Structures and static electric properties of novel alkalide anions F-Li+Li- and F-Li3+Li3-

Novel cluster anions Li2F- and Li6F- with alkalide character have been studied in the present paper. In contrast to a typical neutral alkalide, Li2F- contains a F- anion instead of the neutral ligand and forms an alkalide anion F-Li+Li-. In addition to a F- anion ligand, Li6F- contains a Li3+ superalkali cation instead of the alkali metal cation and a Li3- superalkali anion instead of the alkali metal anion, and this alkalide anion can be denoted by F-Li3+Li3-, which is supported by NBO charge results. The results indicate that the F- anion can polarize not only the Li atom but also the Li3 superalkali to form alkalide anions with excess electrons. For Li2F-, two linear structures (1Sigma+ and 3Sigma+ states) are obtained. For Li6F-, the structure of the 1A1 state is a trigonal antiprism capped by the F- anion with C3v symmetry, while the structure of the 7A' state is a slightly distorted trigonal antiprism with Cs symmetry. Due to the excess electrons on the alkali metal and superalkali anions (Li- and Li3-), the alkalide anions Li2F- and Li6F- have large first hyperpolarizabilities (beta0=1.116x10(4)-1.764x10(5) au). For the spin multiplicity effect on electric properties, in these two alkalide anions, the values of the static electric properties, especially the first hyperpolarizabilities, of the high spin states are larger than the corresponding values of the low spin states. For the substitution effect of superalkali atoms, in the two singlet states, as the Li3 superalkalis substitute the Li atoms, the value of the mean of polarizability increases, while the values of dipole moment and the first hyperpolarizability decrease.     

Novel superalkali superhalogen compounds (Li3)+(SH)- (SH=LiF2, BeF3, and BF4) with aromaticity: new electrides and alkalides.

Optimized structures, with all real frequencies, of superalkali superhalides (Li(3))(+)(SH)(-) (SH=LiF(2), BeF(3), and BF(4)), are obtained, for the first time, at the B3LYP/aug-cc-pVDZ and MP2/aug-cc-pVDZ computational levels. These superalkali superhalides possess three characteristics that are significantly different from normal alkali halides. 1) They have a variety of structures, which come from five bonding mode types: edge-face, edge-edge, face-face, face-edge, and staggered face-edge. We find that the bonding mode type closely correlates with the Li(3)-SH bond energy. 2) The valence electrons on the Li(3) ring are pushed out by the (SH)(-) anion, and become excess electrons, conferring alkalide or electride characteristics on these Li(3)-SH species, depending on the bonding mode type. 3) The highest occupied molecular orbital of each Li(3)-SH species is a doubly occupied delocalized sigma bonding orbital on the Li(3) ring, which indicates its aromaticity. It is noticeable that the maximum negative nucleus-independent chemical shift value (about -10 ppm) moves out from the center of the Li(3) ring, owing to repulsion by the SH(-) anion. We find that these superalkali superhalides are not only complicated "supermolecules", but are also a new type of alkalide or electride, with aromaticity.     

Ab initio molecular-orbital study of structures and energetics of Si3H3 neutral and anion

