Synthesis and Diels-Alder Reactivity of 2,3,5,6-Tetramethylidenenorbornane

Pd-catalyzed double carbomethoxylation of the Diels-Alder adduct of cyclo-pentadiene and maleic anhydride yielded the methyl norbornane-2,3-endo-5, 6-exo-tetracarboxylate ( 4 ) which was transformed in three steps into 2,3,5,6-tetramethyl-idenenorbornane ( 1 ). The cycloaddition of tetracyanoethylene (TCNE) to 1 giving the corresponding monoadduct 7 was 364 times faster (toluene, 25°) than the addition of TCNE to 7 yielding the bis-adduct 9 . Similar reactivity trends were observed for the additions of TCNE to the less reactive 2,3,5,6-tetramethylidene-7-oxanorbornane ( 2 ). The following second order rate constants (toluene, 25°) and activation parameters were obtained for: 1 + TCNE → 7 : k₁ = (255 + 5) 10^?4 mol^?1 · s^?1, ΔH≠ = (12.2 ± 0.5) kcal/mol, ΔS≠ = (?24.8 ± 1.6) eu.; 7 + TCNE → 9 , k₂ = (0.7 ± 0.02) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.1 ± 1.0) kcal/mol, ΔS≠ = ( ?30 ± 3.5) eu.; 2 + TCNE → 8 : k₁ = (1.5 ± 0.03) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.8 ± 0.7) kcal/mol, ΔS≠ = (?26.4 ± 2.3) eu.; 8 + TCNE → 10 ; k₂ = (0.004 ± 0.0002) 10^?4 mol^?1 · s^?1, ΔH≠ = (17 ± 1.5) kcal/mol, ΔS≠ = (?30 ± 4) eu. The possible origins of the relatively large rate ratios k₁/k₂ are discussed briefly.     

Base hydrolysis of (αβ S)-(o-methoxy benzoato) (tetraethylenepentamine) cobalt(III) ion: A comparative study of the role of ion pairs and micelles

The kinetics of base hydrolysis of (αβ S)-(o -methoxy benzoato) (tetraethylenepentamine)cobalt(III) obeyed the rate law: k_obs = k_OH[OH^?], in the range 0.05 ? [OH^?]_T, mol dm^?3 ? 1.0, I = 1.0 mol dm^?3, and 20.0–40.0°C. At 25°C, k_OH = 13.4 ± 0.4 dm³ mol^?1 s^?1, ΔH^≠ = 93 ± 2 kJ mol^?1 and ΔS^≠ = 90 ± 5 JK^?1 mol^?1. Several anions of varying charge and basicity, CH₃CO₂^?, SO₃^2?, SO₄^2?, CO₃^2?, C₂O₄^2?, CH₂(CO₂)₂^2?, PO₄^3?, and citrate^3? had no effect on the rate while phthalate^2?, NTA^3?, EDTA^4?, and DTPA^5? accelerated the process via formation of the reactive ion pairs. The anionic (SDS), cationic (CTAB), and neutral (Triton X-100) micelles, however, retarded the reaction, the effect being in the order SDS> CTAB > Triton X-100. The importance of electrostatic and hydrophobic effects of the micelles on the selective partitioning of the reactants between the micellar and bulk aqueous pseudo-phases which control the rate are discussed. © 1994 John Wiley & Sons, Inc.     

Activation of the aromatic system by the SO2CF3 group: Kinetics study and structure–reactivity relationships

The rate constants for the reaction of 2,6‐bis(trifluoromethanesulfonyl)‐4‐nitroanisole with some substituted anilines have been measured by spectrophotometric methods in methanol at various temperatures. The data are consistent with the S_NAr mechanism. The effect of substituents on the rate of reaction has been examined. Good linear relationships were obtained from the plots of log k₁ against Hammett σ_para constants values at all temperature with negative ρ values (?1.68 to ?1.11). Activation parameters Δ^≠H varied from 41.6 to 54.3 kJ mol^?1 and Δ^≠S from ?142.7 to ?114.6 J mol^?1 K^?1. The δΔ^≠H and δΔ^≠S reaction constants were determined from the dependence of Δ^≠H and Δ^≠S activation parameters on the σ substituent constants, by analogy with the Hammett equation. A plot of Δ^≠H versus Δ^≠S for the reaction gave good straight line with 177°C isokinetic temperature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 203–210, 2010     

