Synthesis and properties of phosphorus-tungsten heteropolyacid H6P2W21O71

An electromembrane method has been proposed for the synthesis of H₆P₂W₂₁O₇₁, its resistance to heat in the solid state has been studied, and the Hammett acidity functions of concentrated aqueous solutions measured.Institute of Chemistry and Chemical Technology, Siberian Branch, Russian Academy of Sciences, Krasnoyarsk 660049. Institute of Catalysis, Siberian Branch, Russian Academy of Sciences, Novosibirsk 630090. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 494–497, March, 1992.     

静电纺丝结合溶胶-凝胶法制备MgNb2O6陶瓷纤维

以五氧化二铌(Nb2O5)和氧化镁(MgO)为原料,柠檬酸作配位剂,采用静电纺丝结合溶胶-凝胶法制备了铌酸镁(MgNb2O6)陶瓷纤维。在本合成体系中,高质量Nb5+溶液的获得是形成MgNb2O6前驱体溶胶的关键步骤。通过TGA,FTIR,XRD,TEM以及SEM技术对纤维的形貌,微观结构以及组成进行了表征。结果表明,900℃烧结以后得到的MgNb2O6纤维长度约为10 cm,具有中空结构,壁厚约为800 nm。     

氧化铜纳米片的水热合成与表征

利用水热法一步制备了形貌均一的氧化铜纳米片,借助场发射扫描电子显微镜、X射线粉末衍射仪和透射电子显微镜分析了产物的形貌和晶体结构;并研究了反应物浓度及表面活性剂等因素对氧化铜纳米结构的影响.结果表明,以氢氧化钠作为碱源时,在不添加任何表面活性剂的情况下,随着氢氧化钠浓度的升高,纳米片的尺寸减小、厚度增大;此外,通过添加不同的表面活性剂可以得到不同形貌的氧化铜纳米结构.     

Synthesis of magnetic nickel spinel ferrite nanospheres by a reverse emulsion-assisted hydrothermal process

Nickel ferrite nanospheres were successfully synthesized by a reverse emulsion-assisted hydrothermal method. The reverse emulsion was composed of water, cetyltrimethyl ammonium bromide, polyoxyethylene(10)nonyl phenyl ether, iso-amyl alcohol and hexane. During the hydrothermal process, β-FeO(OH) and Ni_0.75Fe_0.25(CO₃)_0.125(OH)₂·0.38H₂O (INCHH) nanorods formed first and then transformed into nickel spinel ferrite nanospheres. The phase transformation mechanism is proposed based on the results of X-ray powder diffraction, transmission electron microscopy and energy-dispersive X-ray spectroscopy, etc. Nickel ferrite may form at the end of the INCHH nanorods or from the solution accompanied by the dissolution of β-FeO(OH) and INCHH nanorods. The X-ray photoelectron spectroscopy analysis shows that a few Fe³⁺ ions have been reduced to Fe²⁺ ions during the formation of nickel ferrite. The maximum magnetization of the nickel ferrite nanospheres obtained after hydrothermal reaction for 30 h is 55.01 emu/g, which is close to that of bulk NiFe₂O₄.     

前驱体法制备Mn_2O_3空心橄榄形结构及形貌演化

利用苹果酸还原高锰酸钾以水热合成方法制备了具有橄榄形貌的纳米结构MnCO3前驱体,通过600℃焙烧MnCO3前驱体得到橄榄形Mn2O3.以扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、热重-差热分析(TG-DTA)等方法对产物的形貌和结构进行了表征.考察了MnCO3前驱体微观形貌随水热反应时间的演变:当水热反应时间为2h时得到具有橄榄形形貌的MnCO3前驱体,空心结构的壁比较厚;当水热反应时间延长到6h时得到的MnCO3前驱体仍然具有橄榄形形貌,壁变薄;当反应时间延长到24h时得到的MnCO3前驱体仍然具有橄榄形形貌,并且壁非常薄.我们推测在Ostwald熟化机理作用下,空心橄榄形MnCO3前驱体随着反应时间的延长其壁逐渐由160nm演化为30nm.     

Phase equilibria in the solid state in the V9Mo6O40-Cr2O3 system

Phase equilibria have been established in the solid state in the V₉Mo₆O₄₀-Cr₂O₃ system. The results obtained have permitted to state that the system of interest, in the subsolidus area, is not a real two-component system in the whole component concentration range.

