Sensitive Superoxide Biosensor Based on Silicon Carbide Nanoparticles

Direct electron transfer of immobilized superoxide dismutase (Cu, Zn‐SOD) onto silicon carbide (SiC) nanoparticles displays a pair of well defined and nearly reversible redox peaks with formal potential (E°′) of −0.03 V in pH 7.4. The heterogeneous electron transfer rate constant (k_s) and surface coverage (Γ) of immobilized SOD are 11.0±0.4 s⁻¹ and 1.42×10⁻¹¹ mol cm⁻². Biosensor shows fast amperometric response (3s) with sensitivity and detection limit of 1.416 nA μM⁻¹, 1.66 μM, and 1.375 nA μM⁻¹, 2.1 μM for cathodically or anodically detection of superoxide, respectively. This biosensor also exhibits good stability, reproducibility and long life‐time.     

An informative subtlety of itemperature-jump or coulostatic responses for surface-attached species

Theoretical relationships are developed to describe the open-circuit responses associated with the indirect laser-induced temperature-jump (ILIT) method, a method for measuring fast electron-transfer rate constants of surface-attached redox species. The analysis is also applicable to data obtained using the coulostatic charge-injection method. The unique relationship between k_m, the relaxation rate constant for the ILIT (or coulostatic) response, and E_i, the potential at which the system is initially poised, exhibits a surprising sensitivity to the values of k₀, E_i^0′ (the standard rate constant and formal potential for the redox couple), α (the transfer coefficient in the Butler–Volmer equation) and γ (a dimensionless parameter which is directly proportional to the total surface concentration of the redox moiety). ILIT data for several examples of surface-attached ferrocene moieties confirm the theoretically predicted k_m vs E_i behavior. Values of E_i^0′ and γ extracted from the ILIT data agree well with the values obtained from cyclic voltammetric data thereby confirming that the ILIT and cyclic voltammogram (CV) experiments are sampling the same ferrocene population.     

Attachment of Nanoparticles to Pyrolytic Graphite Electrode and Its Application for the Direct Electrochemistry and Electrocatalytic Behavior of Catalase

Abstract

A highly hydrophilic, nontoxic, and conductive effect of colloidal gold nanoparticles (GNP) and multi-walled carbon nanotubes (MWCNT) on pyrolytic graphite electrode has been demonstrated. The direct electron transfer of catalase (CAT) was achieved based on the immobilization of MWCNT/CAT-GNP on a pyrolytic graphite electrode by a Nafion film. The immobilized catalase displayed a pair of well-defined and nearly reversible redox peaks in 0.1 M phosphate buffer solution (PBS) (pH 6.98). The dependence of E°′on solution pH indicated that the direct electron transfer reaction of catalase was a single-electron-transfer coupled with single-proton-transfer reaction process. The immobilized catalase maintained its biological activity, showing a surface controlled electrode process with an apparent heterogeneous electron transfer rate constant (k _s) of 1.387±0.1 s^?1 and charge-transfer coefficient (α) of 0.49, and displayed electrocatalytic activity in the electrocatalytic reduction of hydrogen peroxide. Therefore, the resulting modified electrode can be used as a biosensor for detecting hydrogen peroxide.     

Dediazoniations of Arenediazonium Ions. Part XXI. Dediazoniation of Arenediazonium Ions Complexed with Crown Ethers

