4-单取代-1,2,3-三氮唑的合成进展(Ⅰ)——通过环加成反应

1,2,3-三氮唑衍生物是近些年研究热点化合物之一,随着4-单取代型衍生物在医药、农药、材料等领域的广泛应用,该类化合物的合成及应用近些年引起了广大研究者的关注并获得了可喜进展。本文阐述了4-单取代-1,2,3-三氮唑衍生物的合成发展历史,着重综述了近十年来该类唑衍生物的合成发展情况。内容主要包括末端炔的环加成反应、由取代烯烃合成法及由3-芳基-2,3-二溴丙酸合成法。文章还包括一些合成方法及其产物的应用,并对一些重要的反应机理做了分析。文章最后对该类化合物的合成做了总结并展望了未来发展方向。     

4-单取代-1,2,3-三氮唑的修饰转化研究进展

1,2,3-三氮唑是一类广泛应用在医药、农药以及材料等领域的五元氮杂环结构.自2002年Sharpless和Meldal等发展了铜催化叠氮-炔偶极环加成反应以来,1,2,3-三唑化学在有机合成和药物化学领域的应用进入了新的发展阶段.4-单取代-1,2,3-三氮唑是该类化合物家族中的重要成员之一,其结构具有易于修饰转化的优点,由此可获得结构新颖、种类多样的衍生物分子.主要综述了4-单取代-1,2,3-三氮唑在结构修饰方面的研究进展,转化情况根据反应位点的不同分别展开,包括N¹、N²以及N³位,并讨论了反应的底物范围、局限性以及代表性反应机理.     

4-单取代-1,2,3-三氮唑的合成进展(Ⅱ)—通过去取代基反应

1,2,3-三氮唑衍生物是近些年研究热点化合物之一,随着4-单取代型衍生物在医药、农药、材料等领域的广泛应用,该类化合物的合成及应用近些年引起了广大研究者的关注并获得了可喜进展。本文阐述了4-单取代-1,2,3-三氮唑衍生物的合成发展历史,着重综述了近十年来该类唑衍生物的合成发展情况。内容主要涵盖二取代-1,2,3-三氮唑的去取代基反应,包括脱羧、脱苄基、脱羟(酰氧)基及脱取代乙基等反应。文章还包括一些合成方法及其产物的应用,并对一些重要的反应机理做了分析。文章最后对该类化合物的合成做了总结并展望了未来发展方向。     

4-单取代-1H-1,2,3-三氮唑的合成研究

以甲氧基聚乙二醇(mPEG)为起始原料通过磺酰化、叠氮化反应合成叠氮基甲氧基聚乙二醇(mPEG-N_3,2);在铜催化下和芳香炔、脂肪炔发生1,3-偶极环加成反应合成甲氧基聚乙二醇-1,2,3-三氮唑(mPEG-1,2,3-triazoles,3);再于酸性条件下脱除甲氧基聚乙二醇(mPEG)制备4-单取代-1H-1,2,3-三氮唑(4),其结构经过MS及~1H NMR、~(13)C NMR确证。     

N-取代-1,2,3-三氮唑化合物的合成研究进展

N-取代-1,2,3-三氮唑是一类重要的含氮杂环化合物,在药物化学、合成化学及材料等领域都具有广泛的应用价值.因此,N-取代-1,2,3-三氮唑的构建方法备受人们的关注.归纳总结了近年来N-取代-1,2,3-三氮唑的合成研究进展,主要介绍了以叠氮化合物、腙、Ts NHNH2和重氮为氮源以及NH-1,2,3-三氮唑为前体合成N-取代-1,2,3-三氮唑化合物的合成路线及其反应机理,并对该领域未来的发展进行了展望.     

