A Supramolecular Polymer Network of Graphene Quantum Dots

Graphene quantum dot (GQD)–organic hybrid compounds (GQD‐ 2 b – e ) were prepared by introducing 3,4,5‐tri(hexadecyloxy)benzyl groups (C16) and linear chains terminated with a 2‐ureido‐4‐[1H]‐pyrimidinone (UPy) moiety onto the periphery of GQD‐ 1 . GQD‐ 2 b – e formed supramolecular assemblies through hydrogen bonding between the UPy units. GPC analysis showed that GQDs with high loadings of the UPy group formed larger assemblies, and this trend was confirmed by DOSY and viscosity measurements. AFM images showed the polymeric network structures of GQD‐ 2 e on mica with flat structures (ca. 1.1 nm in height), but no such structures were observed in GQD‐ 2 a , which only carries the C16 group. GQD‐ 2 c and GQD‐ 2 d formed organogels in n‐decanol, and the gelation properties can be altered by replacing the alkyl chains in the UPy group with ethylene glycol chains (GQD‐ 3 ). GQD can thus be used as a platform for supramolecular polymers and organogelators by suitable chemical functionalization.     

Self-Assembly of Semiconductor Quantum Dots using Organic Templates

Colloidal semiconductor nanocrystals, known as quantum dots (QDs), are regarded as brightly photoluminescent nanomaterials possessing outstanding photophysical properties, such as high photodurability and tunable absorption and emission wavelengths. Therefore, QDs have great potential for a wide range of applications, such as in photoluminescent materials, biosensors and photovoltaic devices. Since the development of synthetic methods for accessing high-quality QDs with uniform morphology and size, various types of QDs have been designed and synthesized, and their photophysical properties dispersed in solutions and at the single QD level have been reported in detail. In contrast to dispersed QDs, the photophysical properties of assembled QDs have not been revealed, although the structures of the self-assemblies are closely related to the device performance of the solid-state QDs. Therefore, creating and controlling the self-assembly of QDs into well-defined nanostructures is crucial but remains challenging. In this Minireview, we discuss the notable examples of assembled QDs such as dimers, trimers and extended QD assemblies achieved using organic templates. This Minireview should facilitate future advancements in materials science related to the assembled QDs.     

用于生物标记的半导体量子点研究

半导体量子点的独特光学性质使之成为理想的荧光探针材料,在生物医学领域具有广阔的应用前景.本文评述了目前量子点合成、表面修饰、结合生物分子的方法,以及半导体量子点在生物标记应用中相对于传统有机染料的优点.     

Colloidally Stable CdS Quantum Dots in Water with Electrostatically Stabilized Weak-Binding,Sulfur-Free Ligands

Colloidal quantum dot (QD) photocatalysts have the electrochemical and optical properties to be highly effective for a range of redox reactions. QDs are proven photo-redox catalysts for a variety of reactions in organic solvents but are less prominent for aqueous reactions. Aqueous QD photocatalysts require hydrophilic ligand shells that provide long-term colloidal stability but are not so tight-binding as to prevent catalytic substrates from accessing the QD surface. Common thiolate ligands, which also poison many co-catalysts and undergo photo-oxidative desorption, are therefore often not an option. This paper describes a framework for the design of water-solubilizing ligands that are in dynamic exchange on and off the QD surface, but still provide long-term colloidal stability to CdS QDs. The binding affinity and inter-ligand electrostatic interactions of a bifunctional ligand, aminoethyl phosphonic acid (AEP), are tuned with the pH of the dispersion. The key to colloidal stability is electrostatic stabilization of the monolayer. This work demonstrates a means of mimicking the stabilizing power of a thiolate-bound ligand with a zwitterionic tail group, but without the thiolate binding group.     

Analytical Applications of Enzymatic Growth of Quantum Dots

We have developed an analytical assay to detect the enzymatic activity of acetylcholine esterase and alkaline phosphatase based on the generation of quantum dots by enzymatic products. Acetylcholine esterase converts acetylthiocholine into thiocholine. The latter enhances the rate of decomposition of sodium thiosulfate into H₂S, which in the presence of cadmium sulfate yields CdS quantum dots showing a time dependent exponential growth, typical of autocatalytic processes. This assay was also applied to detect acetylcholine esterase inhibitors. Alkaline phosphatase hydrolyzes thiophosphate and yields H₂S, which instantly reacts with Cd²⁺ to give CdS quantum dots. The formation of CdS quantum dots in both reactions was followed by fluorescence spectroscopy and showed dependence on the concentration of enzyme and substrate.     

