Mechanistic investigations of the palladium-catalyzed aerobic oxidative kinetic resolution of secondary alcohols using (-)-sparteine

The mechanistic details of the Pd(II)/(-)-sparteine-catalyzed aerobic oxidative kinetic resolution of secondary alcohols were elucidated, and the origin of asymmetric induction was determined. Saturation kinetics were observed for rate dependence on [(-)-sparteine]. First-order rate dependencies were observed for both the Pd((-)-sparteine)Cl(2) concentration and the alcohol concentration at high and low [(-)-sparteine]. The oxidation rate was inhibited by addition of (-)-sparteine HCl. At low [(-)-sparteine], Pd-alkoxide formation is proposed to be rate limiting, while at high [(-)-sparteine], beta-hydride elimination is proposed to be rate determining. These conclusions are consistent with the measured kinetic isotope effect of k(H)/k(D) = 1.31 +/- 0.04 and a Hammett rho value of -1.41 +/- 0.15 at high [(-)-sparteine]. Calculated activation parameters agree with the change in the rate-limiting step by increasing [(-)-sparteine] with DeltaH(++) = 11.55 +/- 0.65 kcal/mol, DeltaS(++) = -24.5 +/- 2.0 eu at low [(-)-sparteine], and DeltaH(++) = 20.25 +/- 0.89 kcal/mol, DeltaS() = -5.4 +/- 2.7 eu at high [(-)-sparteine]. At high [(-)-sparteine], the selectivity is influenced by both a thermodynamic difference in the stability of the diastereomeric Pd-alkoxides formed and a kinetic beta-hydride elimination to maximize asymmetric induction. At low [(-)-sparteine], the selectivity is influenced by kinetic deprotonation, resulting in lower k(rel) values. A key, nonintuitive discovery is that (-)-sparteine plays a dual role in this oxidative kinetic resolution of secondary alcohols as a chiral ligand on palladium and as an exogenous chiral base.     

Parallel changes in non-photochemical quenching properties, photosynthesis and D1 levels at sudden, prolonged irradiance exposures in Ulva fasciata Delile

The photosynthetic response to a sudden and prolonged high irradiance exposure and following recovery at low irradiance were studied with the aim of investigating the ability to withstand and adapt to high irradiance without prior high light adaptation. When thalli of Ulva fasciata, accustomed to a low irradiance (80 micromol photons m(-2) s(-1)), were exposed to a high irradiance (1500 micromol photons m(-2) s(-1)), the D1 protein was rapidly degraded, reaching a steady-state level after 110 min. This was followed by a fast recovery when thalli were transferred to dim light. The overall ability of non-photochemical quenching of chlorophyll fluorescence decreased and levelled off at a sudden and prolonged exposure to high irradiance and followed the same trend as the D1 level with a fast recovery in dim light. Ulva had intrinsic means to acclimate rapidly to high irradiance, when non-photochemical quenching did not operate properly, by maintaining a smaller fraction of high light tolerant PSII assemblages and by maintaining a high non-photochemical quenching capacity of chlorophyll fluorescence in relation to the variable fluorescence. The overall absorption of light (400-700 nm) remained high during the period of high irradiance exposure. When Ulva were deprived of nutrients in the form of PES media the ability of non-photochemical quenching decreased at photoinhibitory conditions. The possible causes for the responses at prolonged irradiance and the mechanisms for the decrease of non-photochemical quenching are discussed, with implications for field measurements.     

α-(2-噻唑基脲基)膦酸二苯酯的合成

报道了一种简便的合成取代脲基膦酸酯的通用的新方法。在二氯甲烷中,三乙胺为缚酸剂的条件下,α-氨基膦酸二苯酯与三聚光气反应形成α-异氰酸基膦酸酯2,2不经分离,直接与2-氨基(苯并)噻唑加成得到α-(2-噻唑基脲基)膦酸二苯酯3,产率55.0%-88.9%。     

