共查询到20条相似文献,搜索用时 31 毫秒
1.
Due to their complexity, the basic plastic properties of all quasicrystalline materials are essentially unknown [M. Feuerbacher, C. Thomas, K. Urban, Plastic behaviour of quasicrystalline materials, in Quasicrystals: Structure and Physical Properties, H.R. Trebin, ed., Wiley/VCH, Berlin, 2003]. Plastic deformation of cracks in icosahedral quasicrystals have been analyzed in a strict and systematic form and the crack tip opening displacement (CTOD) and size of the plastic zone around the crack tip was determined exactly. CTOD is suggested as a parameter of plastic fracture for quasicrystalline materials. The present work may also provide a novel methodology for plastic analysis of quasicrystals. 相似文献
2.
Elasto-plastic crack solutions for some one- and two-dimensional quasicrystals have been found based on the generalized Dugdale–Barenblatt model. The size of the plastic zone and crack tip opening displacement are determined, from which a plastic fracture criterion for the materials is suggested. 相似文献
3.
Vladimir Azhazha Sergey Dub Georgiy Khadzhay Boris Merisov Sergey Malykhin Anatoliy Pugachov 《哲学杂志》2013,93(10):983-990
Ti–Zr–Ni samples with a substantial predominance of icosahedral quasicrystalline phase were produced by the melt-spinning technique. Their structure and mechanical properties were studied by X-ray diffraction and nanoindentation methods. The quasicrystalline phase was found to have a primitive lattice with the quasicrystallinity parameter a q = 0.5200–0.5210?nm. Quasicrystalline deformation behaviour under nanoindentation versus phase composition and structure is discussed in comparison with single crystal W–12?wt%?Ta. The estimated elastic modulus E of the quasicrystalline phase shows no correlation with the element composition. The nanohardness was shown to increase with increasing quasicrystalline-phase perfection. Load–displacement curves of Ti–Zr–Ni quasicrystals (QCs) show stepwise character with alternation of elastic and plastic sections. Such non-uniform plastic flow in QCs might be caused by the localization of plastic deformation in shear bands. The non-uniformity of the plastic deformation increases with the increasing quasicrystalline phase perfection. 相似文献
4.
Elastic–plastic stress analysis has been carried out for the plastic zone size and crack tip opening displacement of a sub-interface crack with small scale yielding. In our study, the shape of plastic zone is assumed as a long, slim strip at both crack tips. In the plastic zone, both normal stress and shear stress exist and are considered due to the bi-material interface. The values of the plastic zone size, normal stress and shear stress are determined by satisfying the conditions where both Modes I and II stress intensity factors vanish and Von Mises yield criterion is met. In the present paper, the sub-interface crack is simulated by continuously distributed dislocations which will result in singular integral equations. Those singular integral equations can be solved by reducing them to a set of linear equations. The values of the plastic zone size and crack tip opening displacement are obtained through an iterative procedure. Finally, the effect of normalized loading, normalized crack depth (distance to the interface) and Dundurs’ parameters on the normalized plastic zone size and the normalized crack tip opening displacement is discussed. 相似文献
5.
A plastic crack model for smectic A liquid crystals under longitudinal shear is suggested. The solution of the screw dislocation in smectic A is the key to the correct result that we obtained by overcoming a longstanding puzzle. We further use the dislocation pile-up principle and the singular integral equation method to construct the solution of the crack in the phase. From the solution, we can determine the size of the plastic zone at the crack tip and the crack tip opening (tearing) displacement, which are the parameters relevant to the local stability/instability of materials. Our results may be useful for developing soft-matter mechanics. 相似文献
6.