Anionic polymerization of propylene oxide: Isomerization of allyl ether to propenyl ether end groups

The isomerization of allyl ether to propenyl ether end group in anionically-polymerized poly (propylene oxide) was monitored by ¹H NMR spectroscopy. It was confirmed that the reaction followed a simple second-order rate law: ?d[allyl]dt = k₂[allyl] [O^?]. Values of k₂ determined over the 90–130°C temperature range, indicated an activation energy of 116 kJ mol^?1. © 1994 John Wiley & Sons, Inc.     

Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as      

Preparation and Diels-Alder Reactivity of 2,3,5,6,7,8-Hexamethylidenebicyclo [2.2.2]octane (‘[2.2.2]Hericene’). Force-field calculations of exocyclic dienes as a moiety of bicyclic skeletons

The [2.2.2]hericene ( 6 ), a bicyclo[2.2.2]octane bearing three exocyclic s-cis-butadiene units has been prepared in eight steps from coumalic acid and maleic anhydride. The hexaene 6 adds successively three mol-equiv. of strong dienophiles such as ethylenetetracarbonitrile (TCE) and dimethyl acetylenedicarboxylate (DMAD) giving the corresponding monoadducts 17 and 20 (k₁), bis-adducts 18 and 21 (k₂) and tris-adducts 19 and 22 (k₃), respectively. The rate constant ratio k₁/k₂ is small as in the case of the cycloadditions of 2,3,5,6-tetramethylidene-bicyclo [2.2.2]octane ( 3 ) giving the corresponding monoadducts 23 and 27 (k₁) and bis-adducts 25 and 29 (k₂) with TCE and DMAD, respectively. Constrastingly, the rate constant ratio k₂/k₃ is relatively large as the rate constant ratio k₁/k₂ of the Diels-Alder additions for 5,6,7,8-tetramethylidenebicyclo [2.2.2]oct-2-ene ( 4 ) giving the corresponding monoadducts 24 and 28 (k₁) and bis-adducts 26 and 30 (k₂). The following second-order rate constants (toluene, 25°) and activation parameters were obtained for the TCE additions: 3 +TCE→ 23 : k₁ = 0.591±0.012 mol^?1·l·s^?1, ΔH^≠=10.6±0.4 kcal/mol, and ΔS^≠ = ?24.0±1.4 cal/mol·K (e.u.); 23 +TCE→ 25 : k₂=0.034±0.0010 mol^?1·l·s^?1, ΔH^≠ = 10.6±0.6 kcal/mol, and ΔS^≠ = ?29.7±2.0 e.u.; 4 +TCE→ 26 : k₁ = 0.172±0.035 mol^?1·l·s^?1, ΔH^≠ 11.3±0.8 kcal/mol, and ΔS^≠ = ?24.0±2.8 e.u.; 24 +TCE→ 26 : k₂ = (6.1±0.2)·10^?4 mol^?1·l·s^?1, ΔH^≠ = 13.0±0.3 kcal/mol, and ΔS^≠ = ?29.5±0.8 e.u.; 6 +TCE→ 17 : k₁ = 0.136±0.002 mol^?1·l·s^?1, ΔH^≠ = 11.3±0.2 kcal/mol, and ΔS^≠ = ?24.5±0.8 e.u.; 17 +TCE→ 18 : k₂ = 0.0156±0.0003 mol^?1·l·s^?1, ΔH^≠ = 10.9±0.5 kcal/mol, and ΔS^≠ = ?30.1 ± 1.5 e.u.; 18 +TCE→ 19 : k₃=(5±0.2) · 10^?5 mol^?1 mol^?1 ·l·s^?1, ΔH^≠ = 15±3 kcal/mol, and ΔS^≠ = ?28 ± 8 e.u. The following rate constants were evaluated for the DMAD additions (CD₂Cl₂, 30°): 6 +DMAD→ 20 : k₁ = (10±1)·10^?4 mol^?1 · l·s^?1; 20 +DMAD→ 21 : k₂ = (6.5±0.1) · 10^?4 mol^?1 ·l·^?1; 21 +DMAD→ 22 : k₃ = (1.0±0.1) · 10^?4 mol^?1 ·l·s^?1. The reactions giving the barrelene derivatives 19, 22, 26 and 30 are slower than those leading to adducts that are not barrelenes. The former are estimated less exothermic than the latter. It is proposed that the Diels-Alder reactivity of exocyclic s-cis-butadienes grafted onto bicycle [2.2.1]heptanes and bicyclo [2.2.2]octanes that are modified by remote substitution of the bicyclic skeletons can be affected by changes inthe exothermicity of the cycloadditions, in agreement with the Dimroth and Bell-Evans-Polanyi principle. Force-field calculations (MMPI 1) of 3, 4, 6 and related exocyclic s-cis-butadienes as a moiety of bicyclo [2.2.2]octane suggested single minimum energy hypersurfaces for these systems (eclipsed conformations, planar dienes). Their flexibility decreases with the degree of unsaturation of the bicyclic skeleton. The effect of an endocyclic double bond is larger than that of an exocyclic diene moiety.     