1 - 烃基异喹啉Reissert Compounds 的合成及其氢化研究

1-苄基异喹啉Reissertcompound经RaneyNi(w-2)催化氢化,分离得到二个未见报道的氢化产物,经化学和波谱分析推定其结构为:1-亚氨基-1-苄基-2-苯甲酰基-1,2-二氢异喹啉(4)和3-苯基-10b-苄基-1,10b-二氢咪唑骈[5,1-a]异喹啉(5)。据此提出了一条1-苄基异喹啉Reissertcompound高压催化氢化的途径,并对异喹啉eissertcompound高压催化氢化反应中酰基转位进行了讨论。试图以环已基溴作为烷化剂,在氢化钠条件下,与异喹啉Reissertcompound作用来制备1-环已基异喹啉Reissertcompound,结果只得到了1-氰基异喹啉,产率达75%,为制备1-氰基异喹啉提供了一个新方法。     

Synthesis and Characterization of Poly(ether amide)s Containing Phthalazinone Moieties

Soluble aromatic polyamides containing phthalazinone moieties were prepared. Those polymers were obtained from the solution polymerization of a new diacid containing phthalazinone moieties with various diamines. The new monomer, 2-(4-carboxyphenyl)-4-(4-carboxyphenoxy)phenyl-1(2H)phthalazinone(Ⅳ) was synthesized in a two-step reaction sequence. 2-(4-Cyanophenyl)-4-(4-cyanophenoxy)phenyl-1(2H)phthalazinone (Ⅲ) was prepared via the condensation reaction of 4-(4-hydroxyphenyl)-1(2H)phthalazinone (Ⅰ) with p-chlorobenzonitrile (Ⅱ). After (Ⅲ) was hydrolyzed, (Ⅳ) was acquired. The synthesized polyamides were characterized by means of viscosimetry, DSC, FT-IR, 1H NMR and EA. The polyamides have a high glass transition temperature which can be as high as 316 ℃. The polyamides also have good solubilities in some organic solvents.     

Novel stereoselective synthesis of functionalized oxazolidinones from chiral aziridines

Enantiomerically pure N-(R)-alpha-methylbenzyl-4(R)-(chloromethyl)oxazolidinones (4R)-5a-k were synthesized in one step and high yields from various aziridine-2-methanols (S)-2a-k by intramolecular cyclization with phosgene. The alpha-methylbenzyl substituent on the nitrogen was easily cleaved to give both enanatiomers of 4-(chloromethyl)oxazolidinones (R)-7a and (S)-7a. (R)-7a was used for the efficient syntheses of (L)-homophenylalaninol analogues (S)-12a-j. We also applied the same methodology to prepare oxazolidinones 9a-c containing a heteroatom-substituted alkyl group at C-4 in high yields.     

3-(2-二唑啉基)-色酮类化合物的合成研究

报道了取代的邻羟基苯乙酮(1a～1e)经Vilsmeier-Haack反应一步制得3-醛基色酮(2a～2e),2a～2e与取代的芳酰肼(3a～3c)缩合制得15个酰腙类化合物(4a～4o),4a～4o在醋酸酐作用下关环得15个3-(2-苝二唑啉基)-色酮(5a～5o),并通过元素分析,IR,~1H NMR和MS诺数据确证了上述化合物的结构。     

Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine

A bio-mimic bulk acoustic wave (BAW) sensor was fabricated by coating the caffeine (CAF) template molecular imprinting polymer (MIP). This sensor exhibited high selectivity and a sensitive mass response to CAF. The response range of the sensor was between 5.0 x 10(-9) and 1.0 x 10(-4) M with a detection limit of 5.0 x 10(-9) M at pH 8.0. Recoveries were 96.1-105.6%. Influencing factors were investigated in detail and optimized. When employed to detect real samples, the proposed method proved to be a convenient method with the advantages of high sensitivity, good selectivity and ease of handling.     

(S)-(+)-姜黄烯的立体选择性全合成

利用不对称双羟化反应和Raney镍的原位还原,高对映选择性和高产率地实现了(S)-(+)-α-姜黄烯(1)的立体选择性合成.用MsCl保护化合物7a和7b时,发现了有趣的消除和重排反应,得到对应的二烯化合物8.     

