for alkene metathesis by ruthenium dichloride catalysts, including both bisphosphine and diaminocarbene/phosphine complexes. The calculations use a hierarchy of models, ranging from [(L)(PH(3))Ru(Cl)(2)(CH(2))](L=PH(3) or diaminocarbene) through the larger [(L)(PMe(3))Ru(Cl)(2)(CHPh)] to the "real"[(L)(PCy(3))Ru(Cl)(2)(CHPh)]. Calculations show that the rate-limiting step for metathesis is either ring closing from an alkene complex to form a ruthena-cyclobutane, or ring-opening of the latter intermediate to form an isomeric alkene complex. The higher efficiency of the diaminocarbene based catalysts is due to the stabilization of the formal +iv oxidation state of the ruthenium centre in the metallacycle. This effect is partly masked in the smaller model systems due to a previously unnoticed stereoelectronic effect. The calculations do not reproduce the experimental observation whereby the initiation step, phosphine dissociation, is more energetically demanding and hence slower for the diaminocarbene-containing catalyst system than for the bisphosphine. Further calculations on the corresponding bond energies using a variety of DFT and hybrid DFT/molecular mechanics methods all find instead a larger phosphine dissociation energy for the bisphosphine catalyst. This reversed order of binding energies would in fact be the one expected based on the stronger trans influence of the diaminocarbene ligand. The discrepancy with experiment is small and could have a number of causes which are discussed here.     

[(NHC)(NHCewg)RuCl2(CHPh)] Complexes with Modified NHCewg Ligands for Efficient Ring‐Closing Metathesis Leading to Tetrasubstituted Olefins

Imidazolium salts (NHC_ewg ? HCl) with electronically variable substituents in the 4,5‐position (H,H or Cl,Cl or H,NO₂ or CN,CN) and sterically variable substituents in the 1,3‐position (Me,Me or Et,Et or iPr,iPr or Me,iPr) were synthesized and converted into the respective [AgI(NHC)_ewg] complexes. The reactions of [(NHC)RuCl₂(CHPh)(py)₂] with the [AgI(NHC_ewg)] complexes provide the respective [(NHC)(NHC_ewg)RuCl₂(CHPh)] complexes in excellent yields. The catalytic activity of such complexes in ring‐closing metathesis (RCM) reactions leading to tetrasubstituted olefins was studied. To obtain quantitative substrate conversion, catalyst loadings of 0.2–0.5 mol % at 80 °C in toluene are sufficient. The complex with the best catalytic activity in such RCM reactions and the fastest initiation rate has an NHC_ewg group with 1,3‐Me,iPr and 4,5‐Cl,Cl substituents and can be synthesized in 95 % isolated yield from the ruthenium precursor. To learn which one of the two NHC ligands acts as the leaving group in olefin metathesis reactions two complexes, [(FL‐NHC)(NHC_ewg)RuCl₂(CHPh)] and [(FL‐NHC_ewg)(NHC)RuCl₂(CHPh)], with a dansyl fluorophore (FL)‐tagged electron‐rich NHC ligand (FL‐NHC) and an electron‐deficient NHC ligand (FL‐NHC_ewg) were prepared. The fluorescence of the dansyl fluorophore is quenched as long as it is in close vicinity to ruthenium, but increases strongly upon dissociation of the respective fluorophore‐tagged ligand. In this manner, it was shown for ring‐opening metathesis ploymerization (ROMP) reactions at room temperature that the NHC_ewg ligand normally acts as the leaving group, whereas the other NHC ligand remains ligated to ruthenium.     

Selective synthesis of chiral dioxabicyclo[4.4.0]decane and dioxabicyclo[5.3.0]decane from 3,4-bisallyloxy-but-1-yne derivatives via ruthenium-catalyzed en-yn-ene metathesis

We prepared a series of chiral 3,4-bisallyloxy-but-1-ynes having syn and anti configurations. Treatment of these substrates with Grubbs catalyst Cl2(PCy3)2Ru=CHPh (3 mol %) preferably gave chiral dioxabicyclo[4.4.0]decane (yields > 55%) in addition to dioxabicyclo[5.3.0]decane in minor proportions. On substitution of the 4-allyloxy group of these substrates with a 4-but-2-enyloxy group, the metathesis reactions produced only dioxabicyclo[5.3.0]decane in the presence of Grubbs ruthenium-imidazolidene carbene catalyst.     

