Electrocatalytic proton reduction by phosphido-bridged diiron carbonyl compounds: distant relations to the H-cluster?

Intermediates formed during reduction of Fe(2)(mu-PPh(2))(2)(CO)(6) (1) in the presence of protons have been identified by spectroelectrochemical, continuous-flow, and interrupted-flow techniques. The mechanism for electrocatalytic proton reduction suggested by these observations yields digital simulation of the voltammetry in close agreement with measurements conducted in THF over a range of acid concentrations. The mechanism for electrocatalytic proton reduction involves initial formation of the dianion, 1(2-), which is doubly protonated prior to further reduction and dihydrogen elimination. The IR spectra of the singly and doubly protonated forms of 1(2-) indicate structures corresponding to [FeH(CO)(3)(mu-PPh(2))(2)Fe(CO)(3)](-) (1H-) and FeH(CO)(3)(mu-PPh(2))(2)FeH(CO)(3) (1H(2)). The thiolato and dithiolato analogues of 1 exhibit electrocatalytic proton reduction associated with the two-electron reduction step, and this implies that the corresponding two-electron reduced doubly protonated species is unstable with respect to dihydrogen elimination. The stability of 1H(2) is most likely to be due to the weak interactions between the iron centers of the flattened [2Fe2P] core. Whereas 1H(2) is stable in the absence of a reducing potential, 1H- rearranges rapidly to a product previously described as [Fe(2)(mu-PPh(2))(mu-CO)(PHPh(2))(CO)(5)](-) (1H-(W)). Another protonation product of 1(2-), previously formulated as [Fe(2)(mu-PPh(2))(2)(mu-CO)H(CO)(5)](-), has been reformulated as [Fe(2)(mu-PPh(2))(mu-CO)(CO)(6)](-) (2) on the basis of a range of spectroscopic measurements. Solution EXAFS measurements of 1, 1(2-), 1H-(W), and 2 are reported, and these yield model-independent Fe-Fe distances of 2.61 (1), 3.58 (1(2-)), 2.58 (1H-(W)), and 2.59 A (2). The presence of an Fe-Fe bond for both 1H-(W) and 2 is a key aspect of the proposed structures, and this strongly supports the deductions based on spectroscopic evidence. The fits of the solution EXAFS to different structural models give statistics in agreement with the proposed structures.     

Isolation, observation, and computational modeling of proposed intermediates in catalytic proton reductions with the hydrogenase mimic Fe2(CO)6S2C6H4

Proposed electrocatalytic proton reduction intermediates of hydrogenase mimics were synthesized, observed, and studied computationally. A new mechanism for H(2) generation appears to involve Fe(2)(CO)(6)(1,2-S(2)C(6)H(4)) (3), the dianions {[1,2-S(2)C(6)H(4)][Fe(CO)(3)(μ-CO)Fe(CO)(2)](2-) (3(2-)), the bridging hydride {[1,2-S(2)C(6)H(4)][Fe(CO)(3)(μ-CO)(μ-H)Fe(CO)(2)]}(-), 3H(-)(bridging), and the terminal hydride 3H(-)(term-stag), {[1,2-S(2)C(6)H(4)][HFe(CO)(3)Fe(CO)(3)]}(-), as intermediates. The dimeric sodium derivative of 3(2-), {[Na(2)(THF)(OEt(2))(3)][3(2-)]}(2) (4) was isolated from reaction of Fe(2)(CO)(6)(1,2-S(2)C(6)H(4)) (3) with excess sodium and was characterized by X-ray crystallography. It possesses a bridging CO and an unsymmetrically bridging dithiolate ligand. Complex 4 reacts with 4 equiv. of triflic or benzoic acid (2 equiv. per Fe center) to generate H(2) and 3 in 75% and 60% yields, respectively. Reaction of 4 with 2 equiv. of benzoic acid generated two hydrides in a 1.7 : 1 ratio (by (1)H NMR spectroscopy). Chemical shift calculations on geometry optimized structures of possible hydride isomers strongly suggest that the main product, 3H(-)(bridging), possesses a bridging hydride ligand, while the minor product is a terminal hydride, 3H(-)(term-stag). Computational studies support a catalytic proton reduction mechanism involving a two-electron reduction of 3 that severs an Fe-S bond to generate a dangling thiolate and an electron rich Fe center. The latter iron center is the initial site of protonation, and this event is followed by protonation at the dangling thiolate to give the thiol thiolate [Fe(2)H(CO)(6)(1,2-SHSC(6)H(4))]. This species then undergoes an intramolecular acid-base reaction to form a dihydrogen complex that loses H(2) and regenerates 3.     

