Reactions of 2-aminooxazoles and 2-aminothiazoles with dienophiles. Isolation of stable diels-alder adducts

Room temperature reaction of 2-aminooxazole 1 and its 4- and 4,5-substituted derivatives, with dimethyl acetylenedicarboxylate gave good yields of Diels-Alder adducts 2 , isolated as stable crystalline compounds. A competing process produced oxazole[3,2-a]pyrimidines 3 , also in good yield. Minor products were also identified. 2-Amino-4-methylthiazole ( 6 ) reacted in a similar manner and gave the Diels-Alder adduct 7 and a thia-zolo[3,2-a]pyrimidine 8 as main products with a lesser amount of a thiazole [3,2-d][1:3]diazepine ( 9 ). The aminooxazoles reacted with olefinic dienophiles to give pyridine derivative, formed by breakdown of the original unstable adducts.     

Sequential ene, Diels-Alder reactions of AF4-yne with 1,3,5-cycloheptatriene

(4,5-Dehydro)-1,1,2,2,9,9,10,10-octafluoro [2.2]paracyclophane (AF4-yne) undergoes an ene reaction with 1,3,5-cycloheptatriene, the adduct of which subsequently undergoes a further Diels-Alder reaction with a second equivalent of AF4-yne to give two stereoisomeric 2:1 adducts. A very small amount of the classic 1:1 Diels-Alder adduct also can be isolated from the reaction. Structure assignments of all products were determined by NMR through a series of H1-H1, H1-C13 one bond, and H1-C13 two and three bond correlation experiments as well as H1-H1 NOE experiments.     

Differences in reactions of vinyl derivatives of pyrrole and thiophene with acetylenic esters

1-Methyl-2-vinylpyrrole and 2-vinylthiophene showed remarkable differences in reactivity and regioselectivity upon reaction with methyl propiolate, respectively forming dimethyl 1-methylindole-4,7-dicarboxylate and dimethyl benzo[b]thiophene-4,6-dicarboxylate. 1-Methyl-2-(1-propenyl)pyrrole reacted with dimethyl ace-tylenedicarboxylate to give Diels-Alder and Michael-type adducts. On the other hand, 2-(1-propenyl)thiophene gave a 1:2 adduct which results via an initial cycloaddition and subsequent ene reaction.     

Chemistry of sulfonyl isocyanates and sulfonyl isothiocyanates. X. Possible routes to substituted imidazolidinethiones and hexahydropyrimidinethiones

4-Toluenesulfonyl isocyanate (I) reacted with 2-aminoethanol and 3-amino-l-propanol to give 2:1 isocyanate/amino alcohol addition products. 1-Amino-2-propanol and I gave 1:1 and 2:1 adducts while 2-amino-2-methyl-l-propanol afforded only a 1:1 adduct. 4-Toluenesulfonyl isothio-cyanate (III) gave 1:1 adducts with 2-aminoethanol, l-amino-2-propanol and 3-amino-l-propanol, the first two of which were cyclized by concentrated sulfuric acid to 1-(4-toluenesulfonyl)-imidazoline-2-thiones and the third to 1-(4-toluenesulfonyl)hexahydropyrimidine-2-thione. A 1:2 adduct was obtained from III and 2-amino-2-methyl-l-propanol. Amino acids reacted with I and with 4-chlorobenzenesulfonyl isocyanate (II) to give N-(arylsulfonyl)-N¹-(carboxylic acid)-ureas. N-(4-Toluenesulfonyl)-N¹-(acetic acid)-urea (XVI) was converted to the methyl ester (XIX) by concentrated sulfuric acid and methanol and to water-soluble unrecoverable products by sulfuric acid alone. Glycine and III gave N-(4-toluenesulfonyl)-N¹-(acetic acid)-thiourea (XX) which was converted to the methyl ester (XXII) by concentrated sulfuric acid/methanol and to the cyclic 1-(4-toluenesulfonyl)imidazolin-5-one-2-thione (XXI) by sulfuric acid alone.     

Chiral thiophene dioxides and thiophene S,N-ylides as dienes for asymmetric diels-aldlr application

2-Menthyltrihalothiophene S,S-dioxides are efficient asymmetric dienes in Diels-Alder reactions with dienophiles to give regio- and stereoisomerically pure adducts. Thus styrene, allyl alcohol, methyl acrylate and acrylamide give solely one adduct while flat dienophiles such as indene and acenaphthylene give two diastereomers. Analogous 1- and 3- chirally substituted thiophenes are of little value in generating pure single adducts. Further transformations of the above adducts into useful enantiomerically pure compounds is briefly discussed.     

