The effect of the AlxGa1−xN/AIN buffer layer on the properties of GaN/Si(1 1 1) film grown by NH3-MBE

We describe the growth of GaN on Si(1 1 1) substrates with Al_xGa_1−xN/AlN buffer layer by ammonia gas source molecular beam epitaxy (NH₃-GSMBE). The influence of the AlN and Al_xGa_1−xN buffer layer thickness and the Al composition on the crack density of GaN has been investigated. It is found that the optimum thickness is 120 and 250 nm for AlN and Al_xGa_1−xN layers, respectively. The optimum Al composition is between 0.3<x<0.6.     

A study of the degree of relaxation of AlGaN epilayers on GaN template

The strain state of 570 nm Al_xGa_1−xN layers grown on 600 nm GaN template by metal organic chemical vapor deposition was studied using Rutherford backscattering (RBS)/channeling and triple-axis X-ray diffraction measurements. The results showed that the degree of relaxation (R) of Al_xGa_1−xN layers increased almost linearly when x0.42 and reached to 70% when x=0.42. Above 0.42, the value of R varied slowly and Al_xGa_1−xN layers almost full relaxed when x=1 (AlN). In this work the underlying GaN layer was in compressive strain, which resulted in the reduction of lattice misfit between GaN and Al_xGa_1−xN, and a 570 nm Al_xGa_1−xN layer with the composition of about 0.16 might be grown on GaN coherently from the extrapolation. The different shape of (0 0 0 4) diffraction peak was discussed to be related to the relaxation.     

Study on the Ce substitution effects of BiFeO3 films on ITO/glass substrates

Ce substituted Bi_1−xCe_xFeO₃ (BCFO) films with x=0–0.15 were deposited on indium tin oxide (ITO)/glass substrates by sol–gel process annealed at 500 °C. Rhombohedral phase was confirmed by XRD study and no impure phases were observed till x=0.15. Substantially enhanced ferroelectricity was observed at room temperature due to the substitution of Ce. In the films with x=0.05 and 0.10, the double remnant polarization are 75.5 and 57.7 μC/cm² at an applied field 860 kV/cm. Moreover, the breakdown field was enhanced in the films with Ce substitution.     

Anomalous temperature-dependent photoluminescence characteristic of as-grown GaInNAs/GaAs quantum well grown by solid source molecular beam epitaxy

The photoluminescence (PL) mechanisms of as-grown GaInNAs/GaAs quantum well were investigated by temperature-dependent PL measurements. An anomalous two-segmented trend in the PL peak energy vs. temperature curve was observed, which has higher and lower temperature-dependent characteristics at low temperature (5–80 K) and high temperature (above 80 K), respectively. The low and high-temperature segments were fitted with two separate Varshni fitting curves, namely Fit_low and Fit_high, respectively, as the low-temperature PL mechanism is dominated by localized PL transitions while the high-temperature PL mechanism is dominated by the e1–hh1 PL transition. Further investigation of the PL efficiency vs. 1/kT relationship suggests that the main localized state is located at 34 meV below the e1 state. It is also found that the temperature (80 K) at which the PL full-width at half-maximum changes from linear trend to almost constant trend correlates well with the temperature at which the PL peak energy vs. temperature curve changes from Fit_low to Fit_high.     

Synthesis of Y2O3:Eu phosphors by bicontinuous cubic phase process

A novel approach for preparation of red-emitting europium-doped yttrium oxide phosphor (Y₂O₃:Eu) by using the bicontinuous cubic phase (BCP) process was reported in this paper. The BCP system was composed of anionic surfactant sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and aqueous yttrium nitrate/europium nitrate solution. Energy dispersive spectrometer analysis revealed the homogeneous precipitation occurred in the BCP structure. Thermogravimetric analysis measurements indicated the precursor powder was europium-doped yttrium hydroxide, Y_1−xEu_x(OH)₃. Scanning electron microscopy micrographs showed the precursor powder had a primary size about 30 nm and narrow size distribution. After heat treatment in furnace above 700 °C for 4 h, high crystallinity Y₂O₃:Eu phosphors was obtained. However, the primary size of particles grew to 50–200 nm and the dense agglomerates with a size below 1 μm were formed. X-ray diffraction patterns indicated the crystal structure of precursor powders and Y₂O₃:Eu phosphors were amorphous and body-centered cubic structure, respectively. The photoluminescence analysis showed that the obtained Y₂O₃:Eu phosphor had a strong red emitting at 612 nm and the quenching started at a Eu concentration of 10 mol%. This study indicated that the BCP process could be used to prepare the highly efficient oxide-based phosphors.     