The evaluation of the dediazoniation kinetics of various m- and p-substituted benzenediazonium tetrafluoroborates in 1,2-dichloroethane at 50° in the presence of 18-crown-6, 21-crown-7 and dicyclohexano-24-crown-8 demonstrates that the rate constant for the dediazoniation within the complex (k₂) is smallest, and the equilibrium constant for complex formation (K) is largest for the complexes with 21-crown-7 (cf. Scheme 1). The logarithms of the equilibrium constants (K) for complex formation with each of the crown ethers studied correlate well with Hammett's substituent constants, σ, to give reaction constants ρ = 1.18–1.38. A linear correlation between the logarithms of the rate constants for the dediazoniation within the complex with those of the dediazoniation rate constants of uncomplexed diazonium ions (log k₂ vs. log.k₁), found for most substituted diazonium salts, indicates that the dediazoniation mechanism of the complexed diazonium ions is not significantly different from that of the free ions. For very electrophilic diazonium ions (p-Cl, m-CN), k₂ was much larger than expected on the basis of the linear log k₂ vs. log k₁ relationship. Analysis of the dediazoniation products showed that this was due to a change in mechanism from heterolytic to homolytic dediazoniation. The complexation rate of diazonium salts by crown ethers (k_c) is practically diffusion controlled and does not change much with the size of the crown ether. The decomplexation rate (k_d), however, is significantly lower for complexes with 21-crown-7, than for those with 18-crown-6 and dicyclohexano-24-crown-8, and is therefore the reason for the variations in the equilibrium constant (K) and thus for the fact that complexes of arenediazonium salts with 21-crown-7 are the most stable. The amounts of the N_α-N_β rearrangement, as well as those of the exchange of the ¹⁵N-labelled diazonio group with external nitrogen during dediazoniation of p-toluenediazonium salt were independent of the addition of crown ethers. A dediazoniation mechanism involving a charge transfer, as well as an insertion-type diazonium ion-crown ether complex is proposed. In this mechanism, dediazoniation of the insertion complex does not take place directly, but through the charge-transfer complex.     

Biphasic oxidation of diaquadichloro(1,10-phenanthroline)chromium(III) by N-bromosuccinimide and the formation of chromium(IV) and chromium(V)

The kinetics of oxidation of diaquadichloro(1,10-phenanthroline)chromium(III) complex, [Cr^III(phen)(H₂O)₂Cl₂]⁺, by N-bromosuccinimide (NBS) is biphasic. The first faster step involves the oxidation of Cr(III) to Cr(IV). The second slower step is due to the oxidation of Cr(IV) to Cr(V). The reaction product is isolated and characterized by electron spin resonance (ESR), IR, and elemental analysis. The chromium(V) product is consistent with the formula [Cr^V(phen)Cl₂(O)]Br. The rate constants k_f and k_s, for the faster and the slower steps respectively, were obtained using an Origin 9.0 software program. Values of both k_f and k_s, varied linearly with [NBS] at constant reaction conditions. The effect of pH on the reaction rate is investigated over the pH (4.11–6.01) range at 25.0°C. The rate constants k_f and k_s increased with increasing pH. This is consistent with hydroxo forms of the chromium species being more reactive than the aqua forms. Chromium(III) complexes, more often than not, are inert. The oxidation of the Cr(III) complex to Cr(IV), most likely, proceeds by an outer sphere mechanism. Since chromium(IV) is labile the mechanism of its oxidation to chromium(V) is not certain.     

Spectrophotometric studies of the formation of charge transfer complex of iron(III) with N,N′-bis(2-pyridylmethylidene)-1,2-diiminoethane di-Schiff base ligand in methanol

The complex formation reaction between N,N′-bis(2-pyridylmethylidene)-1,2-diiminoethane (BPIE) di-Schiff base ligand as an electron donor and iron(III) chloride as an electron acceptor have been studied spectrophometrically in methanol at 28°C. The values of equilibrium constants, K and molar absorptivities, ε were obtained from the Benesi–Hildebrand, Scott and Foster–Hammick–Wardley equations. The results indicate the formation of 1?:?1 charge transfer complex. The absorption band energy of the complex, E _CT, the ionization potential of the BPIE Schiff base ligand, I ^D, and the Gibbs energy changes of the above reaction, ΔG ⁰, were calculated. Finally, the kinetics of the complex formation reaction were studied and was found to be second-order in each reactant. The values of the rate constants of the forward and reverse reactions k ₁ and k _?1 were determined.     

