Length-dependent optical effects in single walled carbon nanotubes

Recently, Heller et al. reported length-dependent effects on the relative photoluminescence (PL) quantum yield of single walled carbon nanotubes (SWNTs) [Heller et al J. Am. Chem. Soc. 2004, 126, 14567-14573]. We propose a simple model involving thermal diffusion of excitons along the nanotube axis and quenching at the ends, to explain the observed trend in their data. By fitting to our model, we extract a diffusion coefficient of 6 cm(2)/s for excitons in SWNTs. Assuming a mono exponential decay of exciton PL, we also predict that effective length-dependent PL lifetimes for these excitons lie in the range of 1-27 ps. Experimental observations are shown to be consistent with stochastic rather than wavepacket-like exciton migration, which is in agreement with ultrafast excitonic dephasing. Edge effects seem to limit the use of short SWNTs in imaging and optical sensing applications.     

Optical properties of ultrashort semiconducting single-walled carbon nanotube capsules down to sub-10 nm

Single-walled carbon nanotubes (SWNTs) are typically long (greater than or approximately equal 100 nm) and have been well established as novel quasi one-dimensional systems with interesting electrical, mechanical, and optical properties. Here, quasi zero-dimensional SWNTs with finite lengths down to the molecular scale (7.5 nm in average) were obtained by length separation using a density gradient ultracentrifugation method. Different sedimentation rates of nanotubes with different lengths in a density gradient were taken advantage of to sort SWNTs according to length. Optical experiments on the SWNT fractions revealed that the UV-vis-NIR absorption and photoluminescence peaks of the ultrashort SWNTs blue-shift up to approximately 30 meV compared to long nanotubes, owing to quantum confinement effects along the length of ultrashort SWNTs. These nanotube capsules essentially correspond to SWNT quantum dots.     

Carbon nanotubes in benzene: internal and external solvation

The structure and dynamics of benzene inside and outside of single-walled carbon nanotubes (SWNTs) in the (n,n) armchair configuration are studied via molecular dynamics computer simulations. Irrespective of the nanotube diameter, benzene molecules form cylindrical solvation shell structures on the outside of the nanotubes. Their molecular planes near the SWNTs in the first external solvation shell are oriented parallel to the nanotube surface, forming a π-stacked structure between the two. By contrast, the benzene distributions in the interior of the SWNTs are found to vary markedly with the nanotube diameter. In the case of the (7,7) and (8,8) nanotubes, internal benzene forms a single-file distribution, either in a vertex-to-vertex (n = 7) or face-to-face (n = 8) orientation between two neighboring molecules. Inside a slightly wider (9,9) nanotube channel, however, a cylindrical single-shell distribution of benzene arises. A secondary solvation structure, which begins to appear inside (10,10), develops into a full structure separate from the first internal solvation shell in (12,12). The ring orientation of internal benzene is generally parallel to the nanotube wall for n = 9-12, while it becomes either slanted with respect to (n = 7), or perpendicular to (n = 8), the nanotube axis. The confinement inside the small nanotube pores exerts a strong influence on the dynamics of benzene. Both translational and rotational dynamics inside SWNTs are slower and more anisotropic than in liquid benzene. It is also found that reorientational dynamics of internal benzene deviate dramatically from the rotational diffusion regime and change substantially with the nanotube diameter.     

Quantum dot solar cells. Tuning photoresponse through size and shape control of CdSe-TiO2 architecture

Different-sized CdSe quantum dots have been assembled on TiO2 films composed of particle and nanotube morphologies using a bifunctional linker molecule. Upon band-gap excitation, CdSe quantum dots inject electrons into TiO2 nanoparticles and nanotubes, thus enabling the generation of photocurrent in a photoelectrochemical solar cell. The results presented in this study highlight two major findings: (i) ability to tune the photoelectrochemical response and photoconversion efficiency via size control of CdSe quantum dots and (ii) improvement in the photoconversion efficiency by facilitating the charge transport through TiO2 nanotube architecture. The maximum IPCE (photon-to-charge carrier generation efficiency) obtained with 3 nm diameter CdSe nanoparticles was 35% for particulate TiO2 and 45% for tubular TiO2 morphology. The maximum IPCE observed at the excitonic band increases with decreasing particle size, whereas the shift in the conduction band to more negative potentials increases the driving force and favors fast electron injection. The maximum power-conversion efficiency 相似文献   

