Parahydrogen-Induced Radio Amplification by Stimulated Emission of Radiation

Radio amplification by stimulated emission of radiation (RASER) was recently discovered in a low-field NMR spectrometer incorporating a highly specialized radio-frequency resonator, where a high degree of proton-spin polarization was achieved by reversible parahydrogen exchange. RASER activity, which results from the coherent coupling between the nuclear spins and the inductive detector, can overcome the limits of frequency resolution in NMR. Here we show that this phenomenon is not limited to low magnetic fields or the use of resonators with high-quality factors. We use a commercial bench-top 1.4 T NMR spectrometer in conjunction with pairwise parahydrogen addition producing proton-hyperpolarized molecules in the Earth's magnetic field (ALTADENA condition) or in a high magnetic field (PASADENA condition) to induce RASER without any radio-frequency excitation pulses. The results demonstrate that RASER activity can be observed on virtually any NMR spectrometer and measures most of the important NMR parameters with high precision.     

Parahydrogen‐Induced Radio Amplification by Stimulated Emission of Radiation

Radio amplification by stimulated emission of radiation (RASER) was recently discovered in a low‐field NMR spectrometer incorporating a highly specialized radio‐frequency resonator, where a high degree of proton‐spin polarization was achieved by reversible parahydrogen exchange. RASER activity, which results from the coherent coupling between the nuclear spins and the inductive detector, can overcome the limits of frequency resolution in NMR. Here we show that this phenomenon is not limited to low magnetic fields or the use of resonators with high‐quality factors. We use a commercial bench‐top 1.4 T NMR spectrometer in conjunction with pairwise parahydrogen addition producing proton‐hyperpolarized molecules in the Earth's magnetic field (ALTADENA condition) or in a high magnetic field (PASADENA condition) to induce RASER without any radio‐frequency excitation pulses. The results demonstrate that RASER activity can be observed on virtually any NMR spectrometer and measures most of the important NMR parameters with high precision.     

Novel ion mobility setup combined with collision cell and time-of-flight mass spectrometer

An ion mobility cell of a novel type was coupled to an orthogonal injection time-of-flight (TOF) mass spectrometer. The mobility cell operates at low-pressure and contains a segmented RF ion guide providing an axial electric field that drives the ions towards the exit. A flow of gas is arranged inside the ion guide in such a way that the gas drag counteracts the force exerted by the axial field. Ions with different mobility coefficients can be scanned out of the ion guide by ramping the axial field strength. The ions can be analyzed intact or fragmented in a collision cell before introduction into an orthogonal TOF mass spectrometer. An ion source with matrix assisted laser desorption/ionization (MALDI) was attached to the instrument. The setup was evaluated for the analysis of peptide and protein mixture, with sequential fragmentation of multiple precursor ions from a protein digest and with mobility separation of fragment ions formed by in-source fragmentation of pure peptides. The mobility resolution for peptides was observed to be three times higher than the theoretical resolution predicted for a classical mobility setup with similar operating conditions (pressure, field strength, and length).     

Pivotal steps towards quantification of molecular diffusion coefficients by NMR.

Using nuclear magnetic resonance (NMR) spectroscopy with a pair of pulsed field gradients (PFGs), Stajeskal and Tanner successfully measured molecular diffusion coefficients in solution in 1965. This method has since been used extensively in various applications, especially after the PFG was implemented in commercial NMR probes. Due to the nonuniformity of the PFG and radio frequency (RF) fields, molecules distributed throughout the sample experience different PFG and RF fields and contribute unevenly to the measured diffusion coefficients, resulting in considerable errors in conventional NMR diffusion experiments. By selective excitation of a central sample region with an offset-independent adiabatic inversion pulse and a PFG, a uniform RF field can be assumed, and the PFG can be represented as a linear approximation. Under these conditions, the molecules diffuse as if they were all experiencing the same effective gradient g(e), leading to a Gaussian signal decay as a function of the PFG strength. Quantitative measurement of molecular diffusion coefficients is therefore made possible. From the diffusion coefficient of a 90 % H(2)O/10 % D(2)O sample, it is convenient to calibrate g(e) with a Java program. In a similar way the nonlinearity of the PFG can be corrected.     