Characterization of UV-curable Poly(ethylene glycol)Diacrylate Based Hydrogels

Poly(ethylene glycol) diacrylate/polyvinyl alcohol(PEGDA/PVA) hydrogels were prepared from PEGDA and PVA as precurors by means of single UV radiation(UV ra.), UV radiation followed by high energy electron beam irradiation(Irra.), UV radiation followed by freeze-thawing(FT) or UV ra. and Irra. followed by FT, respectively. 2-Hydroxy-1-[4-(hydroxyethoxy)phenyl]-2-methyl-1-propanone(Irgacure 2959) was used as a photoinitiator. The effects of the various methods on the swelling and mechanical properties of the hydrogels were investigated. The results show that hydrogels made by UV ra. plus high energy electron beam irradiation followed by FT showed a higher crosslinking density and a larger tensile strength than those made by the other methods.     

电感耦合等离子体质谱(ICP-MS)法测定高钨基体样品中稀土元素的含量

准确测定钨矿和钨酸盐晶体等高钨基体样品中稀土元素的含量有助于开展矿床地球化学特征研究及钨酸盐激光晶体材料的制备和性质研究。在高钨基体样品电感耦合等离子体质谱法（ICP-MS）分析时,为了考察高钨及高含量阳离子等基体组成对分析结果的影响,实验针对Na2WO4、CaWO4、NaY(WO4)2、MnWO4和(Fe,Mn)WO4等高钨基体样品,采用硝酸和氢氟酸高压密闭消解,加入稀土元素并用2% HNO3溶液稀释定容配制成稀土元素浓度为1 ng·g-1的基体匹配标准溶液;同时,直接用2% HNO3溶液配制稀土元素浓度相同的非基体匹配标准溶液以对比系统考察两种基体溶液中稀土元素的相对灵敏度系数（RSC）差异。结果显示,基体匹配溶液与2% HNO3溶液中稀土元素的RSC相对偏差基本小于15%,表明基体效应的影响可以忽略不计。进而,为了准确测定常见高钨基体样品中稀土元素的含量,实验建立了基于ICP-MS的高钨基体样品中稀土元素准确定量分析方法,该方法线性关系好（R2 ? 0.9997）,检出限低（0.5 ~ 27.9 pg·g-1）,准确度理想（相对误差-6.25 ~ 10.74%）。采用该方法测定了钨酸钙单晶实际样品中稀土元素的含量并将其与基体匹配法的测定结果进行比对,结果显示两者相对偏差为0.80 ~ 12.75%,说明本文所建立的分析方法可靠,能用于定量测定高钨基体样品中稀土元素的含量。     

Study of photopolymers. XXXIV. Etherification and esterification reactions of polymers with (o,m, or p)-bromomethylnitrobenzene using the DBU method and the photochemical properties of the resulting polymers

Poly[4-(4-nitrobenzyloxy)styrene] was synthesized with a high degree of etherification by the reaction of poly(4-hydroxystyrene) (PHST) with p-bromomethylnitrobenzene (p-BMNB) using 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU) in hexamethylphosphoramide (HMPA). Poly[4-(3-nitrobenzyloxy)styrene] and poly[4-(2-nitrobenzyloxy)styrene] were also prepared with a high degree of etherification by the corresponding reaction with m- or o-BMNBs. However, the degrees of etherification of PHST with these BMNBs were relatively low when the reactions were carried out in other aprotic polar solvents such as DMF, DMSO, and N-methyl-2-pyrrolidone. On the other hand, poly(4-introbenzyl methacrylate) (PPNBMA), poly(3-nitrobenzyl methacrylate) (PMNBMA), and poly(2-nitrobenzyl methacrylate) (PONBMA) were synthesized with a high degree of esterification by the reaction of poly(methacrylic acid) with the corresponding BMNBs using DBU in DMSO at 30°C. The photochemical properties of the resulting poly(nitrobenzyl methacrylate)s were examined, and it was found that the rates of photodecomposition of PPNBMA and PMNBMA were promoted by the addition of tributylamine and trifluoromethanesulfonic acid, respectively. However, the rate of photodecomposition of PONBMA was not affected by addition of the base or the acid.     