Heme/non-heme diiron(II) complexes and O2, CO, and NO adducts as reduced and substrate-bound models for the active site of bacterial nitric oxide reductase

As a first generation model for the reactive reduced active-site form of bacterial nitric oxide reductase, a heme/non-heme diiron(II) complex [(6L)Fe(II)...Fe(II)-(Cl)]+ (2) {where 6L = partially fluorinated tetraphenylporphyrin with a tethered tetradentate TMPA chelate; TMPA = tris(2-pyridyl)amine} was generated by reduction of the corresponding mu-oxo diferric compound [(6L)Fe(III)-O-Fe(III)-Cl]+ (1). Coordination chemistry models for reactions of reduced NOR with O2, CO, and NO were also developed. With O2 and CO, adducts are formed, [(6L)Fe(III)(O2-))(thf)...Fe(II)-Cl]B(C6F5)4 (2a x O2) {lambda(max) 418 (Soret), 536 nm; nu(O-O) = 1176 cm(-1), nu(Fe-O) = 574 cm(-1) and [(6L)Fe(II)(CO)(thf)Fe(II)-Cl]B(C6F5)4 (2a x CO) {nu(CO) 1969 cm(-1)}, respectively. Reaction of purified nitric oxide with 2 leads to the dinitrosyl complex [(6L)Fe(NO)Fe(NO)-Cl]B(C6F5)4 (2a x (NO)2) with nu(NO) absorptions at 1798 cm(-1) (non-heme Fe-NO) and 1689 cm(-1) (heme-NO).     

Protonation, electrochemical properties and molecular structures of halogen-functionalized diiron azadithiolate complexes related to the active site of iron-only hydrogenases

Diiron complexes [{(micro-SCH2)2NCH2C6H4X}{Fe(CO)2L}2] (L = CO, X = 2-Br, 1; 2-F, 2; 3-Br, 3; L = PMe(3), X = 2-Br, 4) were prepared as biomimetic models of the iron-only hydrogenase active site. The N-protonated species [(NH)]+ClO(4)(-), [(NH)](+)ClO(4)(-) and the micro-hydride diiron complex [4(FeHFe)]+PF(6)(-) were obtained in the presence of proton acids and well characterized. The protonation process of 4 was studied by in-situ IR and NMR spectroscopy, which suggests the formation of the diprotonated species [4(NH)(FeHFe)](2+) in the presence of an excess of proton acid. The molecular structures of 1, [(NH)]+ClO(4)(-), 4 and [4(FeHFe)]+PF(6)(-) were determined by X-ray crystallography. The single-crystal X-ray analysis reveals that an intramolecular H...Br contact (2.82 A) in the crystalline state of [1(NH)]+ClO(4)(-). In the presence of 1-6 equiv of the stronger acid HOTf, complex 1 is readily protonated on the bridged-N atom and can electrochemically catalyze the proton reduction at a relatively mild potential (ca.-1.0 V). Complex 4 is also electrocatalytic active at -1.4 V in the presence of HOTf with formation of the micro-hydride diiron species.     

Bimetallic carbonyl thiolates as functional models for Fe-only hydrogenases

The anion [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) (2(-)) is protonated by sulfuric or toluenesulfonic acid to give HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) (2H), the structure of which has the hydride bridging the Fe atoms with the PMe(3) and CN(-) trans to the same sulfur atom. (1)H, (13)C, and (31)P NMR spectroscopy revealed that HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) is stereochemically rigid on the NMR time scale with four inequivalent carbonyl ligands. Treatment of 2(-) with (Me(3)O)BF(4) gave Fe(2)(S(2)C(3)H(6))(CNMe)(CO)(4)(PMe(3)) (2Me). The Et(4)NCN-induced reaction of Fe(2)(S(2)C(3)H(6))(CO)(6) with P(OMe)(3) gave [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-) (4). Spectroscopic and electrochemical measurements indicate that 2H can be further protonated at nitrogen to give [HFe(2)(S(2)C(3)H(6))(CNH)(CO)(4)(PMe(3))](+) (2H(2)(+)). Electrochemical and analytical data show that reduction of 2H(2)(+) gives H(2) and 2(-). Parallel electrochemical studies on [HFe(2)(S(2)C(3)H(6))(CO)(4)(PMe(3))(2)](+) (3H(+)) in acidic solutions led also to catalytic proton reduction. The 3H(+)/3H couple is reversible, whereas the 2H(2)(+)/2H(2) couple is not, because of the efficiency of the latter as a proton reduction catalyst. Proton reduction is proposed to involve protonation of reduced diiron hydrides. DFT calculations establish that the regiochemistry of protonation is subtly dependent on the coligands but is more favorable to occur at the Fe-Fe bond for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) than for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PH(3))](-) or [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-). The Fe(2)H unit stabilizes the conformer with eclipsed CN and PMe(3) because of an attractive electrostatic interaction between these ligands.     

