软骨藻酸作用蛋白质的亲和毛细管电泳筛选

基于亲和毛细管电泳,定性比较了血浆、肠道及细胞线粒体中所选的9种重要功能蛋白质与神经毒性生物毒素--软骨藻酸(domoic acid, DA)的相互作用。以DA淌度比变化量 Δ M与蛋白质浓度L作图,根据斜率值大小可比较DA与蛋白质作用的相对强弱。结果如下:可与DA相互作用的有6种蛋白质,作用强弱为:人凝血酶 > 细胞色素C≈胰蛋白酶≈免疫球蛋白E (Ig E) ≈核糖核酸酶A > λ 核酸外切酶;而铁蛋白、转铁蛋白、凝集素与DA未表现出相互作用和亲和力。实验表明,亲和毛细管电泳具有高效、快速、所需样品量低的优点,可用于DA作用靶蛋白的筛选,为DA的毒性机制研究和毒性防护提供基础信息。     

Rapid separation of protein isoforms by capillary zone electrophoresis with new dynamic coatings

Many cellular functions are regulated through protein isoforms. Changes in the expression level or regulatory dysfunctions of isoforms often lead to developmental or pathological disorders. Isoforms are traditionally analyzed using techniques such as gel- or capillary-based isoelectric focusing. However, with proper electro-osmotic flow (EOF) control, isoforms with small pI differences can also be analyzed using capillary zone electrophoresis (CZE). Here we demonstrate the ability to quickly resolve isoforms of three model proteins (bovine serum albumin, transferrin, alpha1-antitrypsin) in capillaries coated with novel dynamic coatings. The coatings allow reproducible EOF modulation in the cathodal direction to a level of 10(-9) m2V(-1)s(-1). They also appear to inhibit protein adsorption to the capillary wall, making the isoform separations highly reproducible both in peak areas and apparent mobility. Isoforms of transferrin and alpha1-antitrypsin have been implicated in several human diseases. By coupling the CZE isoform separation with standard affinity capture assays, it may be possible to develop a cost-effective analytical platform for clinical diagnostics.     

Affinity capillary electrophoresis and quantum mechanical calculations applied to the investigation of hexaarylbenzene-based receptor binding with lithium ion

In this study, two complementary approaches, affinity capillary electrophoresis (ACE) and quantum mechanical density functional theory (DFT) calculations, have been employed for quantitative characterization and structure elucidation of the complex between hexaarylbenzene (HAB)‐based receptor R and lithium ion Li⁺. First, by means of ACE, the apparent binding constant of Li R ⁺ complex (K) in methanol was determined from the dependence of the effective electrophoretic mobilities of Li R ⁺ complex on the concentration of lithium ions in the 25 mM Tris/50 mM chloroacetate background electrolyte (BGE) using non‐linear regression analysis. Prior to regression analysis, the effective electrophoretic mobilities of the Li R ⁺ complex were corrected to reference temperature 25°C and constant ionic strength 25 mM. The apparent binding constant of the Li R ⁺ complex in the above methanolic BGE was evaluated as logK = 1.15±0.09. Second, the most probable structures of nonhydrated Li R ⁺ and hydrated Li R ⁺·3H₂O complexes were derived by DFT calculations. The optimized structure of the hydrated Li R ⁺·3H₂O complex was found to be more realistic than the nonhydrated Li R ⁺ complex because of the considerably higher binding energy of Li R ⁺·3H₂O complex (500.4 kJ/mol) as compared with Li R ⁺ complex (427.5 kJ/mol).     

Affinity capillary electrophoresis and fluorescence spectroscopy for studying enantioselective interactions between omeprazole enantiomer and human serum albumin

Baseline separation of omeprazole (OME) enantiomers was achieved by affinity capillary electrophoresis (ACE), using human serum albumin (HSA) as the chiral selector. The influence of several experimental variables such as HSA concentration, the type and content of organic modifiers, applied voltage and running buffer concentration on the separation was evaluated. The binding of esomeprazole (S‐omeprazole, S‐OME) and its R‐enantiomer (R‐omeprazole, R‐OME) to HSA under simulated physiological conditions was studied by ACE and fluorescence spectroscopy which was considered as a reference method. ACE studies demonstrated that the binding constants of the two enantiomers and HSA were 3.18 × 10³ M⁻¹ and 5.36 × 10³ M⁻¹, respectively. The binding properties including the fluorescence quenching mechanisms, binding constants, binding sites and the number of binding sites were obtained by fluorescence spectroscopy. Though the ACE method could not get enough data when compared with the fluorescence spectrum method, the separation and binding studies of chiral drugs could be achieved simultaneously via this method. This study is of great significance for the investigation and clinical application of chiral drugs.     

