Spectrophotometric method for the determination of ascorbic acid with iron (III)-1,10-phenanthroline after preconcentration on an organic solvent-soluble membrane filter

A solvent-soluble membrane filter is proposed for the simple and rapid preconcentration and spectrophotometric determination of ascorbic acid based on the reduction of 1, 10-phenanthroline (phen)-iron (III), which is collected on a nitrocellulose membrane filter as an ion-associate of the cationic complex of tri,phen-iron (II) [ferroin, Fe(phen)²⁺₃] with an anionic surfactant (of dodecyl sulfate). The ion-associate collected is dissolved in a small volume of 2-methoxyethanol together with the filter. The colour intensity is measured at 510 nm against the reagent blank and is proportional to the content of ascorbic acid in the range 2.5–50 g ascorbic acid in 5 ml of solvent with excellent reproducibility (RSD 3.2% for 200 g 1^–1 ascorbic acid), the enrichment factor achieves 100-fold and detection limits better than 2.0 g 1^–1 can be obtained. Diverse components of organic and inorganic compounds normally present in fruits, vegetable, beverages and urine do not interfere. The recoveries of the ascorbic acid added to the samples are quantitative.     

Determination of Iron (II) in Water by a Spectrophotometric Method After Preconcentration on an Organic Solvent-Soluble Membrane Filter

Abstract

A solvent-soluble membrane filter is proposed for a simple and rapid preconcentration and spectrophotometric determination of iron (II), which was collected on a nitrocellulose membrane filter as an ion-associate of the cationic complex of iron (II)-1,10-phenanthroline with an anionic surfactant of dodecyl sulfate. The ion-associate collected was dissolved in 5 ml of 2-methoxyethanol together with the filter. The color intensity due to the ion-associate in the resulting solution was measured at 510 nm against a reagent blank. Beer's law is obeyed in the range 1–15 μg Fe (II) in 5 ml of solvent with excellent reproducibility, and detection limits better than 0.5 μg dm^?3 as Fe (II) can be achieved. The diverse components normally present in water do not interfere when proper masking reagent is added. The proposed method has been applied to the analysis of water samples from several sources such as river water, ground water and tapwater samples, the recoveries of the iron (II) added to the samples are quantitative, and results found are satisfactory.     

Flow injection spectrophotometric determination of ascorbic acid in soft drinks and beer

Two spectrophotometric methods, a photochemical and a non-photochemical, for the determination of ascorbic acid in soft drinks and beer using a flow-injection system are proposed. The non-photochemical method is based on the redox reaction that takes place between ascorbic acid and Fe(III), yielding dehydroascorbic acid and Fe(II). Fe(II) reacts with 1,10-phenantroline, originating the reddish orange Fe(phen)3(2+) complex (ferroin). This complex is spectrophotometrically monitored at 512 nm, and the signal is directly related to the concentration of ascorbic acid in the sample. The photochemical method has the same basis, nevertheless, uses the irradiation with visible light to enhance the redox reaction and so achieve higher sensitivities in the analysis. The non-photochemical method shows a linear range between 5 and 80 microg mL(-1), with a relative standard deviation of 1.6% (n = 11), a detection limit of 2.7 microg mL(-1) and a sample throughput of 60 samples h(-1). The photochemical method shows a linear range between 1 and 80 microg mL(-1), with a relative standard deviation of 1.0% (n = 11 ), a detection limit of 0.5 microg mL(-1) and a sample throughput of 40 samples h(-1).     

Kinetic spectrofluorimetric determination of trace ascorbic acid based on its inhibition on the oxidation of pyronine Y by nitrite

A highly sensitive spectrofluorimetric method is proposed for the determination of trace amount of ascorbic acid using a new indication. The method is based on the inhibition of ascorbic acid on the oxidation of pyronine Y (PRY) by nitrite. The detection limit for ascorbic acid is 0.012 microg ml(-1), the linear range of the determination is 0.02-0.36 microg ml(-1). Analytical parameters, such as reagent concentration, pH, reaction temperature and time, were optimized. The relative standard deviations of eleven replication determinations of 0.12 and 0.24 microg ml(-1) ascorbic acid were 1.4 and 0.72%, respectively. This method has been used to determine ascorbic acid in pharmaceuticals, vegetables, fruits and soft drink with satisfactory results.     

Determination of tin by resin-suspension electrothermal atomic absorption spectrometry after enrichment as the complex with ammonium pyrrolidinedithiocarbamate.

