Parameter-dependent photon echo induced in CdSe/ZnS quantum dot quantum well

The two pulse photon echo (2PPE) phenomena induced by the 1s-1s electronic transition in CdSe/ZnS quantum dot quantum well (QDQW) has been studied by employing semiconductor Bloch equations. The energy eigenvalues and eigenfunctions of electrons and holes have been obtained by solving the stationary Schrödinger equation under effective-mass approximation. The Coulomb interaction, which changes with the size variation of QDQW, has been calculated and analyzed as a perturbation. The variations of the electric transition dipole moment and the energy interval with the changing of the size and structure of the QDQW have also been obtained. It has been shown from the numerical calculation results that the efficiency of 2PPE can be controlled by the variation of the size and structure of the QDQW and the mechanism has been explained in terms of the quantum size confined effect (QSCE) theory.     

Parameter-dependent optical nutation in PbSe/CdSe/ZnS quantum-dot

The eigenenergies and eigenfunctions of the spherical PbSe/CdSe/ZnS quantum-dot with the core-shell-shell structure and the electric dipole moment between the a _1s state (the lowest state of the system) and b _1p state (the lowest p state above the first potential) have been calculated by using the rotational wave approximation and the effective mass approximation. The optical nutation signal induced by the transition between these two energy levels has been calculated based on the optical Bloch equations. In particular, the influence of the core’s radius increasing and the CdSe shell’s thickness increasing has been investigated respectively. It is shown from the numerical calculation results that the optical nutation signals are dependent on the size and the structure of the quantum-dot. Moreover, the quantum size-dependent Rabi frequency has been analyzed.     

CdSe/HgSe/CdSe量子点量子阱(QDQW)晶粒的光学性质和电子结构

以CdSe纳米晶体为核,用胶体化学的方法,通过化学替代反应,获得了不同阱层或不同垒层的CdSeHgSeCdSe量子点量子阱(QDQW)晶体.紫外可见光吸收谱研究表明,通过调节QDQW中间HgSe阱层的厚度从0.9nm至0,可以调节QDQW颗粒的带隙从1.8变化至2.1eV,实现QDQW纳米晶体的剪裁.光致荧光(PL)谱研究显示,QDQW形成后,CdSeHgSe纳米颗粒表面态得到钝化,显现出发光强度加强的带边荧光峰.利用有效质量近似模型,对QDQW晶粒内部电子的1s—1s态进行了估算,估算结果总体趋势与实验数据相符 关键词： 量子点量子阱晶体 能带剪裁 加强的带边荧光峰     

Characteristics of degenerated four wave mixing in ZnS/CdSe/ZnS quantum dot quantum well with multi-shell structure

The wave functions and eigenenergies of electrons in ZnS/CdSe/ZnS cylindrical quantum dot quantum well (QDQW) have been calculated by solving a three-dimensional nonlinear Schrödinger equation, in the framework of the effective-mass envelope-function theory. The third-order susceptibilities of the degenerated four waves mixing (DFWM) have been calculated theoretically by means of compact density matrix. The third-order susceptibilities as the function of the shell radius R₂, R₃ have been analyzed. The results show that the magnitude of nonlinear susceptibility is increased with the increasing of well radius. The resonance frequency of the photon have a shift when R₂ or R₃ is increasing and the relation between nonlinear susceptibility and relaxation time has also been studied.     

Well width‐dependent electron Raman scattering in ZnS/CdSe cylindrical quantum dot quantum well

Electron Raman scattering (ERS) is investigated in ZnS/CdSe cylindrical quantum dot quantum well (QDQW). The differential cross section (DCS) is calculated as a function of the scattering frequency and the sizes of QDQW. Single parabolic conduction and valence bands are assumed. Different scattering configurations are discussed and the selection rules for the processes are also studied. Singularities in the spectrum are found and interpreted. The ERS studied here can be used to provide direct information about the electron band structure of these systems. Copyright © 2008 John Wiley & Sons, Ltd.     

