Effect of water-soluble polymers, polyethylene glycol and poly(vinylpyrrolidone), on the gelation of aqueous micellar solutions of Pluronic copolymer F127

The micellization of F127 (E(98)P(67)E(98)) in dilute aqueous solutions of polyethylene glycol (PEG6000 and PEG35000) and poly(vinylpyrrolidone) (PVP K30 and PVP K90) is studied. The average hydrodynamic radius (r(h,app)) obtained from the dynamic light scattering technique increased with increase in PEG concentration but decreased on addition of PVP, results which are consistent with interaction of the micelles with PEG and the formation of micelles clusters, but no such interaction occurs with PVP. Tube inversion was used to determine the onset of gelation. The critical concentration of F127 for gelation increased on addition of PEG and of PVP K30 but decreased on addition of PVP K90. Small-angle X-ray scattering (SAXS) was used to show that the 30 wt% F127 gel structure (fcc) was independent of polymer type and concentration, as was the d-spacing and so the micelle hard-sphere radius. The maximum elastic modulus (G(max)(')) of 30 wt% F127 decreased from its value for water alone as PEG was added, but was little changed by adding PVP. These results are consistent with the packed-micelles in the 30 wt% F127 gel being effectively isolated from the polymer solution on the microscale while, especially for the PEG, being mixed on the macroscale.     

Synthesis and pH-sensitive micellization of doubly hydrophilic poly(acrylic acid)-b-poly(ethylene oxide)-b-poly(acrylic acid) triblock copolymer in aqueous solutions

A doubly hydrophilic triblock copolymer poly(acrylic acid)-b-poly(ethylene glycol)-b-poly(acrylic acid) (PAA-b-PEO-b-PAA) with M _w/M _n = 1.15 was synthesized by atom transfer radical polymerization of t-butyl acrylate (tBA), followed by acidolysis of the PtBA blocks. The pH-sensitive micellization of PAA-b-PEO-b-PAA in acidic solution was investigated by potentiometric titration, fluorescence spectrum, dynamic light scattering and zeta potential. The pK _a was 6.6 and 6.0 in deionized water and in 0.1 mol/L NaCl solution, respectively. The copolymer formed micelles composed of a weakly hydrophobic core of complexed PAA and PEO and a hydrophilic PEO shell in 1 mg/mL solution at pH < 5.5 due to hydrogen bonding. The critical micelle concentration was 0.168 mg/mL at pH 2.0. At pH < 4.5, steady and narrow distributed micelles were formed. Increasing pH to 5.0, unsteady and broad distributed micelles were observed. At pH > 5.5, the micelle was destroyed owing to the ionization of the PAA blocks.     

Effect of poly(γ‐glutamic acid) on the gelation of Pluronic F127

The gelation of Pluronic F127 aqueous solution was investigated in the presence of sodium poly(γ‐glutamate) (PGA). The gelation temperature was determined based on the tube inversion technique. The gelation temperature increased greatly when the ratio of PGA to F127 was 0.2, and then decreased at higher ratios. The enthalpy of gelation (ΔH_gel) was calculated based on the model of Eldridge and Ferry. A splitting in the model was observed when the PGA/F127 ratio was 0.2 which yielded both a maximum and a minimum of ΔH_gel. These results indicate that PGA can significantly affect the gelation of F127. Copyright © 2008 John Wiley & Sons, Ltd.     

Fluorescence of commercial Pluronic F127 samples: Temperature-dependent micellization

We present a novel approach of using the butylated hydroxytoluene (BHT) antioxidant found in commercial Pluronic F127 samples as a marker of polymer aggregation. The BHT marker was compared to the pyrene dye and static light scattering methods as a way to measure the critical micelle concentration (CMC) and critical micelle temperature (CMT). The n→π(?) transitions of BHT are sensitive to the microenvironment as demonstrated by plotting the fractional intensities of its excitation (≈280nm) and emission (≈325nm) peaks. BHT is more sensitive to changes in temperature than concentration. The partition coefficient increases ≈40-fold for pyrene compared to ≈2-fold for BHT when the temperature is increased from 25 to 37°C. CMT values determined using the BHT fluorescence decrease with increasing F127 concentration. Our results show that BHT can be used as a reliable marker of changes in the microenvironment of Pluronic F127.     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