Low-field 1H NMR spectroscopy: Factors impacting signal-to-noise ratio and experimental time in the context of mixed microstructure polyisoprenes

Low-cost, high-accuracy characterization of polymeric materials is critical for satisfying societal demand for high-quality materials with ultra-specific requirements. Low-field nuclear magnetic resonance (NMR) spectroscopy presents an opportunity to replace costlier or destructive methods while utilizing nondeuterated solvents. Many factors play key roles in the ability of low-field NMR spectroscopy to accurately analyze polymer systems. Sample characteristics such as polymer concentration, composition, and molecular weight all directly affect the capability of low-field spectrometers to accurately determine polymer microstructure compositions. In addition to inherent sample properties affecting instrumental accuracy, many choices concerning instrumental parameters (including number of scans, relaxation delay, spectral width, and points per scan) must be made that impact the quality of the resulting NMR spectra. In this work, we benchmark the capability of a 60-MHz low-field NMR spectrometer for analyzing polymer materials using mixed microstructure polyisoprenes as a model polymer system of interest. The aforementioned critical sample and instrumental variables are varied, and we report on the ability to quantitatively characterize polyisoprene microstructure to within 1–2% of a higher field NMR spectrometer (400 MHz). We anticipate our findings to be generally applicable to other low-field spectrometers of similar field strength and other polymer systems.     

A Mass-Selective Variable-Temperature Drift Tube Ion Mobility-Mass Spectrometer for Temperature Dependent Ion Mobility Studies

A hybrid ion mobility-mass spectrometer (IM-MS) incorporating a variable-temperature (80–400 K) drift tube is presented. The instrument utilizes an electron ionization (EI) source for fundamental small molecule studies. Ions are transferred to the IM-MS analyzer stages through a quadrupole, which can operate in either broad transmission or mass-selective mode. Ion beam modulation for the ion mobility experiment is accomplished by an electronic shutter gate. The variable-temperature ion mobility spectrometer consists of a 30.2 cm uniform field drift tube enclosed within a thermal envelope. Subambient temperatures down to 80 K are achievable through cryogenic cooling with liquid nitrogen, while elevated temperatures can be accessed through resistive heating of the envelope. Mobility separated ions are mass analyzed by an orthogonal time-of-flight (TOF) mass spectrometer. This report describes the technological considerations for operating the instrument at variable temperature, and preliminary results are presented for IM-MS analysis of several small mass ions. Specifically, mobility separations of benzene fragment ions generated by EI are used to illustrate significantly improved (greater than 50%) ion mobility resolution at low temperatures resulting from decreased diffusional broadening. Preliminary results on the separation of long-lived electronic states of Ti⁺ formed by EI of TiCl₄ and hydration reactions of Ti⁺ with residual water are presented.     

Recovering Invisible Signals by Two‐Field NMR Spectroscopy

Nuclear magnetic resonance (NMR) studies have benefited tremendously from the steady increase in the strength of magnetic fields. Spectacular improvements in both sensitivity and resolution have enabled the investigation of molecular systems of rising complexity. At very high fields, this progress may be jeopardized by line broadening, which is due to chemical exchange or relaxation by chemical shift anisotropy. In this work, we introduce a two‐field NMR spectrometer designed for both excitation and observation of nuclear spins in two distinct magnetic fields in a single experiment. NMR spectra of several small molecules as well as a protein were obtained, with two dimensions acquired at vastly different magnetic fields. Resonances of exchanging groups that are broadened beyond recognition at high field can be sharpened to narrow peaks in the low‐field dimension. Two‐field NMR spectroscopy enables the measurement of chemical shifts at optimal fields and the study of molecular systems that suffer from internal dynamics, and opens new avenues for NMR spectroscopy at very high magnetic fields.     

Three-dimensional field ion mass spectrometry

The three-dimensional atom probe (3 D-AP) is a new variant of the field ion microscope (FIM) combined with a time of flight mass spectrometer and single ion detection sensitivity (imaging atom probe). With the field ion microscope the topology of a surface, surface reactions and surface modifications can be studied in atomic detail. Using time of flight measurements, surface layers and interface layers can be chemically analyzed atom by atom and atomic layer by atomic layer. This three-dimensional atom probe permits the elemental reconstruction of a small volume of the specimen with near atomic resolution. This improvement is obtained by using the digitized video signal of the imaging atom probe detector and a separate time signal from the phosphor screen to achieve simultaneously the x and y position and the mass-to-charge ratio of individual ions striking the detector. Examples from a study on high speed steel are presented to demonstrate the usefulness of a recently built instrument.     

