Vanadium alkoxide catalyzed polymerization of vinyl chloride

The polymerization of vinyl chloride (VC) with vanadium complex/alkylaluminum catalyst was investigated. In the case of polymerization with vanadium oxytriethoxide (VO(OEt)₃), poly(vinyl chloride) was obtained in a good yield. The effect of cocatalyst, solvent, and cocatalyst/precatalyst ratio was observed. The structure of the polymer obtained with VO(OEt)₃/i‐Bu₃Al catalyst consisted of regular head‐to‐tail sequence and isobutyl chain‐end structure. VO(OEt)₃/alkylaluminum catalyst was able to copolymerize VC with styrene, 1‐butene, methyl methacrylate, and methyl acrylate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ring-opening polymerization of cyclic esters and trimethylene carbonate catalyzed by aluminum half-salen complexes

A series of ONO-tridentate Schiff base ligands derived from chiral and achiral amino alcohols and amino acids were synthesized and reacted with AlEt(3) to provide dimeric aluminum complexes. These complexes were tested for the ring-opening polymerization (ROP) of rac-lactide at 70 °C in toluene, producing poly(lactide) with up to 82% isotacticity. The most active of these aluminum complexes was chosen to perform ring-opening homopolymerizations of rac-lactide, trimethylene carbonate (TMC), rac-β-butyrolactone (rac-β-BL), δ-valerolactone (δ-VL), and ε-caprolactone (ε-CL). Kinetic parameters were investigated, and each polymerization was found to be first order with respect to monomer concentration. Fractional orders were observed with respect to catalyst concentration, indicating catalyst aggregation during the polymerization processes. Activation parameters were determined for all monomers, with their ΔG(?) values at 90 °C being in the order rac-lactide ≈ rac-β-BL > δ-VL > TMC ≈ ε-CL. Fineman-Ross and kinetic studies of the copolymerization of rac-lactide and δ-VL both indicate that the rate of rac-lactide enchainment is higher than that of δ-VL, resulting in a tapered copolymer. In addition, single crystals of one of these aluminum complexes were grown in the presence of rac-lactide and characterized using X-ray crystallography. The unit cell contains two lactide monomers, one D- and one L-lactide, adding further proof that polymerization takes place via an enantiomorphic site control mechanism.     

Air-stable titanium alkoxide based metal-organic framework as an initiator for ring-opening polymerization of cyclic esters

An air-stable titanium-organic framework, prepared from Ti(OiPr)4 and 1,4-butanediol, has been characterized via single-crystal X-ray diffraction, revealing a unique supramolecular structure. Its functionality as a highly active initiator for the ring-opening polymerization of cyclic esters is demonstrated. A discrete titanium trimer containing the related ligand (2R,3R)-2,3-butanediol has also been prepared, and it shows analogous activity as a polymerization initiator.     

Ring‐opening polymerization and copolymerization of cyclic esters catalyzed by amidinate aluminum complexes

A series of new alkyl mono‐ and bimetallic aluminum complexes supported by novel amidinate ligands has been prepared in very high yields. These complexes were fully characterized by spectroscopic methods. Alkyl aluminum complexes 1 – 6 were investigated as catalysts for the ring‐opening polymerization and copolymerization of ε‐caprolactone and L‐lactide. Under the optimal reaction conditions, complex 5 acts as an efficient single‐component initiator for the ring‐opening polymerization and copolymerization of cyclic esters to yield biodegradable polyester materials with narrow polydispersities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2397–2407     

Photoionization of alkali metal clusters

The photoionization cross section for spherical alkali metal clusters is predicted to oscillate as a function of the photon wavenumber with a frequency determined by the diameter of the cluster. The oscillations and other principal features of the photo cross section can be worked out analytically using semiclassical techniques. An accurate numerical calculation with different cluster potentials confirms these results qualitatively. Quantitative details depend sensitively on the actual potential. Hence, properties of the true cluster potential can be inferred from the experimental cross section. This might turn out to be useful for improving theoretical cluster potentials.     

Structure of alkali metal ionic clusters

Quantum mechanical calculations show that alkali metal ionic clusters of the type M³⁺₄ have the tetrahedral structure, the stability varying as Na³⁺₄ > K³⁺₄ > Rb³⁺₄. Raman spectroscopy has been employed to establish the tetrahedral structure of Na³⁺₄.     

Fission of ionized alkali metal clusters

We study the symmetric fragmentation of ionized alkali clusters within a liquid-drop type model. The interplay of surface and Coulomb interactions leads to a stability condition against small deformations which depends on the ratioZ ²/N. For systems which are stable against small-amplitude oscillations we consider the possibility of large-amplitude modes eventually leading to fission and give in terms of the same quantity an estimate of the potential barrier for this fission channel.     