半导体荧光量子点标记技术

生命体系中化学、生物信息的活体、原位、实时、动态和高灵敏获取,是当前生命科学研究中迫切需要解决的关键问题之一,发展相关的新技术与新方法至关重要。半导体荧光量子点因其优异的荧光特性可望在解决此类难题中发挥重要作用而日益受到关注。本文将根据我们课题组多年来的研究工作经验,就半导体荧光量子点标记技术的相关基础问题、在生物医学领域中的应用以及发展前景等做简要评述。     

从量子点的角度审视碳点的研究进展

碳点不仅具有类似于传统量子点的强发光和小尺寸特性,还表现出传统量子点无法比拟的水相分散性和生物相容性等优势.作为量子点领域的一个新兴分支,碳点的结构、合成化学和光电性质与传统量子点显著不同,也为量子点的发展提供了新的机遇和挑战.随着碳点领域的迅速发展和不断深化,越来越有必要在一些基本概念上与传统量子点比较,并从传统量子点的角度澄清碳点的独特特征和关键挑战.本综述主要聚焦于基本结构、合成化学、光学性质和应用研究等四个方面,从传统量子点基础概念的角度来重新审视碳点领域的研究进展和挑战.     

Optically Matched Semiconductor Quantum Dots Improve Photophosphorylation Performed by Chloroplasts

A natural–artificial hybrid system was constructed to enhance photophosphorylation. The system comprises chloroplasts modified with optically matched quantum dots (chloroplast–QD) with a large Stokes shift. The QDs possess a unique optical property and transform ultraviolet light into available and highly effective red light for use by chloroplasts. This favorable feature enables photosystem II contained within the hybrid system to split more water and produce more protons than chloroplasts would otherwise do on their own. Consequently, a larger proton gradient is generated and photophosphorylation is improved. At optimal efficiency activity increased by up to 2.3 times compared to pristine chloroplasts. Importantly, the degree of overlap between emission of the QDs and absorption of chloroplasts exerts a strong influence on the photophosphorylation efficiency. The chloroplast–QD hybrid presents an efficient solar energy conversion route, which involves a rational combination of a natural system and an artificial light‐harvesting nanomaterial.     

Visible-Light-Mediated Oxidative Amidation of Aldehydes by Using Magnetic CdS Quantum Dots as a Photocatalyst

A magnetic CdS quantum dot (Fe₃O₄/polydopamine (PDA)/CdS) was synthesized through a facile and convenient method from inexpensive starting materials. Characterization of the prepared catalyst was performed by means of FTIR spectroscopy, XRD, SEM, TEM, energy-dispersive X-ray spectroscopy, and vibrating-sample magnetometer techniques. Fe₃O₄/PDA/CdS was found to be a highly active photocatalyst for the amidation of aromatic aldehydes by using air as a clean oxidant under mild conditions. The photocatalyst can be recovered by magnetic separation and successfully reused for five cycles without considerable loss of its catalytic activity.     

Electrochemistry in Carbon‐based Quantum Dots

Electrochemistry belongs to an important branch of chemistry that deals with the chemical changes produced by electricity and the production of electricity by chemical changes. Therefore, it can not only act a powerful tool for materials synthesis, but also offer an effective platform for sensing and catalysis. As extraordinary zero‐dimensional materials, carbon‐based quantum dots (CQDs) have been attracting tremendous attention due to their excellent properties such as good chemical stability, environmental friendliness, nontoxicity and abundant resources. Compared with the traditional methods for the preparation of CQDs, electrochemical (EC) methods offer advantages of simple instrumentation, mild reaction conditions, low cost and mass production. In return, CQDs could provide cost‐effective, environmentally friendly, biocompatible, stable and easily‐functionalizable probes, modifiers and catalysts for EC sensing. However, no specific review has been presented to systematically summarize both aspects until now. In this review, the EC preparation methods of CQDs are critically discussed focusing on CQDs. We further emphasize the applications of CQDs in EC sensors, electrocatalysis, biofuel cells and EC flexible devices. This review will further the experimental and theoretical understanding of the challenges and future prospective in this field, open new directions on exploring new advanced CQDs in EC to meet the high demands in diverse applications.     

Non‐Blinking Semiconductor Colloidal Quantum Dots for Biology,Optoelectronics and Quantum Optics

Twinkle, twinkle: The blinking of semiconductor colloidal nanocrystals is the main inconvenience of these bright nanoemitters. There are various approaches for obtaining non‐blinking nanocrystals, one of which is to grow a thick coat of CdS on the CdSe core (see picture). Applications of this method in the fields of optoelectronic devices, biologic labelling and quantum information processing are discussed.