Systematic examination of the signal area precision of a single quadrupole enhanced low mass option (ELMO) MSQ [corrected] mass spectrometer

To examine the precision of the signal area response of an enhanced low mass option (ELMO) MSQmass spectrometer, operated in the negative electrospray ionization (ESI) mode, extended tests were performed, using flow injection analysis mass spectrometry (FIA-MS). Analytes were nitrate, nitrite, malonic acid, and D,L-mandelic acid. Composition and concentration of injected samples, application of an ASRS anion suppressor and of the cone wash unit, methanol addition to the FIA flow medium, and the voltage bias of the hexapole transfer lens were test variables. Individual test cycles comprised up to 90 injections, processed within 20 h. With a few exceptions the signal response tended to decline over time leading to a loss of more than 80% of the initial signal area in extreme cases. A hexapole radio-frequency (RF) voltage bias of -0.3 V led to an overall low detector response and to high losses of sensitivity over time. Other correlations between the insufficient signal reproducibility and FIA-MS operating conditions could not be established. The test scheme gave hints how to localize the cause of the mass spectrometer malfunction. The repetition of the test scheme after remedying the detected electronic default demonstrated that relative standard deviations less than 5% can be achieved for a sequence of 30 injections if methanol is added to the FIA flow medium and if a suppressor is used. Based on these findings a recommendation is formulated to supplement current test schemes for instrument performance verification by a detector response precision criterion.     

A DNP SPECTROMETER AT 1.94 T MAGNETIC FIELD

We describe a home-made dynamic nuclear polarizatioD (DNP) spectrometer at a fieldof 1.94 T, corresponding to Larmor frequencies 83 MHz and 54 GHz for proton and electron,respectively. Its NMR part is a modified Bruker WP--80SY spectrometer. A 6--mm EIO (ex-tended interaction oscillator) Klystron D3070, with a maximum output power of 30W in cwmode, served as the microwave source of ESR. In ~1H and ~(13)C DNP and DNP--CP (crosspolarization) experiments the probe consisted of a horn-antenna, a movable reflector and adouble-tuned circuit for ~1H and ~(13)C. The proton and carbon NMR signals were enhanced byone to two orders of magnitude for typical samples. Some results are presented in thispaper.     

Hartmann–Hahn 2D‐map to optimize the RAMP–CPMAS NMR experiment for pharmaceutical materials

Cross polarization–magic angle spinning (CPMAS) is the most used experiment for solid‐state NMR measurements in the pharmaceutical industry, with the well‐known variant RAMP–CPMAS its dominant implementation. The experimental work presented in this contribution focuses on the entangled effects of the main parameters of such an experiment. The shape of the RAMP–CP pulse has been considered as well as the contact time duration, and a particular attention also has been devoted to the radio‐frequency (RF) field inhomogeneity. ¹³ C CPMAS NMR spectra have been recorded with a systematic variation of ¹³ C and ¹H constant radiofrequency field pair values and represented as a Hartmann‐Hahn matching two‐dimensional map. Such a map yields a rational overview of the intricate optimal conditions necessary to achieve an efficient CP magnetization transfer. The map also highlights the effects of sweeping the RF by the RAMP–CP pulse on the number of Hartmann–Hahn matches crossed and how RF field inhomogeneity helps in increasing the CP efficiency by using a larger fraction of the sample. In the light of the results, strategies for optimal RAMP–CPMAS measurements are suggested, which lead to a much higher efficiency than constant amplitude CP experiment. Copyright © 2012 John Wiley & Sons, Ltd.     

Heteronuclear dipolar decoupling in liquid‐crystal NMR using supercycled SWf‐TPPM sequences

Heteronuclear dipolar decoupling is an essential requirement for extracting structural information from the ¹³C NMR spectra of liquid crystals. Efficient schemes for heteronuclear dipolar decoupling in such systems are formulated here by supercycling SW_f‐TPPM, a sequence introduced recently for this purpose in rotating solids. These sequences are compared with two other commonly used decoupling schemes in liquid‐crystal NMR, SPINAL‐64 and SW_f‐TPPM, by analyzing the intensities of various resonances in the proton decoupled ¹³C spectrum of the liquid‐crystal 4‐n‐pentyl‐4′‐cyanobiphenyl (5CB). The effectiveness of the decoupling programs with respect to experimental parameters such as RF field strength, decoupler offset frequency and phase angle is also presented. Copyright © 2010 John Wiley & Sons, Ltd.     

