Catalytic effect of copper on the hexacyanoferrate(III)-cyanide redox reaction-I The uncatalysed and catalysed reactions

A kinetic study of the hexacyanoferrate(III)-cyanide redox reaction has been made in connection with development of a new catalytic method for copper. The reaction kinetics change with time from first- to second-order dependence with respect to hexacyanoferrate(III). The reaction is nearly inverse first-order with respect to hexacyanoferrate(II) and first-order with respect to cyanide. The reaction shows a strong positive primary salt effect, but a very small increase in the reaction rate with temperature is found. A parallel reaction proceeds with a first-order dependence with respect to hydroxide. A tentative mechanism is proposed for the first reaction, involving the formation of cyanogen radicals. The second reaction corresponds to the well-known decomposition of hexacyanoferrate(III) in alkaline medium. The catalysed reaction exhibits similar kinetics with respect to hexacyanoferrate(II) and (III) but is zero-order with respect to cyanide and hydroxide and first-order with respect to catalyst. The proposed mechanism involves two consecutive interactions of the hexacyanoferrate(III) with copper(I) and with copper(II) cyanide complexes respectively, followed by a 2-electron oxidation of a co-ordinatively bridging cyanide group.     

Impact of water on the OH + HOCl reaction

The effect of a single water molecule on the OH + HOCl reaction has been investigated. The naked reaction, the reaction without water, has two elementary reaction paths, depending on how the hydroxyl radical approaches the HOCl molecule. In both cases, the reaction begins with the formation of prereactive hydrogen bond complexes before the abstraction of the hydrogen by the hydroxyl radical. When water is added, the products of the reaction do not change, and the reaction becomes quite complex yielding six different reaction paths. Interestingly, a geometrical rearrangement occurs in the prereactive hydrogen bonded region, which prepares the HOCl moiety to react with the hydroxyl radical. The rate constant for the reaction without water is computed to be 2.2 × 10(-13) cm(3) molecule(-1) s(-1) at room temperature, which is in good agreement with experimental values. The reaction between ClOH···H(2)O and OH is estimated to be slower than the naked reaction by 4-5 orders of magnitude. Although, the reaction between ClOH and the H(2)O···HO complex is also predicted to be slower, it is up to 2.2 times faster than the naked reaction at altitudes below 6 km. Another intriguing finding of this work is an interesting three-body interchange reaction that can occur, that is HOCl + HO···H(2)O → HOCl···H(2)O + OH.     

On the effect of copper (II) and chloride ions on the iodate-hydrogen peroxide reaction in the presence and absence of manganese (II)

The effect of copper (II) and chloride ions on the manganese (II) catalyzed iodate-peroxide reaction has been examined with reference to the hydrogen peroxide-iodic acid-manganese (II)-organic species oscillatory reaction. The observations are considered to provide evidence for iodine dioxide as the key intermediate in the manganese (II) catalyzed reaction. Kinetic data for the copper (II) catalyzed reaction are reported.     

Water formation reaction on Pt(111): role of the proton transfer

The catalytic water formation reaction on Pt(111) was investigated by kinetic Monte Carlo simulations, where the interaction energy between reaction species and the high mobility of H(2)O molecule was considered. Results obtained clearly reproduce the scanning tunneling microscopy images which show that the reaction proceeds via traveling the reaction fronts on the O-covered Pt(111) surface by creating H(2)O islands backwards. The reaction front is a mixed layer of OH and H(2)O with a (square root 3 x square root 3)R30(o) structure. Coverage change during the reaction is also reproduced in which the reaction consists of three characteristic processes, as observed by the previous experiments. The simulation also revealed that the proton transfer from H(2)O to OH plays an important role to propagate the water formation.     

Heterogeneous interactions of calcite aerosol with sulfur dioxide and sulfur dioxide-nitric acid mixtures

The heterogeneous chemistry of sulfur dioxide with CaCO(3) (calcite) aerosol as a function of relative humidity (RH) has been studied under isolated particle conditions in an atmospheric reaction chamber using infrared absorption spectroscopy. The reaction of SO(2) with calcite produced gas phase CO(2) as a product in addition to the conversion of the particulate carbonate to sulfite. The reaction extent was found to increase with elevated RH, as has been observed for the similar reaction with HNO(3), but much higher relative humidities were needed to significantly enhance the reaction. Mixed experiments in which calcite aerosol was exposed to both HNO(3) and SO(2) were also performed. The overall reaction extent at a given relative humidity did not appear to be increased by having both reactant gases present. The role of carbonate aerosol as an atmospheric sink for sulfur dioxide and particulate nitrogen and sulfur correlations are discussed.     

