Solid phase extraction of metal ions using carbon nanotubes

The sorption behaviour of carbon nanotubes (CNTs) toward some divalent metal ions such as Cu(II), Co(II), Ni(II), Zn(II), Pb(II), Mn(II) and Cd(II) has been investigated systematically. The affinity order of the metal ions towards CNTs at pH in the range of 7.0-9.0 was: Cu(II) > Pb(II) > Zn(II) > Co(II) > Ni(II) > Cd(II) > Mn(II). The experimental parameters for preconcentration of copper, which exhibits the highest affinity towards carbon nanotubes, on a microcolumn packed with CNTs prior to its determination by flame atomic absorption spectrometry have been investigated. Copper can be quantitatively retained at pH 8.2 from sample volume up to 150 mL and then eluted completely with 0.1 mol L^− 1 HNO₃. The limit of detection limit for Cu(II) determination with FAAS detection was 2.1 μg L^− 1, and the RSD was 3.5% at the 50 μg L^− 1 level. Under the optimal conditions for copper enrichment also Zn(II), Pb(II) and Ni(II) could be quantitatively preconcentrated from water samples. The method was validated using a certified reference materials BCR-610 and SRM 1640.     

Solid-phase extraction and simultaneous spectrophotometric determination of trace amounts of Co, Ni and Cu using partial least squares regression

A novel sensitive and simple method for rapid extraction, preconcentration and determination of cobalt, nickel and copper as their 1-(2-pyridilazo)-2-naphthol (PAN) complexes using polytetrafluoroethylene filter as solid phase and multivariate calibration of spectrophotometric data is presented. The analytical wavelengths of 400-700 nm were chosen and the experimental calibration matrix for partial least squares (PLS) was designed with 21 samples of 5.90-41.25, 0.30-29.35 and 0.64-41.30 ng ml⁻¹ for cobalt, nickel and copper, respectively. The cross-validation method was used for selecting the number of components. The root-mean-square errors of predictions (RMSEPs) were between 0.48 and 1.37 ng ml⁻¹. In this work we could reach preconcentration factors of 100 or even higher by using polytetrafluoroethylene as solid phase which is cheap and can be used in a wide range of pH, flow rates and for many times. The proposed method was successfully applied to the simultaneous determination of Co, Ni and Cu in tap and pit water samples.     

Enrichment of steroid hormones in water with porous and hydrophobic polymer‐based SPE followed by HPLC–UV determination

There have been great concerns about the persistence of steroid hormones in surface water. Since the concentrations of these compounds in water samples are usually at a trace level, the efficient enrichment of steroid hormones is vital for further analysis. In this work, a porous and hydrophobic polymer was synthesized and characterized. The composition of solvent used as porogen in the synthetic process was shown to have an effect on the morphology of the polymer, which was successfully used as an SPE sorbent for simultaneously enriching steroid hormones in surface water samples. The recoveries of the steroid hormones on the custom‐made polymer ranged from 93.4 to 106.2%, whereas those on commercialized ENVI‐18, LC‐18, and Oasis HLB ranged from 54.8 to 104.9, 66 to 93.6, and 77.2 to 106%, respectively. Five types of steroid hormones were simultaneously measured using HPLC–UV after they were enriched by the custom‐made sorbent. Based on these findings, the SPE–HPLC method was developed. The LODs of this method for estriol, estradiol, estrone, androstenedione, progesterone were 0.07, 0.43, 0.61, 0.27, and 0.42 μg/L, respectively, while precision and reproducibility RSDs were <6.40 and 7.49%, respectively.     

Simultaneous extraction and preconcentration of copper,silver and palladium with modified alumina and their determination by electrothermal atomic absorption spectrometry

In the present work,an easy solid phase extraction method using alumina modified with polyethylenimine as a new adsorbent was applied to the simultaneous extraction of copper,silver,and palladium ions prior to their determination with electrothermal atomic absorption spectrometry.The analytical procedure involved the complex formation of these cations with polyethylenimine as a chelating agent in buffer media of pH 7.0.Under the optimum conditions,a preconcentration factor of200,150,and 200,precision of ±5.4%,±4.7%,and ±5.2%and linear calibration ranges of 15.0-140,4.0-93,and 7.5-125 ng/L(in original solution) for Cu,Ag,and Pd were obtained,respectively.Also detection limits of3.9,1.1,and 2.0 ng/L were obtained for Cu,Ag,and Pd,respectively.The proposed method was applied to the determination of copper,silver,and palladium in some real samples with satisfactory results.     

