Interaction of similarly charged surfaces mediated by nanoparticles

We study the interaction between two like charged surfaces embedded in a solution of oppositely charged multivalent rod-like counterions.The counterions consist of two rigidly bonded point charges,each of valency Z.The strength of the electrostatic coupling increases with increasing surface charge density or valency of the charges.The system is analyzed by employing a self-consistent field theory,which treats the short and long range interactions of the counterions within different approximations.We find that in the weak coupling limit,the interactions are only repulsive.In the intermediate coupling regime,the multivalent rod-like counterions can mediate attractive interactions between the surfaces. For sufficiently long rods,bridging contributes to the attractive interaction.In the strong coupling limit,the charge correlations can contribute to the attractive interactions at short separations between the charged surfaces.Two minima can then appear in the force curve between surfaces.     

Control of multivalent interactions by binding epitope density

Receptor clustering by multivalent ligands can activate signaling pathways. In principle, multivalent ligand features can control clustering and the downstream signals that result, but the influence of ligand structure on these processes is incompletely understood. Using a series of synthetic polymers that vary systematically, we studied the influence of multivalent ligand binding epitope density on the clustering of a model receptor, concanavalin A (Con A). We analyze three aspects of receptor clustering: the stoichiometry of the complex, rate of cluster formation, and receptor proximity. Our experiments reveal that the density of binding sites on a multivalent ligand strongly influences each of these parameters. In general, high binding epitope density results in greater numbers of receptors bound per polymer, faster rates of clustering, and reduced inter-receptor distances. Ligands with low binding epitope density, however, are the most efficient on a binding epitope basis. Our results provide insight into the design of ligands for controlling receptor-receptor interactions and can be used to illuminate mechanisms by which natural multivalent displays function.     

Fabrication of Oligomeric Avidin Scaffolds for Valency‐Controlled Surface Display of Functional Ligands

Multivalent surface display of biomolecules is crucial to study and utilize multivalent biological interactions. However, precise valency control of surface‐displayed ligands remains extremely difficult. Now a series of new oligomeric avidin proteins were fabricated that allow facile control of surface multivalency of biotinylated ligands. Naturally dimeric rhizavidin (RA) was engineered to form a mixture of oligomeric avidin assemblies, and discrete RA oligomers from the dimer to octamer of RA, were homogeneously prepared. These oligomeric avidins are in polygonal forms with expected numbers of stable biotin binding sites. Upon immobilization on low‐density biotin‐coated gold surfaces, RA dimer, trimer, and tetramer scaffolds provided accurate mean residual valencies of 2, 3, and 4, respectively, for biotinylated proteins. Valency‐controlled display of antibody binding protein G on these RA surfaces showed clear valency‐dependent enhancement of antibody capturing stability.     

Influencing receptor-ligand binding mechanisms with multivalent ligand architecture

Multivalent ligands can function as inhibitors or effectors of biological processes. Potent inhibitory activity can arise from the high functional affinities of multivalent ligand-receptor interactions. Effector functions, however, are influenced not only by apparent affinities but also by alternate factors, including the ability of a ligand to cluster receptors. Little is known about the molecular features of a multivalent ligand that determine whether it will function as an inhibitor or effector. We envisioned that, by altering multivalent ligand architecture, ligands with preferences for different binding mechanisms would be generated. To this end, a series of 28 ligands possessing structural diversity was synthesized. This series provides the means to explore the effects of ligand architecture on the inhibition and clustering of a model protein, the lectin concanavalin A (Con A). The structural parameters that were varied include scaffold shape, size, valency, and density of binding elements. We found that ligands with certain architectures are effective inhibitors, but others mediate receptor clustering. Specifically, high molecular weight, polydisperse polyvalent ligands are effective inhibitors of Con A binding, whereas linear oligomeric ligands generated by the ring-opening metathesis polymerization have structural properties that favor clustering. The shape of a multivalent ligand also influences specific aspects of receptor clustering. These include the rate at which the receptor is clustered, the number of receptors in the clusters, and the average interreceptor distance. Our results indicate that the architecture of a multivalent ligand is a key parameter in determining its activity as an inhibitor or effector. Diversity-oriented syntheses of multivalent ligands coupled with effective assays that can be used to compare the contributions of different binding parameters may afford ligands that function by specific mechanisms.     

