可降解聚乳酸/羟基磷灰石杂化材料Ⅰ.纳米羟基磷灰石的合成

可降解聚乳酸/羟基磷灰石杂化材料Ⅰ.纳米羟基磷灰石的合成;化学共沉淀;共沸蒸馏;纳米羟基磷灰石;表面处理剂     

DNA/羟基磷灰石杂化膜修饰电极用于研究DNA与量子点的相互作用

首次利用溶胶-凝胶一步法制备了纳米多孔羟基磷灰石(HAp)-DNA杂化膜修饰玻碳电极,HAp优良的生物相容性和独特的吸附性可以将DNA固定在HAp多孔薄膜上,而DNA的大分子结构对HAp膜起到稳定剂的作用.采用循环伏安法和交流阻抗法系统地研究了电极表面固定DNA的稳定性以及固定的DNA与非电活性核壳型量子点CdTe/C...     

等离子喷涂羟基磷灰石涂层的晶化及其结构特征

Phase compositions, function group and surface morphology of recrystallized plasma sprayed hydroxyapatite (HA) coatings were examined by means of X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), Raman spectra, scanning electron microscope (SEM) and electron probe microanalyzer (EPMA). The results show that the structural integrity of HA was almost completely restored after the heat treatment of (600～700℃)×2h. Temperatures above this value were unfavorable to the restoration of OH^- and crystallinity. The recrystallizing treatment caused amorphous and decomposed phases transform into crystalline HA with a very small amount of CaO retained in coating. Under 500℃, longer keeping time led to a gradual increase of crystallinity, however, under 600℃, the crystallinity showed no obvious changes with decreased CaO content. Meanwhile, nanometer hydrox-yapatite crystals with dot-like, polyhedral, acerous and effloresent shapes and a average size of 100nm originated in the coatings.     

羟基磷灰石固载路易斯酸催化三糖转化为乳酸酯

采用浸渍法制备了羟基磷灰石(HAP)负载的路易斯酸SnCl2和SnCl4催化剂.它们在三糖在醇溶液中转化为乳酸酯反应中表现出一定的催化活性.在最佳的反应条件下,SnCl2/HAP催化1,3-二羟丙酮在正丁醇溶液中转化为乳酸正丁酯,收率高达73.5%.     

聚氨酯-丙烯酸酯杂化乳液结构与性能的影响

以聚四氢呋喃醚二醇（PTMG）、异氟尔酮二异氰酸酯（IPDI）、亲水单体二羟甲基丙酸（DMPA）,乙二胺为主要原料,制备了稳定的水性聚氨酯乳液.然后以苯乙烯（St）、丙烯酸丁酯（BA）为单体,过硫酸钾为引发剂,在不外加乳化剂的条件下,运用物理共混、化学复合和化学共聚三种方法对该水性聚氨酯乳液进行改性研究.用FTIR技术对聚氨酯-丙烯酸酯杂化乳液的结构进行了对比与表征;通过粘度测定、粒度分析、力学性能和耐水性能测试、DSC分析,研究了不同改性方法对乳液及其胶膜性能的影响.结果表明,化学共聚的改性方法对原水性聚氨酯的耐水性的改良效果最好,能够得到稳定且综合性能较优的聚氨酯-丙烯酸酯杂化乳液.     

碳纳米管对羟基磷灰石基复合材料力学性能的影响

将力学性能优良的碳纳米管(CNTs)与羟基磷灰石(HA)生物陶瓷相复合,发展CNTs/HA复合材料来应用于骨组织修复领域,有望解决HA生物陶瓷力学性能的不足。通过3种不同的制备方法,即通过表面活性剂将CNTs分散在HA基体中、通过酸碱中和反应将CNTs与HA共沉淀以及通过体外浸泡在CNTs上矿化生长HA等方法来获得CNTs/HA复合材料。深入研究CNTs的表面结构和分散状态对CNTs/HA复合材料力学性能的影响。结果表明,CNTs的添加改变了HA的脆性,导致复合材料抗压力学性能得到提高。但是,由于复合材料制备方法的不同,导致CNTs在HA基体中的分散状态、表面结构的完整性以及与HA的界面结合情况不同,导致其抗压力学性能不同。其中,通过表面活性剂将CNTs分散在HA基体中而获得复合材料的抗压力学性能表现最好,而CNTs与HA通过共沉淀法所获得复合材料的抗压力学性能表现最差。     