Kinetics of the polycondensation and copolycondensation of bis(3‐hydroxypropyl) terephthalate and bis(4‐hydroxybutyl) terephthalate

The kinetics of the polycondensation and copolycondensation reactions of bis(3‐hydroxypropyl) terephthalate (BHPT) and bis(4‐hydroxybutyl) terephthalate (BHBT) as monomers were investigated at 270 °C in the presence of titanium tetrabutoxide as a catalyst. BHPT was prepared by the ester interchange reaction of dimethyl terephthalate and 1,3‐propanediol (1,3‐PD). Through the same method adopted for BHPT synthesis, BHBT was prepared with 1,4‐butanediol instead of 1,3‐PD. With second‐order kinetics applied for polycondensation, the rate constants of the polycondensation of BHPT and BHBT, k₁₁ and k₂₂, were calculated to be 4.08 and 4.18 min^?1, respectively. The rate constants of the cross reactions in the copolycondensation of BHPT and BHBT, k₁₂ and k₂₁, were calculated with results obtained from proton nuclear magnetic resonance spectroscopy analysis. The rate constants during the copolycondensation of BHPT and BHBT at 270 °C decreased in the order k₁₂ > k₂₂ > k₁₁ > k₂₁, indicating that the reactivity of BHBT was larger than that of BHPT at 270 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2435–2441, 2002     

Photosensitized Generation of Singlet Oxygen from (Substituted Bipyridine)ruthenium(II) Complexes

Photophysical properties in dilute MeCN solution are reported for seven Ru^II complexes containing two 2,2′‐bipyridine (bpy) ligands and different third ligands, six of which contain a variety of 4,4′‐carboxamide‐disubstituted 2,2′‐bipyridines, for one complex containing no 2,2′‐bipyridine, but 2 of these different ligands, for three multinuclear Ru^II complexes containing 2 or 4 [Ru(bpy)₂] moieties and also coordinated via 4,4′‐carboxamide‐disubstituted 2,2′‐bipyridine ligands, and for the complex [(Ru(bpy)₂(L)]²⁺ where L is N,N′‐([2,2′‐bipyridine]‐4,4′‐diyl)bis[3‐methoxypropanamide]. Absorption maxima are red‐shifted with respect to [Ru(bpy)₃]²⁺, as are phosphorescence maxima which vary from 622 to 656 nm. The lifetimes of the lowest excited triplet metal‐to‐ligand charge transfer states ³MLCT in de‐aerated MeCN are equal to or longer than for [Ru(bpy)₃]²⁺ and vary considerably, i.e., from 0.86 to 1.71 μs. Rate constants k_q for quenching by O₂ of the ³MLCT states were measured and found to be well below diffusion‐controlled, ranging from 1.2 to 2.0⋅10⁹ dm³ mol⁻¹ s⁻¹. The efficiencies f of singlet‐oxygen formation during oxygen quenching of these ³MLCT states are relatively high, namely 0.53 – 0.89. The product of k_q and f gives the net rate constant k for quenching due to energy transfer to produce singlet oxygen, and k_q−k equals k, the net rate constant for quenching due to energy dissipation of the excited ³MLCT states without energy transfer. The quenching rate constants were both found to correlate with ΔG^CT, the free‐energy change for charge transfer from the excited Ru complex to oxygen, and the relative and absolute values of these rate constants are discussed.     

In Situ FT-IR Studies of the Zirconium (IV) Acetylacetonate Catalyzed Urethane Reaction of Butanediols

A comparative kinetic study of the urethane reactions of phenyl isocyanate and 1,2-, 1,3-, and 1,4-butanediol was carried out in dichloromethane solution with zirconium (IV) acetylacetonate as catalyst. In situ FT-IR was used to follow the kinetics of the reactions at a constant temperature of 15°–30°C. The rate constants for the reaction of the primary hydroxyl group and the secondary hydroxyl group were calculated as k _prim and k _sec, respectively. Analysis of the second-order rate constants of these systems indicated that k _prim follows 1,2-butanediol >1,3-butanediol >1,4-butanediol. The ratio of k _prim/k _sec in 1,2-butanediol was the highest and the order followed was the same as with the reaction rate. Activation energies and Eyring parameters were also determined for the urethane reaction of butanediols.     

