Liquid trapping after supercritical fluid extraction with modified carbon dioxide

A polarity test mix consisting of acetophenone, N,N-dimethylaniline, naphthalene, 2-naphthol, and n-tetracosane was spiked onto sand and extracted with carbon dioxide modified with acetonitrile, methanol, or toluene. The extracts were collected in chloroform, hexane, methanol, or a mixed collection solvent consisting of equal parts chloroform-hexane-methanol. The mixed collection solvent which showed excellent recoveries for pure CO₂, had the worst recoveries of all the collection solvents with modified CO₂. Overall hexane was the best collection solvent studied for these analytes under these extraction conditions.     

Direct coupling of capillary supercritical fluid chromatography with supercritical fluid extraction using modified carbon dioxide

Capillary supercritical fluid chromatography has been directly coupled with supercritical fluid extraction using modified carbon dioxide. The mixed fluids were prepared with a single pump on-line mixing system. The most important step in the SFE-SFC interface was the elimination of the modifier solvent. This was achieved by use of a coupled trap, 0.1 mm i.d. and 0.53 mm i.d. capillary tubing connected in series, with the collected solutes refocused on the second (0.53 mm i.d.) trap before transfer into the separation column. This enabled complete elimination of various modifier solvents and high efficiency collection of the solutes. The effect of the modifier on trapping efficiency was investigated using methanol, ethanol, dichloromethane, hexane, and toluene at a variety of concentrations. n-Eicosane was, for example, trapped quantitatively by modified carbon dioxide containing up to 13 % (w/w) methanol. The use of the technique has been demonstrated by selective extraction of n-paraffins, fatty acid methyl esters, and alcohols from a silica matrix; the effect of different modifiers on the extraction of a mixture of pesticides from soil has also been investigated.     

Use of modifiers in on-line and off-line supercritical fluid extraction

For many applications using supercritical fluid extraction (SFE), modifiers may be required.This paper will present some findings regarding the use of various modifiers including methanol, hexane, acetone, chloroform, dichloromethane, toluene, and tributylphosphate, in on-line and off-line SFE with cryogenic adsorbent trapping. The specific applications involved the extractions of petroleum hydrocarbons and pesticides from naturally incurred soils.     

Trapping efficiencies of various collection solvents after supercritical fluid extraction

A polarity test mix consisting of acetophenone, N, N-dimethylaniline, naphthalene, decanoic acid, 2-naphthol, and n-tetracosane was spiked onto sand, and extracted with supercritical carbon dioxide, to evaluate the collection efficiency of various solvents and solvent mixtures. Nine single collection solvent systems and four mixed collection solvent systems were studied. When one-component collection solvents were employed, quantitative (above 90%) recovery of all analytes was not possible. With mixed collection solvents, recoveries of 90% or better with all analytes studied were possible.     

Determination of anabolic steroids in creatine nutritional supplements after supercritical fluid extraction

The effects of various parameters, i.e. extraction pressure, temperature, time, and modifier on the efficiency of extraction were investigated using an analytical-scale supercritical fluid extraction system. An optimal set of conditions for the extraction and determination by gas chromatography-mass spectrometry of trimethylsilyl derivatives of 4-androstene-3,17-dione, 1,4-androstadiene-3,17-dione, nandrolone, and testosterone in nutritional supplements was developed. The optimum amount of creatine supplement was 1 g, while the optimum pressure and temperature were determined to be 35 MPa and 80 °C, respectively. The optimum dynamic extraction time was 45 min. The limit of detection (LOD) of the investigated compounds ranged from 5 to 25 ng · g⁻¹ of supplement, while recoveries ranged from 76.1 to 86.6%. Correspondence: Petra Mikulcikova, Department of Analytical Chemistry, Faculty of Chemical Technology, University of Pardubice, nám. Cs. Legií 565, CZ 532 10 Pardubice, Czech Republic     

A solvent recirculation trapping device for supercritical fluid extraction of polyaromatic hydrocarbons

A new device has been developed for the trapping of volatile pollutants in trapping solvents. The device allows solvent recirculation and cryogenic trapping of evaporated volatiles to minimize the stripping effect and any losses of volatile analytes. Due to solvent recirculation, the trapping solvent column height remains constant during the extraction without any need for replenishment. Also mass transfer conditions are favorable due to the flattened shape of bubbles of CO2 and the longer extraction time. The bubbles have higher interfacial area and they have to pass a three times longer distance in the solvent column. The device produces more concentrated extracts, reduces solvent consumption, and reduces or eliminates its evaporation to the environment. The cryotrapping part reduces losses of volatile analytes and the stripping effect. It also enables single-phase extraction into much smaller solvent volumes. Due to constant and favorable extraction conditions, the precision of the method was also greatly improved (RSDs decreased from 2.2 to 0.8%). As proved by a set of rapid spiked-sample extractions of highly volatile compounds at very high flow rates, the relative standard deviation of the experiments performed in the new device is 3.5 times lower.     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

Development of a method for the rapid determination of pentachlorophenol in leather using supercritical fluid extraction with in situ derivatization

Pentachlorophenol (PCP) was extracted from leather with supercritical carbon dioxide and in situ acetylated under static SFE conditions in the presence of triethylamine. During the dynamic extraction step, the derivatives were removed from the matrix and collected with either a pure liquid (light petroleum) or a liquid-solid (light petroleum-solid sorbent (C18, alumina, Florisil or Celite)) trap. To prevent restrictor plugging, a suitable restrictor was designed. The clean-up of the extracts was optimized in this study. Different internal standards were tested and it was shown that not all of them were usable. The SFE results were compared with those obtained by Soxhlet extraction with methanol. With SFE instead of conventional Soxhlet extraction, the overall time required for determination of PCP in leather can be reduced from about 2 days to approx. 3 hours.     

