识别酪氨酸对映体的分子印迹电化学传感器

掺杂有模板分子L-苯基乳酸的聚吡咯膜通过循环伏安法聚合到碳糊电极表面。在0.1 mol.L-1NaOH溶液中恒电位过氧化处理,将此修饰电极先在D-酪氨酸溶液中富集,在pH2.0的0.1 mol.L-1KCl溶液中溶出。然后将修饰电极再置于0.1 mol.L-1NaOH溶液过氧化处理,以洗脱残留在电极上的D-酪氨酸,按同样方法测试L-酪氨酸。酪氨酸对映体在经过掺杂和过氧化洗脱的聚吡咯电极表面的溶出电位比裸碳糊电极的溶出电位向负方向移动了大约200 mV。在最优化的工作条件下,L-酪氨酸与D-酪氨酸溶出峰电流的比值可以达到2.18。     

分子印迹电化学传感器测定L-色氨酸的研究

报道了一种由溶胶-凝胶法制备的分子印迹电化学传感器,并用于L-色氨酸的测定.印迹聚合物是由四乙氧基硅烷、甲基三甲氧基硅烷、苯基三甲氧基硅烷等聚合而成,L-色氨酸为模板分子.通过循环伏安法验证了印迹膜与模板分子的结合和去除.该传感器对L-色氨酸具有良好的选择性以及高的灵敏度,线性范围为1.0×10-9～1.0×10-5m...     

纳米TiO2识别色氨酸对映体的研究

以纳米TiO2为基底,L-色氨酸(L-Trp)为模板分子,采用溶胶凝胶法合成L-Trp印迹的纳米TiO2。采用扫描电镜和红外光谱对印迹纳米TiO2和非印迹纳米TiO2进行表征,表明模板分子L-Trp成功地印迹到纳米TiO2中。采用1%的氨水溶液去除印迹的纳米TiO2中的模板分子L-Trp,纳米TiO2上留下与L-Trp相匹配的空穴。采用荧光分光光度法研究了具有L-Trp铸型的纳米TiO2对L-Trp和D-色氨酸(D-Trp)的分离效果。实验表明,模板分子L-Trp与钛前驱体的最佳投料摩尔比为1∶0.2,富集溶液pH值为6.0时,印迹纳米TiO2对L-Trp具有优异的选择吸附性,其分离选择系数为2.42,可实现对色氨酸对映体的识别。     

导电聚苯胺电极柱识别天冬氨酸对映体的研究

以苯胺为单体,L-天冬氨酸(L-Asp)为模板分子,采用化学氧化法合成了掺杂L-Asp的导电聚苯胺(PAn).将PAn作为固定相填充到多孔陶瓷管中制备导电PAn电极柱,并以此电极柱作为工作电极.循环伏安图表明PAn电极柱具有良好的电化学活性.在电极柱上施加-0.6 V的还原电位,PAn中掺杂的L-Asp发生脱掺杂,从而在PAn膜上留下了与L-Asp完全匹配的空穴.由于PAn具有掺杂/脱掺杂完全可逆的独特性能,因此对带有分子印迹的PAn电极柱施加0.5 V的正电位后,由于存在强烈的分子印迹作用,L-Asp在电极柱上被富集,而D-天冬氨酸(D-Asp)的富集效果远低于L-Asp,从而实现对Asp对映体的识别.     

巴比妥分子印迹毛细管电色谱整体柱的制备及分离特性研究

以巴比妥为模板分子,采用原位聚合法制备了具有特定识别性能的巴比妥印迹聚合物.采用电色谱模式考察了该色谱柱的识别性能.结果表明:这种整体柱对模板分子有很好的识别能力.     

悬浮聚合法制备磁性分子印迹聚合物微球

以苯胺和二甲基苯胺为模板分子、甲基丙烯酸(MAA)为功能单体、三羟甲基丙烷三丙烯酸酯(TRIM)为交联单体、Fe3O4为磁性组分,采用悬浮聚合法制备了磁性分子印迹聚合物微球(MMIPMs)。结果表明,改性Fe3O4微粒在MMIPMs中分散较好,MMIPMs在水性介质中对模板分子的选择吸附性较差,但在有机介质中有较好的选择吸附性。     

电聚合分子印迹传感器测定黑茶中芦丁的含量

以芦丁作为模板分子,邻氨基酚为功能单体,在金电极表面循环伏安法电聚合具有选择性识别芦丁的分子印迹膜。以Fe(CN)3-/4-作为探针分子,采用循环伏安法(CV)、差分脉冲伏安法(DPV)、交流阻抗法(EIS)研究了印迹膜的性能、分子印迹效应。优化了测定芦丁含量的条件,芦丁浓度在5.56×10-6~2.22×10-4mol·L-1范围内,其对数与峰电流呈线性关系,线性方程为:I(μA)=9.83 lgc(mol·L-1)+14.63,检出限为1.85×10-6mol·L-1,并比较了传感器对其结构相似化合物的选择性响应,发现传感器对芦丁检测具有良好的选择性。该传感器成功应用于黑茶中芦丁含量的测定。     