Synthesis,structure, and activity of enhanced initiators for olefin metathesis

A series of ruthenium olefin metathesis catalysts of the general structure (H(2)IMes)(PR(3))(Cl)(2)Ru=CHPh (H(2)IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) have been prepared; these complexes are readily accessible in two steps from commercially available (H(2)IMes)(PCy(3))(Cl)(2)Ru=CHPh. Their phosphine dissociation rate constants (k(1)), relative rates of phosphine reassociation, and relative reaction rates in ring-opening metathesis polymerization (ROMP) and ring-closing metathesis (RCM) have been investigated. The rates of phosphine dissociation (initiation) from these complexes increase with decreasing phosphine donor strength. Complexes containing a triarylphosphine exhibit dramatically improved initiation relative to (H(2)IMes)(PCy(3))(Cl)(2)Ru=CHPh. Conversely, phosphine reassociation shows no direct correlation with phosphine electronics. In general, increased phosphine dissociation leads to faster olefin metathesis reaction rates, which is of direct significance to both organic and polymer metathesis processes.     

Decomposition of a key intermediate in ruthenium-catalyzed olefin metathesis reactions

Dinuclear ruthenium complex, with a bridging carbide and a hydride ligand, and methyltricyclohexylphosphonium chloride result from thermal decomposition of olefin metathesis catalyst, (IMesH2)(PCy3)(Cl)2Ru=CH2. Involvement of dissociated phosphine in the decomposition is proposed. The dinuclear complex has catalytic olefin isomerization activity, which can be responsible for competing isomerization processes in certain olefin metathesis reactions.     

Concise synthesis of (S,S)-(+)-dehydrohomoancepsenolide

A concise total synthesis of the bis-butenolide 3 in optically active form is reported. Key steps are a zinc-mediated "three-component coupling" with formation of dienyne 9 which undergoes ring closing metathesis (RCM) on treatment with (PCy(3))(2)Cl(2)Ru=CHPh. Dimerization of the resulting butenolide 11 is then achieved via alkyne metathesis using (tBuO)(3)W&tbd1;CCMe(3) as the catalyst. A Lindlar reduction completes this synthesis which delivers product 3 in only five steps with an overall yield of 25%.     

Lewis-acid assisted cross metathesis of acrylonitrile with functionalized olefins catalyzed by phosphine-free ruthenium carbene complex

The exchange of the PPh3 ligand in the complex [1,3-bis(2,6-dimethylphenyl)4,5-dihydroimidazol-2-ylidene](PPh3)(Cl)2Ru=CHPh (7) for a pyridine ligand at ambient temperature leads to the formation of the stable phosphine-free carbene ruthenium complex [1,3-bis(2,6-dimethylphenyl)4,5-dihydroimidazol-2-ylidene](C5H5N)2(Cl)2 Ru=CHPh (8). The resulted ruthenium complex exhibits highly catalytic activity for the cross metathesis of acrylonitrile with various functionalized olefins under mild conditions, and its activity can be further improved by the addition of a Lewis acid such as Ti(OiPr)4. In the mixture products, the Z-isomer predominates.     

Formation of dinuclear titanium and zirconium complexes by olefin metathesis--catalytic preparation of organometallic catalyst systems

The titanium complex [(C(5)H(4)bond;allyl)TiCl(3)] (2) undergoes olefin metathesis coupling when treated with 3 mol % of [Cl(2)(L(1))(L(2))Ru=CHPh] (L(1)=L(2)=PCy(3), 4 a; L(1)=PCy(3), L(2)=(H(2)IMes), 4 b) to yield the dimetallic complex [Cl(3)Ti(C(5)H(4))-CH(2)CH=CHCH(2)-(C(5)H(4))TiCl(3)] (5). The allyl-substituted titanocene complex [Cp(C(5)H(4)bond;allyl)TiCl(2)] (3) analogously yields the dimetallic system 6 when treated with 4. The ansa-zirconocene complex [Me(2)Si(C(5)H(4))(C(5)H(3)bond;allyl)ZrCl(2)] (7) cleanly yields the analogous dimetallic coupling product 8 (>95 % isomerically pure), when treated with catalytic amounts of 4 b in toluene. Complex 8 gives an active homogeneous ethene or propene polymerization catalyst, especially at elevated temperatures, when treated with excess methylalumoxane.     