Architectural and structural optimization of the protective polymer layer for enhanced targeting

Using Monte Carlo simulations we study the influence of ligand architecture (valence, branching length) and structure (polydispersity) of a flat protective polymer layer on the accessibility of its functional groups and efficiency of receptor targeting. Two types of receptor surfaces were considered: the surface homogeneously covered with receptors and the surface containing a finite number of receptor sites. We found that multivalent ligands provide a larger density of targeting groups on the periphery of the layer compared to monovalent ligands for the same overall number of targeting groups per polymer layer. Because of their cooperativity in binding, multivalent ligands were also considerably more efficient in binding to both types of receptor surfaces. With an increase of ligand valence the number of functional groups attached to receptors noticeably increases. Short-branched divalent ligands show an especially high cooperativity in binding to closely packed receptors. However, in the case of immobile receptors separated by a finite distance from each other, the average distance between the functional groups belonging to the same short divalent ligand is too small to reach different receptors simultaneously and the receptor binding is less efficient than in the monovalent ligand case. Using a bidisperse protective polymer layer formed by short nonfunctional polymers and long functionalized polymers considerably increases the fraction of functional groups on the periphery of the layer. Simulations of receptor binding confirm the high efficiency of receptor targeting by bidisperse polymer layers, which is achieved by means of larger compressibility and higher capability of the ligands to reach out compared to the corresponding monodisperse layers. The concepts of multivalent ligands and a bidisperse protective polymer layer each have their own advantages which can be combined for an enhanced targeting effect.     

Protein adsorption in porous adsorbent particles: A multiscale modeling study on inner radial humps in the concentration profiles of adsorbed protein induced by nonuniform ligand density distributions

Recently published results determined from molecular dynamics (MD) modeling and simulation studies have shown that the spatial distribution of the density of immobilized charged ligands in ion‐exchange porous adsorbent particles is most likely nonuniform and the adsorbent particles also exhibit local nonelectroneutrality. In this work, the functional forms of the nonuniform spatial distributions of the density of the immobilized ligands in four different porous adsorbent media that were determined by MD studies were employed in a macroscopic continuum model describing the transport and adsorption of a single protein in the porous particles of the four different adsorbent media. The results clearly show that inner radial humps in the concentration profiles of the adsorbed protein can occur when the spatial distribution of the density of the immobilized ligands in the porous adsorbent particles is nonuniform and also has local maxima or minima along the radial direction in the particle. The results also indicate that the rate at which the equilibrium condition is approached depends significantly on the functional form of the spatial distribution of the density of the immobilized ligands. When adsorption equilibrium has been reached, the concentration profile of the adsorbed protein exhibits the shape of the spatial distribution of the density of the immobilized ligands. The results suggest that the technique of confocal scanning laser microscopy could be used to measure the concentration profile of an adsorbed protein at equilibrium and this measurement could provide the spatial distribution of the density of the immobilized ligands, and such measurements could also be used for quality control of the adsorbent medium. The results in this work have also implications in the modeling, design, analysis, and quality control of systems involving biocatalysis. Furthermore, the results clearly indicate that it is very important to study the dynamic behavior of an adsorption system having a nonuniform spatial distribution in the density of the immobilized charged ligands and where (i) both monovalent and multivalent interactions between the single charged adsorbate and the immobilized charged ligands occur and (ii) the values of the pH and ionic strength are such that the electrophoretic effects are active.     

Multivalent Sialosides: A Tool to Explore the Role of Sialic Acids in Biological Processes

Sialic acids (Sias) are fascinating nine‐carbon monosaccharides that are primarily found on the terminus of the oligosaccharide chains of glycoproteins and glycolipids on cell surfaces. These Sias undergo a variety of structural modifications at their hydroxy and amine positions, thereby resulting in structural diversity and, hence, coordinating a variety of biological processes. However, deciphering the structural functions of such interactions is highly challenging, because the monovalent binding of Sias is extremely weak. Over the last decade, several multivalent Sia ligands have been synthesized to modulate their binding affinity with proteins/lectins. In this Minireview, we highlight recent developments in the synthesis of multivalent Sia probes and their potential applications. We will discuss four key multivalent families, that is, polymers, dendrimers, liposomes, and nanoparticles, and will emphasize the major parameters that are essential for the specific interactions of these molecules with proteins in biological systems.     