High intense UV-luminescence of nanocrystalline ZnO thin films prepared by thermal oxidation of ZnS thin films

High quality zinc oxide (ZnO) films were obtained by thermal oxidation of high quality ZnS films. The ZnS films were deposited on a Si substrate by a low-pressure metalorganic chemical vapor deposition technique. X-ray diffraction spectra indicate that high quality ZnO films possessing a polycrystalline hexagonal wurtzite structure with preferred orientation of (0 0 2) were obtained. A fourth order LO Raman scattering was observed in the films. In photoluminescence (PL) measurements, a strong PL with a full-width at half-maximum of 10 nm around 380 nm was obtained for the samples annealed at 900°C at room temperature. The maximum PL intensity ratio of the UV emission to the deep-level emission is 28 at room temperature, providing evidence of the high quality of the nanocrystalline ZnO films.     

Strong and stable red photoluminescence from porous silicon prepared by Fe-contaminated silicon

Strong red photoluminescence (PL) spectra appeared at porous silicon (PS) samples prepared by a chemical anodization of Fe-contaminated Si substrates. The Fe1000 sample with Fe contamination of 1000 ppb showed a ten times stronger red PL than that of the reference PS sample without any Fe contamination, and this sample also showed the higher thermal stability for PL spectra as compared with the reference PS sample. Furthermore, the PL intensity from the PS with Fe contamination is linearly proportional to the Fe-related trap concentrations of Si substrates obtained from DLTS. Especially, all the PS samples exhibit the same PL peak position regardless of Fe contamination concentrations, as compared with that of the reference PS. This means that there is no significant effect such as the variation of size distribution of nanocrystalline Si in PS layer formed on Fe-contaminated Si substrate. Based on the results of PL and DLTS, we found that the PL efficiency depends strongly on the Fe-related trap concentration in Si substrates.     

High-resolution XRD study of stress-modulated YBCO films with various thicknesses

High-quality epitaxial YBa₂Cu₃O_7−δ (YBCO) superconducting films with thicknesses between 0.2 and 2 μm were fabricated on (0 0 l) LaAlO₃ with direct-current sputtering method. The influence of film thickness on the structure and texture was investigated by X-ray diffraction conventional θ–2θ scan and high-resolution reciprocal space mapping (HR-RSM). The films grew with strictly c-axis epitaxial, and no a-axis-oriented growth was observed up to a thickness of 2 μm. Lattice parameters of the YBCO films with different thicknesses were extracted from symmetry and asymmetry HR-RSMs. The X-ray lattice parameter method was used to determine the residual stress in YBCO films by measuring the a-, b-, c-axis strains, respectively. The results showed that YBCO films within thinner than 1 μm were under compressive stress, which was relieved increasing of film thickness. However, beyond 1 μm in thickness, YBCO films exhibited a tensile stress. Based on the experimental analysis, the variety of residual stresses in the films is mainly attributed to oxygen vacancies with thickness of YBCO film increasing.     

Oxygen-pressure dependence of the crystallinity of MgO films grown on Si(1 0 0) by PLD

Effects of the oxygen partial pressure on pulsed-laser deposition of MgO buffer layers on silicon substrates were investigated. The overall growth process was monitored in situ by reflection high-energy electron diffraction (RHEED) method. It was found that the crystallinity and surface morphology of the MgO films were strongly affected by oxygen partial pressure in the deposition chamber. The oxygen-pressure dependence could be explained in terms of interactions of oxygen with species in the plume-like plasma. The MgO film obtained at an optimal oxygen-pressure range of 1×10⁻²–1 Pa exhibited an atomic-smooth and defect-free surface (the root-mean-square roughness being as low as 0.82 nm). For the metal–insulator–metal (MIM) structure of Au/MgO (150 nm)/TiN prepared at the optimal growth conditions achieved a very low leak current density of 10⁻⁷ A cm⁻² at an electric field of 8×10⁵ V cm⁻¹ and the permittivity (ε_r) of about 10.6, virtually the same as that of the bulk MgO single crystals.     

The photoluminescence of ZnO thin films grown on Si (1 0 0) substrate by plasma-enhanced chemical vapor deposition

High-quality ZnO thin films have been grown on a Si(1 0 0) substrate by plasma-enhanced chemical vapor deposition (PECVD) using a zinc organic source (Zn(C₂H₅)₂) and carbon dioxide (CO₂) gas mixtures at a temperature of 180°C. A strong free exciton emission with a weak defect-band emission in the visible region is observed. The characteristics of photoluminescence (PL) of ZnO, as well as the exciton absorption peak in the absorption spectra, are closely related to the gas flow rate ratio of Zn(C₂H₅)₂ to CO₂. Full-widths at half-maximum of the free exciton emission as narrow as 93.4 meV have been achieved. Based on the temperature dependence of the PL spectra from 83 to 383 K, the exciton binding energy and the transition energy of free excitons at 0 K were estimated to be 59.4 meV and 3.36 eV, respectively.     