Comparison of liquid-liquid extraction, solid-phase extraction and co-precipitation preconcentration methods for the determination of cadmium, copper, nickel, lead and zinc in seawater

Three major types of pre-concentration methods were evaluated and optimised for the extraction and determination of Cd, Cu, Ni, Pb and Zn from seawater samples. The traditional APDC/DDDC-Freon liquid-liquid extraction method showed excellent results for a multi-elemental analysis. However, the technique is labour consuming, very sensitive to operational conditions, employs environmentally unsafe and expensive solvents and requires large sample volumes. In the solid phase extraction method, the performances of a traditional Amberlite XAD-4 and a novel Dowex Optipore V-493 were evaluated. Application of Dowex Optipore V-493 resin provided better results at low concentrations than the generally used Amberlite XAD-4 resin using low sample volumes. However, the presence of natural organic compounds may decrease extraction efficiency of both resins for Cu. Thus, a pre-treatment with UV irradiation is advantageous for samples with high organic content. Cobalt co-precipitation methods showed good Cu and Ni recoveries, but gave poor results for Cd at low concentrations. In addition, high sample volumes are required. Both solid phase and co-precipitation methods showed unsatisfactory results in determination of Pb. Finally, a summary of methods advantages are given for choosing the most suitable method.     

Simultaneous extraction and determination of free and conjugated phytosterols in tobacco

Acid hydrolysis and alkaline saponification were incorporated into a microwave‐assisted extraction process for the simultaneous extraction of free and conjugated phytosterols from tobacco. The crude extract of the microwave‐assisted extraction was purified by C₁₈ solid‐phase extraction and then determined by high‐performance liquid chromatography. Phytosterols of cholesterol, ergosterol, stigmasterol, campesterol, and β‐sitosterol were determined by chromatographic quantification. The multiple parameters of microwave‐assisted extraction were optimized by a uniform design method. The optimal ratio of extraction ethanol solvent to tobacco mass was 30 mL/g. The microwave‐assisted extraction acid hydrolysis was carried out in sulfuric acid medium by heating for 10 min at 55°C. The microwave‐assisted extraction alkaline saponification was performed after adding excessive sodium hydroxide by heating another 10 min. The repeatability of the proposed method was acceptable with recoveries from 69.68 to 88.17% for the phytosterols. Five target phytosterols were all found in the tobacco samples, and the contents were significantly different in samples from different producing areas.     

Application of magnetic graphitic carbon nitride nanocomposites for the solid‐phase extraction of phthalate esters in water samples

Magnetic graphitic carbon nitride nanocomposites were successfully prepared in situ and used to develop a highly sensitive magnetic solid‐phase extraction method for the preconcentration of phthalate esters such as di‐n‐butyl phthalate, butyl phthalate, dihexyl phthalate, and di‐(2‐ethyl hexyl) phthalate from water. The adsorption and desorption of the phthalate esters on magnetic graphitic carbon nitride nanocomposites were investigated and the parameters affecting the partition of the phthalate esters, such as adsorption, desorption, recovery, were assessed. Under the optimized conditions, the proposed method showed excellent sensitivity with limits of detection (S/N = 3) in the range of 0.05–0.1 μg/L and precision in the range of 1.1–2.6% (n = 5). This method was successfully applied to the analysis of real water samples, and good spiked recoveries over the range of 79.4–99.4% were obtained. This research provides a possibility to apply this nanocomposite for adsorption, preconcentration, or even removal of various carbon‐based ring or hydrophobic pollutants.     

Simultaneous determination of four trace estrogens in feces,leachate, tap and groundwater using solid–liquid extraction/auto solid‐phase extraction and high‐performance liquid chromatography with fluorescence detection

A simple and selective high‐performance liquid chromatography method coupled with fluorescence detection was developed for the simultaneous measurement of trace levels of four estrogens (estrone, estradiol, estriol and 17α‐ethynyl estradiol) in environmental matrices. For feces samples, solid–liquid extraction was applied with a 1:1 v/v mixture of acetonitrile and ethyl acetate as the extraction solvent. For liquid samples (e.g., leachate and groundwater), hydrophobic/lipophilic balanced automated solid‐phase extraction disks were selected due to their high recoveries compared to conventional C₁₈ disks. Chromatographic separations were performed on a reversed‐phase C₁₈ column gradient‐eluted with a 45:55 v/v mixture of acetonitrile and water. The detection limits were down to 1.1 × 10^?2 (estrone), 4.11 × 10^?4 (estradiol), 5.2 × 10^?3 (estriol) and 7.18 × 10^?3 μg/L (17α‐ethynyl estradiol) at excitation/emission wavelengths of 288/310 nm, with recoveries in the range of 96.9 ± 3.2–105.4 ± 3.2% (n = 3). The method was successfully applied to determine estrogens in feces and water samples collected at livestock farms and a major river in Northeast China. We observed relatively high abundance and widespread distribution of all four estrogens in our sample collections, implying the urgency for a comprehensive and intricate investigation of estrogenic fate and contamination in our researched area.     