The propagation of cracks in two-dimensional decagonal model quasicrystals is studied under mode I loading by means of molecular dynamics simulations. In particular, we investigate the dependence on temperature, applied load and underlying structure. The samples are endowed with an atomically sharp crack and strained by linear scaling of the displacement field. Three different regimes of propagation and discernible with increasing temperature. For low temperatures the crack velocity increases monotonically with increasing applied load. We observe that the crack follows the path of dislocations nucleated at its tip. For temperatures above 0.3?T m, where T m is the melting temperature, the crack does not remain atomically sharp but becomes blunt spontaneously. In the temperature range between 0.7?T m and 0.8?T m the quasicrystal fails by nucleation, growth and coalescence of microvoids. This gradual dislocation-free crack extension is caused by plastic deformation which is mediated by localized rearrangements comparable with the so-called shear transformation zones. These are also observed in amorphous solids. Thus, at low temperatures the crack propagates along crystallographic planes just as in periodic crystals, whereas at high temperatures a glass-like behaviour is dominant. 相似文献
7.
Fracture experiments using micrometer-sized notched cantilevers were conducted to investigate the possibility of determining fracture mechanical parameters for the semi-brittle material tungsten. The experiments were also used to improve the understanding of semi-brittle fracture processes for which single crystalline tungsten serves as a model material. Due to the large plastic zone in relation to the micrometer sample size, linear elastic fracture mechanics is inapplicable and elastic-plastic fracture mechanics has to be applied. Conditional fracture toughness values J Q were calculated from corrected force vs. displacement diagrams. Crack growth was accessible by direct observation of in-situ experiments as well as with the help of unloading compliances. As a further tool, fracture toughness can be determined via crack tip opening displacement. The micro samples behave more ductile and exhibit higher fracture toughness values compared to macro-sized single crystals and fail by stable crack propagation. 相似文献
8.
An analytical investigation on the plastic zone size of a crack near a coated circular inclusion under three different loading conditions of uniaxial tension, uniform tension and pure shear was carried out. Both the crack and coated circular inclusion are embedded in an infinite matrix, with the crack oriented along the radial direction of the inclusion. In the solution procedure, the crack is simulated as a continuous distribution of edge dislocations. With the Dugdale model of small-scale yielding [J. Mech. Phys. Solids 8 (1960) p. 100], two thin strips of yielded plastic zones are introduced at both crack tips. Using the solution for a coated circular inclusion interacting with a single dislocation as the Green's function, the physical problem is formulated into a set of singular integral equations. Using the method of Erdogan and Gupta [Q. J. Appl. Math. 29 (1972) p. 525] and iterative numerical procedures, the singular integral equations are solved numerically for the plastic zone sizes and crack tip opening displacement. 相似文献
9.
Quasicrystals are aperiodic structures with long-range orientational order. Unlike crystals, quasicrystals can, in principle, possess any non-crystallographic rotational symmetry. However, only a few of these rotational symmetries have been observed. By using Monte Carlo simulations of colloidal particles in laser interference patterns with quasicrystalline symmetry, we compare the onset of quasicrystalline order for different rotational symmetries in two dimensions. We find that quasicrystals with 5-, 8-, 10-, and 12-fold rotational axes can be induced with lower laser intensities than quasicrystals with other non-crystallographic rotational symmetries. We relate this finding to the number of local symmetry centers in the respective interference patterns. 相似文献
10.
Stage-I fatigue crack propagation is investigated using 3D discrete dislocation dynamics (DD) simulations. Slip-based propagation mechanisms and the role of the pre-existing slip band on the crack path are emphasized. Stage-I crack growth is found to be compatible with successive decohesion of the persistent slip band/matrix interface rather than a mere effect of plastic irreversibility. Corresponding crack tip slip displacement magnitude and the associated crack growth rate are evaluated quantitatively at various tip distances from the grain boundary. This shows that grain boundaries systematically amplify slip dispersion ahead of the crack tip and consequently, slow down the stage-I crack growth rate. The results help in developing an original crack propagation model, accounting for the boundary effects relevant to polycrystals. The crack growth trend is then evaluated from calculations of the energy changes due to crack length increments. It is shown that the crack necessarily propagates by increments smaller than 10 nm. 相似文献
11.