A resin-phase extraction method has been optimized for the trace determination of tin(II) by ETAAS. Tin(II) was extracted on a finely divided anion exchange resin as the complex with ammonium pyrrolidinedithiocarbamate (APDC). The resin was collected on a membrane filter and then dispersed in 1.00 ml of 1 mol l(-1) nitric acid containing 100 microg of Pd(II) and 60 microg of Ni(II). The resulting resin suspension was subjected to GFAAS. The proposed method was applied to the determination of tin(II) in hydrochloric acid.     

Mechanistic studies on oxidation of L-ascorbic acid by an oxo-bridged diiron complex in aqueous acidic media

[Fe2(micro-O)(phen)4(H2O)2]4+ (1) (Fig. 1, phen = 1,10-phenanthroline) equilibrates with [Fe2(micro-O)(phen)4(H2O)(OH)]3+ (2) and [Fe2(micro-O)(phen)4(OH)2]2+ (3) in aqueous solution in the presence of excess phen, where no phen-releasing equilibria from 1, 2 and 3 exist. 1 quantitatively oxidizes ascorbic acid (H2A) to dehydroascorbic acid (A) in the pH range 3.00-5.50 in the presence of excess phen, which buffers the reaction within 0.05 pH units and ensures complete formation of end iron product ferroin, [Fe(phen)3]2+. The reactive species are 1, 2 and HA- and the reaction proceeds through an initial 1 : 1 inner-sphere adduct formation between 1 and 2 with HA-, followed by a rate limiting outer-sphere one electron one proton (electroprotic) transfer from a second HA- to the ascorbate-unbound iron(III).     

Determination of ascorbic acid in soft drinks, preserved fruit juices and pharmaceuticals by flow injection spectrophotometry: Matrix absorbance correction by treatment with sodium hydroxide

Two flow injection systems for the spectrophotometric determination of ascorbic acid at 245 nm have been described. On treatment with sodium hydroxide a fraction of the ascorbic acid was decomposed into substances, which do not absorb in UV region, and the decrease in signal measured. This was directly related to the amount of ascorbic acid present. The calibration graph was linear over the range 1-25 and 1-50 microg/ml in the two methods with a correlation coefficient of 0.9981 and 0.9994, respectively. The detection limit (2sigma) was 0.5 and 0.2 microg/ml, respectively. The RSD for 1 microg/ml standard was 2.5 and 1.8% (n = 6) in the two methods, and the sampling throughput 30/hr. The methods permitted the use of 6 microg/ml of 2-mercaptoethanol as an anti-oxidant and stabilizer for ascorbic acid, which is difficult to handle at its microg/ml level. Upon matrix absorbance correction, spiked samples that are known to contain UV-absorbing substances produced an average recovery of 101% with a RSD of 1.2%. The methods were used for the rapid and simple determination of ascorbic acid in soft drinks, preserved fruit juices and pharmaceuticals and the results thus produced compared with those obtained by previously checked methods involving titration with iodine, chloranil 2,6-dichlorophenolindophenol, and HPLC. When there was a disagreement between the results, this was traced to the presence of substances which are known to interfere in comparison methods.     

Kinetic method for determination of ascorbic acid on flow injection system by using its catalytic effect on the complexation reaction of an ultra sensitive colorimetric reagent of porphyrin with Cu(II)

A kinetic method performed on a flow injection system is described for the determination of ascorbic acid by using its catalytic effect on the complexation reaction of Cu(II) with 5,10,15,20-tetrakis(4-N-trimethyl-aminophenyl)porphyrin. The characteristic spectrum of porphyrin (Soret band), which shows intense absorption around 400 nm (epsilon>2.0 x 10(5) cm(-1)M(-1)), was used first time for determining ascorbic acid. By incorporating the complexation reaction into a flow injection system, ascorbic acid could be determined either over a broad dynamic range of 0.1-1000 microg/ml or at a trace level below 5 ng/ml. Good repeatability was also achieved by testing a working standard of 0.1 microg/ml with 10 injections at a throughput of 35 h(-1), obtaining a relative standard deviation of 0.11%. Substances like amino acids, vitamins, sugars, organic acids and metal ions, showed no or little interference even present at high concentrations. The method was validated in the determination of ascorbic acid contents of some commercially available soft drinks by comparison with the official 2,6-dichloroindophenol method with reasonable agreement.     