The hydrophilic phosphatriazaadamantane ligand in the development of H2 production electrocatalysts: iron hydrogenase model complexes

As functional biomimics of the hydrogen-producing capability of the dinuclear active site in [Fe]H(2)ase, the Fe(I)Fe(I) organometallic complexes, (mu-pdt)[Fe(CO)(2)PTA](2), 1-PTA(2), (pdt = SCH(2)CH(2)CH(2)S; PTA = 1,3,5-triaza-7-phosphaadamantane), and (mu-pdt)[Fe(CO)(3)][Fe(CO)(2)PTA], 1-PTA, were synthesized and fully characterized. For comparison to the hydrophobic (mu-pdt)[Fe(CO)(2)(PMe(3))](2) and [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) analogues, electrochemical responses of 1-PTA(2) and 1-(PTA.H(+))(2) were recorded in acetonitrile and in acetonitrile/water mixtures in the absence and presence of acetic acid. The production of H(2) and the dependence of current on acid concentration indicated that the complexes were solution electrocatalysts that decreased over-voltage for H(+) reduction from HOAc in CH(3)CN by up to 600 mV. The most effective electrocatalyst is the asymmetric 1-PTA species, which promotes H(2) formation from HOAc (pK(a) in CH(3)CN = 22.6) at -1.4 V in CH(3)CN/H(2)O mixtures at the Fe(0)Fe(I) redox level. Functionalization of the PTA ligand via N-protonation or N-methylation, generating (mu-pdt)[Fe(CO)(2)(PTA-H(+))](2), 1-(PTA.H(+))(2), and (mu-pdt)[Fe(CO)(2)(PTA-CH(3)(+))](2), 1-(PTA-Me(+))(2), provided no obvious advantages for the electrocatalysis because in both cases the parent complex is reclaimed during one cycle under the electrochemical conditions and H(2) production catalysis develops from the neutral species. The order of proton/electron addition to the catalyst, i.e., the electrochemical mechanism, is dependent on the extent of P-donor ligand substitution and on the acid strength. Cyclic voltammetric curve-crossing phenomena was observed and analyzed in terms of the possible presence of an eta(2)-H(2)-Fe(II)Fe(I) species, derived from reduction of the Fe(I)Fe(I) parent complex to Fe(0)Fe(I) followed by uptake of two protons in an ECCE mechanism.     

Modeling the active sites in metalloenzymes. 3. Density functional calculations on models for [Fe]-hydrogenase: structures and vibrational frequencies of the observed redox forms and the reaction mechanism at the Diiron Active Center.

Optimized structures for the redox species of the diiron active site in [Fe]-hydrogenase as observed by FTIR and for species in the catalytic cycle for the reversible H(2) oxidation have been determined by density-functional calculations on the active site model, [(L)(CO)(CN)Fe(mu-PDT)(mu-CO)Fe(CO)(CN)(L')](q)(L = H(2)O, CO, H(2), H(-); PDT = SCH(2)CH(2)CH(2)S, L' = CH(3)S(-), CH(3)SH; q = 0, 1-, 2-, 3-). Analytical DFT frequencies on model complexes (mu-PDT)Fe(2)(CO)(6) and [(mu-PDT)Fe(2)(CO)(4)(CN)(2)](2)(-) are used to calibrate the calculated CN(-) and CO frequencies against the measured FTIR bands in these model compounds. By comparing the predicted CN(-) and CO frequencies from DFT frequency calculations on the active site model with the observed bands of D. vulgaris [Fe]-hydrogenase under various conditions, the oxidation states and structures for the diiron active site are proposed. The fully oxidized, EPR-silent form is an Fe(II)-Fe(II) species. Coordination of H(2)O to the empty site in the enzyme's diiron active center results in an oxidized inactive form (H(2)O)Fe(II)-Fe(II). The calculations show that reduction of this inactive form releases the H(2)O to provide an open coordination site for H(2). The partially oxidized active state, which has an S = (1)/(2) EPR signal, is an Fe(I)-Fe(II) species. Fe(I)-Fe(I) species with and without bridging CO account for the fully reduced, EPR-silent state. For this fully reduced state, the species without the bridging CO is slightly more stable than the structure with the bridging CO. The correlation coefficient between the predicted CN(-) and CO frequencies for the proposed model species and the measured CN(-) and CO frequencies in the enzyme is 0.964. The proposed species are also consistent with the EPR, ENDOR, and M?ssbauer spectroscopies for the enzyme states. Our results preclude the presence of Fe(III)-Fe(II) or Fe(III)-Fe(III) states among those observed by FTIR. A proposed reaction mechanism (catalytic cycle) based on the DFT calculations shows that heterolytic cleavage of H(2) can occur from (eta(2)-H(2))Fe(II)-Fe(II) via a proton transfer to "spectator" ligands. Proton transfer to a CN(-) ligand is thermodynamically favored but kinetically unfavorable over proton transfer to the bridging S of the PDT. Proton migration from a metal hydride to a base (S, CN, or basic protein site) results in a two-electron reduction at the metals and explains in part the active site's dimetal requirement and ligand framework which supports low-oxidation-state metals. The calculations also suggest that species with a protonated Fe-Fe bond could be involved if the protein could accommodate such species.     