The geometric structures and isomeric stabilities of various stationary points in Si(3)H(3) neutral and its anion are investigated at the coupled-cluster singles, doubles (triples) [CCSD(T)] level of theory. For geometrical surveys, the basis sets used are of the Dunning's correlation consistent basis sets of triple-zeta quality for the neutral. To the anions, the Dunning's correlation consistent basis sets of double-zeta quality with diffuse functions are applied. For the three lower-lying anion isomers, the Dunning's correlation consistent basis sets of triple-zeta quality with diffuse functions (aug-cc-pVTZ) are also used. The final energies for the optimized stationary points are calculated at the CCSD(T) level of theory with the aug-cc-pVTZ basis sets. The basis sets of 6-311++G(3df,2pd) were also used for the lower-lying anion isomers. The Gaussian-2 method was performed only for the lower-lying anion isomers to clarify the relative stabilities. The global minimum neutral 1 (C(1):(2)A) has an unsymmetrical hydrogen-bridged bond; the conformer 2 in C(s) symmetry is a saddle point connecting the two equivalent isomers 1. Two lower-lying isomers (3 and 4) are also predicted within the energy range of 20 kJmol. In the anion, however, the conformer 4 (C(s):(1)A(')) with five formal valence electrons is a global minimum. Two more isomers (2 and 3) lie within 20 kJmol as in the neutral; the conformer 1 converts to the isomer 2. The quartets for the neutrals and diradical triplets for the anions were further studied; lower-lying quartets and triplets, competing with the corresponding doublet and singlet, respectively, were not found in the present systems. The vertical and adiabatic electron affinities of the global minimum neutral 1, producing the second lowest-lying anion isomer 2, amount to 2.18 and 2.35 eV, respectively, at the CCSD(T)/aug-cc-pVTZ level of theory. The electron addition to the third lowest-lying neutral isomer 4 produces the largest vertical electron affinities of 2.48 eV. The D(3h) structure, being the global minimum in the corresponding Si(3)H(3) (+) cation (trisilacyclopropenyl cation), converts to the isomer 8 (C(s)) or 11 (C(2)) due to the Jahn-Teller effect in the Si(3)H(3) neutral.     

High accuracy ab initio studies of Li6+, Li6-, and three isomers of Li6

The structures and energetics of Li(6) (+), Li(6) (-) and three isomers of Li(6) are investigated using the coupled-cluster singles, doubles and perturbative triples [CCSD(T)] method with valence and core-valence correlation consistent basis sets of double- to quadruple-zeta quality (cc-pVXZ and cc-pCVXZ, where X=D-Q). These results are compared with qualitatively different predictions by less reliable methods. Our results conclusively show that the D(4h) isomer is the global minimum structure for Li(6). It is energetically favored over the C(5v) and D(3h) structures by about 5.1 and 7.1 kcal mol(-1), respectively, after the inclusion of the zero-point vibrational energy (ZPVE) correction. Our most accurate total atomization energies are 123.2, 117.6, and 115.7 kcal mol(-1) for the D(4h), C(5v), and D(3h) isomers, respectively. Comparison of experimental optical absorption spectra with our computed electronic spectra also indicate that the D(4h) isomer is indeed the most stable structure. The cation, anion, and some higher spin states are investigated using the less expensive cc-pCVDZ basis set. Adiabatic ionization energies and electron affinities are reported and compared with experimental values. Predictions of molecular properties are found to be sensitive to the basis set used and to the treatment of electron correlation.     

Ab initio investigation on a new class of binuclear superalkali cations M2Li(2k+1)+ (F2Li3+, O2Li5+, N2Li7+, and C2Li9+)

Superalkalies with low ionization potentials (IPs) can exhibit behaviors reminiscent of alkali atoms and hence be considered as potential building blocks for the assembly of novel nanostructured materials. A new series of binuclear superalkali cations M(2)Li(2k+1)(+) (M = F, O, N, C) has been studied using ab initio methods. The structural features of such cations are found to be related to the central atoms. In the preferred structures of F(2)Li(3)(+), O(2)Li(5)(+), and N(2)Li(7)(+), two central atoms are bridged by lithium atoms. While in the global minima of C(2)Li(9)(+), two central carbon atoms directly link each other and the C-C unit extends to the surface of the whole system. These M(2)Li(2k+1)(+) species exhibit very low vertical electron affinities of 2.74-4.61 eV at the OVGF/6-311+G(3df) level and hence should be classified as superalkali cations.     

Valence bond structures for the D2h isomer of N2O4 and some isomers of S3O2 and S3O

The construction of valence bond structures of the increased-valence type is re-described for the D2h isomer of N2O4 and applied to obtain the corresponding valence bond structures for isomers of S3O2 and S3O, each of which has at least one six-electron four-center bonding unit. It is discussed how the S-O and S-S bond properties that are associated with the S3O2 and S3O increased-valence structures are in qualitative accord with the calculated bond lengths. The qualitative six-electron four-center molecular orbital theory for the symmetrical O-S-S-O component of each S3O2 isomer is related to the increased-valence structure for the six electrons. An increased-valence structure for the lowest-energy S3O2 isomer is equivalent to a restricted form of resonance between 16 Lewis-type valence bond structures. The two types of S-S bond length are used to provide empirical estimates of the weights for these Lewis structures and are compared with those obtained from the results of STO-6G valence bond calculations for the 3Sigma- ground state of SO.     