碳纳米管对羟基磷灰石基复合材料力学性能的影响

将力学性能优良的碳纳米管(CNTs)与羟基磷灰石(HA)生物陶瓷相复合,发展CNTs/HA复合材料来应用于骨组织修复领域,有望解决HA生物陶瓷力学性能的不足.通过3种不同的制备方法,即通过表面活性剂将CNTs分散在HA基体中、通过酸碱中和反应将CNTs与HA共沉淀以及通过体外浸泡在CNTs上矿化生长HA等方法来获得CNTs/HA复合材料.深入研究CNTs的表面结构和分散状态对CNTs/HA复合材料力学性能的影响.结果表明,CNTs的添加改变了HA的脆性,导致复合材料抗压力学性能得到提高.但是,由于复合材料制备方法的不同,导致CNTs在HA基体中的分散状态、表面结构的完整性以及与HA的界面结合情况不同,导致其抗压力学性能不同.其中,通过表面活性剂将CNTs分散在HA基体中而获得复合材料的抗压力学性能表现最好,而CNTs与HA通过共沉淀法所获得复合材料的抗压力学性能表现最差.     

杂多酸/离子液体杂化材料催化苯的高选择性羟基化

制备了V取代的磷钼酸H_3+xPMo_12-xV_xO₄₀（x=0,1,2）及1-丁基-3-甲基咪唑溴盐离子液体（[C₄mim]Br）,并采用离子交换的方法制备了系列杂化材料（[C₄mim]3+xPMo_12-xV_xO₄₀,x=0,1,2）;采用X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、紫外-可见漫反射光谱（UV-Vis DRS）对所制备样品进行了表征;以H₂O₂为氧化剂,考察了所得样品催化苯羟基化制苯酚的活性。结果表明,和相应的离子液体及杂多酸相比,杂化材料的催化活性得到了很大的提高,尤其是催化剂[C₄mim]₅PMo₁₀V₂O₄₀,在优化后的条件下,苯的转化率可达到21%,苯酚的选择性在99%以上。而且,该催化剂具有很好的可重复使用性,连续使用五次后,苯的转化率和苯酚的选择性没有明显降低。     

聚乙二醇/羟基磷灰石纳米杂化材料的制备及表征

以聚乙二醇单甲醚(MPEG)为原料, 采用先磷酰化再水解的方法合成了聚乙二醇单甲醚磷酸酯(P-MPEG). 以P-MPEG为空间位阻剂, 采用共沉淀法合成了内核为纳米羟基磷灰石(nHA)、 壳层为MPEG链的纳米杂化材料. 用傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)、 透射电子显微镜(TEM)和激光粒度分析(LPSA)对材料结构进行了表征. 结果表明, 所合成的杂化材料不仅能在水中再分散, 而且可以在甲醇和二甲基甲酰胺(DMF)等有机溶剂中再分散.     

羟基磷灰石中氢键的XPS考察

Several calcium orthophosphates (tricalcium phosphate, monocalcium dihydropho-sphate, dicalcium hydrophosphate, and hydroxyapatite) are characterized by XPS and IR method. The P2p electron binding energies follow the order Ca(H_2PO_4)_2>CaHPO_4>Ca_(10)(OH)_2(PO_4)_6>Ca_3(PO_4)_2. It is expounded that there is hydrogen bonding of (OH...OPO_3) between the OH~- ion and the neighbour oxygen of the phosphate in hydroxyapatite.     