A kinetic study of the oxidation of L-ascorbic acid by chromium(VI)

The reaction between chromium(VI) and L-ascorbic acid has been studied by spectrophotometry in the presence of aqueous citrate buffers in the pH range 5.69–7.21. The reaction is slowed down by an increase of the ionic strength. At constant ionic strength, manganese(II) ion does not exert any appreciable inhibition effect on the reaction rate. The rate law found is where K_p is the equilibrium constant for protonation of chromate ion and k_r is the rate constant for the redox reaction between the active forms of the oxidant (hydrogenchromate ion) and the reductant (L-hydrogenascorbate ion). The activation parameters associated with rate constant k_r are E_a = 20.4 ± 0.9 kJ mol^?1, ΔH^≠ = 17.9 ± 0.9 kJ mol^?1, and ΔS^≠=?152 ± 3 J K^?1 mol^?1. The reaction thermodynamic magnitudes associated with equilibrium constant K_p are ΔH⁰ = 16.5 ± 1.1 kJ mol^?1 and ΔS⁰ = 167 ± 4 J K^?1 mol^?1. A mechanism in accordance with the experimental data is proposed for the reaction. © 1993 John Wiley & Sons, Inc.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

氢过碘酸）合银（III）配离子氧化L-脯氨酸的反应动力学及机理

L-脯氨酸独有的亚胺基使其在生物医药领域具有许多独特的功能,并广泛用作不对称有机化合物合成的有效催化剂。本文在碱性介质中研究了二（氢过碘酸）合银（III）配离子氧化 L-脯氨酸的反应。经质谱鉴定,脯氨酸氧化后的产物为脯氨酸脱羧生成的 γ-氨基丁酸盐;氧化反应对脯氨酸及Ag(III) 均为一级;二级速率常数 k′ 随 [IO₄^-] 浓度增加而减小,而与 [OHˉ] 的浓度几乎无关;推测反应机理应包括 [Ag(HIO₆)₂]^5-与 [Ag(HIO₆)(H₂O)(OH)]^2-之间的前期平衡,两种Ag（III）配离子均作为反应的活性组分,在速控步被完全去质子化的脯氨酸平行地还原,两速控步对应的活化参数为： k₁ (25 ^oC)＝1.87±0.04（mol·L^-1)^-1s^-1,∆ H₁^≠＝45±4 kJ · mol^-1, ∆ S₁^≠＝-90±13 J· K^-1·mol^-1 and k₂ (25 ^oC) ＝3.2±0.5（mol·L^-1)^-1s^-1, ∆ H₂^≠＝34±2 kJ · mol^-1, ∆ S₂^≠＝-122 ±10 J· K^-1·mol^-1。本文第一次发现 [Ag(HIO₆)₂]^5-配离子也具有氧化反应活性。     

Kinetics and mechanism of decomposition of intermediate complex during oxidation of pectate polysaccharide by potassium permanganate in alkaline solutions