Microstructure transition of hydrophilic modified ibuprofen and Pluronic copolymer F127 complexes

The effect of the aggregation state of Pluronic copolymer (PEO₁₀₀–PPO₆₅–PEO₁₀₀, F127) and the concentration of hydrophilic modified ibuprofen (Ibuprofen–PEG800, IP800) on the interaction between F127 and IP800 was systematically investigated by nuclear magnetic resonance, dynamic light scatter (DLS), surface tension, and freeze-fractured transmission electron microscopy. In the solution of F127 unimers (5 °C), F127 unimers tended to wrap around IP800 micelles, and the binding model of F127 unimers to IP800 micelles transferred from wrapping around to partly threading through with increasing IP800 concentration. The latter binding model was straightly confirmed by nuclear Overhauser enhancement spectroscopy. As the aggregation state of F127 is in the beginning of the micellization (20 °C), the addition of IP800 significantly promoted the micellization of F127 to form the F127/IP800 complex with F127 micelles as the skeleton called the F127–micelle complex. The sudden decrease of the size obtained from DLS stemmed from the disruption of the F127–micelle complex and accompanying rehydration of PPO which is weaker compared with refs. The amount of IP800 to disintegrate the F127–micelle complex increased in the F127–micelle-dominated solution (40 °C) compared to that at 20 °C.     

Effects of a PPO-PEO-PPO triblock copolymer on micellization and gelation of a PEO-PPO-PEO triblock copolymer in aqueous solution

The effects of a PPO-PEO-PPO triblock copolymer (25R4, PO(19)-EO(33)-PO(19)) on thermoreversible micellization and gelation properties of a PEO-PPO-PEO triblock copolymer (F108, EO(133)-PO(50)-EO(133)) in water were studied by means of micro-DSC and rheology. A complete, mirror-image like thermoreversible behavior has been observed for all of the samples with various molar ratios of 25R4 to F108. At a given concentration of F108, the addition of 25R4 results in the salt-out like effect on the primary micellization of F108; that is, the critical micellization temperature (CMT) of F108 shifts to lower temperatures with increasing the content of 25R4. The enthalpy changes for micellization are a linear function of the 25R4/F108 molar ratio at a fixed F108 concentration. Beyond the primary peak for the micellization of F108, a secondary peak or shoulder is observed in the DSC curves for the samples with the higher 25R4/F108 molar ratios, due to the formation of the hydrophobic aggregates from both the PPO blocks of F108 and those (i.e., PPO blocks) of 25R4. Furthermore, as an example, the dynamic viscoelastic properties of 18 wt % F108 solutions with various contents of 25R4 have been examined. It is found that, when the 25R4/F108 molar ratio < or =1, 25R4 does not affect the gelation of F108 notably. When the ratio is greater than 1, however, the formation of the 25R4-bridged micellar aggregates delays the gelation of F108 significantly. A schematic model has been proposed to explain the mechanism for the 25R4-influenced micellization and gelation of F108.     

The effect of n-, s- and t-butanol on the micellization and gelation of Pluronic P123 in aqueous solution

Thermodynamic and kinetics studies for adsorption of Pt ions complexes from the chloride solutions obtained by leaching chlorinated spent automotive catalysts on anionic exchange resin Diaion WA21J were carried out. It was found that only Si, Pt, Rh and Pd from the solution were selectively adsorbed on the resin Diaion WA21J more strongly. The adsorption equilibrium time for Pt ions was about 20 h. The isothermal adsorption of Pt ions was found to fit Langmuir, Freundlich and DKR models. The maximum monolayer adsorption capacities Q(max) and X(m) of Pt ions on the resin based on Langmuir and DKR model were 4.85, 5.36 and 5.69 mg/g as well as 5.01, 5.63 and 5.98 mg/g for temperatures 18°C, 28°C and 40°C, respectively. The apparent adsorption energy E(ad) based on DKR model were -11.79, -11.04 and -11.04 kJ/mol for the temperatures 18°C, 28°C and 40°C, respectively. Ion exchange was the mechanism involved in the adsorption process. The adsorption of Pt ions on the resin underwent pseudo-first-order kinetic process, and the apparent adsorption activation energy E(a,1) was 12.6 kJ/mol. The intraparticle diffusion of Pt ions was a main rate-controlling step in most of time of adsorption process.     