Preparation, Structure and Electrochemical Property of a Pyrazole-substituted Diiron Dithiolate Complex

A pyrazole-substituted diiron dithiolate complex [Fe2(μ-pdt)(CO)5(3,5-Me2Pz)](1,3,5-Me 2Pz=3,5-dimethylpyrazole) was prepared as a biomimetic model for the active site of [FeFe]-hydrogenase by CO-substitution of all-carbonyl complex [Fe2(μ-pdt)(CO)6] with 3,5-Me2Pz. The molecular structure was confirmed by MS, IR, 1H NMR, elemental analysis and single-crystal X-ray analysis. Complex 1 crystallizes in the triclinic system, space group P1 with a=9.108(7), b=9.743(8), c=11.192(9), α=109.235(5), β=101.914(9), γ=96.605(6)o. In CH3CN solution, reversible transformation between 1 and the acetonitrile-substituted species [Fe2(μ-pdt)-(CO)5(NCCH3)] was detected by both IR and cyclic voltammetry (CV). The electrochemical proton reduction catalyzed by 1 in the presence of acetic acid was also studied in CH2Cl2.     

Catalysis of H(2)/D(2) scrambling and other H/D exchange processes by [Fe]-hydrogenase model complexes

Protonation of the [Fe]-hydrogenase model complex (mu-pdt)[Fe(CO)(2)(PMe(3))](2) (pdt = SCH(2)CH(2)CH(2)S) produces a species with a high field (1)H NMR resonance, isolated as the stable [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+)[PF(6)](-) salt. Structural characterization found little difference in the 2Fe2S butterfly cores, with Fe.Fe distances of 2.555(2) and 2.578(1) A for the Fe-Fe bonded neutral species and the bridging hydride species, respectively (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Yarbrough, J. C.; Darensbourg, M. Y. J. Am. Chem. Soc. 2001, 123, 9710). Both are similar to the average Fe.Fe distance found in structures of three Fe-only hydrogenase active site 2Fe2S clusters: 2.6 A. A series of similar complexes (mu-edt)-, (mu-o-xyldt)-, and (mu-SEt)(2)[Fe(CO)(2)(PMe(3))](2) (edt = SCH(2)CH(2)S; o-xyldt = SCH(2)C(6)H(4)CH(2)S), (mu-pdt)[Fe(CO)(2)(PMe(2)Ph)](2), and their protonated derivatives likewise show uniformity in the Fe-Fe bond lengths of the neutral complexes and Fe.Fe distances in the cationic bridging hydrides. The positions of the PMe(3) and PMe(2)Ph ligands are dictated by the orientation of the S-C bonds in the (mu-SRS) or (mu-SR)(2) bridges and the subsequent steric hindrance of R. The Fe(II)(mu-H)Fe(II) complexes were compared for their ability to facilitate H/D exchange reactions, as have been used as assays of H(2)ase activity. In a reaction that is promoted by light but inhibited by CO, the [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) complex shows H/D exchange activity with D(2), producing [(mu-D)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) in CH(2)Cl(2) and in acetone, but not in CH(3)CN. In the presence of light, H/D scrambling between D(2)O and H(2) is also promoted by the Fe(II)(mu-H)Fe(II) catalyst. The requirement of an open site suggests that the key step in the reactions involves D(2) or H(2) binding to Fe(II) followed by deprotonation by the internal hydride base, or by external water. As indicated by similar catalytic efficiencies of members of the series, the nature of the bridging thiolates has little influence on the reactions. Comparison to [Fe]H(2)ase enzyme active site redox levels suggests that at least one Fe(II) must be available for H(2) uptake while a reduced or an electron-rich Fe(I)Fe(I) metal-metal bonded redox level is required for proton uptake.     