Interaction and Microstructure of Polyurethane/Silica Hybrid Films Prepared by Sol-Gel Process

The polyester/silica hybrid resins and their hybrid polyurethanes were prepared via in situ (IS) or blending (BL) method using different silica sols. The effects of preparation methods, silica type and content on the interaction and microstructure of polymer/silica hybrid materials were investigated by FTIR, viscosity measurement, TGA, DMA and SAXS, respectively. It was found that both IS and BL methods formed agglomerates of silica-rich phases and primary silica-rich phases in the hybrid films, but the former caused stronger interaction between silica and polymer than the latter, resulting in much bigger agglomerates and compacter structure. The ethoxy group at silica was favorable for enhancing the interaction between silica phase and polymer, even between silica phases as well. The interaction between silica phase and polymer caused increasing viscosity, modulus and Tg, while the interaction between silica phases themselves increased the extent of micro-phase separation, especially for the hybrid films prepared by IS method.     

Identification of Novel Covalent XPO1 Inhibitors Based on a Hybrid Virtual Screening Strategy

Nuclear export protein 1 (XPO1), a member of the nuclear export protein-p (Karyopherin-P) superfamily, regulates the transport of “cargo” proteins. To facilitate this important process, which is essential for cellular homeostasis, XPO1 must first recognize and bind the cargo proteins. To inhibit this process, small molecule inhibitors have been designed that inhibit XPO1 activity through covalent binding. However, the scaffolds for these inhibitors are very limited. While virtual screening may be used to expand the diversity of the XPO1 inhibitor skeleton, enormous computational resources would be required to accomplish this using traditional screening methods. In the present study, we report the development of a hybrid virtual screening workflow and its application in XPO1 covalent inhibitor screening. After screening, several promising XPO1 covalent molecules were obtained. Of these, compound 8 performed well in both tumor cell proliferation assays and a nuclear export inhibition assay. In addition, molecular dynamics simulations were performed to provide information on the mode of interaction of compound 8 with XPO1. This research has identified a promising new scaffold for XPO1 inhibitors, and it demonstrates an effective and resource-saving workflow for identifying new covalent inhibitors.     

聚氨酯/苯丙杂化乳液的合成、表征和特性及其在复膜胶中的应用

由聚氨酯(PU)预聚物、丙烯酸丁酯和苯乙烯单体的乳液聚合制备了聚氨酯-苯乙烯-丙烯酸酯(PUSA)杂化乳液,1H NMR显示所得的PU预聚物由烯烃基团封端。 TEM表明,其粒径约为150 nm,且为颜色深浅不同的两部分所组成。 随着PU含量的降低,杂化乳液的热稳定性增加。 DSC分析表明,所得杂化乳液有单一的Tg值,且处于聚氨酯和聚苯丙(PSA)乳液Tg值的中间。 当将得到的杂化乳液用于纸塑和塑塑复合时,其剥离强度分别为14.1 N/2.5 cm和12.2 N/2.5 cm。     

基于CuAAC反应链间自交联有机-无机杂化水性聚氨酯的合成及性能

利用4,4’-二羟甲基-1,4-庚二炔功能单体作为扩链剂合成了一系列炔基接枝量不同的水性聚氨酯（WPU）,然后基于铜催化的叠氮-炔基环加成（CuAAC）反应,采用3-叠氮基丙基三乙氧基硅烷（APTES-N₃）改性炔基功能化WPU,制备了室温链间自交联有机-无机杂化WPU. 采用红外光谱（FTIR）和核磁氢谱（¹H NMR）表征了自交联有机-无机杂化WPU. 探讨了APTES-N₃接枝量对WPU膜性能和WPU乳液形态的影响. 结果表明,随着APTES-N₃含量增加,WPU膜的结晶性逐渐下降;耐水性、耐溶剂性和热稳定性逐渐增强;WPU乳液粒子黏连程度增加. 当APTES-N₃质量分数从0增大到12%时,WPU膜的拉伸强度从14.3 MPa增加到28.6 MPa.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

Microstructure and Properties of Triethoxysilylpropylamine-Capped Polyurethane/Titania Hybrid Films

Triethoxysilylpropylamine-capped waterborne polyurethane/titania hybrid films were prepared by in situ method via sol-gel process of titanium n-butoxide under acidic condition. In the paper, we studied the effect of the contents of titania sol on the microstructure, mechanical property, water resistance, and optical property of the hybrid films. It was found, with introducing the content of titania, some physical properties such as tensile strength, modulus, water resistance, refractive index, heat resistance, and ultraviolet absorbance will increase. SEM and SAXS study suggested that the hybrid films had good planarization.     