The measurement and analysis of broad nuclear magnetic resonance (NMR) spectra of quasicrystals require experimental methods and theoretical interpretations different from NMR investigations of regular periodic crystals. Frequency- and field-sweep methods for recording quasicrystalline NMR spectra are described and compared with the measurement of27Al NMR spectra of icosahedral AlPdMn and decagonal AlNiCo quasicrystals. The nuclear spin interactions that determine the NMR line shape are the same for both types of the above Al-based quasicrystals, where the electric quadrupolar interaction with the broad distribution of its electric field gradient parameters predominantly determines the shape of the broad satellite “background” intensity. The essential observations are an almost isotropic27Al NMR spectrum of the icosahedral quasicrystals and a strong angular dependence of the spectrum of decagonal quasicrystals. 相似文献
12.
With the rapid development of topological states in crystals, the study of topological states has been extended to quasicrystals in recent years. In this review, we summarize the recent progress of topological states in quasicrystals, particularly focusing on one-dimensional (1D) and 2D systems. We first give a brief introduction to quasicrystalline structures. Then, we discuss topological phases in 1D quasicrystals where the topological nature is attributed to the synthetic dimensions associated with the quasiperiodic order of quasicrystals. We further present the generalization of various types of crystalline topological states to 2D quasicrystals, where real-space expressions of corresponding topological invariants are introduced due to the lack of translational symmetry in quasicrystals. Finally, since quasicrystals possess forbidden symmetries in crystals such as five-fold and eight-fold rotation, we provide an overview of unique quasicrystalline symmetry-protected topological states without crystalline counterpart. 相似文献
13.
This paper deals with the three-dimensional problem of a spheroidal quasicrystalline inclusion, which is embedded in an infinite matrix consisting of a two-dimensional quasicrystal subject to uniform loadings at infinity. Based on the general solution of quasicrystals in cylindrical coordinates, a series of displacement functions is adopted to obtain the explicit real-form results for the coupled fields both inside the inclusion and matrix, when three different types of loadings are studied: axisymmetric, in-plane shear and out-of-plane shear. Furthermore, the present results are reduced to the limiting cases involving inhomogeneities including rigid inclusions, cavities and penny-shaped cracks. 相似文献
14.
PLANE ELASTICITY PROBLEM OF TWO-DIMENSIONAL OCTAGONAL QUASICRYSTALS AND CRACK PROBLEM 总被引:1,自引:0,他引:1
下载免费PDF全文
![点击此处可从《中国物理》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The plane elasticity theory of two-dimensional octagonal quasicrystals is developed in this paper. The plane elasticity problem of quasicrystals is reduced to a single higher-order partial differential equation by introducing a displacement function. As an example, the exact analytic solution of a Mode I Griffith crack in the material is obtained by using the Fourier transform and dual integral equations theory, then the displacement and stress fields, stress intensity factor and strain energy release rate can be calculated. The physical significance of the results relative to the phason and the difference between the mechanical behaviours of the crack problem in crystals and quasicrystals are figured out. These provide important information for studying the deformation and fracture of the new solid phase. 相似文献
15.
The evolution of the distribution of interstitial impurity atoms in the plastic zone around the tip of a tension crack is
analyzed. The transport of point defects is determined by: 1) the hydrostatic component of the elastic stress at the crack
tip, created by the superposition of the elastic fields of the crack and dislocations; 2) the elastic field of moving dislocations
(“sweeping out” of interstitial impurity atoms); 3) the dislocation-driven transport of point defects present in the dislocation
cores. The contributions of each mechanism of transport of point defects to the crack tip are calculated over the entire time
from the start of loading of a sample containing a crack until an equilibrium distribution of plastic deformation is established
after the cessation of loading. Numerical calculations are carried out for interstitial hydrogen atoms dissolved in an α-Fe crystal.
Fiz. Tverd. Tela (St. Petersburg) 39, 1580–1585 (September 1997) 相似文献
16.
JETP Letters - A new phenomenon is detected in quasicrystals: it is shown that the so-called “exotic” properties of real quasicrystalline materials are due to the presence of metastable... 相似文献
17.