The first fulleropyrrolidine derivative of Sc3N@C80: pronounced chemical shift differences of the geminal protons on the pyrrolidine ring

The first pyrrolidine adduct on Sc(3)N@C(80) was synthesized and fully characterized. Addition of the N-ethylazomethine ylide occurs regioselectively on a [5,6] double bond on the surface of the icosahedral symmetry Sc(3)N@C(80), exactly in the same position as that described previously for a Diels-Alder adduct of the same compound.(11a,b) This addition pattern results in symmetric pyrrolidine carbons and unsymmetric geminal hydrogens on the pyrrolidine ring, as confirmed by (1)H and (13)C NMR spectroscopy, especially by HMQC. The shielding environment experienced by these geminal hydrogens differs by 1.26 ppm, indicative of pronounced ring current effects on the surface of this endohedral fullerene. This represents the first fully characterized pyrrolidine adduct on an endohedral metallofullerene.     

Diels-alder reactions of methyl- and π-acceptor-substituted 2-vinylindoles with dimethyl acetylenedicarboxylate and tetracyanoethylene: Novel functionalized carbazoles

The Diels-Alder reactions of the 2-vinylindoles 1a-1d , which are now readily accessible, with dimethyl acetylenedicarboxylate and tetracyanoethylene give rise to the novel 1,2-dihydro- and 1,2,3,4-tetrahydrocarbazoles 2, 4 , and 5 as well as the fully aromatized carbazoles 3 . With regard to the product spectrum, the mechanistic rationale comprises a Diels-Alder step, formal 1,3-hydrogen shift, ene reaction, and dehydrogenation. Conformational aspects of the 1,2-dihydrocarbazoles 2b and 2c are also discussed.     

CHLOROSULFONATION OF SOME CRISSCROSS CYCLOADDUCTS FROM ISOCYANATES AND DIARYL AZINES

Abstract

Reaction of chlorosulfonyl isocyanate (1) with arylaldehyde azines (7) gave the 2:1 crisscross adducts (8);attempts to prepare a disulphonamide of 8a gave only a mixture of the monosulfamide 9 and the diureide 10. The latter with trichloromethanesulfenyl chloride afforded the derivative 12a. and with chlorosulfonic acid hydrazinodicarbonamide (11). The azine 7a with benzoyl isocyanate (2) gave the expected crisscross adduct 13. With thiobenzoyl isocyanate (3) however, both 7a and 7d gave the 1: 1 adducts (14). whereas 7c gave a different 2: 1 adduct (15). Treatment of 14a with 1 gave the ureide 16. With both methyl isocyanate (4) and phenyl isocyanate (S), 7a gave the expected crisscross adducts (17a and b), and 7c with 5 similarly gave 17c. When 7a was treated with 1 followed by aqueous potassium iodide, the diureide (10) was formed; concentrated nitric acid converted 10 into the triazolenone (18). Treatment of 18 with chlorosulfonic acid-thionyl chloride gave the sulfonyl chloride (19) which was characterised as the sulfonamides (20 a-d).

Diarylsulfamoyl azines (21 a-f) with 1 and potassium iodide, gave the diureides 22 a-f. 4-Methoxy-3-sulfamoylbenzaldehydeazines (23 a-c) reacted with 3 to give the 1: I adducts 24 a-c, while 4-chlorosulfonylphenyl isocyanate (6) with benzaldehyde azine (7a) gave the bis-chlorosulfonyl adduct (25a). characterised as the diethylsulfonamide 25b. Attempted chlorosulfonation of the tetraphenyl cycloadduct 17b did not give the tetrasulfonyl chloride (although the reaction was successful with the more reactive rnethoxy adduct 17c); the tetrasulfonyl chloride (26a) was converted into 3 sulfonamides (26 b-d). The unsymmetrically-substituted diaryl azines (27) reacted with 1 and potassium iodide to yield the diureides 28 a-f. Analogous cycloadditions of 1 with several keto azines were unsuccessful. Selected compounds will be screened for medicinal and pesticidal activity; compounds 9,10 and 12a showed fungicidal activity against barley powdery mildew.     