Light-controlled single-walled carbon nanotube dispersions in aqueous solution

We have succeeded in dispersing single-walled carbon nanotubes (SWNTs) into an aqueous solution of poly(ethylene glycol)-terminated malachite green derivative (PEG-MG) through simple sonication. It was found that UV exposure caused reaggregation of these predispersed SWNTs in the same aqueous medium, as adsorbed PEG-MG photochromic chains could be effectively photocleavaged from the nanotube surface. The observed light-controlled dispersion and reaggragation of SWNTs in the aqueous solution should facilitate the development of SWNT dispersions with a controllable dispersity for potential applications.     

Toward highly efficient CdS/CdSe quantum dots-sensitized solar cells incorporating ordered photoanodes on transparent conductive substrates

A series of ordered photoanodic architectures (including ordered TiO(2) nanotube arrays (TNT), ZnO nanorods, ZnO/TiO(2) core/shell nanostructures) for CdS/CdSe sensitized solar cells (QDSCs), were fabricated directly on transparent conductive oxide glasses by a facile sol-gel assisted template process. The morphologies, optical and electrical properties of TNTs and CdS/CdSe co-sensitized TNTs have been demonstrated. The effect of CdSe deposition time on the cell performance was clarified, and the growth mechanism of the CdSe quantum dots on the surface of the TNTs has been proposed as well. Furthermore, the evolution of open-circuit photovoltage (V(oc)) towards CdSe deposition time has been investigated by electrochemical impedance spectroscopy (EIS). A promising light-to-electricity conversion efficiency of up to 4.61% has been achieved with 3 μm long TNT arrays, which is the best record for sandwich-type ordered TNT-based QDSCs.     

An effective oxidation route to blue emission CdSe quantum dots

Nearly monodisperse CdSe quantum dots with blue emission are obtained through an oxidation approach, in which CdSe particles can be etched into smaller ones. During the oxidation process, CdSe with yellow emission (546 nm) can be rapidly oxidized to blue emission (466 nm) due to its incompletely crystallized structure. Further oxidation results in the slow blue-shift of the photoluminescence peak to 433nm. The quantum fluorescence efficiency of CdSe with blue emission is about 10%, and surface-trap emission becomes evident when the PL peak of CdSe reaches the blue-violet region, since the surface atom ratio increases. This oxidation route offers a simple and mild way to get extremely small CdSe quantum dots.     

水溶性CdSe/CdS量子点的合成及其与牛血清蛋白的共轭作用

用巯基乙酸(TGA)作为稳定剂，合成了水溶性的CdSe和核壳结构的CdSe/CdS半导体量子点。吸收光谱和荧光光谱研究表明，核壳结构的CdSe/CdS半导体量子点比单一的CdSe量子点具有更优异的发光特性。用TEM、电子衍射(ED)和XPS分别表征了CdSe和CdSe/CdS纳米微粒的结构、形貌及分散性。红外光谱和核磁共振谱证实了巯基乙酸分子中的硫原子和氧原子与纳米微粒表面的金属离子发生了配位作用。在pH值为7.4的条件下，将合成的CdSe和CdSe/CdS量子点直接与牛血清白蛋白(BSA)相互作用。实验发现，两种量子点均对BSA的荧光产生较强的静态猝灭作用；而BSA对两种量子点的荧光则具有显著的荧光增敏作用，存在BSA时CdSe/CdS量子点的荧光增强是不存在BSA时体系荧光强度的3倍。     