Multivalency in supramolecular chemistry and nanofabrication

Multivalency is a powerful and versatile self-assembly pathway that confers unique thermodynamic and kinetic behavior onto supramolecular complexes. The diversity of the examples of supramolecular multivalent systems discussed in this perspective shows that the concept of multivalency is a general phenomenon, and that any supramolecular interaction can be employed in multivalent displays to attain the attractive aspects characteristic of multivalent interactions. After a general introduction reviewing the general aspects of multivalency, a number of different supramolecular multivalent complexes are discussed that highlight the different features of multivalent interactions. In contrast to the many biochemical multivalent interactions, supramolecular multivalent interactions are ideal to attain a quantitative and fundamental understanding of multivalency. Several examples in which multivalency has been utilized in supramolecular nanofabrication schemes are described in detail.     

On-bead synthesis and binding assay of chemoselectively template-assembled multivalent neoglycopeptides

The investigation of recognition events between carbohydrates and proteins, especially the control of how spatial factors and binding avidity are correlated in, remains a great interest for glycomics. Therefore, the development of efficient methods for the rapid evaluation of new ligands such as multivalent glycoconjugates is essential for diverse diagnostic or therapeutic applications. In this paper we describe the synthesis of chemoselectively-assembled multivalent neoglycopeptides and the subsequent recognition assay on a solid support. Aminooxylated carbohydrates (betaLac-ONH(2) 4, alphaGalNAc-ONH(2) 9 and alphaMan-ONH(2) 13) have been prepared as carbohydrate-based recognition elements and assembled as clusters onto a cyclopeptidic scaffold by an oxime-based strategy in solid phase. Further binding tests between lectins and beads of resin derivatized with neoglycopeptides displaying clustered lactoses, N-acetylgalactoses and mannoses (18-20) have shown specific recognition and enhanced affinity through multivalent interactions, suggesting that the local density of carbohydrate-based ligands at the bead surface is crucial to improve the interaction of proteins of weak binding affinity. This solid phase strategy involving both molecular assembly and biological screening provides a rapid and efficient tool for various applications in glycomics.     

The Effect of Ligand Mobility on the Cellular Interaction of Multivalent Nanoparticles

Multivalent nanoparticle binding to cells can be of picomolar avidity making such interactions almost as intense as those seen with antibodies. However, reducing nanoparticle design exclusively to avidity optimization by the choice of ligand and its surface density does not sufficiently account for controlling and understanding cell–particle interactions. Cell uptake, for example, is of paramount significance for a plethora of biomedical applications and does not exclusively depend on the intensity of multivalency. In this study, it is shown that the mobility of ligands tethered to particle surfaces has a substantial impact on particle fate upon binding. Nanoparticles carrying angiotensin‐II tethered to highly mobile 5 kDa long poly(ethylene glycol) (PEG) chains separated by ligand‐free 2 kDa short PEG chains show a superior accumulation in angiotensin‐II receptor type 1 positive cells. In contrast, when ligand mobility is constrained by densely packing the nanoparticle surface with 5 kDa PEG chains only, cell uptake decreases by 50%. Remarkably, irrespective of ligand mobility and density both particle types have similar EC50 values in the 1–3 × 10^?9 m range. These findings demonstrate that ligand mobility on the nanoparticle corona is an indispensable attribute to be considered in particle design to achieve optimal cell uptake via multivalent interactions.     

Direct Measurement of Through-Bond Effects in Molecular Multivalent Interactions

Multivalent interactions occur throughout biology, and have a number of characteristics that monovalent interactions do not. However, it remains challenging to directly measure the binding force of molecular multivalent interactions and identify the mechanism of interactions. In this study, the specific interaction between bivalent aptamer and thrombin has been measured directly and quantitatively by force-induced remnant magnetization spectroscopy to investigate the binding force and through-bond effects of the multivalent interactions. The measured differential binding forces enable through-bond effects in thrombin–aptamer complexes to be identified, where aptamer binding at exosite II produces visible effects on their binding at exosite I and vice versa. This method might be suitable for practical applications in the design of high-performance ligands.     

Ligand accessibility to receptor binding sites enhanced by movable polyrotaxanes

Functionalized polyrotaxanes are utilized to investigate the relation to multivalent interactions between the mannose moiety and Con A immobilized surfaces. According to the results of SPR spectroscopy, the mannose-conjugated polyrotaxanes show a higher response than any other mannose conjugate on both surfaces of high- and low-density Con A. Moreover, the results of the FRET analysis suggest that the mobility of α-cyclodextrins in the polyrotaxane more efficiently contributes to their binding interactions in a multivalent manner. This well-defined polyrotaxane system provides control over ligand density, ligand mobility, and gives an efficient response to the biological interaction receptor, which has not been easy to achieve in covalently bound polymeric systems.     