Reaktionen der valenzpolaromeren Ketenform mesoionischer Heterocyclen mit 3-Dimethylamino-2H-azirinen

Reactions of valencepolaromeric ketenes of mesoionic heterocyles with 3-dimethylamino-2H-azirines Reactions of the 3-dimethylamino-2H-azirines 1a and 1b with the mesoionic oxazole 5 and the mesoionic dithiole 6 in acetonitrile at room temperature yield the 1:1 adducts 11 , 12 , 19 and 20 , respectively (Schemes 5 and 8). These products can be formulated as adducts of the aminoazirines and the ketenes 5a and 6a , which are valence polaromeric forms of the mesoionic heterocycles 5 and 6 (Scheme 2). The structure of the adducts has been elucidated by spectral data and their comparison with the data of (Z)- 11 , the structure of which has been established by X-ray [19]. Oxidation of the 1:1 adducts with KMnO₄ in a two-phase system yields 4-dimethylamino-3-oxazolin-2-ones (cf. Scheme 6) by clevage of the exocyclic C,C-double bond. A mechanism for the formation of the adducts is given in Scheme 9: Nucleophilic attack of 1 on the ketene leads to a primary adduct of type a , which undergoes clevage of the former N(1), C(2)-azirine bond to give adducts of type 11 or 19 . The N(1), C(2)-ring opening of 1a in the reaction with ketenes contrasts with the N(1), C(3)-opening of 1a in the addition with, for instance, isothiocyanates. These different ring openings are explained by the difference in nucleophilicity of the heteroatoms X and Y in a ′ (Scheme 10).     

Synthesis and aromatization of 2-(3,6-diaryl-2,5-dihydropyridazin-4-yl)-1H-benzimidazoles

Treatment of 1,4-diaryl-2-(1H-benzimidazol-2-yl)butane-1,4-diones with hydrazine gives the previously unknown 2-(3,6-diaryl-2,5-dihydropyridazin-4-yl)-1H-benzimidazoles which are aromatized by oxidation with nitrous acid to give 2-[3,6-diarylpyridazin-4-yl]-1H-benzimidazoles. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 252–259, February, 2008.     

Reactions of 9-substituted guanines with bromomalondialdehyde in aqueous solution predominantly yield glyoxal-derived adducts

Reactions of 9-ethylguanine, 2'-deoxyguanosine and guanosine with bromomalondialdehyde in aqueous buffers over a wide pH-range were studied. The main products were isolated and characterized by (1)H and (13)C NMR and mass spectroscopy. The final products formed under acidic and basic conditions were different, but they shared the common feature of being derived from glyoxal. Among the 1 : 1 adducts, 1,N(2)-(trans-1,2-dihydroxyethano)guanine adduct (6) predominated at pH < 6 and N(2)-carboxymethylguanine adduct (10a,b) at pH > 7. In addition to these, an N(2)-(4,5-dihydroxy-1,3-dioxolan-2-yl)methylene adduct (11a,b) and an N(2)-carboxymethyl-1,N(2)-(trans-1,2-dihydroxyethano)guanine adduct (12) were obtained at pH 10. The results of kinetic experiments suggest that bromomalondialdehyde is significantly decomposed to formic acid and glycolaldehyde under the conditions required to obtain guanine adducts. Glycolaldehyde is oxidized to glyoxal, which then modifies the guanine base more readily than bromomalondialdehyde. Besides the glyoxal-derived adducts, 1,N(2)-ethenoguanine (5a-c) and N(2),3-ethenoguanine adducts (4a-c) were formed as minor products, and a transient accumulation of two unstable intermediates, tentatively identified as 1,N(2)-(1,2,2,3-tetrahydroxypropano)(8) and 1,N(2)-(2-formyl-1,2,3-trihydroxypropano)(9) adducts, was observed.     

THE DIELS-ALDER REACTION OF DIPHENYL(1,2-PROPADIENYL)PHOSPHINE OXIDE AND DIPHENYL(1-PROPYNYL)PHOSPHINE OXIDE WITH CYCLOPENTADIENE

The Diels-Alder reaction of diphenyl(1,2-propadienyl)phosphine oxide 1 and diphenyl(1-propynyl)phosphine oxide 2 with cyclopentadiene is reported. 1 reacts smoothly at room temperature in the presence of one equivalent of aluminum trichloride to give the corresponding adducts endo 3a and exo 3b (90:10 ratio) whose structure was attributed on the basis of their ¹³C NMR spectra, whereas 2 is a poor dienophile, affording the corresponding adduct in low yield even under harsh conditions.     