Rational chemical strategies for carbon nanotube functionalization

Whereas the chemistry of fullerenes is well-established, the chemistry of single-walled carbon nanotubes (SWNTs) is a relatively unexplored field of research. Investigations into the bonding of moieties onto SWNTs are important because they provide fundamental structural insight into how nanoscale interactions occur. Hence, understanding SWNT chemistry becomes critical to rational, predictive manipulation of their properties. Among the strategies discussed include molecular metal complexation with SWNTs to control site-selective chemistry in these systems. In particular, work has been performed with Vaska's and Wilkinson's complexes to create functionalized adducts. Functionalization should offer a relatively simple means of tube solubilization and bundle exfoliation, and also allows for tubes to be utilized as recoverable catalyst supports. Solubilization of oxidized SWNTs has also been achieved through derivatization by using a functionalized organic crown ether. The resultant adduct yielded concentrations of dissolved nanotubes on the order of 1 g L(-1) in water and at elevated concentrations in a range of organic solvents, traditionally poor for SWNT manipulation. To further demonstrate chemical processability of SWNTs, we have subjected them to ozonolysis, followed by treatment with various independent reagents, to rationally generate a higher proportion of oxygenated functional groups on the nanotube surface. This protocol has been found to purify nanotubes. More importantly, the reaction sequence has been found to ozonize the sidewalls of these nanotubes. Finally, SWNTs have also been chemically modified with quantum dots and oxide nanocrystals. A composite heterostructure consisting of nanotubes joined to nanocrystals offers a unique opportunity to obtain desired physical, electronic, and chemical properties by adjusting synthetic conditions to tailor the size and structure of the individual sub-components, with implications for self-assembly.     

Luminescence polarization spectroscopy study of functionalized carbon nanotubes in a polymeric matrix

Single-walled carbon nanotubes (SWNTs) were well-functionalized for a study of their defect-derived luminescence properties. The soluble nanotube sample was homogeneously dispersed in poly(vinyl alcohol) (PVA) films via solution-phase mixing and then wet-casting. The PVA films embedded with the functionalized SWNTs were strongly luminescent according to spectroscopic and confocal microscopic results. The luminescence from the films was highly polarized, with the observed anisotropy value approaching the limit for collinear absorption and emission dipole moments. The films were mechanically stretched to align the embedded nanotubes, and results from luminescence measurements of the stretched films suggested that the excitation was strongly in favor of the direction along the nanotube axis. Mechanistic implications of the polarization spectroscopy results for the luminescent functionalized nanotubes in the polymeric matrix with and without the mechanic alignment are discussed.     

Size/shape-controlled synthesis of colloidal CdSe quantum disks: ligand and temperature effects

Size/shape-controlled colloidal CdSe quantum disks with zinc-blende (cubic) crystal structure were synthesized using air-stable and generic starting materials. The colloidal CdSe quantum disks were approximately square, and their lateral dimensions were varied between 20 and 100 nm with the thickness controlled between 1 and 3 nm, which resulted in sharp and blue-shifted UV-vis and PL peaks due to one-dimensional quantum confinement. The quantum disks were grown with either <001> or <111> direction, polar directions in the single crystalline disks, as the short axis, and both basal planes were terminated with Cd ions. These surface Cd ions were passivated with negatively charged fatty acid ligands to neutralize the net positive charges caused by the excess monolayer of Cd ions. The coordination of the Cd ions and carboxylate groups further enabled the close-packing monolayer of fatty acid ligands on each basal plane. The close packing of the hydrocarbon chains of fatty acids dictated the up temperature limit for synthesis of the colloidal quantum disks, and the low temperature limit was found to be related to the reactivity of the starting materials. Overall, a high Cd to Se precursor ratio, negative-charged fatty acid ligands with a long hydrocarbon chain, and a proper temperature range (approximately between 140 and 250 °C) were found to be needed for successful synthesis of the colloidal CdSe quantum disks.     

A Semiempirical Study of Carbon Nanotubes with Finite Tubular Length and Various Tubular Diameters

A semiempirical PM3 quantum computational method has been used to generate the electronic and optimized geometrical structure of SWNT of zigzag and armchair types. We shed light on the electronic structures of SWNT with various diameters and lengths of the tube. Particularly, the calculated HOMO, LUMO and band‐gap of SWNT are not monotonic but exhibit a well‐defined oscillation, which depends on the tubular diameter and the tubular length. Calculated HOMO, LUMO and band‐gap of the zigzag SWNTs have oscillated with tubular diameter as they contain an odd or even number of benzenoids in the circular plane of the carbon nanotube. The zigzag SWNTs with an odd number of benzenoids have a higher band‐gap than those of SWNTs with an even number of benzenoids in the circular plane of the carbon nanotube. Calculated results also reveal that the tubular length in the zigzag SWNTs influences the band‐gaps very little. For the armchair SWNT, calculated HOMO, LUMO and band‐gap contained the oscillate depending on the number of carbon sections in the tubular length axis. Their repeat sections are 3n‐1, 3n and 3n+1. The armchair SWNT with 3n+1 sections has a high band‐gap while the SWNTs with 3n‐1 sections have a low band‐gap. The tubular diameters of armchair SWNT influence the HOMO, LUMO and band gap very little.     