The kinetics of decomposition of an [Pect·Mn^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at various temperatures of 15–30°C and a constant ionic strength of 0.1 mol dm^?3. The decomposition reaction was found to be first‐order in the intermediate concentration. The results showed that the rate of reaction was base‐catalyzed. The kinetic parameters have been evaluated and found to be ΔS^≠ = ? 190.06 ± 9.84 J mol^?1 K^?1, ΔH^≠ = 19.75 ± 0.57 kJ mol^?1, and ΔG^≠ = 76.39 ± 3.50 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 67–72, 2003     

Reaction of tetramethyl-1,2-dioxetane with triphenylphosphine: Activation parameters for the formation of 2,2-dihydro-4,4,5,5-tetramethyl-2,2,2-triphenyl-1,3,2-dioxaphospholane

The reaction of tetramethyl-1,2-dioxetane ( 1 ) and triphenylphosphine ( 2 ) in benzene-d₆ produced 2,2-dihydro-4,4,5,5-tetramethyl-2,2,2-triphenyl-1,3,2-dioxaphospholane ( 3 ) in ?90% yield over the temperature range of 6–60°. Pinacolone and triphenylphosphine oxide ( 4 ) were the major side products [additionally acetone (from thermolysis of 1 ) and tetramethyloxirane ( 5 ) were noted at the higher temperatures]. Thermal decomposition of 3 produced only 4 and 5 . Kinetic studies were carried out by the chemiluminescence method. The rate of phosphorane was found to be first order with respect to each reagent. The activation parameters for the reaction of 1 and 2 were: Ea ? 9.8 ± 0.6 kcal/mole; ΔS^≠ = ?28 eu; k_30° = 1.8 m^?1sec^?1 (range = 10–60°). Preliminary results for the reaction of 1 and tris (p-chlorophenyl)phosphine were: Ea ? 11 kcal/mole, ΔS^≠ = ?24 eu, k_30° = 1.3 M^?1sec^?1 while those for the reaction of 1 and tris(p-anisyl)phosphine were: Ea ? 8.6 kcal/mole, ΔS^≠ = ?29 eu, k_30° = 4.9 M^?1 sec^?1.     

Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

Kinetic study of the ligand substitution on the trimethylplatinum(iv) complexes with unidentate ligands

Ligand substitution kinetics for the reaction [Pt^IVMe₃(X)(NN)]+NaY=[Pt^IVMe₃(Y)(NN)]+NaX, where NN=bipy or phen, X=MeO⁻, CH₃COO⁻, or HCOO⁻, and Y=SCN⁻ or N₃⁻, has been studied in methanol at various temperatures. The kinetic parameters for the reaction are as follows. The reaction of [PtMe₃(OMe)(phen)] with NaSCN: k₁=36.1±10.0 s⁻¹; ΔH₁^≠=65.9±14.2 kJ mol⁻¹; ΔS₁^≠=6±47 J mol⁻¹ K⁻¹; k₋₂=0.0355±0.0034 s⁻¹; ΔH₋₂^≠=63.8±1.1 kJ mol⁻¹; ΔS₋₂^≠=−58.8±3.6 J mol⁻¹ K⁻¹; and k₋₁/k₂=148±19. The reaction of [PtMe₃(OAc)(bipy)] with NaN₃: k₁=26.2±0.1 s⁻¹; ΔH₁^≠=60.5±6.6 kJ mol⁻¹; ΔS₁^≠=−14±22 J mol⁻¹K⁻¹; k₋₂=0.134±0.081 s⁻¹; ΔH₋₂^≠=74.1±24.3 kJ mol⁻¹; ΔS₋₂^≠=−10±82 J mol⁻¹K⁻¹; and k₋₁/k₂=0.479±0.012. The reaction of [PtMe₃(OAc)(bipy)] with NaSCN: k₁=26.4±0.3 s⁻¹; ΔH₁^≠=59.6±6.7 kJ mol⁻¹; ΔS₁^≠=−17±23 J mol⁻¹K⁻¹; k₋₂=0.174±0.200 s⁻¹; ΔH₋₂^≠=62.7±10.3 kJ mol⁻¹; ΔS₋₂^≠=−48±35 J mol⁻¹K⁻¹; and k₋₁/k₂=1.01±0.08. The reaction of [PtMe₃(OOCH)(bipy)] with NaN₃: k₁=36.8±0.3 s⁻¹; ΔH₁^≠=66.4±4.7 kJ mol⁻¹; ΔS₁^≠=7±16 J mol⁻¹K⁻¹; k₋₂=0.164±0.076 s⁻¹; ΔH₋₂^≠=47.0±18.1 kJ mol⁻¹; ΔS₋₂^≠=−101±61 J mol⁻¹ K⁻¹; and k₋₁/k₂=5.90±0.18. The reaction of [PtMe₃(OOCH)(bipy)] with NaSCN: k₁ =33.5±0.2 s⁻¹; ΔH₁^≠=58.0±0.4 kJ mol⁻¹; ΔS₁^≠=−20.5±1.6 J mol⁻¹ K⁻¹; k₋₂=0.222±0.083 s⁻¹; ΔH₋₂^≠=54.9±6.3 kJ mol⁻¹; ΔS₋₂^≠=−73.0±21.3 J mol⁻¹ K⁻¹; and k₋₁/k₂=12.0±0.3. Conditional pseudo-first-order rate constant k₀ increased linearly with the concentration of NaY, while it decreased drastically with the concentration of NaX. Some plausible mechanisms were examined, and the following mechanism was proposed. [Note to reader: Please see article pdf to view this scheme.] © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 523–532, 1998     