2, 3-Alkadiensäureester als Dienophile; Anwendung bei der Synthese von (+)-(R)-Lasiodiplodin

2,3-Alkadienoates as Dienophiles, Application in the Synthesis of (+)-(R)-Lasiodiplodin Methyl 2, 3-alkadienoates 2 are shown to react at 80° with l, 1-dimethoxy-3trimethylsilyloxy-l, 3-butadiene (1) to give the adducts 3 in good yields. Rearrangement of 3 , catalyzed by p-toluenesulfonic acid or by sodium methoxide, affords the 6-substituted methyl 4-hydroxy-2-methoxybenzoates 4 (R ? H, CH₃, C₆H₅). An analogous reaction sequence starting with (-)-(11 R)-dodeca-2, 3-dien-11-olide ((-) -6 ) and 1 leads, via the adduct (R)-7 , to (+)-( R )-lasiodiplodin ((+) ?8 ) with properties identical to those of the natural product. The allene lactone (-) -6 was prepared by an intramolecular Wittig condensation of (R) ?5 , produced from (–)-(R)-9-hydroxydecanoic acid.     

Pseudoesters and derivatives. XXV. 1,3-Dipolar cycloaddition of diazomethane to 5-methoxy-3-pyrrolin-2-ones

Cycloaddition of diazomethane to pyrrolinones 1a,b,d,e affords only one regioisomer as a mixture of the epimeric pyrrolopyrazolines 2 and 2 ′,4-Halo derivatives 1f,g react with diazomethane to give the two possible regioisomers 2 and 3. The regio- and stereochemistry of the adducts is evidenced by the ¹H-nmr data. The primary adducts originated from the halopyrrolinones suffer dehydrohalogenation to give aromatized products, which by further methylation give derivatives of type 7, 8, 10 and 11.     

Pi-face-selective Diels-Alder reactions of 3,4-di-tert-butylthiophene 1-oxide and 1-imide and formation of 1,2-thiazetidines

3,4-Di-tert-butylthiophene 1-oxide (1a) reacted with a series of electron-deficient alkenic dienophiles at its syn-pi-face relating to the S=O bond to give [4+2] adducts in excellent yields. The 1-oxide 1a also reacted even with angle-strained dienophiles acenaphthylene and norbornene at its syn-pi-face to afford [4+2] adducts; in the latter case, norbornene reacted exclusively at its exo-pi-face. The oxide 1a reacted with dimethyl acetylenedicarboxylate to produce dimethyl 4,5-di-tert-butylphthalate in high yield with spontaneous extrusion of SO from the initial adduct even at room temperature. Similarly, 3,4-di-tert-butylthiophene 1-(p-toluenesulfonyl)imide (3a) reacted with alkenic dienophiles at its syn-pi-face relating to the S=N bond to give [4+2] adducts in good yields. The reaction of 3a with 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) afforded a 1,2-thiazetidine 12a, the first example of S-unoxidized 1,2-thiazetidine, in good yield, through rearrangement of the initial [4+2] adduct. The molecular structure of 12a is discussed on the basis of the X-ray crystallographic analysis. Comparison of the foregoing reactions leads to the conclusion that the 1-oxide 1a is more reactive as a diene than the 1-imide 3a, which is more reactive than 3,4-di-tert-butylthiophene 1,1-dioxide. The origin of the syn-pi-face selectivities of 1a and 3a in Diels-Alder reactions is discussed in terms of the orbital mixing rule and steric effect and also based on B3LYP/6-31G(d) calculations.     

New cycloaddition reactions of 1-phenyl-4-vinylpyrazole

1-Phenyl-4-vinylpyrazole reacts with methyl propiolate and N-phenylmaleimide giving via the Diels-Alder 1:1 adducts, products (4) and (8), and also the 1:2 adducts (5), (6) and (9) resulting from an “ene” reaction of the initially forced cycloadducts. The obtention of the adducts (5) and (6) in equimolecular amounts is a good example of the non-regioselective character of the “ene” reaction. The reaction with tetracyanoethylene takes place through the olefinic substituent giving the π² + π² adduct (10).     

The reduction and hydrolysis of some 7,7-diethylpyrazolo[1,2-a]-pyridazine-6,8(7H)dione derivatives