Molecular printboards: versatile platforms for the creation and positioning of supramolecular assemblies and materials

This tutorial review describes the development of molecular printboards, which are tailor-made surfaces functionalized with receptor (host) molecules. Such substrates can be used for the binding of complementary ligand (guest) molecules through multivalent interactions. Supramolecular multivalent interactions are ideal to attain a quantitative and fundamental understanding of multivalency at interfaces. Because of their quantitative interpretation, the focus is on (i) the interaction of cyclodextrin host surfaces with multivalent hydrophobic guest molecules, (ii) the vancomycin-oligopeptide system, and (iii) the multivalent binding of histidine-tagged proteins to NiNTA receptor surfaces. The review will be of interest to researchers in the fields of supramolecular chemistry, chemical biology, surface chemistry, and molecular recognition.     

Designing Multivalent Ligands to Control Biological Interactions: From Vaccines and Cellular Effectors to Targeted Drug Delivery

Multivalent interactions in which multiple ligands on one object bind to multiple receptors on another are commonly found in natural biological systems. In addition, these interactions can lead to increased strength and selectivity when compared to the corresponding monovalent interaction. These attributes have also guided the design of synthetic multivalent ligands to control biological interactions. This review will highlight the recent literature describing the use of multivalent ligand display in the design of vaccines, immunomodulators, cell signaling effectors, and vehicles for targeted drug delivery.     

Promotion of sugar-lectin recognition through the multiple sugar presentation offered by regioselectively addressable functionalized templates (RAFT): a QCM-D and SPR study

The investigation of recognition events between carbohydrates and proteins, especially the understanding of how spatial factors and binding avidity are correlated, remains a great interest for glycobiology. In this context we have investigated by nanogravimetry (QCM-D) and surface plasmon resonance (SPR), the kinetics and thermodynamics of the interaction between concanavalin A (Con A) and various neoglycopeptide ligands of low molecular weight. Regioselectively addressable functionalized templates (RAFT) have been used as scaffolds for the design of multivalent neoglycopeptides bearing thiol or biotin functions for their anchoring on transducer surfaces. Although these multivalent neoglycopeptide ligands cannot span multiple binding sites within the same Con A protein, they have increased activities relative to their monovalent counterpart. Our results emphasize that the multivalent RAFT ligands function by clustering several lectins, which leads to enhanced affinities.     

Multivalent interactions between lectins and supramolecular complexes: Galectin-1 and self-assembled pseudopolyrotaxanes

Supramolecular chemistry has been employed to develop flexible and adaptable multivalent neoglycoconjugates for binding galectin-1 (Gal-1). Gal-1, a dimeric lectin with two galactoside-binding sites, regulates cancer progression and immune responses. Self-assembled pseudopolyrotaxanes consisting of lactoside-displaying cyclodextrin (LCD) "beads" threaded onto polyviologen "strings" display mobile ligands as a result of cyclodextrin rotation about, and limited translation along, the polymer chain. The pseudopolyrotaxanes rapidly and efficiently precipitate Gal-1 and provide valency-corrected enhancements of up to 30-fold compared to native lactose and 20-fold over free LCD in a T-cell agglutination assay. A supramolecular statistical effect was observed, wherein the efficacy of Gal-1 inhibition correlates with the number of ligands connected to each other solely through mechanical and noncovalent interactions. Such flexible and adaptable self-assembled pseudopolyrotaxanes show promise for the study of multivalent interactions and targeting of therapeutically relevant lectins.     

Tuning chemotactic responses with synthetic multivalent ligands

BACKGROUND: Multivalent ligands have been used previously to investigate the role of ligand valency and receptor clustering in eliciting biological responses. Studies of multivalent ligand function, however, typically have employed divalent ligands or ligands of undefined valency. How cells respond to multivalent ligands of distinct valencies, which can cluster a signaling receptor to different extents, has never been examined. The chemoreceptors, which mediate chemotactic responses in bacteria, are localized, and clustering has been proposed to play a role in their function. Using multivalent ligands directed at the chemoreceptors, we hypothesized that we could exploit ligand valency to control receptor occupation and clustering and, ultimately, the cellular response. RESULTS: To investigate the effects of ligand valency on the bacterial chemotactic response, we generated a series of linear multivalent arrays with distinct valencies by ring-opening metathesis polymerization. We report that these synthetic ligands elicit bacterial chemotaxis in both Escherichia coli and Bacillus subtilis. The chemotactic response depended on the valency of the ligand; the response of the bacteria can be altered by varying chemoattractant ligand valency. Significantly, these differences in chemotactic responses were related to the ability of the multivalent ligands to cluster chemoreceptors at the plasma membrane. CONCLUSIONS: Our results demonstrate that ligand valency can be used to tune the chemotactic responses of bacteria. This mode of regulation may arise from changes in receptor occupation or changes in receptor clustering or both. Our data implicate changes in receptor clustering as one important mechanism for altering cellular responses. Given the diverse events modulated by changes in the spatial proximity of cell surface receptors, our results suggest a general strategy for tuning biological responses.     