Diruthenium dithiolato cyanides: basic reactivity studies and a post hoc examination of nature's choice of Fe versus Ru for hydrogenogenesis

The reaction of Ru2(S2C3H6)(CO)6 (1) with 2 equiv of Et4NCN yielded (Et4N)2[Ru2(S2C3H6)(CN)2(CO)4], (Et4N)2[3], which was shown crystallographically to consist of a face-sharing bioctahedron with the cyanide ligands in the axial positions, trans to the Ru-Ru bond. Competition experiments showed that 1 underwent cyanation >100x more rapidly than the analogous Fe2(S2C3H6)(CO)6. Furthermore, Ru2(S2C3H6)(CO)6 underwent dicyanation faster than [Ru2(S2C3H6)(CN)(CO)5]-, implicating a highly electrophilic intermediate [Ru2(S2C3H6)(mu-CO)(CN)(CO)5]-. Ru2(S2C3H6)(CO)6 (1) is noticeably more basic than the diiron compound, as demonstrated by the generation of [Ru2(S2C3H6)(mu-H)(CO)6]+, [1H]+. In contrast to 1, the complex [1H]+ is unstable in MeCN solution and converts to [Ru2(S2C3H6)(mu-H)(CO)5(MeCN)]+. (Et4N)2[3] was shown to protonate with HOAc (pKa = 22.3, MeCN) and, slowly, with MeOH and H2O. Dicyanide [3]2- is stable toward excess acid, unlike the diiron complex; it slowly forms the coordination polymer [Ru2(S2C3H6)(mu-H)(CN)(CNH)(CO)4]n, which can be deprotonated with Et3N to regenerate [H3]-. Electrochemical experiments demonstrate that [3H]- catalyzes proton reduction at -1.8 V vs Ag/AgCl. In contrast to [3]2-, the CO ligands in [3H]- undergo displacement. For example, PMe3 and [3H]- react to produce [Ru2(S2C3H6)(mu-H)(CN)2(CO)3(PMe3)]-. Oxidation of (Et4N)2[3] with 1 equiv of Cp2Fe+ gave a mixture of [Ru2(S2C3H6)(mu-CO)(CN)3(CO)3]- and [Ru2(S2C3H6)(CN)(CO)5]-, via a proposed [Ru2]2(mu-CN) intermediate. Overall, the ruthenium analogues of the diiron dithiolates exhibit reactivity highly reminiscent of the diiron species, but the products are more robust and the catalytic properties appear to be less promising.     

Coordination sphere flexibility of active-site models for Fe-only hydrogenase: studies in intra- and intermolecular diatomic ligand exchange.

A series of dinuclear complexes, (mu-SRS)Fe(2)(CO)(6) (R = -CH(2)CH(2)-, -CH(2)CH(2)CH(2)-, -CH(2)-C(6)H(4)-CH(2)-; edt, pdt, and o-xyldt, respectively) has been examined for specific characteristics that might relate to structural similarity with the active site of Fe-only hydrogenases. Variable-temperature proton NMR studies display the fluxionality of the iron-dithiocyclohexane unit in (mu-pdt)Fe(2)(CO)(6) while in the (mu-o-xyldt)Fe(2)(CO)(6) compound, the bridge is fixed. Temperature-dependent (13)C NMR spectral studies establish intramolecular CO site exchange localized on discrete Fe(CO)(3) units in all complexes, which is influenced by steric effects of the mu-SRS unit. Kinetic studies of intermolecular CO/CN(-) ligand-exchange reactions establish associative or I(a) mechanisms in sequential steps to form the dicyano dianion, (mu-SRS)[Fe(CO)(2)(CN)](2)(=) with 100% selectivity. Theoretical calculations (DFT) of transition states in the intramolecular site-exchange processes lead to a rationale for the interesting cooperativity in the CN(-)/CO intermolecular ligand-exchange process. The hinge motion of the three light atom S-to-S bridge is related to a possible heterolytic H(2) activation/production process in the enzyme.     