A Dugdale–Barenblatt model for a strip with a semi-infinite crack embedded in decagonal quasicrystals
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The present study is to determine the solution of a strip with a semi-infinite crack embedded in decagonal quasicrystals, which transforms a physically and mathematically daunting problem. Then cohesive forces are incorporated into a plastic strip in the elastic body for nonlinear deformation. By superposing the two linear elastic fields, one is evaluated with internal loadings and the other with cohesive forces, the problem is treated in Dugdale-Barenblatt manner. A simple but yet rigorous version of the complex analysis theory is employed here, which involves conformal mapping technique. The analytical approach leads to the establishment of a few equations, which allows the exact calculation of the size of cohesive force zone and the most important physical quantity in crack theory: stress intensity factor. The analytical results of the present study may be used as the basis of fracture theory of decagonal quasicrystals. 相似文献
18.
Synchrotron X-ray microtomography has been utilized for the in-situ observation of steady-state plane-strain fatigue crack growth. A high-resolution experimental configuration and phase contrast imaging technique have enabled the reconstruction of crack images with an isotropic voxel with a 0.7 µm edge. The details of a crack are readily observed, together with evidence of the incidence and mechanical influence of closure. After preliminary investigations of the achievable accuracy and reproducibility, a variety of measurement methods are used to quantify crack-opening displacement (COD) and closure from the tomography data. Utilization of the physical displacements of microstructural features is proposed to obtain detailed COD data, and its feasibility is confirmed. Loss of fracture surface contact occurs gradually up to the maximum load. This is significantly different from tendencies reported where a single definable opening level is essentially assumed to exist. The closure behaviour is found to be attributable mainly to pronounced generation of mode III displacement which may be caused by local crack topology. Many small points of closure still remain near the crack tip, suggesting that the near-tip contact induces crack growth resistance. The effects of overloading are also discussed. 相似文献
19.
We present a numerical study of finite strain stress fields near the tip of an interface crack between a rigid substrate and
an incompressible hyperelastic solid using the finite element method (FEM). The finite element (FE) simulations make use of
a remeshing scheme to overcome mesh distortion. Analyses are carried out by assuming that the crack tip is either pinned, i.e., the elastic material is perfectly bonded (no slip) to the rigid substrate, or the crack lies on a frictionless interface. We focus on a material which hardens exponentially. To explore the effect of geometric constraint on the near
tip stress fields, simulations are carried out under plane stress and plane strain conditions. For both the frictionless interface
and the pinned crack under plane stress deformation, we found that the true stress field directly ahead of the crack tip is
dominated by the normal opening stress and the crack face opens up smoothly. This is also true for an interface crack along
a frictionless boundary in plane strain deformation. However, for a pinned interface crack under plane strain deformation,
the true opening normal stress is found to be lower than the shear stress and the transverse normal stress. Also, the crack
opening profile for a pinned crack under plane strain deformation is completely different from those seen in plane stress
and in plane strain (frictionless interface). The crack face flips over and the tip angle is almost tangential to the interface.
Our results suggest that interface friction can play a very important role in interfacial fracture of soft materials on hard
substrates. 相似文献
20.
Nuclear magnetic resonance (NMR) techniques for measuring one-dimensional absorption spectra and two-dimensional exchange spectra of solids with extremely inhomogeneously broadened lines are discussed. Among various “broad-line” solids, quasicrystals represent alloys of metallic elements, the structures of which include “forbidden” symmetry elements. NMR absorption lines of quasicrystals exhibit a strong electric-quadrupole-induced inhomogeneous broadening that originates from the lack of translational periodicity of the otherwise perfectly long-range-ordered quasiperiodic lattice. Recording an NMR spectrum of a quasicrystalline sample requires a magnetic field-sweep technique. The two-dimensional exchange experiment on quasicrystals can be performed on selectively excited portions of the NMR spectrum only. Due to the off-resonance effects in a selective excitation, the use of a simple three-pulse stimulated-echo exchange sequence is preferred. The27Al spectra of the Al-Pd-Mn and Al-Pd-Re families show interesting features like temperature-dependent frequency shifts and exchange effects due to atomic motion. 相似文献