The trigonal bipyramidal MN3M species: a new kind of aromatic complex containing a multiple-fold aromatic N3 subunit.

A new kind of aromatic trigonal bipyramidal MN3M (M=Be, B, Mg, Al, and Ca) species, with all real frequencies, is obtained at the MP2/6-311+G(3d) level. The nucleus-independent chemical shift values are -102.16 ppm for the N3 (3-) ring, and -74.09, -79.39, -65.06, -74.44, and -62.33 ppm (at the geometrical center of the trigonal bipyramid) for BeN3Be, BN3B, MgN3Mg, AlN3Al, and CaN3Ca, respectively. Molecular orbital analysis indicates that the regular triangular N3 (3-) ring and each MN3M species have three aromatic six-electron systems (pi, sigma(p), and sigma(s)) and exhibit threefold aromaticity. The CaN3Ca species has a very low vertical ionization energy of 3.64 eV at the CCSD(T)/6-311+G(3d) level, which is even lower than the ionization energy (3.9 eV) of the Cs atom. Therefore, CaN3Ca can be considered as a new superalkali species. A further study on the CaN3CaCl molecule confirms the superalkali characteristics of CaN3Ca. Two interesting phenomena are explored in the MN3M species: the delocalized electron cloud of the N3 subunit is elongated by two M cations, and the electron clouds of two M cations are distended by the N3 (3-) ring.     

The conversion among various B4C clusters: a density functional theoretical study

Geometry optimizations and vibration frequencies of B4C clusters were performed with Becke-3LYP method using 6-31G(d) basis set. We have found 14 stable isomers, and the most stable structure among them is the five-member ring containing two three-member boron rings. We also analyzed these stable isomers in detail, and the results show that the structures containing three-member boron rings are predominant in energy for B4C clusters. In terms of MO and NBO analysis, the three-centered bond and the pi-electron delocalization play an important role in stabilizing the planar five-member rings of these B4C clusters. Our calculations suggest that isomer4 can be converted into isomer7 with only an energy barrier of 0.31 kJ mol(-1) at the B3LYP/6-311G+(3df) level. Although the planar structures of the five-member rings (isomers12-14) can be converted with each other, the conversions of isomer14 to isomer13 and isomer13 to isomer12 have high-energy barriers of 70.99 and 68.51 kJ mol(-1) at the B3LYP/6-31G(d) level, respectively.     

Isomers of cyclo-heptasulfur and their coordination to Li(+): an ab initio molecular orbital study

The potential energy hypersurfaces (PESs) of heptasulfur (S7) and of [LiS7]+ have been investigated by ab initio molecular orbital calculations at the G3X(MP2) level of theory. Besides the chair-like seven-membered ring (1a) as the global minimum structure, eight local minimum structures and one transition state have been located on the PES of S7. The barrier for pseudorotation of 1a is only 5.6 kJ mol(-1). The boat-like S7 ring (1b) is 12.1 kJ mol(-1) less stable than 1a, followed by three isomers of connectivity S6=S and four open-chain isomers. On the basis of multireference calculations at the MRCI(4,4)+Q/6-311G(d) level, the most stable open-chain form of S7 is a triplet of relative energy 133.1 kJ mol(-1). Thus, the reaction energy (deltaE0) for the ring opening of 1a is 133.1 kJ mol(-1), halfway between those of the highly symmetrical rings S6 and S8. Because of their strong multireference characters, the stabilities of the biradicalic singlet chains are significantly overestimated by the single-reference-based G3X(MP2) method. The calculated vibrational spectrum of 1a is in good agreement with experimental data. The various isomers of S7 form stable complexes with Li+ with coordination numbers of 1-4 for the metal atom and binding energies in the range of -93.8 to -165.7 kJ mol(-1). A total of 15 isomeric complexes have been located, with 13 of them containing cyclic ligands. The global minimum structure (2a) is composed of 1a, with the Li+ cation linked to the four negatively charged sulfur atoms (symmetry C(s)). The corresponding complex 2c containing the ligand 1b is by 23.4 kJ mol(-1) less stable than 2a, and a bicyclic crown-shaped LiS7 cation (2e) is by 34.9 kJ mol(-1) less stable than 2a. Even less stable are four complexes with the branched S6=S ligand. SS bond activation by polarization of the valence electrons takes place on coordination of Li+ to cyclo-S7 (1a).     