Determination of N-desmethyl- and N-bisdesmethyl metabolites of Sibutramine in doping control analysis using liquid chromatography-tandem mass spectrometry

Since January 2006, the list of prohibited substances established by the World Anti-Doping Agency includes the antidepressant / anti-obesity drug Sibutramine. Due to its rapid degradation to its active metabolites N-desmethyl and N-bisdesmethyl Sibutramine, reference compounds were synthesized and included into an existing screening assay to allow the unambiguous determination of these metabolic products in human urine using liquid-liquid extraction followed by liquid chromatography/tandem mass spectrometry. Characteristic product ions, obtained after electrospray ionization and collision-induced dissociation, were elucidated using high resolution/high accuracy mass measurements with a hybrid linear ion trap/orbitrap mass analyzer. Based on diagnostic product ions, the extended screening procedure was validated for both Sibutramine metabolites using a triple quadrupole mass spectrometer. Items such as lower limits of detection (6-40 ng mL(-1)), recoveries (39-42%), intraday precision (low: 5.5-10.6%, medium: 4.9-5.9%), high: 12.8-16.4%) and interday precision (low: 15.0-22.8%, medium: 17.7-18.6%), high: 16.5-25.6%) were evaluated, and a clinical spot urine sample was analyzed to demonstrate the applicability of the developed assay in sports drug testing.     

Supercapacitors based on self-assembled graphene organogel

Self-assembled graphene organogel (SGO) with 3-dimensional (3D) macrostructure was prepared by solvothermal reduction of a graphene oxide (GO) dispersion in propylene carbonate (PC). This SGO was used as an electrode material for fabricating supercapacitors with a PC electrolyte. The supercapacitor can be operated in a wide voltage range of 0-3 V and exhibits a high specific capacitance of 140 F g(-1) at a discharge current density of 1 A g(-1). Furthermore, it can still keep a specific capacitance of 90 F g(-1) at a high current density of 30 A g(-1). The maximum energy density of the SGO based supercapacitor was tested to be 43.5 Wh kg(-1), and this value is higher than those of the graphene based supercapacitors with aqueous or PC electrolytes reported previously. Furthermore, at a high discharge current density of 30 A g(-1), the energy and power densities of the supercapacitor were measured to be 15.4 Wh kg(-1) and 16,300 W kg(-1), respectively. These results indicate that the supercapacitor has a high specific capacitance and power density, and excellent rate capability.     

Cross coupling reactions of organozinc iodides with solid-supported electrophiles: synthesis of 4-substituted benzoic and 3-substituted (E)- and (Z)-propenoic acids and amides

The solid-supported iodobenzoic acid derivatives 8-10 were coupled with a range of organozinc reagents 1-4 under palladium(o) catalysis. The coupled products released by acidic cleavage with TFA were obtained in high purities after recrystallisation. Analogous coupling of solid-supported (E)- and (Z)-3-iodoacrylic acids 18a, 18b, 19 and 20 gave (E)- and (Z)-alpha,beta-unsaturated acids and amides 21-27 stereospecifically.     

Combined application of macroporous resin and high speed counter-current chromatography for preparative separation of three flavonoid triglycosides from the leaves of Actinidia valvata Dunn

In this paper, the combined techniques of macroporous resin column chromatography and high speed counter-current chromatography were applied for preparative separation of flavonoid triglycosides from the leaves of Actinidia valvata Dunn, a famous Chinese medicinal herb. Twelve kinds of macroporous resins were investigated by adsorption and desorption tests. HPD-300 resin showed the maximum effectiveness and thus was selected for the first cleaning-up, in which 20% ethanol was used to remove the undesired constituents and 60% ethanol to elute the targets. The crude extract was then purified by high speed counter-current chromatography with the solvent system composed of ethyl acetate-n-butanol-water (2:1:3 and 4:1:5, v/v). Three flavonoid triglycosides, namely, kaempferol 3-O-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranosyl-(1→6)-β-D-galactopyranoside, kaempferol 3-O-α-L-rhamnopyranosyl-(1→3)-(4-O-acetyl-α-L-rhamnopyranosyl)-(1→6)-β-D-galactopyranoside and kaempferol 3-O-α-L-rhamnopyranosyl-(1→3)-(2,4-di-O-acetyl-α-L-rhamnopyranosyl)-(1→6)-β-D-galactopyranoside, were obtained. The purities of the separated compounds were all over 95% as determined by HPLC area normalization method. Their chemical structures were confirmed by UV, MS, NMR, and the standards.     