Thermodynamics of micellization of beta-sheet forming poly(acrylic acid)-block-poly(l-valine) hybrids

The phase behavior and thermodynamic of micellization of three hybrid poly(acrylic acid)- block-poly( l-valine), namely PAA 40- b-PLVAL 100, PAA 80- b-PLVAL 100, and PAA 80- b-PLVAL 80, were investigated. beta-sheet formation in these polymeric systems resulted in a dominant enthalpic micellization process that exhibited an upper critical solution temperature (UCST). Micelle dissociation at higher temperatures is attributed to the disruption of favorable hydrogen bonds in the micellar core. Separation of hydrogen bond contributions to the micellization thermodynamics through the addition of urea as an external denaturing agent, revealed a shift from a dominant enthalpic contribution of PLVAL segments at low degree of deprotonation (alpha), where significant beta-sheet is formed, to a balanced enthalpy and entropy contributions at high alpha. At high alpha, an enhanced "water cage" hydration of unimers was observed due to the formation of water-PLVAL hydrogen bonds. Hydrophobic forces played an indirect role in enhancing the compactness of the hydrophobic core, which enhanced the strength of hydrogen bonds in the beta-sheet structures.     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

The surface tension of poly(acrylic acid) in aqueous solution

Summary Surface tension has been measured of polyacrylic acidwater solutions with pH 3–11. Until approximately pH 4.6 corresponding to 10% neutralization, PAA-solutions are surface active and inactive at higher pH, time dependence of equlibrium surface tension is analysed. Non-ionized neutral chain segments are surface active, their diffusion to surface is rate determining.

---

Zusammenfassung Es wurde die Oberflächenspannung von wäßrigen Polyacrylsäure-Lösungen der pH-Werte von 3–11 gemessen. Bis zu einem pH-Wert von etwa 4.6, d. h. 10% Neutralisation, sind die Lösungen oberflächenaktiv, bei höheren pH-Werten inaktiv. Es wird die Zeitabhängigkeit der Einstellung der Gleichgewichtsoberflächenspannung analysiert. Nicht ionisierte, neutrale Kettensegmente sind oberflächenaktiv. Diffusion zur Oberfläche ist der zeitbestimmende Faktor.

     

Colloidal aqueous dispersion of polyaniline nanotubes grafted non-covalently with poly(ethylene oxide)-block-poly(acrylic acid) copolymer

Polyaniline (PANI) nanotubes were prepared by oxidative polymerization of aniline in the presence of two structure-directing agents—salicylic acid (SA) and sodium dodecyl sulfate (SDS). When using only SA, mainly aggregated nanotube dendrites or coral-like structures have been obtained. Addition of a very small amount of the surfactant SDS, much less than the critical micelle concentration, results in substantial reduction of the aggregated nanotube morphology on the account of isolated PANI nanotubes, which is the favorable structure from the point of view of further modification. In order to make the isolated nanotubes water dispersible, their surface was modified by complex formation (non-covalent grafting) with hydrophilic poly(ethylene oxide)-block-poly(acrylic acid) copolymer. These water-dispersible PANI nanotubes might be good candidates for some biochemical and biomedical applications.     

Time-dependent Cu-induced gelation of poly(ethylene-alt-maleic acid) in aqueous solution

The complexation of Cu²⁺ ions with an alternating copolymer of maleic acid (MAc) and ethylene in aqueous solution was followed through turbidimetry and absorption spectrophotometry as a function of the polymer concentration and the metal ion-to-polymer molar ratio, r. The introduction of Cu²⁺ ions was performed in aqueous solution through neutralization of the polyacid with Cu(OH)₂ powder. A gelation window between homogeneous and phase-separated solutions was observed in the phase diagram of the polymer/Cu²⁺ mixture and the viscoelastic properties of the hydrogels were evaluated through rheology measurements. It is found that the stiffness of the hydrogels can be tuned by the polymer concentration and the mixing ratio r. Moreover, the stiffness of the hydrogels increases substantially with time. In fact, this time evolution may be as long as one month or longer if the composition of the aqueous solution is close to the gelation threshold. The gelation properties can be qualitatively explained from the possible formation of binuclear polymer/Cu²⁺ complexes in aqueous solutions, as indicated from the absorption spectroscopy results.     