Relative stability of planar versus double-ring tubular isomers of neutral and anionic boron cluster B20 and B20-

High-level ab initio molecular-orbital methods have been employed to determine the relative stability among four neutral and anionic B20 isomers, particularly the double-ring tubular isomer versus three low-lying planar isomers. Calculations with the fourth-order Moller-Plessset perturbation theory [MP4(SDQ)] and Dunning's correlation consistent polarized valence triple zeta basis set as well as with the coupled-cluster method including single, double, and noniteratively perturbative triple excitations and the 6-311G(d) basis set show that the double-ring tubular isomer is appreciably lower in energy than the three planar isomers and is thus likely the global minimum of neutral B20 cluster. In contrast, calculations with the MP4(SDQ) level of theory and 6-311+G(d) basis set show that the double-ring anion isomer is appreciably higher in energy than two of the three planar isomers. In addition, the temperature effects on the relative stability of both 10B20- and 11B20- anion isomers are examined using the density-functional theory. It is found that the three planar anion isomers become increasingly more stable than the double-ring isomer with increasing the temperature. These results are consistent with the previous conclusion based on a joint experimental/simulated anion photoelectron spectroscopy study [B. Kiran et al., Proc. Natl. Acad. Sci. U.S.A. 102, 961 (2005)], that is, the double-ring anion isomer is notably absent from the experimental spectra. The high stability of the double-ring neutral isomer of B20 can be attributed in part to the strong aromaticity as characterized by its large negative nucleus-independent chemical shift. The high-level ab initio calculations suggest that the planar-to-tubular structural transition starts at B20 for neutral clusters but should occur beyond the size of B20- for the anion clusters.     

DFT方法理论研究星际分子C3S+结构和光谱

在B3LYP／6—31lG(d)水平上对可能的星际分子C3S^ 的各种异构体进行了理论计算研究，得到其几何构型、红外光谱和精确能量以利于实验室和星际观测，讨论了其星际含义，并与其中性分子C3S做了比较．结果表明：C3S^ 有3个稳定的异构体，包括线形、三元环和四元环几何构型．按热力学稳定的异构体依次是直线型具有C∞v对称性的CCCS^ (1)，其次是具有CC桥键四元环构型的cC3S^ (2)，能量最高是三元环构型具有CC环外键的C—cCCS^ (3)。     

Synthesis and characterization of octa- and hexanuclear polyoxomolybdate wheels: role of the inorganic template and of the counterion