Core-shell structure and quantum effect of CdSe/HgSe/CdSe quantum dot quantum well

Core-shell structure CdSe/HgSe/CdSe quantum dot quantum well (QDQW) nanocrystals were firstly synthesized and well controlled by colloidal chemical methods. High-resolution transmission electron microscope (HRTEM) photographs show that the CdSe core has a wurtzite crystal structure and the shell of HgSe has a hexagonal structure. The enhancement and blue shift of photoluminescence (PL) peak was observed which was attributed to the quantum confinement effect of carriers in the HgSe well.     

The electronic and optical properties of a triexciton in CdSe/ZnS core/shell quantum dot nanocrystals

In the study, we aim to investigate the electronic and optical properties of single excitons, biexcions and triexcitons in a CdSe/ZnS core/shell quantum dot nanocrystal. The electronic structure has been determined by solving of the Poisson–Schrödinger equations self-consistently. In calculations, the exchange-correlation effects between identical particles have been taken into account in the frame of the local density approximation. We have demonstrated that the optical properties of triexciton systems are remarkably different from the single and biexciton systems. Absorption peaks or transition energies of the triexciton system are well separated from those of single- and bi-exciton systems. We have observed that the core-radius dependent transition energy variations of triexcitons are higher when compared with single- and bi-excitonic systems. The transition energy shifts of double and triple excitons with respect to the single exciton have been calculated as a function of the core radius and we have shown that the energy shifts are inversely proportional with the radius. We have also investigated the radius-dependent changes in binding energies and lifetimes of the structures and the comparative results have been discussed in a detail manner.     

Fluorescence correlation spectroscopy of CdSe/ZnS quantum dot optical bioimaging probes with ultra-thin biocompatible coatings

The colloidal stabilities and emission properties of CdSe/ZnS quantum dot (QD) optical probes capped with a variety of thin, hydrophilic surface coatings were studied using confocal fluorescence correlation spectroscopy. These coatings are based on mercaptoethanol, mercaptopropionic acid (with and without conjugated aminoethoxyethanol), lipopolymers (DSPE-PEG2000), cysteine (Cys), and a variety of Xaa-Cys dipeptides. The study shows that QDs with thin hydrophilic coatings can be designed that combine good colloidal stability and excellent emission properties (brightness). Furthermore, there is a general correlation between colloidal stability and brightness. The experiments reported illustrate that QDs with multiple types of thin coatings can be created for optical imaging applications in a biological environment while also maintaining a size below 10 nm.     

Size-dependent optical properties and carriers dynamics in CdSe/ZnS quantum dots

Size-dependence of optical properties and energy relaxation in CdSe/ZnS quantum dots （QDs） were investigated by two-colour femtosecond （fs） pump-probe （400/800 nm） and picosecond time-resolved photoluminescence （ps TRPL） experiments. Pump-probe measurement results show that there are two components for the excited carriers relaxation, the fast one with a time constant of several ps arises from the Auger-type recombination, which shows almost particle sizeindependence. The slow relaxation component with a time constant of several decades of ns can be clearly determined with ps TRPL spectroscopy in which the slow relaxation process shows strong particle size-dependence. The decay time constants increase from 21 to 34 ns with the decrease of particle size from 3.2 to 2.1 nm. The room-temperature decay lifetime is due to the thermal mixing of bright and dark excitons, and the size-dependence of slow relaxation process can be explained very well in terms of simple three-level model.     

Reflective photoluminescence fiber temperature probe based on the CdSe/ZnS quantum dot thin film

A reflective fiber temperature sensor based on the optical temperature dependent characteristics of a quantum dots (QDs) thin film is developed by depositing the CdSe/ZnS core/shell quantum dots on the SiO₂ glass substrates. As the temperature is changed from 30 to 200°C, the peak wavelengths of PL spectra from the sensing head increase linearly with the temperature, while the peak intensity and the full width at half maximum (FWHM) of PL spectra vary exponentially according to the specific physical law. Using the obtained temperature-dependent peak-wavelength shift, the average resolution of the designed fiber temperature sensor can reach 0.12 nm/°C, while it reaches 0.056 nm/°C according to the FWHM of PL spectrum.     