Immunoaffinity chromatographic isolation of prostate-specific antigen from seminal plasma for capillary electrophoresis analysis of its isoforms

Prostate-specific antigen (PSA) concentration in serum has been the biomarker employed for prostate cancer diagnosis in the last two decades. However, new more specific biomarkers allowing a better differentiation of cancer from non-malignant prostate diseases are necessary. Glycosylation of PSA gives rise to different forms of the protein which can be separated into several isoforms by analytical techniques, such as CE. Because PSA glycosylation is influenced by pathological conditions, the CE pattern of PSA isoforms could be different in prostate cancer than in non-malignant prostate diseases. To study this CE pattern of PSA, prior purification of the protein from the biological fluid is mandatory. In this study an immunoaffinity chromatography method which allows PSA purification without altering the CE pattern is developed. An in-house prepared column produced with commercial anti-PSA antibodies is employed. The use of 1 M propionic acid as elution agent provides higher than 40% recovery of high purity PSA. CE analysis of PSA immunopurified from seminal plasma of a healthy individual shows the same 8 peaks as the commercially available PSA standard. Sample preparation only requires dilution with phosphate buffered saline prior to immunoaffinity purification. High repeatability for the sample preparation step was achieved (RSD% for percentage of corrected peak area in the range 0.6–5.3 for CE analysis of three independently purified seminal plasma aliquots compared to range 0.8–4.9 for a given aliquot analyzed three times by CE). IAC of five microliters seminal plasma provided enough PSA to achieve signal/noise ratio larger than 5 for the smallest CE isoforms.     

Affinity capillary electrophoresis and isothermal titration calorimetry for the determination of fatty acid binding with beta-cyclodextrin

Affinity capillary electrophoresis (ACE) and isothermal titration calorimetry (ITC) were used to investigate the binding interaction between several fatty acids (FAs) and beta-cyclodextrin (beta-CD). Within each method, steps taken to obtain accurate binding constants are discussed. The stoichiometry of interaction was revealed to be 1:1 regardless of FA chain length. The binding constants obtained using ACE were: octanoate, 6.4x10(2); 2-octenoate, 4.7x10(2); decanoate, 3.7x10(3); 9-decenoate, 1.8x10(3) and dodecanote, 1.4x10(4). The binding constants obtained from ITC were of the same order of magnitude, but were consistently greater than those from ACE. Thermodynamic data obtained using ITC are used to explain the observed trends in binding strength.     

Poly(dimethylsiloxane) microchip capillary electrophoresis with electrochemical detection for rapid measurement of acetaminophen and its hydrolysate

Poly(dimethylsiloxane) microchip capillary electrophoresis with amperometric detection has been used for rapid separation and determination of acetaminophen and its hydrolysate, i.e. p-aminophenol. A Pt ultramicroelectrode with a diameter of 10 m positioned at the outlet of the separation channel was used as a working electrode for amperometric detection. Factors influencing separation and detection were investigated and optimized. Results show that acetaminophen and p-aminophenol can be well separated within 35 s with RSD<1% for migration time and <7% for detection current for both analytes. Detection limits for both analytes are estimated to be 5.0 mol L^–1 (approximately 0.1 fmol) at S/N=3. This method has been successfully applied to the detection of traces of p-aminophenol in paracetamol tablets.     