Eight new compounds based on [O3PCH2PO3]4- ligands and {MoV2O4} dimeric units have been synthesized and structurally characterized. Octanuclear wheels encapsulating various guests have been isolated with different counterions. With NH4+, a single wheel was obtained, as expected, with the planar CO32- guest, (NH4)12[(MoV2O4)4(O3PCH2PO3)4(CO3)2].24H2O (1a), while with the pyramidal SO32- guest, only the syn isomer (NH4)12[(MoV2O4)4(O3PCH2PO3)4(SO3)2].26H2O (2a) was characterized. The corresponding anti isomer was obtained with Na+ as counterions, Na12[(MoV2O4)4(O3PCH2PO3)4(SO3)2]39H2O (2b), and with mixed Na+ and NH4(+) counterions, Na+(NH4)11[(MoV2O4)4(O3PCH2PO3)4(SO3)2].13H2O (2d). With [O3PCH2PO3]4- extra ligands, the octanuclear wheel Li12(NH4)2[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].31H2O (4a) was isolated with Li+ and NH4+ counterions and Li14[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].34H2O (4c) as a pure Li+ salt. A new rectangular anion, formed by connecting two MoV dimers and two MoVI octahedra via methylenediphosphonato ligands with NH4+ as counterions, (NH4)10[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2(HO3PCH2PO3)2].15H2)O (3a), and Li9(NH4)2Cl[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2]. 22H2O (3d) as a mixed NH4+ and Li+ salt have also been synthesized. The structural characterization of the compounds, combined with a study of their behavior in solution, investigated by 31P NMR, has allowed a discussion on the influence of the counterions on the structure of the anions and their stability. Density functional theory calculations carried out on both isomers of the [(MoV2O4)4(O3PCH2PO3)4(SO3)2]12- anion (2), either assumed isolated or embedded in a continuum solvent model, suggest that the anti form is favored by approximately 2 kcal mol(-1). Explicit insertion of two solvated counterions in the molecular cavity reverses this energy difference and reduces it to less than 1 kcal mol(-1), therefore accounting for the observed structural versatility.     

Theoretical study on polynuclear superalkali cations with various functional groups as the central core

A new series of polynuclear superalkali cations YLi(3)(+) (Y = CO(3), SO(3), SO(4), O(4), and O(5)) has been created when the central group is surrounded by alkali atoms. The structural characteristics and stabilities of these systems are provided on the basis of ab initio methods. In the lowest-energy structure of the CO(3)Li(3)(+), SO(3)Li(3)(+), and SO(4)Li(3)(+) cations, the central Y (Y = CO(3), SO(3), and SO(4)) group features a slight distortion. The global minima of O(4)Li(3)(+) and O(5)Li(3)(+) are of the forms O(2)(-)(Li(+))(3)O(2)(-) and O(2)(-)(Li(+))(3)O(3)(-), respectively, both of which contain two monovalent ion units. The structural integrity of the central Y group and the arrangement of the lithium ligands are two influencing factors on the vertical electron affinities (EA(vert)) for the YLi(3)(+) species. The YLi(3)(+) cation, with its lithium ligands being distributed evenly or far from each other, tends to exhibit a low EA(vert) value, whereas a greater extent of cleavage of the central Y group leads to a higher EA(vert) value and even makes some species lose their superalkali nature.     

Ab initio calculation of carbon clusters. II. Relative stabilities of fullerene and nonfullerene C24

Chemical stabilities of six low-energy isomers of C24 derived from global-minimum search are investigated. The six isomers include one classical fullerene (isomer 1) whose cage is composed of only five- and six-membered rings (56-MRs), three nonclassical fullerene structures whose cages contain at least one four-membered ring (4-MR), one plate, and one monocyclic ring. Chemical and electronic properties of the six C24 isomers are calculated based on a density-functional theory method (hybrid PBE1PBE functional and cc-pVTZ basis set). The properties include the nucleus-independent chemical shifts (NICS), singlet-triplet splitting, electron affinity, ionization potential, and gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO-LUMO) gap. The calculation suggests that the neutral isomer 2, a nonclassical fullerene with two 4-MRs, may be more chemically stable than the classical fullerene (isomer 1). Analyses of molecular orbital NICS show that the incorporations of 4-MRs into the cage considerably reduce paratropic contributions from HOMO, HOMO-1, and HOMO-2, which are mainly responsible for the sign change in NICS from positive for isomer 1 (42) to negative (-19) for isomer 2, although C24 clusters satisfy neither 4N+2 nor 2(N+1)2 aromaticity rule. Anion photoelectron spectra of four cage isomers, one plate, one monocyclic ring, and one tadpole isomer, as well as three bicyclic ring isomers are calculated. The simulated photoelectron spectra of mono- and bicyclic rings (with C1 symmetry) appear to match the measured HOMO-LUMO gap (between the first and second band in the experimental spectra) [S. Yang et al., Chem. Phys. Lett. 144, 431 (1988)]. Nevertheless, the nonclassical fullerene isomers 3 and 4 apparently also match the measured vertical detachment energy (2.90 eV) reasonably well. These results suggest possible coexistence of nonclassical fullerene isomers with the mono- and bicyclic ring isomers of C24(-) under the experimental conditions.     