     

High Sensibility of Quantum Dots to Metal Ions Inspired by Hydroxyapatite Microbeads

An approach for the sensitive and selective determination of Ag⁺, Cu²⁺ and Hg²⁺ ions was developed based on the fluorescence quenching of mercaptopropionic acid (MPA) capped CdTe quantum dots in the existence of hydroxyapatite (HAP) nanoribbon spherulites. Among various metal ions investigated, it was found that the fluorescence of CdTe QDs was only sensitive to Ag⁺, Cu²⁺ and Hg²⁺ ions. The addition of HAP into the CdTe system could bring forward a sensitivity improvement of about 1 to 2 orders of magnitude in the detection of Ag⁺ and Cu²⁺ compared with the plain CdTe system without the existence of HAP; while there was no sensitization effect for Hg²⁺. Under optimal conditions, the detection limits for Ag⁺, Cu²⁺ and Hg²⁺ were 20, 56 and 3.0 nmol·L^?1, respectively, and the linear ranges were 0.02–50, 0.056–54 and 0.003–2.4 µmol·L^?1, respectively. Mechanisms of both QDs fluorescence quenching by metal ions and the sensitization effect by HAP were also discussed.     

CdS Quantum Dots as Fluorescence Probes for Detection of Adriamycin Hydrochloride

IntroductionQuantum dots(QDs) have generated a great dealof interest because of their quantum confinement andsurface properties, which make possible the absorptionand emission of size-tuned QDs, thereby resulting inlarge Stokes shifts[1,2]. Because of the…     

Colloidal Quantum Dot Arrangement Assisted by Perylene Bisimide Self-Assembly

Colloidal semiconductor nanocrystals, so-called quantum dots (QDs), are attractive as molecular-like smart nanomaterials, and their emission and optoelectronic properties in the dispersed state have been actively studied. The construction of supramolecular structures composed of multiple QDs, however, is still challenging. Here, a new strategy to form supramolecular QD structures via self-assembly of perylene bisimide (PBI) dyes is demonstrated. In a mixed solution, QDs and PBI undergo time-dependent fusion to form an isolated colloidal QD-PBI complex or a unique QD-PBI co-aggregate composed of QDs arranged along a sheet-like PBI nanostructure, and these dramatically different supramolecular structures can be controlled by the solvent polarity.     

Synthesis of Black Phosphorus Quantum Dots with High Quantum Yield by Pulsed Laser Ablation for Cell Bioimaging

Black phosphorus quantum dots (BPQDs), with an average diameter of about 6 nm and a height of about 1.1 nm, are successfully synthesized by means of a pulsed laser ablation (PLA) method in isopropyl ether (IPE) solvent. The photoluminescence PL quantum yield of the as‐prepared sample is as high as 20.7 %, which is 3 times that of BPQDs prepared by means of probe ultrasonic exfoliation (approximately 7.2 %). The stable and blue–violet PL emission of the BPQDs is observed. It can be elucidated that electrons transit from the LUMO energy level to the HOMO energy level, as well as energy levels below the HOMO (H1 and H2). In addition, BPQDs are also utilized in bioimaging in HeLa cells, showing an intense and stable PL signal and excellent biocompatibility. Hence, this work indicates that the obtained BPQDs with high quantum yield and stable PL emission have great potential for biomedical applications, including biolabeling, bioimaging, and drug delivery.     

Research Update of Emergent Sulfur Quantum Dots in Synthesis and Sensing/Bioimaging Applications

Due to their unique optical property, low toxicity, high hydrophilicity, and low cost, sulfur quantum dots (SQDs), an emerging luminescent nanomaterial, have shown great potential in various application fields, such as sensing, bioimaging, light emitting diode, catalysis, and anti-bacteria. This minireview updates the synthetic methods and sensing/bioimaging applications of SQDs in the last few years, followed by discussion of the potential challenges and prospects in their synthesis and sensing/bioimaging applications, with the purpose to provide some useful information for researchers in this field.     

Self-Organization of PbS into Quantum Dots Superlattices

Orderedcolloidsor"colloidalcrystals",whichhavelong-rangespatialordef,havebeeninvestigatedextensively,andstillremainanactiveareaofresearchI.Selforganizationisageneralphenomenonofcolloidaldispersionswherecontroloverparticlesizeandstabilizationhasbeenachieved.Selforganizationrequiresonlyahard-sphererepulsion,acontro1ledsizedistribution,theinherentVanderWaaIsattractionbetWeenparticles,andameansofgentlydestabilizingthedispersion.Theinherenttendencyformonodisperselyophobiccolloidstoselforganizepro…