Metal@COFs: Covalent Organic Frameworks as Templates for Pd Nanoparticles and Hydrogen Storage Properties of Pd@COF‐102 Hybrid Material

Three‐dimensional covalent organic frameworks (COFs) have been demonstrated as a new class of templates for nanoparticles. Photodecomposition of the [Pd(η³‐C₃H₅)(η⁵‐C₅H₅)]@COF‐102 inclusion compound (synthesized by a gas‐phase infiltration method) led to the formation of the Pd@COF‐102 hybrid material. Advanced electron microscopy techniques (including high‐angle annular dark‐field scanning transmission electron microscopy and electron tomography) along with other conventional characterization techniques unambiguously showed that highly monodisperse Pd nanoparticles ((2.4±0.5) nm) were evenly distributed inside the COF‐102 framework. The Pd@COF‐102 hybrid material is a rare example of a metal‐nanoparticle‐loaded porous crystalline material with a very narrow size distribution without any larger agglomerates even at high loadings (30 wt %). Two samples with moderate Pd content (3.5 and 9.5 wt %) were used to study the hydrogen storage properties of the metal‐decorated COF surface. The uptakes at room temperature from these samples were higher than those of similar systems such as Pd@metal–organic frameworks (MOFs). The studies show that the H₂ capacities were enhanced by a factor of 2–3 through Pd impregnation on COF‐102 at room temperature and 20 bar. This remarkable enhancement is not just due to Pd hydride formation and can be mainly ascribed to hydrogenation of residual organic compounds, such as bicyclopentadiene. The significantly higher reversible hydrogen storage capacity that comes from decomposed products of the employed organometallic Pd precursor suggests that this discovery may be relevant to the discussion of the spillover phenomenon in metal/MOFs and related systems.     

Two Dehydroabietic Acid-based Arylamines: Synthesis, Crystal Structure and Fluorescent Properties

Two dehydroabietic acid-based arylamines have been synthesized and characterized by FTIR, 1H NMR, 13C NMR, MS spectra and elemental analysis. Their spatial structures were determined by X-ray diffraction analysis. UV-Vis absorption and fluorescence spectral characteristics of these compounds in methanol were investigated. Their fluorescence emission spectra in different polarity solvents were further evaluated. Fluorescent properties and structural relationship of the compounds showed that fluorescence intensity and quantum yield inversely increase with the non-coplanar degree. In addition, the solvent polarity has different effects on the fluorescence emission spectra of two compounds.     

Covalent modification of temperature-sensitive breathable polyurethane with carbon nanotubes

Intelligent breathable polyurethane (PU) that is easily allowable for vapor transmission at critical temperature would have significant implication for numerous applications; however, fabrication of such materials has proven to be tremendously challenging. Herein, we reported novel breathable polyurethane material covalently modified with carbon nanotubes (CNTs). When an optimal amount of CNTs (0.5 wt%) was added, the resultant PU film presented high waterproofness with hydrostatic pressure up to 10.9 kPa, as well as enhanced mechanical properties with a tensile strength of 22.2 kPa and elongation at break of 990%. This smart PU film has a significant increase in water vapor transmission rate between 18°C (1400 g/(m²·d)) and 38°C (3440 g/(m²·d)). The type of intelligent polyurethane material is a promising candidate for applications in areas such as protective clothing, separator media, and wearable electronics.     

Covalent Capture: Merging Covalent and Noncovalent Synthesis

Coming together : The act of bringing the right molecules together is enough to induce irreversible or reversible formation of a covalent bond. The covalent capture strategy, in which a supramolecular interaction leads to the formation of a covalent bond (see scheme), can be utilized in very different biological and synthetic systems and can be used for numerous applications.