LASER FLASH-INDUCED PHOTOREDUCTION OF PHOTOSYNTHETIC FERREDOXINS AND FLAVODOXIN BY 5-DEAZARIBOFLAVIN AND BY A

Abstract Laser flash photolysis has been used to compare the kinetics of reduction of ferredoxin isoforms from the green alga Monoraphidium braunii, and the ferredoxin and flavodoxin from the cyanobacterium Anabaena PCC 7119, by 5-deazariboflavin semiquinone (dRM) and the viologen analogue 1,l‘-propylene-2,2′-bipyridyI (PDQ ⁺). Similar ionic strength-independent second-order rate constants (1.4 × 10⁸M^?1 s ^?1) were obtained for the reduction of both algal ferredoxin isoforms by dRM For the reduction of oxidized flavodoxin by dRM, a more complex behavior was observed, with a second-order rate constant for dRM. decay of 1.8 × 10⁸M^?1 S^?1, and a first-order (i.e. protein concentration independent) rate constant of 450 s^?1, that probably corresponds to the protonation of the FMN semiquinone cofactor, which occurs subsequent to electron transfer. A value of 5 × 10⁷M^?1 S^?1 was obtained for the second-order rate constant of flavodoxin semiquinone reduction by dRM The reduction of ferredoxins and flavodoxin semiquinone by PDQ ⁺ showed nonlinear protein concentration dependencies, consistent with a minimal two-step mechanism involving complex formation followed by intracomplex electron transfer. A negative ionic strength effect on the kinetic constants was obtained, indicating the existence of attractive electrostatic interactions during electron transfer. With all the ferredoxins the k_∞ values (rate constants extrapolated to infinite ionic strength) for the second-order step of the reduction process (complex formation) are smaller than previously reported for spinach ferredoxin, although Anabaena ferredoxin is somewhat more reactive than are the algal ferredoxins with the viologen. In contrast, the k_∞ values for the first-order component of ferredoxin reduction (intracomplex electron transfer) for the algal ferredoxins are comparable to that for spinach ferredoxin, whereas for this reaction the ferredoxin from Anabaena has a smaller intrinsic reactivity. As compared with the ferredoxins, Anabaena flavodoxin has significantly smaller k_∞ values for its interaction with the viologen analogue, both for complex formation and for electron transfer. In all cases the existence of nonproductive electrostatic interactions between the viologen analogue and the proteins is suggested by the data.     

A study of the electrochemical behavior of an oxadiazole derivative electrodeposited on multi-wall carbon nanotube-modified electrode and its application as a hydrazine sensor

In this study, an oxadiazole multi-wall carbon nanotube-modified glassy carbon electrode (OMWCNT−GCE) was used as a highly sensitive electrochemical sensor for hydrazine determination. The surface charge transfer rate constant, k _s, and the charge transfer coefficient, α, for electron transfer between GCE and electrodeposited oxadiazole were calculated as 19.4 ± 0.5 s⁻¹ and 0.51, respectively at pH = 7.0. The obtained results indicate that hydrazine peak potential at OMWCNT−GCE shifted for 14, 109, and 136 mV to negative values as compared with oxadiazole-modified GCE, MWCNT−GCE, and activated GCE surface, respectively. The electron transfer coefficient, α, and the heterogeneous rate constant, k′, for the oxidation of hydrazine at OMWCNT−GCE were also determined by cyclic voltammetry measurements. Two linear dynamic ranges of 0.6 to 10.0 μM and 10.0 to 400.0 μM and detection limit of 0.17 μM for hydrazine determination were evaluated using differential pulse voltammetry. In addition, OMWCNT−GCE was shown to be successfully applied to determine hydrazine in various water samples.

     

Extent of complex participation in the rate of copolymerization of styrene with maleic anhydride in methyl ethyl ketone

Georgiev and Shirota's simplified terminal complex model was applied to the dilatometrically measured initial rate of copolymerization of sytrene (ST) with maleic anhydride (MA) in methyl ethyl ketone (MEK) at 50°C. The rate was maximum at the feed MA mole fractions of 0.752, 0.769, and 0.806 at the total monomer concentrations of 2M, 1.5M, and 0.5M, respectively. Shirota's method gave the following ratios of propagation rate constants: β_A=k_AC/k_AD = 8.25 and β_D = k_DC/k_DA = 2.70. Georgiev's method gave β_A = 14, β_D = 2.7, and α = k_AD/k_DA = 22. The equilibrium constant of the donor-acceptor complexation between ST and MA in MEK was measured to be 0.045 dm³/mol at room temperature.     