2-(4-羧基苯偶氮)苯并噻唑固相萃取分光光度法测定铂的研究

根据新试剂2-(4-羧基苯偶氮)苯并噻唑(CPABT)与铂的显色反应及C8固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量铂的新方法,在pH为3.8~5.5的乙酸-乙酸钠缓冲介质中,在Tween-80存在下,铂与CPABT发生反应形成1∶1的稳定络合物,该络合物可用C8固相萃取小柱富集,小柱上富集的络合物用二甲基甲酰胺洗脱后用分光光度法测定,在富集后的测定液中,络合物最大吸收波长为508 nm,摩尔吸光系数ε=2.29×105L.mol-1.cm-1,Pt4 量在0.1~1.2μg/mL内符合比尔定律,方法已用于测定催化剂中的铂。     

Using on-line solid phase extraction for flow-injection spectrophotometric determination of salbutamol

In the proposed procedure, the determination of salbutamol with Folin-Ciocalteau reagent (FC) using a flow injection analysis technique (FIA) with spectrophotometric detection at 750 nm is described. The lab-made FIA system consisted of a peristaltic pump Gilson Minipulse 3 equipped with Tygon tubes, double 6-port external Vici Valco sample injector and S 2000/SAD500 fiber optic spectrophotometer. It was controlled by a PC with use of originally compiled LabVIEW^®—supported software containing the mathematical library with various statistical functions for off-line data evaluation. Concentration, volume of reagents and flow rate were optimised by a simplex method. The proposed system was used for the direct determination of salbutamol sulphate in the tablets and the human urine without preliminary pre-treatment of the sample. The negative effect of interfering substances (excipients of the tablets and matrix of the urine) is overcome by a solid phase extraction (SPE), when salbutamol is adsorbed on the solid phase in the microcolumn, which is integrated directly into the flow system. Pre-treatment of the sample takes place directly in the flowing stream. The sample throughput without carryover of on-line SPE was 60-80 samples per hour. With the SPE column (Baker—carboxylic acid), salbutamol was determined in the linear range from 1 to 15 μg ml⁻¹ (R.S.D.=1.2%), with detection limit (3σ) 0.1 μg ml⁻¹ and a frequency of 40-60 samples per hour in the water solutions. The salbutamol was determined in the linear range from 2 to 20 μg ml⁻¹ (R.S.D.=1.7%), with detection limit (3σ) 1 μg ml⁻¹ and a frequency of 30 samples per hour in the samples of the human urine.     

新试剂NSPAR固相萃取光度法测定氰化渣中铂的研究

在pH2.5的氯乙酸NaOH缓冲介质中,吐温80存在下,磺硝酚偶氮若丹宁(NSPAR)与铂反应生成2∶1稳定络合物,该络合物可被WatersSep PakC18小柱固相萃取,用氮氮二甲基甲酰氨(DMF)洗脱后用光度法测定。在洗脱液介质中,λmax=535nm,摩尔吸光系数ε=6.33×104L·mol-1·cm-1。铂质量浓度在0 001～0 080μg/mL内符合比尔定律,本方法可用于氰化渣中铂的测定。     

A review of solid phase extraction: Basic principles and new developments

Summary A review with 178 references on the basic principles and recent developments in the solid phase extraction is presented. New solid phases, chromatographic modes, experimental configurations and off-line and on-line automated devices are discussed.     

Analytical applications of admicelle and hemimicelle solid phase extraction of organic analytes

A current literature review, consisting of 42 publications, is provided on the topic of using admicelle/hemimicelle formations on solids for the analytical scale preconcentration of a variety of organic analytes.     

Ultrasonic solvent extraction and nonaqueous CE for the determination of herbicide residues in potatoes

In the present work we address the development of a simple and effective method for the determination of triazine herbicide residues in horticultural products by CE in nonaqueous media (NACE). Potato samples were selected as a representative matrix of such foods with a nonfatty content. Isolation of the analytes from the sample matrix was accomplished by extraction with organic solvents, assisted by ultrasound; a clean‐up step of the organic extracts was carried out with SPE, using an Oasis MCX® sorbent to retain the analytes directly from the organic medium. The detection limits achieved in spiked potatoes (1.7–4.0 μg/kg) were lower than the default value of maximum residue level (MRL) established by current EU legislation for pesticide residues in foodstuffs. The results obtained were compared with HPLC in order to evaluate the performance of the NACE procedure.     

钯与对若丹宁偶氮苯甲酸络合物的固相萃取和光度测定

根据新试剂对若丹宁偶氮苯甲酸(RABA)与钯的显色反应及C18固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的新方法,在pH为2.0～4.0的HCl-邻苯二甲酸氢钾(HCl-KHP)缓冲介质中,在CTMAB存在下,钯与RABA发生反应形成1:1的稳定络合物,该络合物可用C18固相萃取小柱富集,小柱上富集的络合物用乙醇洗脱后用光度法测定,在富集后的测定液中,络合物最大吸收波长为500 nm,摩尔吸光系数ε=1.36×105 L·mol-1·cm-1,Pd2 量在0.1～1.0 μg/mL内符合比尔定律,方法用于催化剂中钯的测定.     