Patterned mist deposition of tri-colour CdSe/ZnS quantum dot films toward RGB LED devices

In this experiment a technique of mist deposition was explored as a way to form patterned ultra-thin-films of CdSe/ZnS core/shell nanocrystalline quantum dots using colloidal solutions. The objective of this study was to investigate the feasibility of mist deposition as a patterning method for creating multicolour quantum dot light emitting diodes. Mist deposition was used to create three rows of quantum dot light emitting diodes on a single device with each row having a separate colour. The colours chosen were red, green and yellow with corresponding peak wavelengths of 620 nm, 558 nm, and 587 nm. The results obtained from this experiment show that it is possible to create multicolour devices on a single substrate. The peak brightnesses obtained in this experiment for the red, green, and yellow were 508 cd/m, 507 cd/m, and 665 cd/m, respectively. The similar LED brightness is important in display technologies using colloidal quantum dots in a precursor solution to ensure one colour does not dominate the emitted spectrum. Results obtained in-terms of brightness were superior to those achieved with inkjet deposition. This study has shown that mist deposition is a viable method for patterned deposition applied to quantum dot light emitting diode display technologies.     

Size-dependent electronic and optical properties of an exciton in CdSe/CdS/CdSe/CdS multilayer spherical quantum dot

The electronic and optical properties of a single exciton in a CdSe/CdS/CdSe/CdS quantum dot is studied by using effective mass approximation with parabolic confinement. The Coloumbic interaction between electron and hole is included by Hartree potential. A self-consistent technique is used to calculate the energy eigenvalue and wavefunction of exciton. Based on this approximation we investigate the effect of core size, shell thickness, well width on exciton binding energy, absorption spectra, and oscillator strength. The results provide the tuning possibility of electronic and optical properties of multilayer quantum dot with layer thickness.     

Experimental investigation of energy transfer between CdSe/ZnS quantum dots and different-sized gold nanoparticles

Hybrid nanostructures of quantum dots(QDs) and metallic nanostructure are attractive for future use in a variety of optoelectronic devices. For photodetection applications, it is important that the photoluminescence (PL) of QDs is quenched by the metallic nanostructures. Here, the quenching efficiency of CdSe/ZnS core-shell quantum dots (QDs) with different sized gold nanoparticles (NPs) films through energy transfer is investigated by measuring the PL intensity of the hybrid nanostructures. In our research, the gold NPs films are formed by the post-annealing of the deposited Au films on the quartz substrate. We find that the energy transfer from the QDs to the Au NPs strongly depends on the sizes of the Au NPs. For CdSe/ZnS QDs direct contact with the Au NPs films, the largest energy transfer efficiency are detected when the resonance absorption peak of the Au NPs is nearest to the emission peak of the CdSe/ZnS QDs. However, when there is a PMMA spacer between the QDs layer and the Au NPs films, firstly, we find that the energy transfer efficiency is weakened, and the largest energy transfer efficiency is obtained when the resonant absorption peak of the Au NPs is farthest to the emission peak wavelength of CdSe/ZnS QDs. These results will be useful for the potential design of the high efficiency QDs optoelectronic devices.     

ZnCdSe量子阱/CdSe量子点耦合结构中的激子隧穿过程

用室温光致发光谱和飞秒脉冲抽运探测方法对不同垒宽的ZnCdSe量子阱/ZnSe/CdSe 量子点新型耦合结构中激子隧穿过程进行研究，观察到激子从量子阱到量子点的快速隧穿过 程.在ZnSe垒宽为10nm, 15nm, 20nm时，测得激子隧穿时间分别为1.8ps, 4.4ps, 39ps. 关键词： ZnCdSe量子阱 CdSe量子点 激子 隧穿     

Exciton tunnelling in ZnCdSe quantum well/CdSe quantum dots

Exciton tunnelling through a ZnSe barrier layer of various thicknesses is investigated in a Zn_0.72Cd_0.28Se/CdSe coupled quantum well/quantum dots (QW/QDs) structure using photoluminescence (PL) spectra and near resonant pump-probe technique. Fast exciton tunnelling from quantum well to quantum dots is observed by transient differential transmission. The tunnelling time is 1.8, 4.4 and 39 ps for barrier thickness of 10, 15 and 20 nm, respectively.     