Dynamic proton magnetic resonance studies on complex spin systems. Non-mutual three-spin exchange in N-(trideuteriomethyl)-2-cyanoaziridine

At room temperature and below, the proton NMR spectrum of N-(trideuteriomethyl)-2-cyanoaziridine consists of two superimposed ABC patterns assignable to two N-invertomers; a single time-averaged ABC pattern is observed at 158.9°C. The static parameters extracted from the spectra in the temperature range from –40.3 to 23.2°C and from the high-temperature spectrum permit the calculation of the thermodynamic quantities ΔH⁰ = ?475±20 cal mol^?1 (?1.987 ± 0.084 kJ mol^?1) and ΔS⁰ = 0.43±0.08 cal mol^?1 K^?1 (1.80±0.33 J mol^?1 K^?1) for the cis ? trans equilibrium. Bandshape analysis of the spectra broadened by non-mutual three-spin exchange in the temperature range from 39.4–137.8°C yields the activation parameters ΔH_tc^≠ = 17.52±0.18 kcal mol^?1 (73.30±0.75 kJ mol^?1), ΔS_tc^≠ = ?2.08±0.50 cal mol^?1 K^?1 (?8.70±2.09 J mol^?1 K^?1) and ΔG_tc^≠ (300 K) = 18.14±0.03 kcal mol^?1 (75.90±0.13 kJ mol^?1) for the trans → cis isomerization. An attempt is made to rationalize the observed entropy data in terms of the principles of statistical thermodynamics.     

Thermal Behavior of N,N＇Bis[N-（2,2,2-trinitroethyl）-N-nitro]ethylenediamine

The thermal behavior and kinetic parameters of the exothermic decomposition reaction of N‐N‐bis[N‐(2,2,2‐tri‐nitroethyl)‐N‐nitro]ethylenediamine in a temperature‐programmed mode have been investigated by means of differential scanning calorimetry (DSC). The results show that kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of this reaction are 3(1 ‐α)^2/3, 203.67 kJ·mol^?1 and 10^20.61s^?1, respectively. The critical temperature of thermal explosion of the compound is 182.2 °C. The values of ΔS^≠ ΔH^≠ and ΔG^≠ of this reaction are 143.3 J·mol^?1·K^?1, 199.5 kJ·mol^?1 and 135.5 kJ·mol^?1, respectively.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Kinetics of the bromate–bromide reaction at high bromide concentrations

At bromide concentrations higher than 0.1 M, a second term must be added to the classical rate law of the bromate–bromide reaction that becomes ?d[BrO₃^?]/dt = [BrO₃^?][H⁺]²(k₁[Br^?] + k₂[Br^?]²). In perchloric solutions at 25°C, k₁ = 2.18 dm³ mol^?3 s^?1 and k₂ = 0.65 dm⁴ mol^?4 s^?1 at 1 M ionic strength and k₁ = 2.60 dm³ mol³ s^?1and k₂ = 1.05 dm⁴ mol^?4 s^?1 at 2 M ionic strength. A mechanism explaining this rate law, with Br₂O₂ as key intermediate species, is proposed. Errors that may occur when using the Guggenheim method are discussed. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 17–21, 2007     