Microstructure and ferroelectric properties of BaTiO3 films on LaNiO3 buffer layers by rf sputtering

We have fabricated LaNiO₃ and BaTiO₃ films using the rf sputtering method. The LaNiO₃ were deposited on Si substrates, demonstrating a (1 0 0) highly oriented structure and nanocrystalline characteristic with a grain size of 30 nm. The BaTiO₃ thin films were deposited on the LaNiO₃ buffer layers, and have exhibited a (1 0 0) texture with a thickness of 400 nm. A smooth interface is obtained between the LaNiO₃ bottom electrode and the BaTiO₃ film from cross-section observations by scanning electron microscopy. The bi-layer films show a dense and column microstructure with a grain size of 60 nm. Ferroelectric characterizations have been obtained for the BaTiO₃ films. The remnant polarization and coercive field are 2.1 μC/cm² and 45 kV/cm, respectively. The leak current measurements have shown a good insulating property.     

Growth of Na modified potassium lithium niobate crystal by the Czochralski method

Transparent Na modified potassium lithium niobate (Na_0.23K_2.60Li_1.82Nb_5.35O_15.70; NKLN) crystal was successively grown by the Czochralski method using RF induction heating from melt composition Na₂O:K₂O : Li₂O:Nb₂O₅=2:30:25:43 mol%. NKLN crystal showed a tetragonal tungsten bronze structure with lattice constants a=12.5446±0.0010 Å and c=4.0129±0.0005 Å at room temperature. The dielectric constant along the c-axis ε₃₃ showed a sharp maximum around 480 °C. Optical transmission edge was 370 nm and optical transmission spectra showed no absorption at wavelengths ranging from 380 to 800 nm. The structural and optical properties of NKLN were similar to those of the near stoichiometric KLN crystals. We believe that the growth of NKLN by the Czochralski method has an advantage for a large size and high-quality crystal.     

High-quality ZnO thin films prepared by two-step thermal oxidation of the metallic Zn

In this paper, we report the preparation of nanocrystalline ZnO thin films on Si (1 0 0) substrates using a simple method, in which a resistive thermal evaporation of Zn and a two-step annealing process were employed. The aim of the first annealing step in an oxygen ambient at 300°C for 2 h is to form ZnO layers on the surface of the Zn films to prevent the diffusion of the metallic Zn from the films during the high-temperature annealing process. To obtain high-quality ZnO films, a high-temperature annealing step was performed at temperature in the range of 600–900°C. The effects of the annealing temperature on the photoluminescence (PL) and orientation of ZnO nanocrystalline thin films were studied. A very strong near-band-edge emission around 375 nm with a full-width at half-maximum of 105 meV and a relatively weak emission around 510 nm related to deep-level defects were observed, which indicated that high-quality ZnO films have been obtained.     

Compositional plane of a wide-gap semiconductor CaCdSeS lattice-matched to InP and GaAs

We have investigated compositional plane of a wide band gap solid solution semiconductor Ca_1−xCd_xSe_1−yS_y (x0.32) using powder synthesis under thermal equilibrium condition. The solubility limit at 1273 K varies with respect to the Se concentration y, taking a minimum Cd solubility limit of 0.12 at y=0.8 and a maximum limit of 0.32 at y=1.0. It is found that the system can be lattice-matched to GaAs and InP under covering the energy band gap of ultraviolet–visible region. These results allow to design optoelectronic devices adopting the Ca_1−xCd_xSe_1−yS_y system.     

Deep ultraviolet emission of ZnO films prepared by RF magnetron sputtering at changing substrate temperature

ZnO films with deep ultraviolet emission on (0 0 0 6) sapphire substrates were prepared by RF magnetron sputtering at periodically changing substrate temperature. It is found that the as-prepared ZnO films consist of the obvious multilayered structures from the SEM images of their cross-sections. Room temperature photoluminescence of ZnO films with multilayered structure shows two emissions centered at 332 and 388 nm with 260 nm excited wavelength. The strong deep ultraviolet emission at 332 nm is due to the O 2p dangling-bond state in the multilayered structure of ZnO films. Raman scattering spectrum of sample shows that such structured ZnO film possesses strong compressive stress.     