Enhancement of GaAs/InGaAs quantum well emission by disordered gold nanoparticle arrays

Coupling effect of surface plasmon (SP) with InGaAs/GaAs QW emission is demonstrated experimentally. The SP resonance is generated by disordered arrays of Au nanodisks on the InGaAs/GaAs QW surface. More than twofold enhancement in QW PL is observed. Theoretical simulations also indicated that the disordered arrays of Au structures enlarged the cone angle for which light can be radiated out. The larger angle enhances the PL intensity.     

Radiative quantum efficiency of CdSe/ZnS quantum dots suspended in different solvents

The radiative quantum efficiencies η of the CdSe/ZnS core-shell nanoparticles embedded into polymethyl methacrylate (PMMA) and suspended in three different solvents: chloroform (CHCl₃), toluene (C₆H₅CH₃) and tetrahydrofuran (C₄H₈O) were measured using thermal lens (TL) technique. The mode-mismatched pump-probe TL measurements were accomplished in function of the CdSe/ZnS quantum-dot concentration (12-60 mg/ml) at λ_e = 594 nm (pump) and λ_p = 632.8 nm (probe). The values obtained for η were higher for CdSe/ZnS nanoparticles suspended in tetrahydrofuran and chloroform, as compared to the values for toluene. Thermal diffusivity (D) and the absolute nonradiative quantum efficiency (φ) were determined.     

Growth and optical characterization of single quantum well structure of submonolayer ZnS/ZnTe

Single quantum wells of submonolayer ZnS/ZnTe were grown between ZnTe layers using hot wall epitaxy method with fast-movable substrate configuration. As ZnS well widths decrease from 1 to 0.15 monolayer, the photoluminescence peaks shift to higher energies from 2.049 to 2.306 eV, and the photoluminescence intensities increase. As ZnS well width decrease, the PL spectra show the lower-energy tails and consequently the increased PL FWHMs. This is a result of a convolution of two PL peaks from two-dimensional and zero-dimensional quantum islands, supported by a still lived lower-energy peaks of zero-dimensional quantum islands above 50 K. The energy shift in the power dependence of photoluminescence spectra is proportional to the third root of the excitation density. These behaviors can be described by the formation of submonolayer type-II ZnS/ZnTe quantum well structure, and the coexistence of two-dimensional and one-dimensional islands in ZnS layers.     

Intraband photoresponse of SiGe quantum dot/quantum well multilayers

In this contribution we study the intravalence band photoexcitation of holes from self-assembled Ge quantum dots (QDs) in Si followed by spatial carrier transfer into SiGe quantum well (QW) channels located close to the Ge dot layers. The structures show maximum response in the important wavelength range 3–5 μm. The influence of the SiGe hole channel on photo- and dark current is studied depending on temperature and the spatial separation of QWs and dot layers. Introduction of the SiGe channel in the active region of the structure increases the photoresponsivity by up to about two orders of magnitude to values of 90 mA/W at T=20 K. The highest response values are obtained for structures with small layer separation (10 nm) that enable efficient transfer of photoexcited holes from QD to QW layers. The results indicate that Si/Ge QD structures with lateral photodetection promise very sensitive large area mid-infrared photodetectors with integrated readout microelectronics in Si technology.     

非对称耦合量子阱的吸收非线性增强

基于V 形三能级模型运用密度矩阵方程推导了非对称耦合量子阱三阶光学非线性极化率. 具体分析了三阶吸收非线性效率（三阶光学非线性极化率与线性吸收系数之比）随阱间电子相干振荡频率的变化规律. 理论结果表明：三阶吸收非线性效率对阱间电子相干振荡频率相当敏感，当阱间电子相干振荡频率增大时三阶吸收非线性效率显著增强，而当阱间电子相干振荡频率为零时，这种非线性效率类似于单量子阱情况. 与单量子阱相比，对于已设计好的非对称耦合量子阱结构其突出特征表现在，其非线性吸收与色散特性可经由沿材料生长方向偏压进行控制. 据此，我们预期利用这种非对称耦合量子阱结构能设计成光通信中的光限幅器和可控克尔光开关.