Temperature and pressure effects on the kinetics of the Bromate ion-iodide ion-L-ascorbic acid clock reaction

The kinetics of the bromate ion-iodide ion-L-ascorbic acid clock reaction was investigated as a function of temperature and pressure using stopped-flow techniques. Kinetic results were obtained for the uncatalyzed as well as for the Mo(VI) and V(V) catalyzed reactions. While molybdenum catalyzes the BrO-I^? reaction, vanadium catalyzes the direct oxidation of ascorbic acid by bromate ion. The corresponding rate laws and kinetic parameters are as follows. Uncatalyzed reaction: r₂ = k₂[BrO] [I^?][H⁺]², k₂ = 38.6 ± 2.0 dm⁹ mol^?3 s^?1, ΔH? = 41.3 ± 4.2 kJmol^?1, ΔS? = ?75.9 ± 11.4 Jmol^?1 K^?1, ΔV? = ?14.2 ± 2.9 cm³ mol^?1. Molybdenum-catalyzed reaction: r′₂ = k₂[BrO] [I^?] [H⁺]² + k_Mo[BrO] [I^?] [ H⁺]²[M₀(VI)], k_Mo = (2.9 ± 0.3)10⁶ dm¹² mol^?4 s^?1, ΔH? = 27.2 ± 2.5 kJmol^?1, ΔS? = ?30.1 ± 4.5 Jmol^?1K^?1, ΔV? = 14.2 ± 2.1 cm³ mol^?1. Vanadium-catalyzed reaction: r′₁ = k_V[BrO] [V(V)], k_V = 9.1 ± 0.6 dm³ mol^?1 s^?1, ΔH? = 61.4 ± 5.4 kJmol^?1, ΔS? = ?20.7 ± 3.1 Jmol^?1K^?1, ΔV? = 5.2 ± 1.5 cm³ mol^?1. On the basis of the results, mechanistic details of the BrO-I^? reaction and the catalytic oxidation of ascorbic acid by BrO are elaborated. © 1995 John Wiley & Sons, Inc.     

Substitution and Isomerization of Nitrite Ion at a Cobalt(III) Centre Having a Coordinated Pentadentate Ligand with Two Nitrogen and Three Sulfur Donor Atoms

The influence of placing thioether linkages trans to a site of nitrito substitution and spontaneous nitrito-tonitro isomerization is reported for the [CoQS(H₂O)]³⁺ cation where QS is 1,11-diamino-3,6,9-trithiaundecane. Preparation and characterization is described for the aqua and nitrito complexes. Rate data for the substitution process is presented at 17.7, 25.0 and 35.0°C. It is consistent with the mechanism first proposed by Basolo and Pearson in which N₂O₃ is the nitrosation agent. [CoQS(H₂O)]³⁺ is three hundred times more reactive than [Co(NH₃)₅H₂O]³⁺ under identical conditions. Isomerization is dramatically slower than the conversion of [CoQS(H₂O)³⁺ to [CoQS(ONO)]²⁺. The isomerization process was studied at 5 wavelengths, 3 temperatures and various conditions of acid and nitrite ion at an ionic strength of 0.11–0.60 M. Studies at 25°C give k_isom = 1.21 ± 0.12 × 10^?4 sec ^?1. Similar determinations at 17.7 and 35.0°C give k_isom = 3.84 ± 0.65 × 10^?5 sec^?1 and 3.59 ± 0.13 × 10^?4 sec^?1 respectively. The thermodynamic activation parameters ΔH^≠, ΔG^≠, and ΔS^≠ obtained from an Eyring plot gives ΔH^≠ = 111.3 kJ/mol, ΔS^≠ = + 53 J/molK and ΔG^≠ = 95.4 kJ/mol. These results are discussed in the context of present knowledge and experience with other cobalt(III) ligand systems.