Application of thiophene-2-carbaldehyde-modified mesoporous silica as a new sorbent for separation and preconcentration of palladium prior to inductively coupled plasma atomic emission spectrometric determination

A new and efficient method was described for an easy synthesis of functionalized mesoporous silica (MCM-41) using thiophene-2-carbaldehyde. This new chemically bonded analytical reagent was used as an effective sorbent for the solid phase extraction of palladium(II) ion from aqueous solutions. Conditions for effective adsorption of trace levels of palladium concentration were optimized with respect to different experimental parameters in batch process. Thiourea solution could efficiently elute adsorbed palladium(II) ion from the surface of the sorbent which then was determined by inductively coupled plasma atomic emission spectrometer (ICP-AES).Common coexisting ions did not interfere with the separation and determination. The preconcentration factor was 100 (1 ml elution volume) for a 100 ml sample volume. The limit of detection of the proposed method is 0.2 ng ml⁻¹. The maximum sorption capacity of sorbent under optimum conditions has been found to be 5 mg of palladium per gram of sorbent. The relative standard deviation under optimum conditions was 3.2% (n = 10). Accuracy and application of the method was estimated by using test samples of natural and synthetic water spiked with different amounts of palladium(II) ion.     

Disposable pipette tips extraction: Fundamentals,applications and state of the art

Disposable pipette tips extraction consists of a solid‐phase extraction in which the sorbent is poorly dispersed in a pipette tip, which allows a quick and dynamic contact between the aspirated analyte from the sample and the solid phase. It is a technique used particularly in food and forensic analysis, since it requires a small amount of sample and solvent. This article highlights the principles, advantages and disadvantages of the disposable pipette tips extraction method and reviews recent applications.     

Studies on synthesis and application of XAD-4-salen chelate resin for separation and determination of trace elements by solid phase extraction

The use of chemically modified XAD-4-salen chelating resin had been studied for the separative concentration of metal ions from an aqueous solution. XAD-4-salen was synthesized by diazonium coupling reaction of salen[N,N′-bis(salicylidene)ethylenediamine] and Amberlite XAD-4 resin. The distribution coefficient at various pH values and adsorption capacities were obtained with respect to Cu(II), Pb(II) and Bi(III). Trace elements were pre-concentrated on the synthesized XAD-4-salen by batch method for atomic absorption spectrometric determination. Some conditions, such as the pH of aqueous solution, amount of XAD-4-salen, kinds and concentration of acids were optimized for the analytical application of XAD-4-salen. For the pre-concentration of metal ions, the pH of the aqueous solution was adjusted to approximately 5.5, and then it was stirred 30 min after the addition of 50 mg of pulverized XAD-4-salen. The adsorbed metal ions were desorbed by 10 mL of 1.0 M HNO₃. The desorption efficiency of Bi(III) was enhanced by the addition of 30 mg/L of Pd(II). The addition of Pd(II) as a matrix modifier could improve the reproducibility and sensitivity in the Atomic Absorption Spectroscopy (AAS) determination of volatile lead and bismuth. In the present study, this procedure has been applied for the determination of Cu(II), Pb(II) and Bi(III) in real samples of five kinds of river water, using a standard calibration curve method. Recoveries of 85–120% were obtained in the spiked samples in which given amount of analytes were added.     

Combined solid-phase extraction and gas chromatography-mass spectrometry used for determination of chloropropanols in water

A sensitive and rapid derivatization method for the simultaneous determination of 1,3-dichloro-2-propanol (1,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD) in water samples has been developed. The aim was to research the optimal conditions of the derivatization process for two selected reagents. A central composite design was used to determine the influence of derivatization time, derivatization temperature and reagent volume. A global desirability function was applied for multi-response optimization. The analysis was performed by gas chromatography-mass spectrometry. During the optimization of the extraction procedure, four different types of solid-phase extraction (SPE) columns were tested. It was demonstrated that the Oasis HLB cartridge produced the best recoveries of the target analytes. The pH value and the salinity were investigated using a Doehlert design. The best results for the SPE of both analytes were obtained with 1.5 g of NaCl and pH 6. The proposed method provides high sensitivity, good linearity (R(2)≥0.999) and repeatability (relative standard deviations % between 2.9 and 3.4%). Limits of detection and quantification were in the range of 1.4-11.2 ng/mL and 4.8-34.5 ng/mL, respectively. Recoveries obtained for water samples were ca. 100% for 1,3-DCP and 3-MCPD. The method has been successfully applied to the analysis of different samples including commercially bottled water, an influent and effluent sewage.