Cluster expansion reactions of group 6 and 8 metallaboranes using transition metal carbonyl compounds of groups 7-9

The reinvestigation of an early synthesis of heterometallic cubane-type clusters has led to the isolation of a number of new clusters which have been characterized by spectroscopic and crystallographic techniques. The thermolysis of [(Cp*Mo)(2)B(4)H(4)E(2)] (1: E = S; 2: E = Se; Cp* = η(5)-C(5)Me(5)) in presence of [Fe(2)(CO)(9)] yielded cubane-type clusters [(Cp*Mo)(2)(μ(3)-E)(2)B(2)H(μ-H){Fe(CO)(2)}(2)Fe(CO)(3)], 4 and 5 (4: E = S; 5: E = Se) together with fused clusters [(Cp*Mo)(2)B(4)H(4)E(2)Fe(CO)(2)Fe(CO)(3)] (8: E = S; 9: E = Se). In a similar fashion, reaction of [(Cp*RuCO)(2)B(2)H(6)], 3, with [Fe(2)(CO)(9)] yielded [(Cp*Ru)(2)(μ(3)-CO)(2)B(2)H(μ-H){Fe(CO)(2)}(2)Fe(CO)(3)], 6, and an incomplete cubane cluster [(μ(3)-BH)(3)(Cp*Ru)(2){Fe(CO)(3)}(2)], 7. Clusters 4-6 can be described as heterometallic cubane clusters containing a Fe(CO)(3) moiety exo-bonded to the cubane, while 7 has an incomplete cubane [Ru(2)Fe(2)B(3)] core. The geometry of both compounds 8 and 9 consist of a bicapped octahedron [Mo(2)Fe(2)B(3)E] and a trigonal bipyramidal [Mo(2)B(2)E] core, fused through a common three vertex [Mo(2)B] triangular face. In addition, thermolysis of 3 with [Mn(2)(CO)(10)] permits the isolation of arachno-[(Cp*RuCO)(2)B(3)H(7)], 10. Cluster 10 constitutes a diruthenaborane analogue of 8-sep pentaborane(11) and has a structural isomeric relationship to 1,2-[{Cp*Ru}(2)(CO)(2)B(3)H(7)].     

Direct Lanthanide-Transition Metal Interactions: Synthesis of (NH(3))(2)YbFe(CO)(4) and Crystal Structures of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity)

The heterometallic complex (NH(3))(2)YbFe(CO)(4) was prepared from the reduction of Fe(3)(CO)(12) by Yb in liquid ammonia. Ammonia was displaced from (NH(3))(2)YbFe(CO)(4) by acetonitrile in acetonitrile solution, and the crystalline compounds {[(CH(3)CN)(3)YbFe(CO)(4))](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity) were obtained. An earlier X-ray study of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) showed that it is a ladder polymer with direct Yb-Fe bonds. In the present study, an X-ray crystal structure analysis also showed that [(CH(3)CN)(3)YbFe(CO)(4)](infinity) is a sheetlike array with direct Yb-Fe bonds. Crystal data for {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity): monoclinic space group P2(1)/c, a = 21.515(8) ?, b = 7.838(2) ?, c = 19.866(6) ?, beta = 105.47(2) degrees, Z = 4. Crystal data for [(CH(3)CN)(3)YbFe(CO)(4)](infinity): monoclinic space group P2(1)/n, a = 8.364(3) ?, b = 9.605(5) ?, c = 17.240(6) ?, beta = 92.22(3) degrees, Z = 4. Electrical conductivity measurements in acetonitrile show that these acetonitrile complexes are partially dissociated into ionic species. IR and NMR spectra of the solutions reveal the presence of [HFe(CO)(4)](-). However, upon recrystallization, the acetonitrile complexes show no evidence for the presence of [HFe(CO)(4)](-) on the basis of their IR spectra. The solid state MAS (2)H NMR spectra of deuterated acetonitrile complexes give no evidence for [(2)HFe(CO)(4)](-). It appears that rupture of the Yb-Fe bond could occur in solution to generate the ion pair [L(n)Yb](2+)[Fe(CO)(4)](2-), but then the highly basic [Fe(CO)(4)](2-) anion could abstract a proton from a coordinated acetonitrile ligand to form [HFe(CO)(4)](-). However, upon crystallization, the proton could be transferred back to the ligand, which results in the neutral polymeric species.     