Selectivity and efficiency enhancement of supercritical fluid extraction by application of reactive additives. I. The analysis of calcium montanate using citric acid as a complexing agent

It has been demonstrated that calcium montanate (a mixture of aliphatic hydrocarbons, fatty acid esters of C₂₈–C₃₂ acids, the calcium salts of these fatty acids, and the acids themselves) can be selectively extracted with supercritical fluids. By use of carbon dioxide, carbon dioxide containing 10% methanol, and carbon dioxide containing 10% methanol and citric acid (as a further additive), the various compound classes could be isolated with high selectivity. The addition of citric acid results in the complexation of Ca²⁺ and the simultaneous formation of the free fatty acids, which are soluble in the extractant.     

Supercritical fluid extraction / capillary supercritical fluid chromatography / Fourier transform infrared microspectrometry of polycyclic aromatic compounds in a coal tar pitch

The combination of supercritical fluid extraction, high resolution capillary supercritical fluid chromatography, and Fourier transform infrared microspectrometry is described for the separation and identification of polycyclic aromatic hydrocarbons in a coal tar pitch. The variable solvating power of the supercritical fluid was utilized to selectively fractionate the sample. The fluid extract was decompressed through a frit restrictor into the sample cavity of a cooled microvalve injector, where the analytes were deposited and concentrated for subsequent chromatographic analysis. Several of the analytes separated in the chromatograph were collected on a potassium bromide disc at a solvent elimination inter-face for subsequent infrared analysis involving the use of an infra-red microscope accessory. The spectra obtained show the power of this detection technique for distinguishing between isomers.     

The use of alternative fluids in on-line supercritical fluid extraction – capillary gas chromatography

A key feature differentiating analytical supercritical fluid extraction (SFE) from conventional liquid extraction is the possibility of varying the solvent strength of a supercritical fluid to achieve selective extractions of specific target compounds, or functional classes of compound, from complex matrices. This can be accomplished by using supercritical fluids other than carbon dioxide, for example, sulfur hexafluoride, nitrous oxide, or sulfur hexafluoride-modified carbon dioxide. The use of these fluids will be demonstrated by the characterization of complex environmental and petroleum matrices by directly coupled SFE – capillary GC. On-line SFE-GC involves the decompression of pressurized extraction fluid directly into the heated, unmodified capillary split injection port of the chromatograph. This paper will also show how, by adjustment of the extraction temperature and pressure, SFE selectivity may be further enhanced.     

Supercritical fluid extraction of lipids from linseed with on-line evaporative light scattering detection

Supercritical fluid extraction (SFE) is a green alternative method of extraction for neutral lipids in seeds compared to conventional methods utilizing organic solvents. In this work, a novel method where SFE is hyphenated with an evaporative light scattering detector is presented. The method was subsequently applied to determine lipid content in crushed linseed. The new method enables rapid quantification of extracted lipids as well as be ability to continuously monitor the extraction rate in real-time, thus being able to determine the time point of completed extraction.     

Headspace solid phase microextraction in-situ supercritical fluid extraction coupled to gas chromatography-tandem mass spectrometry for simultaneous determination of perfluorocarboxylic acids in sediments

Headspace solid phase microextraction (HS-SPME) in-situ supercritical fluid extraction (SFE) was investigated for the determination of trace amounts of perfluorocarboxylic acids (PFCAs) in sediments. Quantitation was performed by using gas chromatography coupled to negative chemical ionization-tandem mass spectrometry (GC-NCI-MS/MS). The optimum conditions of HS-SPME following SFE were obtained using 500 μL n-butanol as a derivatization reagent in supercritical carbon dioxide with static extraction for 10 min, then dynamic extraction for 20 min at 30 MPa and 70 °C and simultaneous collected with 100 μm film thickness PDMS fiber. The linear range of proposed method was from 5 to 5000 ng g(-1), with limit of detection ranging from 0.39 to 0.54 ng g(-1) and limit of quantitation ranging from 1.30 to 1.80 ng g(-1). The developed method was successfully applied to analyze PFCAs in sediments from rivers and beach near industrial areas. The concentrations of PFCAs determined are from 282 to 4473 ng g(-1).     

紫草油有效成分的高效液相色谱测定法及其在超临界流体萃取制备紫草油中的应用

紫草提取制备成的紫草油能够预防及治疗婴儿尿布疹、皮肤溃烂、湿疹等多种皮肤疾患,临床应用非常广泛,超临界流体萃取是紫草有效成分提取的优选方法.该文建立了紫草油有效成分的高效液相色谱(HPLC)测定方法,并以紫草油所含的有效成分含量为评价指标,采用三因素三水平正交试验法对紫草超临界流体萃取制备过程中的几个重要因素(萃取压力...