The chemistry of several of the Diels-Alder adducts formed by the reaction of 4,4-diethylpyrazoline-3,5-dione ( 1 ) with conjugated dienes was studied with respect to reduction (hydride and catalytic) and reaction with base. Reaction of the 2,3-dimethyl-1,3-butadiene adduct with lithium aluminum hydride followed by hydrogenation gave 1,3,5,6,7,8-hexahydro-cis-endo-6,7-dimethyl-2,2-diethylpyrazolo[1,2-a]pyridazine ( 11 ). Attempted conversion of this compound to 3,3-diethyl-cis-7,8-dimethyl-1,5-diazacyclononane ( 12 ) gave instead a compound which has been tentatively identified as N-(2,3-dimethyl-4-aminobutyl)-2-ethyl-2-methylbutanaldimine ( 14 ). Lithium aluminum hydride reduction of 4,4-diethylpyrazolidine-3,5-dione ( 22 ) or the adducts formed from 1 and cyclopentadiene or 1,3-cyclohexadiene gave good yields of 4,4-diethylpyrazolidine ( 21 ). This later reduction gave a new and efficient synthetic route to the pyrazolidine ring system. Lithium aluminum hydride reduction of 5,6,7,8-tetrahydro-5,8-ethano-2,2-diethylpyrazolo[1,2-a]pyridazine-1,3(2H)dione ( 26 ) followed by hydrogenolysis led to a high yield of 4,4-diethyl-2,6-diazabicyclo[5.2.2]undecane ( 28 ) which is the first reported example of this ring system. Reaction of several of the adducts with ethanolic potassium hydroxide resulted in the opening of the five-membered ring.     

Ring closure of 1-[4-(imidazol-1-yl)phenyl]-3-phenyl-2-propen-1-one derivatives to potential biologically active compounds

1-[4-(Imidazol-1-yl)phenyl]-3-phenyl-2-propen-1-one 1 reacted with acetone cyanohydrin, ethyl phenylacetate and cyanoacetamide to give the adducts 2, 8 and 10 respectively. Action of hydrazine hydrate on both the γ-ketonitrile 2 and the corresponding γ-ketoacid 4 led to pyridazine derivatives 3 and 5 . 4,5-Dihydropyridazinone 5 was dehydrogenated by the action of bromine in acetic acid to give pyridazinone 6 . Cyclization of acid 8 in acetic medium resulted in α-pyrone 9 . Cyanopentanamide 10 was converted with hydrochloric acid into δ-ketoacid 13 which led to α-pyrone 14 via an intramolecular dehydration. Refluxing 10 in the presence of acetic acid and ammonium acetate gave 3,4-dihydropyridone 11 which was dehydrogenated to produce pyridone 12 .     

Diels-Alder reactions of nitro-2(1H)-pyridones with 2,3-dimethyl-1,3-butadiene

Diels-Alder (DA) reactions of 3- or 5-nitro-2(1H)-pyridones and nitro-2(1H)-pyridones containing a methoxycarbonyl group with 2,3-dimethyl-1,3-butadiene were examined. The DA reactions of 3-nitro-2(1H)-pyridones in this paper represent, to the best of our knowledge, the first report of DA reactions of 3-substituted 2(1H)-pyridones and consequent production of isoquinolones. Performing the same reactions with 5-nitro-2(1H)-pyridones yielded quinolones. DA reactions of 2(1H)-pyridones with nitro and methoxycarbonyl groups produced isoquinolones, quinolones and phenanthridones (the double DA adducts), aromatized or hydrogenated. The substituent effect was evaluated by calculating the activation energy, using the ab initio MO method.     

Controlling silica surfaces using responsive coupling agents

The surface chemistry of silica was modified using coupling agents capable of participating in oxidation or in the Diels-Alder (and retro Diels-Alder) reactions. The synthesis of the latter coupling agents, using trialkoxysilane groups linked to a cyclopentadiene structure, was achieved by the condensation of sodium cyclopentadienolide with 1-chlorodimethylsilyl-3-triethoxysilylpropane to give 1-cyclopentadienyldimethylsilyl-3-trialkoxysilylpropane. The cyclopentadiene ring in this structure was shown to undergo normal Diels-Alder chemistry with maleimides or maleic anhydride to give 7-(dimethylsilylpropyltrialkoxysilane)-5-norbornene-2,3-dicarboxylic acid anhydride. The retro Diels-Alder reaction of 7-(dimethylsilylpropyltrialkoxysilane)-5-norbornene-2,3-dicarboxylic acid anhydride in solution was not very efficient: the adduct is very stable and only undergoes the retro Diels-Alder reaction at temperatures in excess of 200 °C. Once grafted to the surface, however, the retro Diels-Alder reaction was achieved at a level greater than 90% by use of thermolysis in the presence of free cyclopentadiene. In addition, a polyene-based coupling agent derived from squalene was prepared by hydrosilylation using HMe₂SiOSiMe₂CH₂CH₂Si(OEt)₃. Once grafted to the surface, oxidation by ozone led to ozonides that could be reduced to ketone/aldehyde groups. These in turn could be trapped by functional groups such as hydrazines to make surface-bound hydrazones. With both types of coupling agents, the surface energy and nature of the functional groups bound to the surface could be changed on demand in response to an external stimulus.