Derivatization of peptides and small proteins for improved identification and detection in capillary zone electrophoresis (CZE)

Peptides and small proteins, of limited molecular weight (MW) can be derivatized with a 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (6-AQC) reagent, leading to a single capillary zone electrophoresis (CZE) peak, suggestive of a completely tagged product. The number of tags per molecule was demonstrated by matrix assisted, laser desorption, time-of-flight mass spectrometry (MALDI-TOFMS) studies. In CZE, these species have greatly improved plate count and peak shape, improved (lowered) detectabilities, and in general, improved identification properties in the CZE mode in high performance capillary electrophoresis (HPCE). The formation of what appears to be a single, homogeneously tagged product is a function of how the derivatizations are performed. Once these conditions are optimized, virtually all peptides and small proteins tested (limited MW) can form single, fully tagged products, with the desirable CZE properties. These derivatization approaches thus lead to products that perform and are detected much better in CZE than their precursors (native, untagged peptides). The determined plate counts for these tagged peptides were as high as 6 million plates/m, which was very reproducible, and 59–12,000 times higher than the untagged (native) molecules. The peak symmetry was also improved greatly. The limit of detection (LOD) of some tested 6-AQC tagged peptides were nine to 209 times improved (lower) with ultraviolet (UV) absorption detection, again as compared with that for the native species. The LOD could be further lowered via laser induced fluorescence (LIF) detection in CZE, especially when acetonitrile (ACN) containing buffers were used.     

Determination of chlorpheniramine and its binding with human serum albumin by capillary electrophoresis with tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence detection.

Tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence (ECL) detection in a capillary electrophoresis separation system was used for the determination of chlorpheniramine (CPM). The experimental conditions, such as the applied potential, separation voltage, injection voltage, injection time and the pH of the separation buffer were considered in detail. The ECL intensity showed two linear responses to CPM, i.e., from 15 microM to 1 mM and from 0.8 microM to 15 microM with a detection limit of 0.5 microM. The binding of CPM with human serum albumin was also monitored using this method and the binding constant was estimated to be 4.1 x 103 M(-1).     

高速毛细管电泳安培法检测甲巯咪唑及其制剂

采用高速毛细管电泳安培法对甲巯咪唑(TMZ)及其制剂的测定进行了研究; 通过优化检测电位、毛细管长度和内径、分离电压、缓冲溶液等实验参数, TMZ在60 s内可以得到较好的分离, 线性范围在2.00×10-3～2.80×10-5 mol/L, 检出限为3.50×10-6 mol/L; 峰面积和迁移时间的相对标准偏差分别为2.7%、 1.2% (n＝8); 该法可用于制剂中TMZ的检测.     

Lactate determination in human vitreous humour by capillary electrophoresis and time of death investigation

Forensic inquests, particularly, in assessing time since death currently recognize the importance of the analysis of vitreous humour (VH) biomarkers. Present research, studies, and validates the determination of lactate (La) in VH by CZE with indirect UV detection. The BGE (pH 8.9) consisted of Tris buffer (37 mM) containing 4-methoxybenzoic acid (4 mM) and alkyl-trimethyl-ammonium bromide (1.2 mM). Each VH specimen was diluted with a butyric acid solution (internal standard 0.057 mM) and La and butyrate were separated within 3–5 min (30 kV). The La LOQ and LOD were 4 and 2 mM, respectively. The calibration curve linearity ranged from 4 to 80 mM; intra- and interruns precisions were less than 10% for standard as well as for VH specimen, respectively. To investigate postmortem interval (PMI) and VH lactate level correlation, human VH specimens were collected during autopsy (n = 40) and stored at −20°C until assay. La levels ranged from 16 to 42 mM; PMI values ranged from 10 to 141 h. La (mM) and PMI (h) correlation was statistically significant (r² = 0.527; p < 0.05). In conclusion, the present CZE analysis is efficacious to determine VH La as a biomarker for PMI investigation.     

Affinity capillary electrophoresis applied to the studies of interactions of a member of heat shock protein family with an immunosuppressant

The bioaffinity of receptor-ligand interactions is investigated by determining the binding constant (association constant or dissociation constant) of the resulting complex utilizing affinity capillary electrophoresis (ACE). The ACE binding assay was established with a potent immunosuppressant, deoxyspergualin (DSG), that binds specifically to Hsc70, a constitutive or cognate member of heat shock protein 70 (Hsp70) family. Quantitative determination of binding constants under different running buffer systems provide comparative results. The association constants for the interaction between Hsc70 protein and DSG were found to be 5.7·10⁴ M⁻¹ in a buffer with pH 6.95 and 6.3·10⁴ M⁻¹ in a buffer with pH 5.30 (or corresponding dissociation constants, 18 and 16 μM, respectively) based on Scatchard analyses. Binding of DSG to a synthetic peptide, SINPDEAVAYGAAV-QAAILSGDK, one of the DSG-binding fragments found from tryptic digest of Hsc70 protein, provides further detailed information for the understanding of Hsc70 binding domain. The applicability of using coated capillaries was also evaluated for probing Hsc70-DSG interaction.     