Acetylation and Debromination of Sydnones Accelerated by Ultrasound

In the presence of a catalytic amount of 60% perchloric acid, 4-acetyl-3-substituted sydnones were obtained more conveniently with greater yields by the sonochemical reaction of 3-substituted sydnone with acetic anhydride. Some 4-acetylsydnones which are difficult to synthesize by a known process were obtained in 17-68% yields. 4-Bromo-3-(bromoaryl)sydnones with activated zinc powder dispersed in methanol were debrominated regioselectively by ultrasound in high yields (60-96%). 3-(2′-/4′-Amino-3′,5′-dibromophenyl)sydnone is synthesized easily from 3-(2′/4′-aminophenyl)sydnone by reduction, bromination and debromination subsequently.     

Stereoselective preparation of (E)- and (Z)-alpha-fluorostilbenes via palladium-catalyzed cross-coupling reaction of high E/Z ratio and (Z)-1-bromo-1-fluoroalkenes

A highly stereoselective method to prepare both (E)- and (Z)-alpha-fluorostilbenes is described. 1-Bromo-1-fluoroalkenes (E/Z approximately 1:1), a readily available starting material, isomerizes to high E/Z ratios by storage at -20 degrees C or by photolysis at 254 nm. Stille coupling between these high E/Z 1-bromo-1-fluoroalkenes and aryl stannanes gave (Z)-alpha-fluorostilbenes in high stereoselectivity. (Z)-1-Bromo-1-fluoroalkenes, which were kinetically separated from 1-bromo-1-fluoroalkenes (E/Z approximately 1:1), can participate in Suzuki coupling reactions to give (E)-alpha-fluorostilbenes stereoselectively.     

Wide temperature range (T = 295 K and 770-1305 K) study of the kinetics of the reactions HCO + NO and HCO + NO2 using frequency modulation spectroscopy

The rate constants for , HCO + NO --> HNO + CO, and , HCO + NO(2)--> products, have been measured at temperatures between 770 K < T < 1305 K behind reflected shock waves and, for the purpose of a consistency check, in a slow flow reactor at room temperature. HCO radicals were generated by 193 nm excimer laser photolysis of diluted gas mixtures containing glyoxal, (CHO)(2), and NO or NO(2) in argon and were monitored using frequency modulation (FM) absorption spectroscopy. Kinetic simulations based on a comprehensive reaction mechanism showed that the rate constants for the title reactions could be sensitively extracted from the measured HCO profiles. The determined high temperature rate constants are k(1)(769-1307 K) = (7.1 +/- 2.7) x 10(12) cm(3) mol(-1) s(-1) and k(2)(804-1186 K) = (3.3 +/- 1.8) x 10(13) cm(3) mol(-1) s(-1). The room temperature values were found to be in very good agreement with existing literature data and show that both reactions are essentially temperature independent. The weak temperature dependence of can be explained by the interplay of a dominating direct abstraction pathway and a complex-forming mechanism. Both pathways yield the products HNO + CO. In contrast to , no evidence for a significant contribution of a direct high temperature abstraction channel was found for . Here, the observed temperature independent overall rate constant can be described by a complex-forming mechanism with several product channels. Detailed information on the strongly temperature dependent channel branching ratios is provided. Moreover, the high temperature rate constant of , OH + (CHO)(2), has been determined to be k(7) approximately 1.1 x 10(13) cm(3) mol(-1) s(-1).     

Synthesis and characterization of luminescent organic-inorganic hybrid nanocomposite from polyhedral oligomeric silsesquioxane

<正>A novel polyhedral oligomeric silsesquioxane(POSS)-based organic-inorganic hybrid nanocomposite(EF-POSS) was prepared by Pt-catalyzed hydrosilylation reaction of octahydridosilsesquioxane(T_8H_8,POSS) with a luminescent substituted acetylene(2- ethynyl-7-(4-(4-methylstyryl)styryl)-9,9-dioctyl-9H-fluorene(EF)) in high yield.The hybrid nanocomposite was soluble in common solvents such as CH_2Cl_2,CHCl_3,THF and 1,4-dioxane.Its structure and property were characterized by FTIR, NMR,TGA,UV and PL,respectively.The results show that the hybrid nanocomposite with high thermal stability emits stable blue light as a result of photo excitation and possesses high photoluminescence quantum efficiency(φ_(FL)).