基于硼酸基功能化的磁性表面印迹聚合物制备及其对目标糖蛋白的识别

以硼酸基功能化的磁性Fe3O4纳米粒子(Fe3O4NPs)为载体,卵清蛋白(OB,一种糖蛋白)作模板分子,多巴胺(DA)为单体,采用表面印迹的方法,制备了一种磁性表面分子印迹聚合物纳米粒子。用平衡吸附实验研究了其吸附性能和识别选择性。结果表明,该分子印迹聚合物对目标糖蛋白(OB)具有较高的选择性和吸附量,并且具有良好的磁性,有利于进行快捷的磁性分离,这将为复杂生物样品中目标糖蛋白的专一性识别提供一种新的途径。     

天然氨基酸水溶液中聚吡咯的电化学合成及其表征

报道了各种天然α-氨基酸水溶液中电化学聚合吡咯获得氨基酸掺杂的聚吡咯.实验表明吡咯在酸性氨基酸电解质中的氧化聚合电位较低,速度较快;而在碱性氨基酸水溶液中几乎无法进行电化学聚合.在电化学聚合过程中,氨基酸既作为支持电解质,又作为对离子被掺杂到聚合物中.该聚吡咯的电导率被测定为0.3～1.0 S/cm,在酸性氨基酸溶液中得到的聚合物电导率明显高于酸性较弱的氨基酸溶液中得到的聚合物,同时聚合物还具有良好的电化学活性和电化学稳定性,在-0.5 V到+0.5 V区间有一对氧化还原峰,该氧化还原峰的形状和特性在100次循环后基本保持不变.通过扫描电镜和透射电镜照片可以看出,不同种氨基酸的掺杂对聚吡咯的形貌具有影响,由于氨基酸的软模板效应,在数种氨基酸水溶液中能制得具有纳米纤维结构的聚吡咯.     

分子印迹整体柱快速分离烟酰胺及烟酸

以药物烟酰胺为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,甲苯和正十二醇的混合溶液为致孔剂,采用原位聚合法制备了具有特定识别性能和分离能力的分子印迹聚合物,并将其作为高效液相色谱固定相,实现了模板分子与烟酸在2 min内的快速分离。在规格为50 mm×4.6 mm i.d.色谱柱上,以纯水为流动相（流速为7.0 mL/min）、操作温度为室温的色谱条件下,模板分子与烟酸的分离度达1.8。讨论了流动相中有机溶剂含量、醋酸及碱含量和流速对分离的影响。结果表明,原位聚合法制备的整体分子印迹聚合物在以纯水作流动相时对模板分子与其类似物有快速分离能力,这对于体内药物的分离富集研究具有很好的应用前景。     

Electrochemical chiral recognition of tryptophan using a glassy carbon electrode modified with β-cyclodextrin and graphene

We report on a method for electrochemical enantioselective recognition of tryptophan (Trp) enantiomers. It is based on competitive host-guest interaction between a deoxy-(2-aminoethylamino)-β-cyclodextrin (CD) bound to graphene nanosheets and the Cu(II) complexes of the Trp enantiomers via a ligand exchange mechanism. Chiral recognition was investigated via cyclic voltammetry and electrochemical impedance spectroscopy. The results reveal that the CD bound to graphene displays a stronger interaction with the Cu(II) complex of L-Trp than to that of D-Trp. The method was applied to the determination of the ratio of Trp enantiomers in mixtures.

"Two-in-one" fabrication of Fe3O4/MePEG-PLA composite nanocapsules as a potential ultrasonic/MRI dual contrast agent

A new method for the fabrication of Fe(3)O(4) nanoparticles enveloped by polymeric nanocapsules is proposed. This method is characterized by combining a double emulsification with the interfacial coprecipitation of iron salts to form Fe(3)O(4)/polymer composite nanocapsules in a single step. To demonstrate the viability of this approach, methoxy poly(ethylene glycol)-poly(lactide) (MePLEG) was chosen as the shell material for Fe(3)O(4)/MePLEG nanocapsules. In addition to the versatility offered for fabricating nanocapsules with different shell materials, the method was found to be convenient for adjusting the magnetite content of the nanocapsules from 0 to 43%. In addition to their confirmed T(2)-weighted magnetic resonance imaging (MRI) enhancement, the resultant composite nanocapsules display much more obvious acoustic responses than MePLEG nanocapsules in an acoustic investigation. Furthermore, the low toxicity of these composite nanocapsules, as confirmed by our study, combined with their magnetic and acoustic properties ensure that these composite nanocapsules have great potential in acting as ultrasonic/MRI dual contrast agents.     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

Luminescent and magnetic Fe3O4/Py/PAM nanocomposites for the chromium(VI) determination