Catalytic polymerization and facile grafting of poly(furfuryl alcohol) to single-wall carbon nanotube: preparation of nanocomposite carbon

A nanocomposite carbon was prepared by grafting a carbonizable polymer, poly(furfuryl alcohol) (PFA), to a single-wall carbon nanotube (SWNT). The SWNT was first functionalized with arylsulfonic acid groups on the sidewall via a method using a diazonium reagent. Both Raman and FTIR spectroscopies were used to identify the functional groups on the nanotube surface. HRTEM imaging shows that the SWNT bundles are exfoliated after functionalization. Once this state of the SWNTs was accomplished, the PFA-functionalized SWNT (PFA-SWNT) was prepared by in situ polymerization of furfuryl alcohol (FA). The sulfonic acid groups on the surface of the SWNT acted as a catalyst for FA polymerization, and the resulting PFA then grafted to the SWNTs. The surfaces of the SWNTs converted from hydrophilic to hydrophobic when they were wrapped with PFA. The formation of the polymer and the attraction between it and the sulfonic acid groups were confirmed by IR spectra. A nanocomposite carbon was generated by heating the PFA-SWNT in argon at 600 degrees C, a process during which the PFA was transformed to nanoporous carbon (NPC) and the sulfonic acid groups were cleaved from the SWNT. Based upon the Raman spectra and HRTEM images of the composite, it is concluded that SWNTs survive this process and a continuous phase is formed between the NPC and the SWNT.     

Cellulose Nanocrystal-Assisted Dispersion of Luminescent Single-Walled Carbon Nanotubes for Layer-by-Layer Assembled Hybrid Thin Films

Highly stable single-walled carbon nanotube (SWNT) dispersions are obtained after ultrasonication in cellulose nanocrystal (CN) aqueous colloidal suspensions. Mild dispersion conditions were applied to preserve the SWNT length in order to facilitate the identification of hybrid objects. This led to a moderate dispersion of 24% of the SWNTs. Under these conditions, atomic force microscopy (AFM) and transmission electron microscopy (TEM) experiments succeeded in demonstrating the formation of hybrid particles in which CNs are aligned along the nanotube axis by a self-assembly process. These SWNT/CN dispersions are used to create multilayered thin films with the layer-by-layer method using polyallylamine hydrochloride as a polyelectrolyte. Homogeneous films from one to eight bilayers are obtained with an average bilayer thickness of 17 nm. The presence of SWNTs in each bilayer is attested to by characteristic Raman signals. It should be noted that these films exhibit a near-infrared luminescence signal due to isolated and well-separated nanotubes. Furthermore, scanning electron microscopy (SEM) suggests that the SWNT network is percolating through the film.     

Photoassisted synthesis of CdSe and core-shell CdSe/CdS quantum dots

This paper describes the synthesis of core-shell CdSe/CdS quantum dots (QDs) in aqueous solution by a simple photoassisted method. CdSe was prepared from cadmium nitrate and 1,1-dimethylselenourea precursors under illumination for up to 3 h using a pulsed Nd:YAG laser at 532 nm. The effects that the temperature and the laser irradiation process have on the synthesis of CdSe were monitored by a series of experiments using the precursors at a Cd:Se concentration ratio of 4. Upon increasing the temperature (80-140 degrees C), the size of the CdSe QDs increases and the time required for reaching a maximum photoluminescence (PL) is shortened. Although the as-prepared CdSe QDs possess greater quantum yields (up to 0.072%) compared to those obtained by microwave heating (0.016%), they still fluoresce only weakly. After passivation of CdSe (prepared at 80 degrees C) by CdS using thioacetamide as the S source (Se:S concentration ratio of 1) at 80 degrees C for 24 h, the quantum yield of the core-shell CdSe/CdS QDs at 603 nm is 2.4%. Under UV irradiation of CdSe/CdS for 24 h using a 100-W Hg-Xe lamp, the maximum quantum yield of the stable QDs is 60% at 589 nm. A small bandwidth (W1/2 < 35 nm) indicates the narrow size distribution of the as-prepared core-shell CdSe/CdS QDs. This simple photoassisted method also allows the preparation of differently sized (3.7-6.3-nm diameters) core-shell CdSe/CdS QDs that emit in a wide range (from green to red) when excited at 480 nm.     