Cracking assisted nucleation in chemical vapor deposition of silicon nanoparticles on silicon dioxide

Deposition of sub-monolayer silicon on SiO₂/Si(1 0 0) greatly facilitates nucleation in subsequent thermal chemical vapor deposition (CVD) of silicon nanoparticles. Sub-monolayer seeding is accomplished using silicon atoms generated via disilane decomposition over a hot tungsten filament. The hot-wire process is nonselective towards deposition on silicon and SiO₂, is insensitive to surface temperature below 825 K, and gives controlled coverages well below 1 ML. Thermal CVD of nanoparticles at 1×10⁻⁴ Torr disilane and temperatures ranging from 825 to 925 K was studied over SiO₂/Si(1 0 0) surfaces that had been subjected to predeposition of Si or were bare. Seeding of the SiO₂ surface with as little as 0.01 ML is shown to double the nanoparticle density at 825 K, and densities are increased twenty fold at 875 K after seeding the surface with 30% of a monolayer.     

Edge-defined film-fed growth of Yb:YVO4 single crystal plates

The applicability of the edge-defined film-fed growth (EFG) technique for Yb_xY_(1−x)VO₄ (x=0.05, 0.1 and 1) was approved by successful growth of crystals up to 80 mm in length as the thin plates. Low-angle grain boundaries and the crystal coloration as main defects were found. Optimal seed orientation was suggested on the strength of vanadate crystal plate morphology. Optical properties, chemical composition and the crystalline quality were investigated.     

AlGaN photodetectors grown on Si(1 1 1) by molecular beam epitaxy

The fabrication and characterisation of Al_xGa_1−xN (0x0.35) photodetectors grown on Si(1 1 1) by molecular beam epitaxy are described. For low Al contents (<10%), photoconductors show high responsivities (10A/W), a non-linear dependence on optical power and persistent photoconductivity (PPC). For higher Al contents the PPC decreases and the photocurrent becomes linear with optical power. Schottky photodiodes present zero-bias responsivities from 12 to 5 mA/W (x=0−0.35), a UV/visible contrast higher than 10³, and a time response of 20 ns, in the same order of magnitude as for devices on sapphire substrate. GaN-based p–n ultraviolet photodiodes on Si(1 1 1) are reported for the first time.     

Structure and thermal stability of MOCVD ZrO2 films on Si (1 0 0)

The structure and thermal stability of ZrO₂ films grown on Si (1 0 0) substrates by metalorganic chemical vapor deposition have been studied by high-resolution transmission electron microscopy, selected area electron diffraction and X-ray energy dispersive spectroscopy. As-deposited films consist of tetragonal ZrO₂ nanocrystallites and an amorphous Zr silicate interfacial layer. After annealing at 850°C, some monoclinic phase is formed, and the grain size is increased. Annealing a 6 nm thick film at 850°C in O₂ revealed that the growth of the interfacial layer is at the expense of the ZrO₂ layer. In a 3.0 nm thick Zr silicate interfacial layer, there is a 0.9 nm Zr-free SiO₂ region right above the Si substrate. These observations suggest that oxygen reacted with the Si substrate to grow SiO₂, and SiO₂ reacted with ZrO₂ to form a Zr silicate interfacial layer during the deposition and annealing. Oxygen diffusion through the tetragonal ZrO₂ phase was found to be relatively easier than through the monoclinic phase.     

CrO2 (1 0 0) and TiO2 (1 0 0) film heteroepitaxy on a BaF2 (1 1 1)/Si (1 0 0) substrate

Multi-domained heteroepitaxial rutile-phase TiO₂ (1 0 0)-oriented films were grown on Si (1 0 0) substrates by using a 30-nm-thick BaF₂ (1 1 1) buffer layer at the TiO₂–Si interface. The 50 nm TiO₂ films were grown by electron cyclotron resonance oxygen plasma-assisted electron beam evaporation of a titanium source, and the growth temperature was varied from 300 to 600 °C. At an optimal temperature of 500 °C, X-ray diffraction measurements show that rutile phase TiO₂ films are produced. Pole figure analysis indicates that the TiO₂ layer follows the symmetry of the BaF₂ surface mesh, and consists of six (1 0 0)-oriented domains separated by 30° in-plane rotations about the TiO₂ [1 0 0] axis. The in-plane alignment between the TiO₂ and BaF₂ films is oriented as [0 0 1] TiO₂ || BaF₂ or [0 0 1] TiO₂ || BaF₂ . Rocking curve and STM analyses suggest that the TiO₂ films are more finely grained than the BaF₂ film. STM imaging also reveals that the TiO₂ surface has morphological features consistent with the BaF₂ surface mesh symmetry. One of the optimally grown TiO₂ (1 0 0) films was used to template a CrO₂ (1 0 0) film which was grown via chemical vapor deposition. Point contact Andreev reflection measurements indicate that the CrO₂ film was approximately 70% spin polarized.