A novel luminescent and magnetic Fe(3)O(4)/pyrene/polyacrylamide (Fe(3)O(4)/Py/PAM) nanocomposite has been prepared under ultrasonic radiation. This magnetic nanocomposite combined with pyrene would lead to a special functional magnetic luminescent composite that enjoys both the advantages of magnetic nanoparticles of Fe(3)O(4) and fluorescence nanoparticles of pyrene. Taking advantage of the magnetic property of Fe(3)O(4) nanocomposites, we can separate Fe(3)O(4)/Py/PAM nanocomposites from solution easily just by using a permanent magnet. Based on the fluorescence quenching of Fe(3)O(4)/Py/PAM nanocomposites by Cr(VI), a method for the selective determination of Cr(VI), without separation of Cr(III) in water, was developed. Under optimal experimental conditions, a limit of detection of 0.01 microg mL(-1) was achieved. The calibration curve was linear over the concentration range of 0.1-14.0 microg mL(-1) with a correlation coefficient of 0.9975. The proposed method has been applied to the selective quantification of Cr(VI) in synthetic samples and wastewater samples with the satisfactory results.     

1,1-二苯基乙烯存在下无皂乳液聚合制备磁性复合微球

报道了一种制备磁性复合微球的方法——DPE法.在自由基控制剂1,1-二苯基乙烯(DPE)存在条件下,甲基丙烯酸甲酯(MMA)与丙烯酸(AA)发生无皂乳液聚合,制备能与Fe3O4粒子相螯合的活性短链共聚物,加入Fe3O4粒子把短链共聚物引到其表面,引发其它单体继续在Fe3O4粒子表面聚合,制备磁性复合微球.研究了AA、DPE、引发剂及Fe3O4粒子加入量等对制备磁性复合微球的影响.并在此基础上,对优化后工艺制备的磁性复合微球进行了TEM、TGA及磁响应性表征.结果表明,利用该新的方法制备出了磁含量为20%、比饱和磁化强度为32.2emu/g、平均粒径为265nm且表面不含任何杂质的磁性复合微球.     

导电聚苯胺与Fe3O4磁性纳米颗粒复合物的合成与表征

对十二烷基苯磺酸(DBSA)掺杂的导电聚苯胺(PAn-DBSA)的氯仿溶液,在pH为中性的条件下,采用“修饰-再掺杂(Modification-re-doped)法”合成了含有Fe₃O₄磁性纳米颗粒的导电聚苯胺复合物的有机溶液.用FTIR,XRD,TEM,UV-Vis和SQUID等对所得复合物进行了表征,结果表明,该复合物呈现超顺磁性和半导体的导电性,并具有较好的透明性.     

Three-layer composite magnetic nanoparticle probes for DNA

A method for synthesizing composite nanoparticles with a gold shell, an Fe3O4 inner shell, and a silica core has been developed. The approach utilizes positively charged amino-modified SiO2 particles as templates for the assembly of negatively charged 15 nm superparamagnetic water-soluble Fe3O4 nanoparticles. The SiO2-Fe3O4 particles electrostatically attract 1-3 nm Au nanoparticle seeds that act in a subsequent step as nucleation sites for the formation of a continuous gold shell around the SiO2-Fe3O4 particles upon HAuCl4 reduction. The three-layer magnetic nanoparticles, when functionalized with oligonucleotides, exhibit the surface chemistry, optical properties, and cooperative DNA binding properties of gold nanoparticle probes, but the magnetic properties of the Fe3O4 inner shell.     

Hierarchically porous Fe2O3/CuO composite monoliths: Synthesis and characterization

In this paper, hierarchically porous Fe2O3/CuO composite monoliths were first successfully synthesized by a mild method using silica monoliths as templates. The structure of composite monoliths was characterized by X-ray diffraction, scanning electron microscopy, nitrogen adsorption-desorption. The results indicated that the molar ratio of Fe to Cu had a great influence on the crystal phase of Fe2O3, pore size and the structure of the macroporous wall. The Fe2O3/CuO composite monoliths consist of hierarchically macroporous and mesoporous structure, while the sample with the Fe/Cu molar ratio of 2 : 1 possesses tighter wall structure than other samples. It is expected that as-prepared Fe2O3/CuO composite monoliths have potential applications in several fields as catalysts, catalyst supports, chemical sensors and high-performance liquid chromatography (HPLC).     

Hierarchically porous Fe_2O_3 /CuO composite monoliths:Synthesis and characterization

In this paper,hierarchically porous Fe2O3 /CuO composite monoliths were first successfully synthesized by a mild method using silica monoliths as templates.The structure of composite monoliths was characterized by X-ray diffraction,scanning electron microscopy,nitrogen adsorption-desorption.The results indicated that the molar ratio of Fe to Cu had a great influence on the crystal phase of Fe2O3,pore size and the structure of the macroporous wall.The Fe2O3 /CuO composite monoliths consist of hierarchically macroporous and mesoporous structure,while the sample with the Fe/Cu molar ratio of 2:1 possesses tighter wall structure than other samples.It is expected that asprepared Fe2O3/CuO composite monoliths have potential applications in several fields as catalysts,catalyst supports,chemical sensors and high-performance liquid chromatography (HPLC).