Anionic ring opening polymerization by alkali metal solutions

The alkali metal solutions were found to be active initiators in the ring-opening polymerization of β-lactones. The chemistry of those solutions and their activity as initiators were discussed.     

Fission of highly charged alkali metal clusters

Highly charged metal clusters can be easily produced using the technique of multi-step photoionization. The critical sizes at which fission occurs are reported here for alkali metal clusters having charges as high as +7. An interpretation within the framework of the liquid droplet model reveals that the fission process is strongly asymmetric and thermally activated.     

Novel ring opening polymerization induced by alkali metal anions

Novel homogeneous initiation systems consisting of organic alkali metal complexes: Me⁺/Ligand, Me⁻ enable synthesis of “living” tailor made polymers and copolymers promising materials for engineering and biomedical applications. The mechanism of this polymerization has been elucidated.     

Hydrolysis of alkenyl esters and ethers catalyzed by metal complexes

[reaction: see text] Various kinds of transition metals catalyzed the hydrolysis of alkenyl esters and ethers under buffer-free, high concentration conditions compared to usual biocatalysts. Hydrolytic kinetic resolution of cis-2-tert-butylcyclohexyl vinyl ether was achieved by chiral (salen)Co complexes with good selectivity (k(rel) = 10.0).     

Structure and reactivity of mixed alkali metal alkoxide/aryloxide catalysts.

The average solution aggregation state of the ester interchange catalyst 1, obtained by mixing 1 equiv of NaOt-Bu and 3 equiv of NaOC(6)H(4)-4-t-Bu, was determined to be 4.0 by vapor pressure osmometry (VPO) in THF. Low-temperature (1)H NMR spectra of 1 indicated that the THF solution contained a mixture of tetrameric clusters. On the basis of symmetry arguments and the sensitivity of the different species to the alkoxide/aryloxide ratio, the compounds were determined to be mixed clusters with 0:4, 1:3, 2:2, and 3:1 mixtures of the NaOt-Bu and NaOC(6)H(4)-4-t-Bu components. On a per -Ot-Bu basis, each cluster has a similar absolute activity, though the aryloxide-rich catalysts are significantly longer-lived. Unlike 1, catalysts containing ortho-substituted aryloxides, 2, do not give a strictly statistical distribution of clusters, and the activities of these catalysts depend on steric and electronic factors, though the absolute rate differences are not large.     

A localized-orbital Hartree-Fock description of alkali metal clusters

We propose a new variational method, based on the ab initio Hartree-Fock methods, for the purpose of calculating efficiently both the equilibrium geometry and stability of alkali metal microclusters. Applying this method to neutral and cationic lithium clusters, up to Li₃₆, we find that the calculated stable cluster size corresponds to the observed magic numbers. Our results also indicate that both neutral and cationic clusters exhibit very similar dependence on the number of electrons both in stability and cluster shape, which is quite similar to the one obtained by the shell model. Furthermore, we find that lithium clusters larger than Li₂₆ have an ordered structure while clusters smaller than this do not. This is suggestive of the occurrence of a structural transition to a solid-like phase.     

Anionic polymerization. III. Polymerization of butadiene with alkali metal alkoxide-modified alkali metal system

A high molecular weight polybutadiene was prepared in hexane solvent by using alkali metal (Li, Na, K) and metal tert-butoxide (Li, Na, K) as a polymerization initiator. The microstructure of polybutadiene varies, depending on the type of modifiers and polymerization and temperatures. The results and mechanistic implications of this study are discussed.     

Well‐controlled ring‐opening polymerization of cyclic esters catalyzed by aluminum amido complexes: Kinetics and mechanism

A series of aluminum dimethyl complexes 1 – 6 bearing N‐[2‐(pyrrolidinyl)benzyl]anilido ligands were synthesized and well characterized. The molecular structure of complex 1 determined by an X‐ray diffraction study indicates the bidentate chelating mode of the pyrrolidinyl‐anilido ligand. In the absence of a coinitiator, these complexes exhibited excellent control toward the polymerizations of ε‐caprolactone and rac‐lactide, affording polyesters with quite narrow molecular weight distributions (M_w/M_n = 1.04–1.26). The end group analysis of ε?CL oligomer via ¹H NMR and ESI‐TOF MS methods gave strong support to the hypothesis that the polymerization catalyzed by these aluminum complexes proceeds via a coordination‐insertion mechanism involving a unique Al? N (amido) bond initiation. Via ¹H NMR scale oligomerization studies, it is suggested that the insertion of the first lactide monomer into Al? N bond of the complex is much easier than the insertion of lactide monomer into the newly formed Al? O (lactate) bond and might also be easier than the insertion of the first ε?CL monomer into Al? N bond. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3096–3106     