Spectrophotometric Determination of Chromium(VI) with Cr(VI)-o-Cl-PF–TDPC Ternary Complex after Preconcentration on an Organic Solvent-soluble Membrane Filter

Abstract

A simple and rapid preconcentration technique, based on collecting trace hexavalent chromium on an organic soluble membrane filter is described. At pH 5.0, chromium(VI), o-chlorophenyl-fluorone (o-Cl-PF) and tetradecylpyridinium chloride (TDPC) form the ternary ion-associate chelate, which can be collected on a 0.2μm nitrocellulose membrane. The filter is dissolved in a small volume of dimethyl sulfoxide (DMSO) acidified with 0.15 mL 3 mol/L sulfuric acid, and the absorbance of the resulting solution is measured at 545 nm wavelength against the reagent blank. The absorbance is proportional to the content of hexavalent chromium in the range of 0.1–1.8μg, in 5 mL solvent. The sensitivity of the ternary complex reaction is very high with molar absorptivity of 1.2 × 10⁵. A detection limit better than 0.3 μg/L can be achieved. The ions normally present in water do not interfere when mixed masking agents are added. The proposed method has been applied to the analysis of water samples from several sources, the recoveries of the hexavalent chromium added to the samples are quantitative, and results found are satisfactory.     

Fluorimetric determination of total ascorbic acid by a stopped-flow mixing technique

A simple, rapid and automatic fluorimetric method for the determination of total ascorbic acid is described. The method makes use of the stopped-flow mixing technique in order to achieve the rapid oxidation of ascorbic acid by dissolved oxygen to dehydroascorbic acid, which then reacts with o-phenylenediamine to form a fluorescent quinoxaline. The initial rate and fluorescence signal of this system are directly proportional to the ascorbic acid concentration. The calibration graph was linear over the range 0.1-30 microg ml(-1) (kinetic method) and 0.25-34 microg ml(-1) (equilibrium method). The precision (% RSD) was close to 0.5%. The method has been used for the determination of ascorbic acid in pharmaceutical formulations, fruit juices, soft drinks and blood serum.     

Determination of trace nitrite ion in water by spectrophotometric method after preconcentration on an organic solvent-soluble membrane filter

A simple and rapid preconcentration technique, based on collecting trace nitrite on a membrane filter and dissolving the membrane filter in an organic solvent, has been applied to its spectrophotometric determination in water. At pH 2.0, nitrous acid diazotizes with p-aminoacetophenone. which is then coupled with N-(1-naphthyl)ethylenediamine, at the same pH. The azo dye formed is collected on a 0.45 urn nitrocellulose filter at pH 4.7 as its ion associate with dodecyl sulfate. The ion associate and filter are dissolved in a small volume of 2-methoxyethanol (methylcellosolve), and acidized with 0.05 ml of 2 M hydrochloric acid and the absorbance of the resulting solution is measured at 555 nm against a reagent blank. Detection limits better than O.1 mug/dm(-3) as NO(2)(-) can be achieved. The ions normally present in water do not interfere when sodium metaphosphate is added as a masking agent. The proposed method has been applied to the analysis of water samples from several sources, the recoveries of the nitrite added to the samples are quantitative, and results found are satisfactory.     

Micro-organic ion-associate phase extraction via in situ fresh phase formation for the preconcentration and determination of di(2-ethylhexyl)phthalate in river water by HPLC.

A high-enrichment method was proposed for the HPLC determination of trace di(2-ethylhexyl)phthalate (DEHP) in environmental water. A micro-organic ion-associate phase (IAP) was formed in situ from an aqueous sample by adding 4-trifluoromethylanilinium ion and dodecylbenzenesulfonate ions. Centrifugation of the solution led to the isolation of a liquid organic phase containing DEHP at the bottom of the centrifuge tube. The volume of the phase formed was less than 30 microL. DEHP was extracted into the IAP quantitatively during phase formation. After discarding the aqueous phase, the ion associate was dissolved with 50 microL of 2-methoxyethanol, and DEHP in the concentrate was determined by HPLC with an ultra-violet (UV) diode-array detector. DEHP in the concentrations range from 0.8 to 78 microg L(-1) was determined with good precision. The recovery tests for DEHP added to some river water were satisfactory. The detection limit of DEHP, defined as 3-times the standard deviation of the blank signals, was 0.07 microg L(-1) (n = 3). The present method is very simple, and was applied to the determination of DEHP in the river water samples collected around Toyama City, Japan.     