Interactions between nonpolar surfaces coated with the nonionic surfactant hexaoxyethylene dodecyl ether C12E6 and the origin of surface charges at the air/water interface

The interactions between nonpolar surfaces coated with the nonionic surfactant hexaoxyethylene dodecyl ether C12E6 were investigated using two techniques and three different types of surfaces. As nonpolar surfaces, the air/water interface, silanated negatively charged glass, and thiolated uncharged gold surfaces were chosen. The interactions between the air/water interfaces were measured with a thin film pressure balance in terms of disjoining pressure as a function of film thickness. The interactions between the solid/liquid interfaces were determined using a bimorph surface force apparatus. The influence of the nature of the surface on the interaction forces was investigated at surfactant concentrations below and above the cmc. The adsorption of the nonionic surfactant on the uncharged thiolated surface does not, as expected, lead to any buildup of a surface charge. On the other hand, adsorption of C12E6 on the charged silanated glass and the charged air/water interface results in a lowering of the surface charge density. The reduction of the surface charge density on the silanated glass surfaces is rationalized by changes in the dielectric permittivity around the charged silanol groups. The reason for the surface charge observed at the air/water interface as well as its decrease with increasing surfactant concentration is discussed and a new mechanism for generation of OH- ions at this particular interface is proposed.     

From phage display to dendrimer display: insights into multivalent binding

Phage display is widely used for the selection of target-specific peptide sequences. Presentation of phage peptides on a multivalent platform can be used to (partially) restore the binding affinity. Here, we present a detailed analysis of the effects of valency, linker choice, and receptor density on binding affinity of a multivalent architecture, using streptavidin (SA) as model multivalent receptor. For surfaces with low receptor densities, the SA binding affinity of multivalent dendritic phage peptide constructs increases over 2 orders of magnitude over the monovalent species (e.g., K(d,mono) = 120 μM vs K(d,tetra) = 1 μM), consistent with previous work. However, the affinity of the SA-binding phage presenting the exact same peptides was 16 pM when dense receptor surfaces used for initial phage display were used in assays. The phage affinity for SA-coated surfaces weakens severely toward the nanomolar regime when surface density of SA is decreased. A similarly strong dependence in this respect was observed for dendritic phage analogues. When presented with a dense SA-coated surface, dendrimer display affords up to a 10(4)-fold gain in affinity over the monovalent peptide. The interplay between ligand valency and receptor density is a fundamental aspect of multivalent targeting strategies in biological systems. The perspective offered here suggests that in vivo targeting schemes might best be served to conduct ligand selection under physiologically relevant receptor density surfaces, either by controlling the receptor density placed at the selection surface or by using more biologically relevant intact cells and tissues.     

Host-Guest Systems on the Surface of Functionalized Superparamagnetic Iron Oxide Nanoparticles (SPIONs) Utilizing Hamilton Receptors and Cyanurate Derivative Molecules

The study of hydrogen bonding interactions at the level of functionalized nanoparticles remains highly challenging and poorly explored area. In this work, superparamagnetic iron oxide nanoparticles (SPIONs) were orthogonally functionalized using receptors bearing multiple hydrogen bonding motifs. Pristine SPIONs were modified by wet chemical processes with Hamilton receptors (hosts), or cyanurate-guest molecules linked to phosphonic acid moieties for monolayer functionalization. The modified surfaces were fully characterized and the number of attached ligands on the surface were determined. The host-guest interactions on the interface of modified SPIONs were investigated by using UV-Vis spectroscopic titrations. Functionalized SPIONs demonstrated two to three magnitudes stronger binding affinities as compared to the related molecular interactions in solution due to synergistic effects on complex surface environment. Higher supramolecular binding ratios of host-guest interactions on the modified surface were emerged. These studies provide fundamental insights into supramolecular complexations on the surface at solid-liquid interface systems with applications in engineered nanomaterials, nano-sensing devices, and drug delivery systems.