Separation and identification of platinum adducts with DNA nucleotides by capillary zone electrophoresis and capillary zone electrophoresis coupled to mass spectrometry

Platinum adducts are supposed to be the cytotoxic lesions in DNA after platinum-containing anticancer therapy. Various adducts are formed upon interaction of platinum complexes with nucleotides, but contribution of individual adducts to antitumor activity and toxicity of platinum complexes still remains to be examined. A capillary zone electrophoresis (CZE) method is described that is suitable to separate individual platinum adducts. We investigated the formation of adducts following the reaction of cis-diamminedichloroplatinum (II) (cisplatin) with various DNA nucleotides. Baseline separation of unmodified and modified nucleotides (adducts) was achieved using uncoated fused-silica capillaries and basic separation buffers. In order to elucidate the observed peak pattern, a coupled CZE-electrospray ionization-mass spectrometry (ESI)-MS approach was applied. After incubation of mononucleotides with cisplatin, monochloro, monoaqua and bifunctional adduct species were detected. Consequently, the migration order of nucleotides and individual platinum adducts could be determined. Moreover, the time-dependent conversion from monochloro to monoaqua and subsequently to bifunctional adducts was monitored. In conclusion, individual platinum adducts were separated by CZE and identified by CZE-ESI-MS. Formation and conversion of distinct species were confirmed. Potential applications comprise studies of novel platinum complexes, investigations of platinum-adduct formation with DNA, and determination of platinum-DNA adducts in cells.     

Affinity capillary electrophoresis method for investigation of bile salts complexation with sulfobutyl ether‐β‐cyclodextrin

Sulfobutyl ether‐β‐cyclodextrin (SBEβCD) is utilized in preformulation and drug formulation as an excipient for solubilization of drugs with poor aqueous solubility. Approximately seven negative charges of SBEβCD play a role with respect to solubilization and complexation, but also have an influence on the ionic strength of the background electrolyte when the cyclodextrin is used in capillary electrophoresis. Mobility‐shift affinity capillary methods for investigation of the complexation of taurocholate and taurochenodeoxycholate with the negatively charged cyclodextrin derivative applying constant power and ionic strength conditions as well as constant voltage and varying ionic strength were investigated. A new approach for the correction of background electrolyte ionic strength was developed. Mobility‐shift affinity capillary electrophoresis experiments obtained at constant voltage and constant power settings were compared and found to provide binding parameters that were in good agreement upon correction. The complexation of taurochenodeoxycholate with SBEβCD was significantly stronger than the corresponding interaction involving taurocholate. The obtained stability constants for the bile salts were in the same range as those previously reported for the interaction with neutral β‐cyclodextrins derivatives, i.e. the positions of the negative charges on SBEβCD and the bile salts within the complex did not lead to significant electrostatic repulsion.     

Rapid capillary coating by epoxy-poly-(dimethylacrylamide): performance in capillary zone electrophoresis of protein and polystyrene carboxylate

A fast and simple method for the internal coating of capillaries in capillary zone electrophoresis (CZE) is that with epoxy-poly(dimethylacrylamide) (EPDMA). Duration of coating by that method is 30 min, compared with that of 24 h when using uncross-linked polyacrylamide (PA) under otherwise identical conditions. Under the conditions used for the CZE of proteins (pH 9.0, 2% polyethylene glycol), the capillary coating with EPDMA is stable for at least 50 consecutive runs as judged by the constancy of low electroosmotic flow, equalling the stability of coating achieved by PA. Protein mobilities and protein peak asymmetry (suggestive of reversible interaction with the capillary wall) are also found to be the same in EPDMA and PA coated capillaries. Differences between EPDMA and PA coating also exist: The former is unstable upon lowering the ionic strength of the buffer to 0.003, upon the addition of sodium dodecyl sulfate (SDS) to the buffer and in application to the hydrophobic analyte, polystyrene carboxylate.     