Studies in nickel(IV) chemistry. Kinetics of electron transfer from dimethyl sulfoxide to oxohydroxonickel(IV) in aqueous acid medium

The kinetics of decomposition of “oxohydroxonickel(IV)” [Ni(IV)] with concomitant intramolecular electron transfer to produce hexaaquanickel(II) and dioxygen in aqueous acid solutions show pseudo-first-order dissappearance of the Ni(IV). The pseudo-first-order rate constants for the acid decomposition (k_ad) satisfy where K_MH and k_d refer to the equilibrium protonation constant and the decomposition constant of the protonated species of the Ni(IV) respectively. The values of K_MH and k_d in aqueous medium at 45°C and μ = 2.0M are 25.5 ± 1M^?1 and (1.7 ± 0.1) × 10^?5 s^?1, respectively. The kinetics of the intermolecular electron transfer from dimethyl sulfoxide (DMSO) to the Ni(IV), producing Ni(H₂O)₆²⁺ and dimethyl sulfone as products, have been investigated by monitoring the formation of Ni(H₂O)₆²⁺. The pseudo-first-order rate constants for the electron transfer k_obs are linearly dependent on [DMSO]₀ or [H⁺], attaining limiting values at higher relative [DMSO]₀ or [H⁺], in accordance with where K_1c and K_2c represent the formation constants of the precursors involving DMSO and the unprotonated and one-protonated Ni(IV) species, respectively, and k_1x and k_2x are the corresponding decomposition rate constants of the precursors. The values of K_2c and k_2x are (2.3 ± 0.1) × 10⁴M^?1 and 19 ± 1 s^?1, respectively, at 45°C and μ = 1.0M. Results are interpreted in terms of probable mechanisms involving (1) a rate-determining decomposition of the protonated Ni(IV) followed by rapid product formation steps, and (2) precursor complex formation between DMSO and the unprotonated or the protonated species of the Ni(IV) followed by rate-determining decomposition with electron transfer.     

Experimental and calculation methods of studying the effect of second coordination sphere on standard rate constants of charge transfer for Cr(III)/Cr(II) redox couple in chloride melts

The cyclic voltammetry method was used to determine the standard rate constants of charge transfer (k _s) on a glassy carbon electrode for the Cr(III)/Cr(II) redox couple in the systems of NaCl-KCl-CrCl₃, KCl-CrCl₃, and CsCl-CrCl₃ in the temperature range of 973–1173 K. It was shown that k _s grows at an increase in the temperature and decreases as sodium cations are replaced by potassium and cesium cations in the second coordination sphere of chromium complexes. The calculations carried out using the PC GAMESS/Firefly quantum-chemical software by means of the DFT technique showed that the values of the charge transfer activation energy change monotonously in the series of Na-K-Cs in accordance with the ratio of reorganization energies. In its turn, this leads to monotonous variation of the charge transfer rate constants.     

Reaction of copper(I) chloride pyridine complexes with dioxygen. A kinetic study

Summary Copper(I) complexes [CuClL]₂ (L=Py, 4-PhPy, 4-MePy, 4-Me₂NPy, and 4-PhCOPy) react with dioxygen in dichloromethane according to the rate law: r=K_D ^1/2 k₂ [CuClL]₂ ^1/2[O₂] where KD is the dissociation constant of the equilibrium [CuClL]₂ 2 CuCIL and k₂ the second order rate constant of the reaction of the latter with dioxygen.The K_D values were determined by molecular weight measurements in dichloromethane and a correlation has been developed between the experimental rate constants obtained and the acid dissociation constants (pK_a) for the ligands. The reaction fits a Hammett linear free energy relationship and the rate-determining step is attributed to the first electron transfer to the dioxygen molecule from the mononuclear copper(I) complex, which is influenced by changes in the electron density on the copper.     

Kinetics of electrophilic brominations. Mechanistic significance of the third-order term

The rates of electrophilic bromination of various donors follow complex kinetics which include both first-order and second-order dependences on bromine, especially in the less polar solvents. The second-order rate constant k_s and the third-order rate constant k_t are evaluated for alkene bromination in carbon tetrachloride, and they are compared to those already listed for the electrophilic brominations of substituted styrenes, arenes, and metal carbonyls in the extant literature. Despite the varying magnitudes of the second– and third-order rate constants for these diverse donors (and in different solvents), the ratio log(k_s/k_t) is remarkably invariant. The mechanistic implication of this unique observation is discussed in the context of charge transfer interactions which are common to the activated complexes in the electrophilic brominations of various donors.     