Remarkable CO-catalyst effect of gold nanoclusters on olefin oxidation catalyzed by a manganese-porphyrin complex

The effect of dodecanethiolate-protected metallic nanoclusters of gold (Au:SC12, 1), silver (Ag:SC12), palladium (Pd:SC12), and platinum (Pt:SC12) on the catalytic activity of Mn(TPP)Cl (TPP = tetraphenylporphinato) was investigated in styrene oxidation with iodosylbenzene. Among the four metal clusters, only Au:SC12 led to appreciable acceleration of the catalytic reaction. The major role of the Au cluster was to regenerate the active catalytic path involving Mn(III) and Mn(V) from the deactivated Mn(IV) species. The binary 1/Mn(TPP)Cl catalyst system showed an absorption spectrum characteristic of Mn(III)-porphyrin after reaction, whereas a catalytically ineffective Mn(IV) species was observed as the sole porphyrin species in the absence of the Au cluster or in the presence of Pd, Ag, and Pt clusters. Accordingly, the slow oxidation reaction with Mn(TPP)Cl was accelerated by the addition of Au:SC12, and complete conversion of Mn(IV) into Mn(III) was observed in the absorption spectrum. 1H NMR inspection of the reaction of Au:SC12 and iodosylbenzene revealed that the surface dodecyl groups were partially oxidized into dodecanal and eliminated from the cluster surface, thereby producing unprotected gold sites on the surface. A reactivation mechanism involving the reaction of the Mn-porphyrin and the oxidant activated on the gold surface is proposed.     

The mechanism of TBD-catalyzed ring-opening polymerization of cyclic esters

Triazabicyclodecene (TBD) has recently been shown to be an effective organocatalyst for the ring-opening polymerization (ROP) of cyclic esters. Using DFT methods, we have studied possible mechanisms of this reaction. Our studies explain not only the narrow polydispersity index (PDI) observed in the ROP of six-membered ring lactones, but also the surprising failure of the ROP for the more reactive butyrolactone.     

Magnetic properties of free alkali and transition metal clusters

The Stern-Gerlach deflections of small alkali clusters (N<6) and iron clusters (10<N<500) show that the paramagnetic alkali clusters always have a non-deflecting component, while the iron clusters always deflect in the high field direction. Both of these effects appear to be related to spin relaxation however in the case of alkali clusters it is shown that they are in fact caused by avoided level crossing in the Zeeman diagram. For alkali clusters the relatively weak couplings cause reduced magnetic moments where levels cross. For iron clusters however the total spin is strongly coupled to the molecular framework. Consequently this coupling is responsible for avoided level crossings which ultimately cause the total energy of the cluster to decrease with increasing magnetic field so that the iron clusters will deflect in one direction when introduced in an inhomogeneous magnetic field. Experiment and theory are discussed for both cases.     

A theoretical study on the alkali metal carboxylate-promoted L-Lactide polymerization

Sodium acetate-catalyzed L-lactide polymerization reaction is a simple yet efficient reaction. It provides a robust system to produce poly(L-lactide) in industrial scale. In this study, the mechanism of this reaction has been studied by means of computational chemistry tools based on the experimental results. Basically, the mechanism consists of two steps: lactide coordination and ring opening through O-Acyl bond cleavage. Additionally, the effect of cation size and substituent on carboxylate moiety have been evaluated. The calculations indicate that the larger cation leads to faster reactions. Moreover, the stronger electron-donating group on carboxylate moiety accelerates the reaction rates. To obtain further insights, an orbital analysis has been also carried out. Our calculations are consistent with experimental findings and clarify underlying mechanistic features of the present reaction.     

Bis(guanidinate) alkoxide complexes of lanthanides: synthesis, structures and use in immortal and stereoselective ring-opening polymerization of cyclic esters

A series of new bis(guanidinate) alkoxide Group 3 metal complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) has been synthesized. X-ray structural determinations revealed that bis(guanidinate) tert-butoxides are monomeric complexes. The isopropoxide complex [Y((Me3Si)2NC(NiPr)2)2(OiPr)] undergoes slow decomposition in solution, to afford the unusual dimeric amido complex [(Y((Me3Si)2NC(NiPr)2)2(mu-N(iPr)C triple chemical bond N))2]. Complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) are active catalysts/initiators for the ROP of rac-lactide and rac-beta-butyrolactone under mild conditions. Most of those polymerizations proceed with a significant degree of control. Bis(guanidinate) alkoxides appear to be well suited for achieving immortal polymerization of lactide, through the introduction of large amounts of isopropanol as a chain-transfer agent. The synthesized complexes are able to promote the stereoselective ROP of rac-beta-butyrolactone to afford syndiotactic poly(hydrobutyrate) through a chain-end control mechanism, while they are surprisingly non-stereoselective for the ROP of lactide under strictly similar conditions.