Electrochemical insights into the mechanisms of proton reduction by [Fe2(CO)6{micro-SCH2N(R)CH2S}] complexes related to the [2Fe](H) subsite of [FeFe]hydrogenase

Electrochemical investigations on a structural analogue of the [2Fe](H) subsite of [FeFe]H(2)ases, namely, [Fe(2)(CO)(6){micro-SCH(2)N(CH(2)CH(2)- OCH(3))CH(2)S}] (1), were conducted in MeCN/NBu(4)PF(6) in the presence of HBF(4)/Et(2)O or HOTs. Two different catalytic proton reduction processes operate, depending on the strength and the concentration of the acid used. The first process, which takes place around -1.2 V for both HBF(4)/Et(2)O and HOTs, is limited by the slow release of H(2) from the product of the {2 H(+)/2 e} pathway, 1-2H. The second catalytic process, which occurs at higher acid concentrations, takes place at different potentials depending on the acid present. We propose that this second mechanism is initiated by protonation of 1-2H when HBF(4)/Et(2)O is used, whereas the reduction of 1-2H is the initial step in the presence of the weaker acid HOTs. The potential of the second process, which occurs around -1.4 V (reduction potential of 1-3H(+)) or around -1.6 V (the reduction potential of 1-2H) is thus dependent on the strength of the available proton source.     

Multi-site reactivity: reduction of six equivalents of nitrite to give an Fe6(NO)6 cluster with a dramatically expanded octahedral core

Reaction of NO(2)(-) with the octahedral cluster ((H)L)(2)Fe(6) in the presence of a proton source affords the hexanitrosyl cluster ((H)L)(2)Fe(6)(NO)(6). This species forms via a proton-induced reduction of six nitrite molecules per cluster, utilizing each site available on the polynuclear core. Formation of the hexanitrosyl cluster is accompanied by a near 2-fold expansion of the ((H)L)(2)Fe(6) core volume, where intracore Fe-Fe interactions are overcome by strong π-bonding between Fe centers and NO ligands. A core volume of this magnitude is rare in octahedral metal clusters not supported by interstitial atoms. Moreover, the structural flexibility afforded by the ((H)L)(2)Fe(6) platform highlights the potential for other reaction chemistry involving species with metal-ligand multiple bonds. Carrying out the reaction of the cluster [((H)L)(2)Fe(6)(NCMe)(6)](4+) with nitrite in the absence of a proton source serves to forestall the nitrite reduction and enables clean isolation of the intermediate hexanitro cluster [((H)L)(2)Fe(6)(NO(2))(6)](2-).     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

Synthesis and Characterization of nido-[1,1,2,2-(CO)(4)-1,2-(PPh(3))(2)-1,2-FeIrB(2)H(5)]: A Heterobimetallaborane Analogue of nido-[B(4)H(7)](-)

The synthesis and characterization of nido-[1,1,2,2-(CO)(4)-1,2-(PPh(3))(2)-1,2-FeIrB(2)H(5)] (1) is reported. 1 is formed in low yield as a degradation product from the reaction between [{&mgr;-Fe(CO)(4)}B(6)H(9)](-) and trans-Ir(CO)Cl(PPh(3))(2) in THF and is characterized from NMR, IR, and analytical data and by a single-crystal X-ray diffraction study. 1 crystallizes in the monoclinic space group P2(1)/n with a = 12.8622(12), b = 14.3313(12), c = 23.579(3) ?, beta = 97.12(2) degrees, Z = 4, V = 4257.0(8) ?(3), R(1) = 4.83%, and wR(2)()(F(2)) = 12.43%. The heterobimetallaborane structure may be viewed as a derivative of the binary boron hydride nido-[B(4)H(7)](-) and is related to the known homobimetallatetraborane analogues [Fe(2)(CO)(6)B(2)H(6)] and [Co(2)(CO)(6)B(2)H(4)]. 1 exhibits proton fluxionality in its (1)H NMR spectrum, which is related to that found in the latter two compounds.     

Modeling [Fe-Fe] hydrogenase: evidence for bridging carbonyl and distal iron coordination vacancy in an electrocatalytically competent proton reduction by an iron thiolate assembly that operates through Fe(0)-Fe(II) levels