Well-defined N-heterocyclic carbene/ruthenium complexes for the alcohol amidation with amines: The dual role of cesium carbonate and improved activities applying an added ligand

Dehydrogenative amide bond formation from alcohols and amines has been regarded as an atom-economic and sustainable process. Among various catalytic systems, N-heterocyclic carbene (NHC)-based Ru catalytic systems have attracted growing interest due to the outstanding properties of NHCs as ligands. Herein, an NHC/Ru complex ( 1 ) was prepared and its structure was further confirmed with X-ray crystallography. In the presence of Cs₂CO₃, two NHC/Ru-based catalytic systems were disclosed to be active for this amide synthesis. System A, which did not contain any added ligand, required a catalyst loading of 1.00 mol%. Interestingly, improved catalytic performance was realized by the addition of an NHC precursor ( L ). Optimization of the amounts of L and other conditions gave rise to system B, a much more potent system with the Ru loading as low as 0.25 mol%. Moreover, an NHC-Ru-carbonate complex 6 was identified from the refluxing toluene of 1 and Cs₂CO₃, and further investigations revealed that 6 was an important intermediate for this catalytic reaction. Based on the above results, we claimed that the role of Cs₂CO₃ was to facilitate the formation of key intermediate 6 . On the other hand, it provided the optimized basicity for the selective amide formation.     

Two generalizable routes to terminal carbido complexes

Desulfurization of the thiocarbonyl ligand in square pyramidal [Ru(CS)Cl2(PCy3)2] (1-S) via sulfur atom abstraction using [Mo(H)(eta2-Me2CNAr)(N[i-Pr]Ar)2] forms [Ru(C)Cl2(PCy3)2] (1) cleanly over several hours in benzene; isolated yield is 55%. Complex 1 is also formed in 87% isolated yield upon reaction of [Ru(CHR)(PCy3)2Cl2] (R = p-C6H4Me, 2; Ph, 3) with vinyl acetate in dichloromethane. Complex 1-S is re-formed quantitatively from 1 upon treatment with elemental sulfur in CH2Cl2, but is prepared most conveniently by treatment of crude [Ru(CS)Cl2(PPh3)2(OH2)] with excess PCy3 in toluene. Nearly quantitative conversion of 1 to [Ru(CO)Cl2(PCy3)2] (1-O) occurs upon addition of dimethyldioxirane solution in acetone to 1 dissolved in CH2Cl2 at ca. -90 degrees C.     

降冰片烯开环易位聚合反应的分子量及分子量分布控制

使用Grubbs催化剂催化降冰片烯单体进行开环易位聚合反应, 研究了催化剂搅拌溶解时间、聚合反应的溶剂极性和三苯基膦的加入等反应条件对降冰片烯单体ROMP反应分子量及分子量分布的影响, 从而得到降冰片烯ROMP反应的最佳条件.     

Mechanistic studies on 14-electron ruthenacyclobutanes: degenerate exchange with free ethylene

The phosphonium alkylidene [(NHC)Cl2Ru=CH(PCy3)]+[B(C6F5)4]-, 1, (NHC = N-heterocyclic carbene, Cy = cyclohexyl, C6H11) reacts with 2.2 equiv of ethylene at -50 degrees C to form the 14-electron ruthenacyclobutane (NHC)Cl2Ru(CH2CH2CH2), 2. NMR spectroscopic data indicates that 2 has a C2v symmetric structure with a flat, kite shaped ruthenacyclobutane ring with significant Calpha-Cbeta agostic interactions with the Ru center. Intramolecular exchange of Calpha and Cbeta is fast (14(2) s-1 at 223 K) as measured by EXSY spectroscopy. Intermolecular exchange of Calpha and Cbeta with the methylene groups of free ethylene is much slower and first order in both [Ru] and [H2C=CH2] (4.8(3) x 10-4 M-1 s-1). Activation parameters for this process are DeltaH++ = 13.2(5) kcal mol-1 and DeltaS++ = -15(2) cal mol-1 K-1, also consistent with a rate limiting associative substitution as the key step in this exchange process. On the basis of this observation, mechanisms for the intermolecular exchange process are proposed and the implications for the mechanism of the propagation steps in catalytic olefin metathesis as mediated by Grubbs catalysts are discussed.     

Ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene ligands: synthesis, structure, and catalytic activity

A series of ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene (NHC) ligands has been prepared and fully characterized. These complexes are readily accessible in one or two steps from commercially available [(PCy(3))(2)Cl(2)Ru==CHPh]. All of the complexes reported herein promote the ring-closing of diethyldiallyl and diethylallylmethallyl malonate, the ring-opening metathesis polymerization of 1,5-cyclooctadiene, and the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, in some cases surpassing in efficiency the existing second-generation catalysts. Especially in the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, all new catalysts demonstrate similar or higher activity than the second-generation ruthenium catalysts and, most importantly, afford improved E/Z ratios of the desired cross-product at conversion above 60 %. The influence of the unsymmetrical NHC ligands on the initiation rate and the activation parameters for the irreversible reaction of these ruthenium complexes with butyl vinyl ether were also studied. Finally, the synthesis of the related chlorodicarbonyl(carbene) rhodium(I) complexes allowed for the study of the electronic properties of the new unsymmetrical NHC ligands that are discussed in detail.     

Sigma-organyl complexes of ruthenium and osmium supported by a mixed-donor ligand

A series of vinyl, aryl, acetylide and silyl complexes [Ru(R)(kappa2-MI)(CO)(PPh3)2] (R = CH=CH2, CH=CHPh, CH=CHC6H4CH3-4, CH=CH(t)Bu, CH=2OH, C(C triple bond CPh)=CHPh, C6H5, C triple bond CPh, SiMe2OEt; MI = 1-methylimidazole-2-thiolate) were prepared from either [Ru(R)Cl(CO)(PPh3)2] or [Ru(R)Cl(CO)(BTD)(PPh3)2](BTD = 2,1,3-benzothiadiazole) by reaction with the nitrogen-sulfur mixed-donor ligand, 1-methyl-2-mercaptoimidazole (HMI), in the presence of base. In the same manner, [Os(CH=CHPh)(kappa2-MI)(CO)(PPh3)2] was prepared from [Os(CH=CHPh)(CO)Cl(BTD)(PPh3)2]. The in situ hydroruthenation of 1-ethynylcyclohexan-1-ol by [RuH(CO)Cl(BTD)(PPh3)2] and subsequent addition of the HMI ligand and excess sodium methoxide yielded the dehydrated 1,3-dienyl complex [Ru(CH=CHC6H9)(kappa2-MI)(CO)(PPh3)2]. Dehydration of the complex [Ru(CH=CHCPh2OH)(kappa2-MI)(CO)(PPh3)2] with HBF4 yielded the vinyl carbene [Ru(=CHCH=CPh2)(kappa2-MI)(CO)(PPh3)2]BF4. The hydride complexes [MH(kappa2-MI)(CO)(PPh3)2](M = Ru, Os) were obtained from the reaction of HMI and KOH with [RuHCl(CO)(PPh3)3] and [OsHCl(CO)(BTD)(PPh3)2], respectively. Reaction of [Ru(CH=CHC6H4CH3-4)(kappa2-MI)(CO)(PPh3)2] with excess HC triple bond CPh leads to isolation of the acetylide complex [Ru(C triple bond CPh)(kappa2-MI)(CO)(PPh3)2], which is also accessible by direct reaction of [Ru(C triple bond CPh)Cl(CO)(BTD)(PPh3)2] with 1-methyl-2-mercaptoimidazole and NaOMe. The thiocarbonyl complex [Ru(CPh = CHPh)Cl(CS)(PPh3)2] reacted with HMI and NaOMe without migration to yield [Ru(CPh= CHPh)(kappa2-MI)(CS)(PPh3)2], while treatment of [Ru(CH=CHPh)Cl(CO)2(PPh3)2] with HMI yielded the monodentate acyl product [Ru{eta(1)-C(=O)CH=CHPh}(kappa2-MI)(CO)(PPh3)2]. The single-crystal X-ray structures of five complexes bearing vinyl, aryl, acetylide and dienyl functionality are reported.     

Strong agostic-type interactions in ruthenium benzylidene complexes containing 7-azaindole based scorpionate ligands

The complexes [Ru(Tai)Cl{=C(H)Ph}(PCy(3))] (4) and [Ru((Ph)Bai)Cl{=C(H)Ph}(PCy(3))] (5) [where Tai = HB(7-azaindolyl)(3) and (Ph)Bai = Ph(H)B(7-azaindolyl)(2)] have been prepared and structurally characterised. The borohydride unit is located in the coordination site trans to the chloride ligand in both complexes. The degree of interaction between the borohydride group and the metal centre was found to be significantly large in both cases. Thermolysis reactions involving complex 4 led to a dehydrogenation reaction forming [Ru(Tai)Cl{PCy(2)(η(2)-C(6)H(9))}] (6) where the benzylidene group acts as a hydrogen acceptor.