由1,1-二溴烯烃一锅法合成1,4-二取代-1,2,3-三氮唑

以1,1-二溴乙烯和芳基叠氮化合物为原料,碘化亚铜为催化剂,室温下通过一锅法合成了1,4-二取代-1,2,3-三氮唑衍生物。考察了催化剂用量、反应溶剂、反应温度对产品收率的影响。通过IR,MS,_¹H NMR及_¹³C NMR等对目标产物结构进行确证,并提出了可能的反应机理。该合成方法具有环境友好、条件温和、操作简单、收率高等特点。     

5-取代-1H-1,2,4-三氮唑-3-羧酸的合成及结构表征

以5-氨基-1H-1，2，4-三氮唑-3-羧酸为原料，经重氮化反应和Sandmeyer反应得到5-X(X=Cl，Br，I，CN)-1H-1，2，4-三氮唑-3-羧酸，通过元素分析、UV，IR，1H NMR和MS对所有产物的结构进行了表征。     

5-取代-1H-1,2,4-三氮唑-3-羧酸的合成

三氮唑类化合物具有很强的生物活性[1,2],尤其是利用5 氨基 1H 1,2,4 三氨唑 3 羧酸为原料制得的Schiff碱具有较强的生根性能和较好的细胞分裂活性[3,4]本文以5 氨基 1H 1,2,4 三氨唑 3 羧酸为原料,经Sandmeyer反应将 NH2转变 Cl、 Br、 I和 CN。其合成路线如下:1　实验部分1 1　仪器与试剂Impact 420型傅里叶红外光谱仪;HP8452A二极管阵列紫外/可见光光度计;PE 2400型元素自动分析仪:XL 200MHz超导核磁共振仪;M 80AGC/MS质谱仪。5 氨基 1H 1,2,4 三氮唑 3 羧酸(工业纯,武汉中储鹤翔新技术有限公司,纯度95%以上),其余试剂均…     

1-单取代-1,2,3-三唑环的构建进展

随着1,2,3-三唑衍生物应用范围的扩大,该类化合物的合成在近几年引起了广泛关注并获得了快速发展.1-单取代-1,2,3-三唑衍生物比其他类型三唑的杂环构建难度大,主要原因是合成该类产物"炔源"的结构要求独特,并需要相应特殊的反应条件.综述了该类杂环的构建研究进展,按照"炔源"的种类不同分别阐述了各种构建方法,主要包括乙炔、取代乙炔、乙烯化物等,并对部分重要的反应机理进行了分析.     

2-取代芳基-4-丙酸乙酯基-1,5-苯并二氮卓衍生物的高效合成

以取代的芳香醛和乙酰丙酸乙酯为原料,通过克诺维纳盖尔(Knoevenagel)缩合、亲核加成、环合、脱水等过程,快速高效地合成了8种未见文献报道的2-芳基-4-丙酸乙酯基-1,5-苯并二氮杂卓化合物.通过₁H NMR、₁₃C NMR、IR、MS和单晶衍射确定了其目标产物结构,对合成目标化合物的反应条件进行了较详细的研究,并提出了可能的反应机理。     

Cu(I)-promoted one-pot synthesis of 1,4-disubstituted 1,2,3-triazoles from anti-3-aryl-2,3-dibromopropanoic acids and nitrobenzaldehydes

A series of 1,4-disubstituted 1,2,3-triazoles were synthesized through a one-pot process from easily available anti-3-aryl-2,3-dibromopropanoic acids and nitrobenzaldehydes in hexamethylphosphoric triamide. Inexpensive copper(I) iodide was the catalyst.     

Cu(I)-catalyzed one-pot synthesis of 1,4-disubstituted 1,2,3-triazoles via nucleophilic displacement and 1,3-dipolar cycloaddition

An efficient method is described for the regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles in high yields from a variety of Baylis-Hillman acetates and terminal alkynes with sodium azide using CuI as a catalyst, in either water or polyethylene glycol (PEG). This procedure is operationally simple and environmentally benign. Polyethylene glycol (PEG) serves as an efficient reusable solvent with higher efficiency.     

On the lead tetraacetate oxidation of 4-amino-1,2,4-triazoles, 1-amino- and 2-amino-1,2,3-triazoles

Lead tetraacetate oxidation of 4-amino-1,2,4-triazoles, 1-amino- and 2-amino-1,2,3-triazoles affords mainly fragmentation to nitriles or acetylenes, even in the presence of intramolecularly attached double bonds.