Microchip capillary electrophoresis for frontal analysis of free bilirubin and study of its interaction with human serum albumin

To meet the need for bedside monitoring of free bilirubin for neonates under critical conditions, a microfluidic chip was fabricated and tested for its coupling with CE/frontal analysis (FA) to determine free bilirubin and study of its binding interaction with HSA, which regulated its concentration in plasma. The poly(methyl methacrylate) (PMMA) multichannel chip was fabricated by CO2 laser ablation and bonded with a fused-silica separation capillary for CE/FA separation with UV detection. The chip was designed to allow a complete assay of four electrophoretic runs using preconditioned channels to speed up the determination of free bilirubin and to deliver quick results for bedside monitoring. Under optimized conditions, the linear working range for free bilirubin was from 10 to 200 micromol with RSDs from 2.1 to 5.0% for n=3, and the LOD at 9 micromol for S/N=3. From a binding study between bilirubin and HSA under FA condition, the second binding constant for bilirubin-HSA was determined as 1.07x10(5) L/mol and the number of binding sites per HSA as 3.46. The results enabled the calculation of free bilirubin for jaundiced infants based on the clinically significant level of total bilirubin, producing a range of 118.3-119.4 micromol/L. The developed method is shown to meet the clinical requirement with additional margin of protection to detect the early rising level of free bilirubin prior to jaundice condition. The low-cost microchip CE/FA device is shown to produce quick results with high potential to deliver a suitable bed-side monitoring method for bilirubin management in neonates.     

Miniaturized protein microsequencer with PTH amino acid identification by capillary electrophoresis II. A syringe-pump-based system for covalent sequencing

A miniaturized protein and peptide microsequencer consisting of a fused silica capillary reaction chamber is described. Extremely small volumes of reagents, 2 mul or less, were delivered directly to the reaction chamber through individual fused silica capillary lines using low pressure syringe pumps. Other than an argon gas controller, no values were used in the delivery system. The short flow path and very low dead volume were achieved by directly connecting the narrow-bore capillaries to the reaction chamber. This configuration minimized side reactions. The elimination of valves, as well as the use of capillaries for the reaction chamber and delivery lines, greatly simplified the construction of the sequencer. The performance of the sequencer was evaluated by sequencing 8-33 picomoles of myoglobin and insulin chain B that were covalently attached to Sequelon-DITC and Sequelon-AA membranes.     

Affinity capillary electrophoresis employed for determination of stability constants of antamanide complexes with univalent and divalent cations in methanol

Affinity capillary electrophoresis (ACE) and pressure‐assisted ACE were employed to study the noncovalent molecular interactions of antamanide (AA), cyclic decapeptide from the deadly poisonous fungus Amanita phalloides, with univalent (Li⁺, Na⁺, K⁺, and NH₄⁺) and divalent (Mg²⁺ and Ca²⁺) cations in methanol. The strength of these interactions was quantified by the apparent stability constants of the appropriate AA‐cation complexes. The stability constants were calculated using the nonlinear regression analysis of the dependence of the effective electrophoretic mobility of AA on the concentration of the above ions in the BGE (methanolic solution of 20 mM chloroacetic acid, 10 mM Tris, pH_MeOH 7.8, containing 0–50 mM concentrations of the above ions added in the form of chlorides). Prior to stability constant calculation, the AA effective mobilities measured at actual temperature inside the capillary and at variable ionic strength of the BGEs were corrected to the values corresponding to the reference temperature of 25°C and to the constant ionic strength of 10 mM. From the above ions, sodium cation interacted with AA moderately strong with the stability constant 362 ± 16 L/mol. K⁺, Mg²⁺, and Ca²⁺ cations formed with AA weak complexes with stability constants in the range 37–31 L/mol decreasing in the order K⁺ > Ca²⁺ > Mg²⁺. No interactions were observed between AA and small Li⁺ and large NH₄⁺ cations.