馏分油浆态床加氢处理研究: II FCC柴油加氢工艺条件及动力学研究

对FCC柴油在浆态床柴油加氢催化剂SP25上的加氢工艺条件进行了优化,并考察了加氢脱硫（HDS）和加氢脱氮（HDN）动力学。结果表明,提高反应温度、提高反应压力、增加催化剂的加入量、延长反应时间都能提高催化剂的加氢精制活性,最佳的FCC柴油浆态床加氢工艺条件为,温度350℃、压力6MPa、催化剂加入量6%、反应时间2h。催化剂循环使用性能的考察结果表明,SP25催化剂具有良好的活性稳定性。动力学研究结果表明,FCC柴油的加氢脱硫反应过程可以分为两个阶段。第一阶段为较易脱除的苯并噻吩类（BTs）硫化物的加氢脱硫反应,反应活化能为70.00kJ/mol;第二阶段为较难脱除的二苯并噻吩类（DBTs）硫化物的加氢脱硫反应,反应活化能为85.65kJ/mol。FCC柴油HDN反应的活化能为79.91kJ/mol。烷基取代的二苯并噻吩类硫化物（特别是DMDBTs）是加氢精制反应中最难脱除的含杂原子（S或N）烃类化合物。     

氢原子共线交换反应的动力学计算I.Cl与HCl反应几率的振荡现象研究

我们利用超球坐标对共线Cl+HCl(V-3)→ClH(V'≤3)+Cl作了一维精确量子计算,计算所用势能面是LEPS型,Et=-3.23KJ/mol, 得到了态态反应几率等动力学信息, 通过分析结果发现, 反应是振动绝热的, 即以对角(V'-V')反应几率为主,非对角(V' V')反应几率小于0.1, 反应几率随总能量表现出强裂地振荡, 在有阱的势能面上动力学共振增强。     

Kinetic study of Berthelot reaction steps in the absence and presence of coupling reagents

Several reaction steps in the Berthelot reaction for the determination of ammonia have been separately studied. A reaction order of two has been confirmed for the reaction between HOCl and NH(3). The rate constant for this reaction has been determined to be 3.2 x 10(6)l.mole(-1).sec(-1). The first evidence for the formation of benzoquinonechlorimine is presented. Pentacyanoferrate coupling reagents which accelerate the production of indophenol have been found to operate on the reaction between NH(2)Cl and phenol. The rate constant for the final step of the reaction sequence has been determined to be 5.3 x 10(-3)l.mole(-1).sec(-1). A reaction between chlorimine and pentacyanoferrate compounds has been found to be responsible for the formation of a green product in the presence of excess of coupling reagent.     

氯甲交联基聚苯乙烯微球的氨甲基化改性及其席夫碱型螯合树脂微球的制备

以氯甲基化交联聚苯乙烯(CMCPS)微球为出发物质,首先在催化剂KI存在下,与六次甲基四胺(HMTA)进行Delepine反应,制得氨基化改性的聚苯乙烯微球AMCPS;然后再使微球AMCPS与水杨醛(SA)发生Schiff碱反应,制备了Schiff碱型螯合树脂SACPS微球,采用红外光谱法表征了其化学结构。 重点研究了CMCPS微球氨基化改性Delepine反应的影响因素,探讨了反应机理。 研究结果表明,催化剂KI对CMCPS微球表面的苄氯基团与HMTA之间的Delepine反应,具有很强的催化作用;使用极性较强的溶剂DMSO及在较高的温度(80 ℃)下反应,氯甲基转变为氨甲基的效率高;Schiff碱型螯合树脂SACPS对Cu2+离子具有良好的螯合能力。     

Rapid solid-state metathesis routes to aluminum nitride

Metathesis (exchange) reactions offer the possibility of controlling temperature through a judicious choice of precursors. Here, a reaction between AlCl(3) and Ca(3)N(2) is found to produce phase-pure aluminum nitride (AlN) in seconds. The CaCl(2) byproduct salt, whose formation drives this highly exothermic reaction, is simply washed away after reaction completion. SEM images demonstrate that the AlN product is a micron-sized powder, while TEM shows well-formed crystallites. Thermodynamic calculations indicate that a reaction temperature of 2208 K could be reached under adiabatic conditions. Using an in situ thermocouple and a stainless steel reactor vessel to hold the precursors, a reaction temperature of 1673 K is measured 0.8 s after initiation. Switching to a thermally insulating ceramic vessel produces a maximum reaction temperature of 2010 K because of the more nearly adiabatic conditions. The high reaction temperature appears to be critical to forming phase-pure AlN. Experiments with Li(3)N, instead of Ca(3)N(2), produce lower temperatures (1513 K), resulting in both Al and Al(2)O(3) impurities.     