---

Über die Bleitetraacetatoxidation von 4-Amino-1,2,4-triazolen, 1-Amino- und 2-Amino-1,2,3-triazolen (Kurze Mitteilung)

Zusammenfassung Bei der Oxidation von 4-Amino-1,2,4-triazolen, 1-Amino- und 2-Amino-1,2,3-triazolen mit Bleitetraacetat entstanden hauptsächlich Nitrile bzw. Acetylene durch Fragmentierung — trotz der Gegenwart von intramolekularen Doppelbindungen.

     

Quantum-chemical investigation of certain physicochemical properties of C-nitro-1,2,3-triazole and N-alkyl-4(5)-nitro-1,2,3-triazoles

Quantum-chemical calculations have been carried out on molecular electrostatic potentials, proton affinity in the gas phase, gas phase basicity, and pK _BH+ values in aqueous solution for C-nitro- and N-alkyl-4(5)-nitro-1,2,3-triazoles, and the relative stability of the isomeric N-alkyl-4(5)-nitrotriazoles (alkyl = Me, Et, i-Pr, t-Bu) in the gas phase and in aqueous solution. For all the studied substances in the gas phase the 2H-tautomer and the N(2)-isomers were considerably more stable than the corresponding N(1) compounds, and the 3H-tautomer and N(3)-isomer were the least stable. In aqueous solution 1- and 3-isomers had close values of energies, but in the case of C-nitro-1,2,3-triazole the 1H form became even more stable than the 2H-form. It was established which ring nitrogen atoms of 1,2,3-triazoles are protonated in the gas phase and in solution. The obtained data correlate well with the results of experimental investigations on the alkylation of 1,2,3-triazoles in acidic and basic media and of the experimental investigation on the alkylation of C-nitro-1,2,3-triazoles with diethyl sulfate carried out in the present work. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1816–1828, December, 2008.     

Simple synthesis of 1-substituted-4-vinyl-1,2,3-triazoles based on polystyrene-supported sulfonyl chloride

Polystyrene-supported but-3-ynyl sulfonate reagent has been developed and applied to the traceless solid-phase organic synthesis of 1-substituted-4-vinyl-1,2,3-triazoles by CuI-promoted 1,3-dipolar cycloaddition reaction with various organic azides and subsequent cleavage from the polymer support through elimination reaction mediated by 1.8-diazabicyclo[5,4,0]undec-7-ene (DBU). The advantages of this new synthetic method include simple operation and moderate to good yields of the products, as well as good stability of the reagent.     

Regioselective synthesis of fluoroalkylated [1,2,3]-triazoles by Huisgen cycloaddition

A series of fluoroalkylated 1,4-disubstituted [1,2,3]-triazoles were synthesized by the 1,3-dipolar cycloaddition of fluoroalkylated azides with terminal alkynes in the presence of Cu(I) salt as catalyst at room temperature. All the reactions were performed in highly regioselective with 1,4-disubstituted, no 1,5-disubstituted product was formed. For aryl or alkyl-alkyne, triethylamine should be used as ligand. But for propiolic ester(amide), triethylamine couldn’t be used, otherwise no products was formed. A mechanism of Cu(I) inserting the internal alkyne was suggested.     

Synthesis and properties of nitro-1,2,3-triazoles (Review)

Published data on methods for the synthesis of substituted 4(5)-nitro-1,2,3-triazoles and their properties are reviewed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 3–25, January, 2008.     

Sulfated tungstate a heterogeneous acid catalyst for synthesis of 4-aryl-NH-1,2,3-triazoles by 1,3-dipolar cycloaddition of nitroolefins with NaN3

A facile and new method for the synthesis of 4-aryl-NH-1,2,3-triazoles from nitroolefins and NaN₃ by 1,3-dipolar cycloaddition reaction, employing a mild solid inorganic acid sulfated tungstate as a heterogeneous catalyst, has been developed. The protocol emphasizes broad substrate scope with many functionalities, less reaction time, stability to open air, easy work-up, and with good to excellent yields.     

Facile and quick synthesis of 1-monosubstituted aryl 1,2,3-triazoles: a copper-free [3+2] cycloaddition

An efficient copper-free synthesis of 1-monosubstituted aryl 1,2,3-triazoles from sodium acetylide and aryl azides was developed, which was found suitable for various aryl azides and completed within 15 min at room temperature with moderate to excellent yields.