Inside Cover: Parahydrogen-Induced Carbon-13 Radiofrequency Amplification by Stimulated Emission of Radiation (Angew. Chem. Int. Ed. 5/2023)

The feasibility of Carbon-13 Radiofrequency (RF) Amplification by Stimulated Emission of Radiation (C-13 RASER) is demonstrated on a bolus of liquid hyperpolarized ethyl [1-¹³C]acetate. Hyperpolarized ethyl [1-¹³C]acetate was prepared via pairwise addition of parahydrogen to vinyl [1-¹³C]acetate and polarization transfer from nascent parahydrogen-derived protons to the carbon-13 nucleus via magnetic field cycling yielding C-13 nuclear spin polarization of approximately 6 %. RASER signals were detected from samples with concentration ranging from 0.12 to 1 M concentration using a non-cryogenic 1.4T NMR spectrometer equipped with a radio-frequency detection coil with a quality factor (Q) of 32 without any modifications. C-13 RASER signals were observed for several minutes on a single bolus of hyperpolarized substrate to achieve 21 mHz NMR linewidths. The feasibility of creating long-lasting C-13 RASER on biomolecular carriers opens a wide range of new opportunities for the rapidly expanding field of C-13 magnetic resonance hyperpolarization.     

Fragment Screening and Fast Micromolar Detection on a Benchtop NMR Spectrometer Boosted by Photoinduced Hyperpolarization

Fragment-based drug design is a well-established strategy for rational drug design, with nuclear magnetic resonance (NMR) on high-field spectrometers as the method of reference for screening and hit validation. However, high-field NMR spectrometers are not only expensive, but require specialized maintenance, dedicated space, and depend on liquid helium cooling which became critical over the recurring global helium shortages. We propose an alternative to high-field NMR screening by applying the recently developed approach of fragment screening by photoinduced hyperpolarized NMR on a cryogen-free 80 MHz benchtop NMR spectrometer yielding signal enhancements of up to three orders in magnitude. It is demonstrated that it is possible to discover new hits and kick-off drug design using a benchtop NMR spectrometer at low micromolar concentrations of both protein and ligand. The approach presented performs at higher speed than state-of-the-art high-field NMR approaches while exhibiting a limit of detection in the nanomolar range. Photoinduced hyperpolarization is known to be inexpensive and simple to be implemented, which aligns greatly with the philosophy of benchtop NMR spectrometers. These findings open the way for the use of benchtop NMR in near-physiological conditions for drug design and further life science applications.     

A capacitively coupled temperature‐jump arrangement for high‐resolution biomolecular NMR

A simple design for performing rapid temperature jumps within a high‐resolution nuclear magnetic resonance (NMR) setting is presented and exemplified. The design is based on mounting, around a conventional NMR glass tube, an inductive radiofrequency (RF) irradiation coil that is suitably tuned by a resonant circuit and is driven by one of the NMR's console high‐power RF amplifiers. The electric fields generated by this coil's thin metal strips can lead to a fast and efficient heating of the sample, amounting to temperature jumps of ≈ 20 °C in well within a second—particularly in the presence of lossy dielectric media like those provided by physiological buffers. Moreover, when wound around a 4‐mm NMR tube, the resulting device fits a conventional 5‐mm inverse probe and is wholly compatible with the field homogeneities and sensitivities expected for high‐resolution biomolecular NMR conditions. The performance characteristics of this new system were tested using saline solutions, as well as on a lyotropic liquid crystal capable of undergoing nematic → isotropic transitions in the neighborhood of ambient temperature. These settings were then incorporated into the performance of a new kind of single‐scan 2D NMR spectroscopy acquisition, correlating the anisotropic and isotropic patterns elicited by solutes dissolved in such liquid‐crystalline systems, before and after a sudden temperature jump occurring during an intervening mixing period. Copyright © 2010 John Wiley & Sons, Ltd.     

NMR crystallography of zeolites: refinement of an NMR-solved crystal structure using ab initio calculations of 29Si chemical shift tensors

An NMR structure refinement method for the NMR crystallography of zeolites is presented and demonstrated to give an NMR-determined crystal structure for the zeolite Sigma-2 that is in very good agreement with the single-crystal X-ray diffraction structure. The Si coordinates of the zeolite framework were solved from 29Si double-quantum NMR data obtained at a low magnetic field strength (7.0 T) and the Si and O coordinates were subsequently refined using the principal components of 29Si chemical shift tensors experimentally measured at an ultrahigh-field (21.1 T) and calculated using ab initio quantum chemical methods.     