手性双噁唑啉配体在不对称合成中的应用

双噁唑啉手性配体已广泛用于不对称Henry反应、环丙烷化反应、Aldol反应、烷基化反应、环加成反应中,并表现出很高的对映选择性和催化活性,成为最有用的手性配体之一。文章综述了近10年来双噁唑啉手性配体及高分子受载手性双噁唑啉在不对称合成中的研究进展。     

The electrochemical reaction mechanism of selenocystine on selenium-gold film modified glassy carbon electrode

A simple and selective voltammetric method based on selenium-gold film modified glassy carbon electrode has been developed for investigating electrochemical reaction mechanism of selenocystine. With N₂ saturated, redox reactions between selenocystine (SeC) and selenocysteine (SeCys) were judged to be two simple electron-transfer processes. With air saturated, the reduction reaction was diagnosed to be EC catalytic reaction (the chemical oxidation reaction of the SeCys by O₂ (C) following the electron-transfer reaction (E)) and oxidation reaction is a simple electron-transfer process. With pure O₂ saturated, only reduction peak was observed and the reaction was judged to be EC catalytic reaction. The electron-transfer numbers of redox reaction were calculated to be 2 by chronocoulometry and rotating disk electrode.     

The photo-dehydro-Diels-Alder (PDDA) reaction

The photo-dehydro-Diels-Alder (PDDA) reaction is a valuable extension of the classical Diels-Alder (DA) reaction. The PDDA reaction differs from the DA reaction by the replacement of one of the C-C-double bonds of the diene moiety by a C-C triple bond and by the photochemical triggering of the reaction. This entails that, in contrast to the DA reaction, the PDDA reaction proceeds according to a multistage mechanism with biradicals and cycloallenes as intermediates. The PDDA reaction provides access to a considerable variety of compound classes. For example, 1-phenylnaphthlenes, 1,1'-binaphthyls, N-heterocyclic biaryls, and naphthalenophanes could be obtained by this reaction.     

Molecular beam studies of the F atom reaction with propyne: site specific reactivity

The dynamics of the F atom reaction with propyne (CH(3)CCH) has been investigated using a universal crossed molecular beam apparatus. Two reaction channels have been clearly observed: H+C(3)H(3)F and HF+C(3)H(3). The substitution of F for H occurs mainly via a complex formation mechanism, producing reaction products with some contribution from a direct reaction mechanism. The HF product, however, appears to be dominantly forward scattered relative to the F atom beam direction, suggesting that the HF formation occurs via a direct abstraction mechanism. Branching ratios for the two observed reaction channels are also determined. The H formation channel is found to be the major reaction pathway, while the HF formation channel is also significant. From the measurements of DF versus HF products from the F atom reaction with deuterated propyne, the H atom picked up by the F atom in the reaction with normal propyne seems to come mostly from the CH(3) group. In addition, the H atom produced in the H atom formation channel appears to be mostly from the CH(3) group with some contribution from the CCH group.     

Biosynthesis of riboflavin. The reaction catalyzed by 6,7-dimethyl-8-ribityllumazine synthase can proceed without enzymatic catalysis under physiological conditions

6,7-Dimethyl-8-ribityllumazine is the biosynthetic precursor of the vitamin, riboflavin. The biosynthetic formation of the lumazine by condensation of 5-amino-6-ribitylamino-2,4(1H,3H)-pyrimidinedione and 3,4-dihydroxy-2-butanone 4-phosphate is catalyzed by the enzyme, lumazine synthase. We show that the condensation reaction can proceed without enzyme catalysis in dilute aqueous solution at room temperature and neutral pH. The reaction rate is proportional to e (pH). The activation energy of the uncatalyzed reaction is E(a) = 46.3 kJ mol(-)(1). The regioselectivity of the uncatalyzed reaction increases with pH and temperature (70% at 65 degrees C and pH 7.75). The data suggest partitioning of the uncatalyzed reaction via two different reaction pathways. The value of k(cat)/k(uncat) may be indicative for an entropy driven process for the enzyme-catalyzed reaction.     

Dramatic ligand effect in catalytic asymmetric reductive aldol reaction of allenic esters to ketones

A general catalytic asymmetric reductive aldol reaction of allenic esters to ketones is described. Two distinct constitutional isomers were selectively produced depending on the reaction conditions. A combination of CuOAc/(R)-DTBM-SEGPHOS/PCy3 as the catalyst predominantly produced gamma-cis-products in high yield with excellent enantioselectivity (up to 99% ee). The reaction was applicable to both aromatic and aliphatic ketones, including unsaturated ketones. On the other hand, CuF-Taniaphos complexes produced alpha-aldol products with high diastereo- and enantioselectivity (up to 84% ee). The new Taniaphos derivative L3, containing di(3,5-xylyl)phosphine and morpholine units, produced optimum results in the alpha-selective reaction. The products are versatile chiral building blocks in organic synthesis. Furthermore, the basic reaction pattern (i.e., conjugate addition-aldol reaction) was extended to a catalytic enantioselective alkylative aldol reaction to ketones using dialkylzinc reagents as the initiator.     