Site-specific addition of D(2)O to the (H(2)O)(6)(-) "hydrated electron" cluster: isomer interconversion and substitution at the double H-bond acceptor (AA) electron-binding site

We report the results of an experimental study designed to establish whether, once formed, one of the isomer classes of the hydrated electron clusters, (H(2)O)(n)(-), can interconvert with others when a water molecule is added by condensation. This is accomplished in an Ar-cluster mediated approach where a single intact D(2)O molecule is collisionally incorporated into argon-solvated water hexamer anions, creating the isotopically labeled D(2)O.(H(2)O)(6)(-).Ar(n) heptamer anion. Photoelectron and infrared predissociation spectroscopies are employed both to characterize the isomers generated in the condensation event and to track the position that the D(2)O label adopts within these isomeric structures. Despite the fact that the water hexamer anion precursor clusters initially exist in the isomer I form, incorporation of D(2)O produces mostly isomers I' and II in the labeled heptamer, which bind the electron more (I') or less (II) strongly than does the isomer I class. Isomers I and I' are known to feature electron binding primarily onto a single water molecule that resides in an AA (A = H-bond acceptor) site in the network. Surprisingly, the D(2)O molecule can displace this special electron-binding H(2)O molecule such that the anionic cluster retains the high binding arrangement. In the more weakly binding isomer II clusters, the D(2)O molecule fractionates preferentially to sites that give rise to the vibrational signature of isomer II.     

Arachno, nido, and closo aromatic isomers of the Li6B6H6 molecule

We analyzed chemical bonding in low-lying isomers of the recently computationally predicted B(6)H(6)Li(6) molecule. According to our calculations the benzene-like B(6)H(6)Li(6) (D(2h), (1)A(1g)) arachno structure with the planar aromatic B(6)H(6)(6-) anion is the most stable one. A nido isomer with two aromatic B(6)H(6)(4-) (pentagonal pyramid) and Li(3)(+) (triangular) moieties, which can be considered as derived from the global minimum structure through a two-electron intramolecular transfer from B(6)H(6)(6-) to three Li(+) cations, was found to be 10.7 kcal/mol higher in energy. A closo isomer with three aromatic moieties (octahedral B(6)H(6)(2-) and two Li(3)(+)) was found to be 31.3 kcal/mol higher in energy than the global minimum. Another isomer with three aromatic moieties (two B(3)H(3)(2-) and Li(3)(+)) was found to be substantially higher in energy (74.4 kcal/mol). Thus, the intramolecular electron transfers from the highly charged B(6)H(6)(6-) anion to cations are not favorable for the B(6)H(6)Li(6) molecule, even when a formation of three-dimensional aromatic B(6)H(6)(2-) anion and two sigma-aromatic Li(3)(+) cations occurs in the closo isomer.     

12]Annulene radical anions revisited: evaluation of structure assignments based on computed energetic and electron spin resonance data

We report density functional and coupled cluster calculations on numerous monocyclic and bicyclic (CH)12(*-) isomers. At the RCCSD(T)/cc-pVDZ//UB3LYP/6-31+G* level, a nearly planar, bond-equalized radical anion of 1,7-di-trans-[12]annulene (4a(*-)) is lowest in energy; several other isomers and conformations lie within 3 kcal/mol of 4a(*-). RCCSD(T)/AUG-cc-pVDZ//UB3LYP/6-31+G* results place the all-cis isomer 3(*-) slightly below 4a(*-) in energy. Validation studies on the heptalene radical anion, [16]annulene radical anion, and tri-trans-[12]annulene radical anion indicate that electron spin resonance (ESR) hyperfine coupling constants (aH values) computed at the BLYP/EPR-III level on DFT geometries give much better agreement with experimental values than those computed using B3LYP/6-31G*. We were unable to locate any C12H12(*-) isomer that could account for the ESR spectrum previously attributed to a highly twisted structure for the 1,7-di-trans-[12]annulene radical anion. Our computed energetic and ESR data for [12]annulene radical anions and their valence isomers suggest that 4a(*-) may have been made, yet its ESR spectrum was incorrectly assigned to the bicyclic isomer 6b(*-). Finally, the computed (1)H NMR shift values of the dianion of 4 reveal a distinct diatropic ring current that should aid in its characterization.     