Performance of new 400‐MHz HTS power‐driven magnet NMR technology on typical pharmaceutical API,cinacalcet HCl

After years towards higher field strength magnets, nuclear magnetic resonance (NMR) technology in commercial instruments in the past decade has expanded at low and high magnetic fields to take advantage of new opportunities. At lower field strengths, permanent magnets are well established, whereas for midrange and high field, developments utilize superconducting magnets cooled with cryogenic liquids. Recently, the desire to locate NMR spectrometers in nontypical NMR laboratories has created interest in the development of cryogen‐free magnets. These magnets require no cryogenic maintenance, eliminating routine filling and large cryogen dewars in the facility. Risks of spontaneous quenches and safety concerns when working with cryogenic liquids are eliminated. The highest field commercially available cryogen‐free NMR magnet previously reported was at 4.7 T in 2013. Here we tested a prototype cryogen‐free 9.4‐T power‐driven high‐temperature‐superconducting (HTS) magnet mated to commercial NMR spectrometer electronics. We chose cinacalcet HCl, a typical active pharmaceutical ingredient, to evaluate its performance towards structure elucidation. Satisfactory standard 1D and 2D homonuclear and heteronuclear NMR results were obtained and compared with those from a standard 9.4‐T cryogenically cooled superconducting NMR instrument. The results were similar between both systems with minor differences. Further comparison with different shims and probes in the HTS magnet system confirmed that the magnet homogeneity profile could be matched with commercially available NMR equipment for optimal results. We conclude that HTS magnet technology works well providing results comparable with those of standard instruments, leading us to investigate additional applications for this magnet technology outside a traditional NMR facility.     

Rapid Chemical Reaction Monitoring by Digital Microfluidics‐NMR: Proof of Principle Towards an Automated Synthetic Discovery Platform

Microcoil nuclear magnetic resonance (NMR) has been interfaced with digital microfluidics (DMF) and is applied to monitor organic reactions in organic solvents as a proof of concept. DMF permits droplets to be moved and mixed inside the NMR spectrometer to initiate reactions while using sub‐microliter volumes of reagent, opening up the potential to follow the reactions of scarce or expensive reagents. By setting up the spectrometer shims on a reagent droplet, data acquisition can be started immediately upon droplet mixing and is only limited by the rate at which NMR data can be collected, allowing the monitoring of fast reactions. Here we report a cyclohexene carbonate hydrolysis in dimethylformamide and a Knoevenagel condensation in methanol/water. This is to our knowledge the first time rapid organic reactions in organic solvents have been monitored by high field DMF‐NMR. The study represents a key first step towards larger DMF‐NMR arrays that could in future serve as discovery platforms, where computer controlled DMF automates mixing/titration of chemical libraries and NMR is used to study the structures formed and kinetics in real time.     

ArtTAX - a new mobile spectrometer for energy-dispersive micro X-ray fluorescence spectrometry on art and archaeological objects

A newly developed spectrometer for energy-dispersive micro X-ray fluorescence spectrometry has been designed for the demands of archaeometry. ArtTAX combines the advantages of non-destructive and sensitive multi-elemental analysis at sub-mm resolution with the possibility of working outside the laboratory. The spectrometer consists of an air-cooled, low-power molybdenum tube, new generation polycapillary X-ray optics, a silicon drift detector without the need for liquid-nitrogen cooling, a CCD camera, and three light diodes for sample positioning. The motor-driven measurement head is fixed on a x,y,z-flexible tripod support which can be assembled and dismantled within minutes. The spot size of the primary X-ray beam was determined to be 94 microm for the Cu(Kalpha) energy, the detection limits are in a range of a few tens of microg g(-1) for the medium energy-range in glass. Additional open helium purging in the excitation and detection paths enables the determination of elements down to sodium, thus avoiding vacuum conditions or a size-limiting sample chamber. A selection of qualitative and quantitative results on pigment, metal, glass, and enamel analyses are presented to show the potential of ArtTAX in the field of art and archaeology.     

Rapid Determination of Explosives and Narcotics Using a Multicapillary-Column Gas Chromatograph and an Ion-Mobility Spectrometer

A gas chromatograph for the rapid determination of explosives (2,4-dinitrotoluene, 2,4,6-trinitrotoluene, and pentaerythritol tetranitrate) and narcotics (heroin, cocaine hydrochloride, and crack) is described, and its analytical characteristics are presented. The instrument was equipped with a multicapillary column and an ion-mobility spectrometer as a detector.