Kinetics of the O + ICN reaction

The kinetics of the O + ICN reaction was studied using a relative rate method, with O + C(2)H(2) as the competing reaction. Carbon monoxide products formed in the competing reaction and subsequent secondary chemistry were detected as a function of reagent ICN pressure to obtain total rate constants for the O + ICN reaction. Analysis of the experimental data yields rate constants of k(1) = (3.7 ± 1.0 to 26.2 ± 4.0) × 10(-14) cm(3) molecule(-1) s(-1) over the total pressure range 1.5-9.5 Torr. Product channel NCO + I, the only bimolecular exothermic channel of the reaction, was investigated by detection of N(2)O in the presence of NO and found to be insignificant. An ab initio calculation of the potential energy surface (PES) of the reaction at the CCSD(T)/CEP-31G//DFT-B3LYP/CEP-31G level of theory was also performed. The pathways leading to bimolecular product channels are kinetically unfavorable. Formation and subsequent stabilization of an ICNO adduct species appears to dominate the reaction, in agreement with the experimentally observed pressure dependent rate constants.     

3,8-双乙酰基次卟啉二甲酯的合成

以氯化血红素(Ⅰ)为原料,经过溴化氢-冰醋酸加成反应、羟基亲核取代反应和无水氯化氢催化酯化反应制得3,8-双-(1-羟基乙基)次卟啉二甲酯(Ⅲ),然后通过琼斯试剂氧化反应制备了3,8-双乙酰基次卟啉二甲酯(Ⅳ)。 考察了血红素与溴化氢-冰醋酸饱和溶液反应过程中温度和时间对3,8-双-(1-羟基乙基)次卟啉二甲酯(Ⅲ)产率的影响;改进了酯化反应的实验条件;选用了廉价易得、选择性较好的羟基选择性氧化剂。 实验结果表明,当反应温度为35 ℃、反应时间为25 h时,血卟啉(Ⅱ)的产率最高,为98.5%;当催化剂为无水氯化氢时产物(Ⅲ)的产率最高,为72.1%;使用琼斯试剂做氧化剂使实验成本大大降低。 通过1H NMR、MS和IR测试技术对产物结构进行了表征。     

STUDY ON THE CHAIN-EXTENDING REACTION OF POLY (ETHYLENE TEREPHTHALATE) WITH 2, 2′-BIS (4H-3, 1-BENZOXAZIN-4-ONE)

2,2'-Bis (4H-3, 1-benzoxazin-4-one) (BBON) has been proved to be an effective chainextender for poly (ethylene terephthalate) (PET). In order to study the reaction mechanismand kinetics of chain-extending reaction, β-bishydroxyethylene terephthalate (BHET) wasselected as model compound. The NMR data, IR spectra and number average molecularweight (M_n) of the products obtained from the reaction of BBON and BHET verify thatBBON is a hydroxyl-reactive extender. The mechanism was discussed. Kinetics dataindicate that extending reaction is a second order reaction, and BBON has high reactivity.The activation energy (E_a) was measured.     

Effect of amine nature on reaction mechanism: aminolyses of o-4-nitrophenyl thionobenzoate with primary and secondary amines

Pseudo-first-order rate constants (k(obs)) have been measured spectrophotometrically for reactions of O-4-nitrophenyl thionobenzoate (2) with a series of primary and acyclic secondary amines. The plots of k(obs) vs amine concentration are linear for the reaction of 2 with primary amines. The slope of the Br?nsted-type plot for the reaction of 2 with primary amines decreases from 0.77 to 0.17 as the amine basicity increases, indicating that the reaction proceeds through a zwitterionic addition intermediate in which the rate-determining step changes from the breakdown of the intermediate to the reaction products to the formation of the intermediate as the amine basicity increases. On the other hand, for reactions with all the acyclic secondary amines studied, the plot of k(obs) vs amine concentration exhibits an upward curvature, suggesting that the reaction proceeds through two intermediates, e.g., a zwitterionic addition intermediate and an anionic intermediate. The microscopic rate constants (k(1), k(-)(1), k(2), and k(3) where available) have been determined for the reactions of 2 with all the primary and secondary amines studied. The k(1) value is larger for the reaction with the primary amine than for the reaction with the isobasic acyclic secondary amines, while the k(-)(1) value is much larger for the latter reaction than for the former reaction. The k(3) value for the reaction with secondary amine is independent of the amine basicity. The small k(2)/k(-)(1) ratio is proposed to be responsible for the deprotonation process observed in aminolyses of carbonyl or thiocarbonyl derivatives.