---

Zusammenfassung Im Festzustand des Systemes V₉Mo₆O₄₀-Cr₂O₃ wurden Phasengleichgewichte ermittelt. Die erhaltenen Resultate lassen darauf schließen, daß das fragliche System im Subsolidus-Gebiet über den gesamten Konzentrationsbereich kein reelles Zweikomponentensystem ist.

     

A series of spinel phase cathode materials prepared by a simple hydrothermal process for rechargeable lithium batteries

A series of spinel-structured materials have been prepared by a simple hydrothermal procedure in an aqueous medium. The new synthetic method is time and energy saving i.e., no further thermal treatment and extended grinding. The main experimental process involved the insertion of lithium into electrolytic manganese dioxide with glucose as a mild reductant in an autoclave. Both the hydrothermal temperature and the presence of glucose play the critical roles in determining the final spinel integrity. Particular electrochemical performance has also been systematically explored, and the results show that Al³⁺, F⁻ co-substituted spinels have the best combination of initial capacity and capacity retention among all these samples, exhibited the initial capacity of 115 mAh/g and maintained more than 90% of the initial value at the 50th cycle.     

Br~-掺杂Bi_2WO_6的水热法合成及其可见光催化性能

以Bi(NO_3)_3·5H_2O和Na_2WO_4·2H_2O为主要原料,采用水热法合成了纯相Bi_2WO_6,并对其进行非金属离子Br-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br~-掺杂对Bi_2WO_6的物相结构、形貌和可见光催化性能的影响。结果表明,Br-掺杂可有效提高Bi_2WO_6的可见光催化性能,当掺杂量(物质的量百分数)为8%时,溴掺杂Bi_2WO_6的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi_2WO_6相比,其降解率提高了36.32%。     

Br-掺杂Bi2WO6的水热法合成及其可见光催化性能

以Bi（NO₃）₃·5H₂O和Na₂WO₄·2H₂O为主要原料,采用水热法合成了纯相Bi₂WO₆,并对其进行非金属离子Br^-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br^-掺杂对Bi₂WO₆的物相结构、形貌和可见光催化性能的影响。结果表明,Br^-掺杂可有效提高Bi₂WO₆的可见光催化性能,当掺杂量（物质的量百分数）为8%时,溴掺杂Bi₂WO₆的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi₂WO₆相比,其降解率提高了36.32%。     

Gas-phase reactions in plasmas of SF6 with O2: Reactions of F with SOF2 and SO2 and reactions of O with SOF2

The plasma chemistry of SF₆/O₂ mixtures is particularly complicated because of the large number of possible reactions. Over a wide range of conditions, products including SF₄, SOF₄, SOF₂, and SO₂F₂ can be formed but thre is considerable uncertainty about the major reactions which contribute to the formation of these species. In this work reactions of oxygen atoms with SOF₂ and fluorine atoms with SOF₂ and SO₂ have been studied in order to determine the principal sources of SO₂F₂ in these plasmas. Reactions were studied at 295 K in a gas flow reactor sampled by a mass spectrometer. No reaction could be detected between oxygen atoms and SOF₂, which for the conditions employed, means that the upper limit for the reaction rate coefficient is 1×10^–14 cm³ sec^–1. The reaction of fluorine atoms with SOF₂ was studied with the helium bath gas number density ranging from 3.1×10¹⁶ to 2.0×10¹⁷ cm^–3. Within this range the rate coefficient increased with increasing [He] from (4.1 to 10.8)×10^–14 cm³ sec^–1. SO₂ was found to react with fluorine atoms with a rate coefficient which appeared to be independent of the helium bath gas number density over the range given above. The possibility that this reaction occurred entirely on the walls of the reactor is discussed.     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.     

A model for the etching of silicon in SF6/O2 plasmas

A model has been developed to describe the chemistry which occurs in SF₆/O₂ plasmas and the etching of silicon in these plasmas. Emphasis is placed nn the gas-phase free radical reactions, and the predictions n( the model are compared with experimental results. Forty-seven reactions are included, although a subset of 18 reactions describes the chemistry equally well. Agreement between the calculated and measured concentrations of stable products downstream of the plasma is better than a factor of 2. The need for additional kinetic data and fàr well-characterized diagnostic studies of SF₆/O₂ plasmas is discussed.     