Simultaneous spectrophotometric determination of phosphate and silicate by using principal component artificial neural network

A very sensitive, simple and selective spectrophotometric method for simultaneous determination of phosphate and silicate based on formation of phospho- and silicomolybdenum blue complexes in the presence of ascorbic acid is described. Although the complexes of phosphate and silicate with reagent in the presence of ascorbic acid show a spectral overlap, they have been simultaneously determined by principal component artificial neural network (PC-ANN). The PC-ANN architectures were different for phosphate and silicate. The output of phosphate PC-ANN architecture was used as an input for silicate PC-ANN architecture. This modification improves the capability of silicate PC-ANN model for prediction of silicate concentrations. The linear range was 0.01-3.00 microg mL(-1) for phosphate and 0.01-5.00 microg mL(-1) for silicate. Interference effects of common anions and cations were studied and the proposed method was also applied satisfactorily to the determination of phosphate and silicate in detergents.     

Construction,analytical study and application of a new chloramine-t selective electrode

A chloramine-T (CAT) selective electrode with a liquid membrane of nickel batho-phenanthroline—chloramine-T dissolved in 2-nitro-p-cymene is described. The liquid membrane electrode exhibits rapid and near Nernstian response to chloramine-T activity from 10^-1 to 10^-4 M. The response is unaffected by pH in the range 5–9. Major interferences are penodate and perchlorate. In analytical applications, direct potentiometnc methods for the determination of chloramme-T, ascorbic acid, and arsenic(III), and a titnmetric method for ascorbic acid are described. Ascorbic acid and arsenic(IU) in the ranges 0.4–40 and 0.5–2 mg, respectively, can be determined with relative errors of 1–2%. The method has been applied to the determination of ascorbic acid in pharmaceutical preparations.     

Use of a continuous flow solid-phase spectroscopic sensor using two sensing zones: determination of thiamine and ascorbic acid

A simple, rapid, inexpensive, and automated flow-through solid-phase spectroscopic sensing device is proposed for the sequential determination of 2 vitamins: thiamine and ascorbic acid. The vitamins are concentrated on ion-exchange gels, thiamine on Sephadex SP C-25, and ascorbic acid on Sephadex QAE A-25; both solid supports are packed in 2 different flow cells. The absorbance is monitored directly on the solid phase with a double-beam spectrophotometer at 250 nm, without derivatization or additional elution. With the use of 2 carrier/self-eluting solutions (0.1 5M sodium acetate/acetic acid and 0.18M citric acid/K2HPO4) and a sample volume of 1000 microL, the sensor responds linearly in the range of 0.5-15 and 3-50 microg/mL with detection limits of 0.14 and 0.36 microg/mL for thiamine and ascorbic acid, respectively. When the method was applied to synthetic samples and pharmaceutical preparations, precise and accurate values were obtained.     

A potentiometric rhodamine-B based membrane sensor for the selective determination of chromium ions in wastewater.

The construction and performance characteristics of a novel chromate ion-selective membrane sensor are described and used for determining chromium(III) and chromium(VI) ions. The sensor is based on the use of a rhodamine-B chromate ion-associate complex as an electroactive material in a poly(vinyl chloride) membrane plasticized with o-nitrophenyloctyl ether as a solvent mediator. In a phosphate buffer solution of pH 6 - 7, the sensor displays a stable, reproducible and linear potential response over the concentration range of 1 x 10(-1) - 5 x 10(-6) mol l(-1) with an anionic Nernstian slope of 30.8 +/- 0.5 mV decade(-1) and a detection limit of 1 x 10(-6) mol l(-1) Cr(VI). High selectivity for Cr(VI) is offered over many common anions (e.g., I-, Br-, Cl-, IO4-, CN-, acetate, oxalate, citrate, sulfate, phosphate, thiosulfate, selenite, nitrate) and cations (e.g., Ag+, Ca2+, Sr2+, Co2+, Ni2+, Cu2+, Mn2+, Fe2+, Zn2+, Cd2+, Al3+, Cr3+). The sensor is used for determining Cr(VI) and/or Cr(III) ions in separate or mixed solutions after the oxidation of Cr(III) into Cr(VI) with H2O2. As low as 0.2 microg ml(-1) of chromium is determined with a precision of +/-1.2%. The chromium contents of some wastewater samples were accurately assessed, and the results agreed fairly well with data obtained by atomic absorption spectrometry.     

Optimization of a chemical modifier in the determination of selenium by graphite furnace atomic absorption spectrometry and its application to wheat and wheat flour analysis.

A method for the determination of total selenium in wheat and wheat flour using graphite furnace atomic absorption spectrometry (GFAAS) with palladium/ascorbic acid as a chemical modifier was studied. The effects of nickel nitrate, palladium/ascorbic acid, and palladium/magnesium nitrate as chemical modifiers on the sensitivity in the determination of selenite, selenate and selenomethionine by GFAAS were compared. The palladium/ascorbic acid modifier was used for the determination of total selenium in wheat and wheat flour, because the oxidation states of the selenium ion are not important in the determination. The detection limit was estimated to be 1 microg L(-1) (calculated as 3sigma of the blank); the calibration curve was linear for the concentration range 5 - 50 microg L(-1) and the recovery range was 96.66 - 101.80%. The optimal ashing and atomizing temperatures were 1300 degrees C and 2250 degrees C, respectively. The proposed method was successfully applied to the determination of total selenium in wheat and wheat flour.     