Effect of copolymer composition on interpolymer complex formation of (co)poly(vinyl ether)s with poly(acrylic acid) in aqueous and organic solutions

The complex formation between vinyl ether of poly(ethylene glycol‐co‐vinyl butyl ether) with poly(acrylic acid) has been considered in aqueous and isopropanol solutions. The effect of copolymer composition on the complex formation process was clarified. It has been shown that the incorporation of hydrophobic fragments into macromolecules enhances the hydrophobic stabilization of polycomplexes in aqueous solutions. In organic media this effect disappears. The stability of polycomplexes formed both in aqueous and in organic solutions in respect to the addition of dimethylformamide has been studied.     

聚醚树枝体－聚丙烯酸嵌段共聚物的水溶液自组装行为

应用UV－Vis、荧光、光物理探针、动态激光光散射和透射电镜(TEM)方法研究了聚醚树枝体与聚丙烯酸两亲嵌段共聚物(Dendr,PE-PAA)在水溶液中分子自组装行为。实验结果表明通过聚醚树枝体嵌段的疏水作用,易缔合形成聚集体,具有很低(10^-6～10^-7mol·L^-1)的临界缔合浓度(cac)。透过电镜观察到聚集体具有双层膜结构的球状、单室囊泡。临界缔合浓度(cac)以及聚集体的大小对枝状体的代数(Gi)及线性体的聚合度(n)具有明显的依赖关系。     

Concentration, temperature, and salt-induced micellization of a triblock copolymer Pluronic L64 in aqueous media

The effect of copolymer concentration, temperature, and sodium halides (NaI, NaBr, NaCl, and NaF) on micellization and micellar properties of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO13PO30EO13), was examined by different methods such as dye spectral change, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle neutron scattering (SANS), dynamic light scattering (DLS), viscosity, and cloud point (CP). Temperature/polymer concentration/salt dependent aggregation behavior of L64 was observed. The data on critical micelle concentration (CMC), critical micelle temperature (CMT), (CP), micelle size, and shape are reported. The Fourier transform infrared (FTIR) showed temperature dependent changes in C-O-C stretching variation band towards higher wave numbers and broadening of band width during the micellization process; this was attributed to increase in proportion of the anhydrous methyl groups, while the proportion of the hydrated methyl groups was decreased. Differential scanning calorimetry (DSC) provides CMTs and CPs from the same experiment. CMC values derived from dye spectral change, decrease significantly with the addition of salt. The increases in salt/copolymer concentration lower the onset temperature of micellization (CMT). Halide anions influence both CMT and CP in the order of F- > Cl- > Br- > I- when total salt and copolymer concentration kept constant. SANS results show the increase of inter-micellar interaction due to the increase in temperature/salt concentration; this is supported by viscosity data.     

Pulse radiolysis of poly(acrylic acid) in deoxygenated aqueous solution

Absorption spectra of macroradicals formed by irradiation of poly (acrylic acid) in aqueous solution are presented and the role of intermediates of water radiolysis in their formation is discussed. Both the rate constant of ·OH reaction with the polymer and the process of macroradicals decay are shown to be strongly dependent on pH. The macroradicals formed in dissociated polymer molecules have a lifetime of several minutes.     

Photolysis-induced micellization of a poly(4-tert-butoxystyrene)-block-polystyrene diblock copolymer

A novel micellization induced by photolysis was attained using a poly(4-tert-butoxystyrene)-block-polystyrene diblock copolymer (PBSt-b-PSt). BSt-b-PSt showed no self-assembly in dichloromethane and existed as isolated copolymers. Dynamic light scattering demonstrated that the copolymer produced spherical micelles in dichloromethane by the irradiation with a high-pressure mercury lamp in the presence of photoacid generators, such as bis(alkylphenyl)iodonium hexafluorophosphate (BAI), diphenyliodonium hexafluorophosphate (DPI), and triphenylsulfonium triflate (TPS). The irradiation time to promote the micellization increased in the order of BAI < DPI < TPS, depending on the UV absorption intensity of the photoacid generators. The efficiency to promote the micellization was also dependent on the block length of the copolymer. Under an identical PBSt block length, the copolymer with the shorter PSt block length more easily formed micelles. The ¹H NMR analysis confirmed that the PBSt-b-PSt copolymer was converted into poly(4-vinyl phenol)-block-PSt, resulting in micelles by self-assembly.