Ba2SbInO6双钙钛矿的水热合成和表征

利用水热晶化法制备了Ba₂SbInO₆纯相，并通过XRD、SEM、IR、XPS和ICP等方法，对产物的物相、形貌、结构和组成进行了表征。初步结构表征结果表明，产物可能为B位离子无序排列的立方钙钛矿结构，空间群为Pm3m，晶胞参数为a=0.4132 mm。产物粉末呈现立方晶型，粒度约为0.5～2 μm。     

Synthesis and thermal decomposition of potassium peroxotitanate to K2Ti2O5

Potassium peroxotitanate was synthesized by the peroxo method. During the thermal decomposition K₂Ti₂O₅ can be obtained. The isothermal conditions for decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O were determined on the base of DTA, TG and DSC results. DTA and TG curves were recorded in the temperature range 20 and 900°C at a heating rate of 10°C min^–1. The obtained intermediate compounds were characterized by means of quantitative analysis and IR spectroscopy. The mechanism of thermal decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O to K₂Ti₂O₅ was studied. The optimal conditions for obtaining K₂Ti₂O₅ were determined (770°C for 10 h).     

Synthesis and characterization of phosphate-modified LiMn2O4 cathode materials for Li-ion battery

<正>LiMn_2O_4 spinel cathode materials were modified with 2 wt.%Li-M-PO_4(M=Co,Ni,Mn) by polyol synthesis method.The phosphate surface-modified LiMn_2O_4 cathode materials were physically characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDS).The charge-discharge test showed that the cycling and rate capacities of LiMn_2O_4 cathode materials were significantly enhanced by stabilizing the electrode surface with phosphate.     

Mn2O3纳米结构的简易合成与电化学性质

用简易的室温或水热方法制备出不同形貌的MnCO₃微结构。经600 ℃热处理后,室温制备MnCO₃转变成Mn₂O₃胶体片,而水热制备MnCO₃样品则形成多孔Mn₂O₃纳米结构。然而,室温制备MnCO₃经120 ℃热处理后形成Mn₂O₃晶相。制备样品经过XRD和SEM表征表明,热处理MnCO₃前驱物形成Mn₂O₃过程导致产物形貌与结构变化。其形成机理又通过TEM和FTIR进一步研究。Mn₂O₃纳米结构的电容性质通过循环伏安法表征,结果表明Mn₂O₃形貌与结构对其电容有重要影响。     

Synthesis and Thermal Stability of Zn4V2O9

A study of synthesis and thermal decomposition of the Zn₄V₂O₉ have been conducted by XRD method using a high-temperature X-ray attachment. A melting temperature and the way of melting that compound have been established. This revised version was published online in July 2006 with corrections to the Cover Date.     

Gas-phase reactions in plasmas of SF6 with O2 in He

Processes which occur in microwave discharges of dilute mixtures of SF₆ and O₂ in He have been examined using a flow reactor sampled by a mass spectrometer. Two classes of experiments were performed. In the first set of experiments, mixtures containing 6×10¹¹ cm^–3 SF₆, 6×10¹⁶ cm^–3 He, and O₂ in the range (0–3.6)×10¹³ cm^–3 were passed through a 20-W 2450-MHz microwave discharge. The gas mixtures arriving at a sample point downstream from the discharge were examined for SF₆, SF₄, SOF₂, SOF₄, SO₂F₂, SO₂, F, and O. In the second class of experiments, rate coefficients were measured for the reactions of SF₄ with O and O₂ and for the reaction of SF with O. The rate coefficient for the reaction of SF with O was found to be (4.2±1.5)×10^–11 cm^–3 s^–1. SF₄ was found to react so slowly with both oxygen atoms and oxygen molecules that only upper limits could be placed on the rate coefficients for these reactions. These values were 2×10^–14 cm³ s^–1 and 5×10^–15 cm³ s^–1 for reactions with O and O₂ respectively. The observed distribution of products from the discharged mixtures is discussed in terms of the measured rate coefficients.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Phase Equilibria in the Fe8V10W16O85-Fe2O3 and Fe8V10W16O85-Fe2WO6 Systems

Using DTA and X-ray phase diffraction methods, a diagram of phase equilibria established in two sections of a tricomponent oxide triangle Fe₂O₃-V₂O₅-WO₃was constructed, that is, in the sections: Fe₈V₁₀W₁₆O₈₅-Fe₂O₃and Fe₈V₁₀W₁₆O₈₅-Fe₂WO₆. This revised version was published online in July 2006 with corrections to the Cover Date.