Spectrophotometric determination of trace sulphate in rain and snow after preconcentration with 2-aminoperimidine on a membrane filter

A simple and precise preconcentration technique, based on collecting a precipitate on a membrane filter and dissolving the filter and precipitate in an organic solvent, has been applied to the spectrophotometric determination of trace sulphate in rain and snow. The sulphate is precipitated with 2-aminoperimidine and the resulting compound is dissolved in nitric acid, made alkaline with sodium hydroxide and then adsorbed on tetradecyldimethylbenzylammonium nitrate. The precipitate is then collected on a membrane filter and both precipitate and filter are dissolved in dimethylsulphoxide (DMSO). The absorbance of the DMSO solution is measured at 550 nm against a reagent blank. The molar absorptivity is 2.1 x 10(4) 1 . mole(-1) . cm(-1) and the coefficient of variation for six measurements is < 1.5%. The detection limit (S/N = 3) is 0.06 mug of sulphate in 5 ml of sample solution.     

Oxidation of thioglycolate by [Os(phen)3]3+: an unusual example of redox-mediated aromatic substitution

The aqueous oxidation of thioglycolic acid (TGA) by [Os(phen)(3)](3+) (phen = 1,10-phenanthroline) is catalyzed by traces of ubiquitous Cu(2+) and inhibited by the product [Os(phen)(3)](2+). In the presence of dipicolinic acid (dipic), which thoroughly masks trace Cu(2+) catalysis, and spin trap PBN, the kinetics under anaerobic conditions have been studied in the pH range 1.82-7.32. The rate law is -d[Os(phen)(3)(3+)]/dt = k[TGA](tot)[Os(phen)(3)(3+)], with k = 2{(k(b)K(a1) + k(c)K(a1)K(i))[H(+)] + k(d)K(a1)K(a2)}/{[H(+)](2) + K(a1)[H(+)] + K(a1)K(a2)}; K(a1) and K(a2) are the successive acid dissociation constants of TGA, and K(i) is the tautomerization constant of two TGA monoanions. k(b) + k(c)K(i) = (5.9 +/- 0.3) x 10(3) M(-)(1) s(-)(1), k(d) = (1.6 +/- 0.1) x 10(9) M(-)(1) s(-)(1) at mu = 0.1 M (NaCF(3)SO(3)) and 25 degrees C. The major products in the absence of spin traps are dithiodiglycolic acid, [Os(phen)(3)](2+), and [Os(phen)(2)(phen-tga)](2+), where phen-tga is phenanthroline with a TGA substituent. A mechanism is proposed in which neutral TGA is unreactive, the (minor) thiolate form of the TGA monoanion undergoes one-electron oxidation by [Os(phen)(3)](3+) (k(c)), and the dianion of TGA likewise undergoes one-electron oxidation by [Os(phen)(3)](3+) (k(d)). The Marcus cross relationship provides a good account for the magnitude of k(d) in this and related reactions of TGA. [Os(phen)(2)(phen-tga)](2+) is suggested to arise from a post-rate-limiting step involving attack of the TGA(*) radical on [Os(phen)(3)](3+).     

聚乙烯醇/酸化碳纳米管高亲水性三维孔电极膜的制备与电化学性能

在酸化碳纳米管的基础上, 采用电泳沉积和冷冻-解冻循环交联工艺制备了高亲水性聚乙烯醇/酸化碳纳米管(PVA/a-MWCNTs)水凝胶电极膜. 该电极膜具有三维连通纳米孔结构, 同时还具有高电活性面积、 低表面电荷传递电阻以及良好的扩散通透性等电化学特性. 该电极膜对多巴胺(DA)有很好的电化学响应特性, 并且对多巴胺的电化学还原电流不受抗坏血酸(AA)干扰, 在过量抗坏血酸存在下, PVA/a-MMWCNTs水凝胶电极膜对多巴胺还原电流的一阶导数与多巴胺的浓度在2×10^-6 ~2×10^-3 mol/L范围内呈线性关系, 检出限达到1×10^-6 mol/L, 灵敏度达到12.3 μA/(mmol·L^-1), 同时还表现出了较好的电极稳定性和重现性.