Synthesis, characterization and theoretical analysis on a oxygen-sensing phosphorescent copper(I) complex

The fluorescence quenching of 9-aminoacridine by certain substituted uracils in water was studied using absorption, steady state and time resolved measurements. The bimolecular quenching rate constants (k_q), binding constant K and number of binding sites (n) were calculated based on the fluorescence quenching data. The free energy change (ΔG_et) for electron transfer process was calculated by Rehm–Weller equation. From lifetime measurement we observed that the quenching was mainly due to static mechanism involving ground state complex formation.     

Kinetics and mechanism of intramolecular general base-catalyzed alkanolysis of phenyl salicylate in the presence of anionic micelles

The alkanolysis of ionized phenyl salicylate, PS^?, has been studied in the presence and absence of micelles of sodium dodecyl sulphate, SDS, at 0.05 M NaOH, 30 or 32°C and within the alkanol, ROH, (ROH = HOCH₂CH₂OH and CH₃OH) contents of 15–74 or 92%, v/v. The alkanolysis of PS^? involves intramolecular general base catalysis. At a constant concentration of SDS, [SDS]_T, the observed pseudo first-order rate constants, k_obs, for the reactions of ROH with PS^? obtained at different concentration of ROH, [ROH]_T, obey the relationship: k_obs = k[ROH]_T/(1 + K_A[ROH]_T) where k is the apparent second-order rate constant and K_A is the association constant for dimerization of ROH molecules. Both k and K_A decrease with increase in [SDS]_T. At a constant [ROH]_T, the rate constants, k_obs, show a decrease of nearly 2-fold with increase in [SDS]_T from 0.0–0.3M. These results are explained in terms of pseudo-phase model of micelle. The rate constants for alkanolysis of PS^? in micellar pseudophase are insignificant compared with the corresponding rate constants in aqueous-alkanol pseudophase. This is attributed largely to considerably low value of [ROH] in the specific micellar environment where micellar bound PS^? molecules exist. The increase in [ROH]_T decrease the value of the binding constant of PS^? with SDS micelle. The effects of anionic micelles on the rates of alkanolysis of PS^? are explained in terms of the porous cluster micellar structure.     

Insights Into How Heme Reduction Potentials Modulate Enzymatic Activities of a Myoglobin-based Functional Oxidase

Heme-copper oxidase (HCO) is a class of respiratory enzymes that use a heme-copper center to catalyze O₂ reduction to H₂O. While heme reduction potential (E°′) of different HCO types has been found to vary >500 mV, its impact on HCO activity remains poorly understood. Here, we use a set of myoglobin-based functional HCO models to investigate the mechanism by which heme E°′ modulates oxidase activity. Rapid stopped-flow kinetic measurements show that increasing heme E°′ by ca. 210 mV results in increases in electron transfer (ET) rates by 30-fold, rate of O₂ binding by 12-fold, O₂ dissociation by 35-fold, while decreasing O₂ affinity by 3-fold. Theoretical calculations reveal that E°′ modulation has significant implications on electronic charge of both heme iron and O₂, resulting in increased O₂ dissociation and reduced O₂ affinity at high E°′ values. Overall, this work suggests that fine-tuning E°′ in HCOs and other heme enzymes can modulate their substrate affinity, ET rate and enzymatic activity.     

Standard rate constants of charge transfer for Nb(V)/Nb(IV) redox couple in chloride-fluoride melts: Experimental and calculation methods

Standard rate constants k _s of charge transfer for Nb(V)/Nb(IV) redox couple in NaCl-KCl (the equimolar mixture) -K₂NbF₇, KCl-K₂NbF₇, and CsCl-K₂NbF₇ melts are determined by using cyclic voltammetry. An unconventional series of the standard rate constants is found: k _s (KCl) < k _s (CsCl) < k _s (NaCl-KCl). Ab initio calculations carried out by using a PC Gamess/Firefly quantum-chemical program showed that the charge transfer activation energy can change not monotonically in the Na-K-Cs series, in compliance with the reorganization energy relationship. This leads, in its turn, to nonmonotonic change in the charge transfer rate constants.