Effects of ionic surfactant adsorption on single-walled carbon nanotube thin film devices in aqueous solutions

Field-effect transistors were fabricated using high-density single-walled carbon nanotube (SWNT) thin films directly grown on suitable substrates. Such approach eliminated the variations of device behaviors in individual SWNT devices by utilizing a large number of SWNTs in each device. We have found that the behaviors of such devices are closely related to the surface charge densities around SWNTs in aqueous solutions. Adsorption of ionic surfactants on the surface could significantly modulate the device characteristics, which could be detected by measuring the conductance of the devices. The devices could be tuned to be sensitive to either anionic or cationic surfactants by tailoring the surface properties of SiO(2) substrates around SWNTs. This effect could be potentially used to design chemical and biological sensors.     

Immobilizing shortened single-walled carbon nanotubes (SWNTs) on gold using a surface condensation method

We propose a surface condensation method for assembling single-walled carbon nanotubes (SWNTs) on gold. The as-prepared long and randomly tangled SWNTs were cut into short pipes by chemical oxidation, allowing the nanotubes to be terminated by carboxyl functionalities. A surface condensation reaction was then performed by immersing an amino self-assembled monolayer (SAM)-modified gold substrate into the dimethylformamide suspension of carboxylic nanotubes with the aid of dicyclohexylcarbodiimide condensation agent. Raman spectroscopy and atomic force microscopy (AFM) results show that a highly aligned assembly of SWNTs has been formed on gold, with the nanotubes standing on the surface stable enough for a long ultrasonication. In combination with the microcontact printing (muCP) technique, we have fabricated patterned nanotube assemblies using this surface condensation method. Moreover, we found that the "giant" carbon nanotubes tend to form bundles on an amino-terminating surface, likely following a nucleation-growth model.     

表面配体对CdSe量子点发光性质的影响

本文采用热注入法合成了以油胺/油酸为表面配体的、粒径均一的CdSe量子点(CdSe QDs)。调节表面配体交换中辛硫醇与CdSe QDs的比例,研究了表面配体对CdSe QDs光致发光及电致化学发光性质的影响,并提出了CdSe QDs的发光模型。结果表明,辛硫醇表面配体显著影响CdSe QDs的带边发射和深能级陷阱发射,因而导致CdSe QDs光致发光强度的显著降低,以及电致化学发光强度的增加。上述结果为进一步提高量子点的发光性能提供了依据。     

A dispersion-corrected density functional theory study of the noncovalent interactions between nucleobases and carbon nanotube models containing stone–wales defects

The noncovalent bonding between nucleobases (NBs) and Stone–Wales (SW) defect-containing closed-end single-walled carbon nanotubes (SWNTs) was theoretically studied in the framework of density function theory using a dispersion-corrected functional PBE-G06/DNP. The models employed in this study were armchair nanotube (ANT) (5,5) and zigzag nanotube (ZNT) (10,0), which incorporated SW defects in different orientations. In one of them, the (7,7) junction is tilted with respect to SWNT axis (ANT-t and ZNT-t), whereas in ANT-p and ZNT-p models the (7,7) junction is parallel and perpendicular to the axis, respectively. The binding energies for uracil, thymine, cytosine, 5-methylcytosine, adenine, and guanine interacting with the defect-containing nanotube models were compared to the values previously obtained with the same calculation technique for the case of defect-free SWNTs, both in the gas phase (vacuum) and in aqueous medium. For most models, the interaction strength tends to be higher for purine than for pyrimidine complexes, with a clear exception of the systems including ZNT-p, both in vacuum and in aqueous medium. As it could be expected, the binding strength in the latter case is lower as compared to that in vacuum, roughly by 2–4 kcal/mol, due to the implicit inclusion of a medium (i.e., water) via the conductor-like screening model model. The closest contacts between NBs and SWNT models, frontier orbital distribution, and highest-occupied molecular orbital–lowest-unoccupied molecular orbital gap energies are analyzed as well. © 2019 Wiley Periodicals, Inc.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.