二氧化三氮(N3O2)中性分子和离子的一些重要反应过程的理论研究

二重态的N3O2中性分子作为中间体, 在N3O2阴离子的光解离反应和NO+N2O←→N2+NO2反应中均起重要作用. 在CCSD(T)/6-311G(d,p)//B3LYP/6-311G(d,p)+ZPE的水平上, 对这两个反应进行了理论计算. 结果表明, 在N3O2阴离子的光解离反应中, 该阴离子先在光照下解离为与其具有相同的W构型的中性分子和一个电子, 这个中性分子是一个过渡态, 它将打破C2v构型变成具有Cs对称性的W型中间异构体, 然后再经过一个过渡态, 裂解成N2O+NO两个小分子. 这个裂解过程的能垒非常低(5.96 kJ/mol), 因此在实验中很难检测到W型的中间异构体. 在另一个重要的[N3O2]体系的反应(NO+N2O←→N2+NO2)中, 找到了两条反应通道, 其中不经过中间异构体的一步转化通道更为可行.     

CCSD calculations on C(14), C(18), and C(22) carbon clusters

The structure and energetics of the ring isomers of C(4n+2) (n=3-5) carbon clusters were studied by using coupled-cluster singles and doubles excitation theory to overcome the vast differences existing in the literature. The results obtained in the present study clearly indicate that C(14), C(18), and C(22) carbon rings have bond-length and bond-angle alternated acetylenic minimum energy structures. Contrarily, density functional theory calculations were unable to predict these acetylenic-type structures and they ended up with the cumulenic structures. It is found from the coupled-cluster studies that the lowest-energy ring isomer for the first two members of C(4n+2) series is a bond-angle alternated cumulenic D((2n+1)h) symmetry structure while the same for the remaining members is a bond-length and bond-angle alternated C((2n+1)h) symmetry structure. In C(4n+2) carbon rings, Peierls-type distortion, transformation from bond-angle alternated to bond-length alternated minimum energy structures, occurs at C(14) carbon ring.     

Electrophilic attack on sulfur-sulfur bonds: coordination of lithium cations to sulfur-rich molecules studied by ab initio MO methods

Complex formation between gaseous Li+ ions and sulfur-containing neutral ligands, such as H2S, Me2Sn (n = 1-5; Me = CH3) and various isomers of hexasulfur (S6), has been studied by ab initio MO calculations at the G3X(MP2) level of theory. Generally, the formation of LiS(n) heterocycles and clusters is preferred in these reactions. The binding energies of the cation in the 29 complexes investigated range from -88 kJ mol(-1) for [H2SLi]+ to -189 kJ mol(-1) for the most stable isomer of [Me2S5Li]+ which contains three-coordinate Li+. Of the various S6 ligands (chair, boat, prism, branched ring, and triplet chain structures), two isomeric complexes containing the S5==S ligand have the highest binding energies (-163+/-1 kJ mol(-1)). However, the global minimum structure of [LiS6]+ is of C(3v) symmetry with the six-membered S(6) homocycle in the well-known chair conformation and three Li--S bonds with a length of 256 pm (binding energy: -134 kJ mol(-1)). Relatively unstable isomers of S6 are stabilized by complex formation with Li+. The interaction between the cation and the S6 ligands is mainly attributed to ion-dipole attraction with a little charge transfer, except in cations containing the six sulfur atoms in the form of separated neutral S2, S3, or S4 units, as in [Li(S3)2]+ and [Li(S2)(S4)]+. In the two most stable isomers of the [LiS6]+ complexes, the number of S--S bonds is at maximum and the coordination number of Li+ is either 3 or 4. A topological analysis of all investigated complexes revealed that the Li--S bonds of lengths below 280 pm are characterized by a maximum electron-density path and closed-shell interaction.