IR spectroelectrochemistry of Fe4{Me(CH2S)3}2(CO)8 (4Fe6S) in the nu(CO) region shows that the neutral and anion forms have all their CO groups terminally bound to the Fe atoms; however, for the dianion there is a switch of the coordination mode of at least one of the CO groups. The available structural and nu(CO) spectra are closely reproduced by density-functional theory calculations. The calculated structure of 4Fe6S2- closely mirrors that of the diiron subsite of the [Fe-Fe] hydrogenase H cluster with a bridging CO group and an open coordination site on the outer Fe atom of pairs of dithiolate-bridged Fe0FeII subunits connected by two bridging thiolates. Geometry optimization based on the all-terminal CO isomer of 4Fe6S2- does not give a stable structure but reveals a second-order saddle point ca. 11.53 kcal mol(-1) higher in energy than the CO-bridged form. Spectroelectrochemical studies of electrocatalytic proton reduction by 4Fe6S show that slow turnover from the primary reduction process (E1/2'=-0.71 V vs Ag/AgCl) involves rate-limiting protonation of 4Fe6S- followed by reduction to H:4Fe6S-. Rapid electrocatalytic proton reduction is obtained at potentials sufficient to access 4Fe6S2-, where the rate of dihydrogen elimination from the FeIIFeII core of 4Fe6S is ca. 500 times faster than that from the FeIFeI core of Fe2(mu-S(CH2)3S)(CO)6. The dramatically increased rate of electrocatalysis obtained from 4Fe6S over all previously identified model compounds appears to be related to the features uniquely common between it and the H-cluster, namely, that turnover involves the same formal redox states of the diiron unit (FeIFeII and Fe0FeII), the presence of an open site on the outer Fe atom of the Fe0FeII unit, and the thiolate-bridge to a second one-electron redox unit.     

Iron borohydride pincer complexes for the efficient hydrogenation of ketones under mild, base-free conditions: synthesis and mechanistic insight

The new, structurally characterized hydrido carbonyl tetrahydridoborate iron pincer complex [(iPr-PNP)Fe(H)(CO)(η(1)-BH(4))] (1) catalyzes the base-free hydrogenation of ketones to their corresponding alcohols employing only 4.1 atm hydrogen pressure. Turnover numbers up to 1980 at complete conversion of ketone were reached with this system. Treatment of 1 with aniline (as a BH(3) scavenger) resulted in a mixture of trans-[(iPr-PNP)Fe(H)(2)(CO)] (4a) and cis-[(iPr-PNP)Fe(H)(2)(CO)] (4b). The dihydrido complexes 4a and 4b do not react with acetophenone or benzaldehyde, indicating that these complexes are not intermediates in the catalytic reduction of ketones. NMR studies indicate that the tetrahydridoborate ligand in 1 dissociates prior to ketone reduction. DFT calculations show that the mechanism of the iron-catalyzed hydrogenation of ketones involves alcohol-assisted aromatization of the dearomatized complex [(iPr-PNP*)Fe(H)(CO)] (7) to initially give the Fe(0) complex [(iPr-PNP)Fe(CO)] (21) and subsequently [(iPr-PNP)Fe(CO)(EtOH)] (38). Concerted coordination of acetophenone and dual hydrogen-atom transfer from the PNP arm and the coordinated ethanol to, respectively, the carbonyl carbon and oxygen atoms, leads to the dearomatized complex [(iPr-PNP*)Fe(CO)(EtO)(MeCH(OH)Ph)] (32). The catalyst is regenerated by release of 1-phenylethanol, followed by dihydrogen coordination and proton transfer to the coordinated ethoxide ligand.     

(NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')]: an iron thiolate complex modeling the [Fe(CN)(2)(CO)(S-Cys)(2)] site of [NiFe] hydrogenase centers

In the search for complexes modeling the [Fe(CN)(2)(CO)(cysteinate)(2)] cores of the active centers of [NiFe] hydrogenases, the complex (NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')] (4) was found ('S(3)'(2-)=bis(2-mercaptophenyl)sulfide(2-)). Starting complex for the synthesis of 4 was [Fe(CO)(2)('S(3)')](2) (1). Complex 1 formed from [Fe(CO)(3)(PhCH=CHCOMe)] and neutral 'S(3)'-H(2). Reactions of 1 with PCy(3) or DPPE (1,2-bis(diphenylphosphino)ethane) yielded diastereoselectively [Fe(CO)(2)(PCy(3))('S(3)')] (2) and [Fe(CO)(dppe)('S(3)')] (3). The diastereoselective formation of 2 and 3 is rationalized by the trans influence of the 'S(3)'(2-) thiolate and thioether S atoms which act as pi donors and pi acceptors, respectively. The trans influence of the 'S(3)'(2-) sulfur donors also rationalizes the diastereoselective formation of the C(1) symmetrical anion of 4, when 1 is treated with four equivalents of NEt(4)CN. The molecular structures of 1, 3 x 0.5 C(7)H(8), and (AsPh(4))(2)[Fe(CN)(2)(CO)('S(3)')] x acetone (4 a x C(3)H(6)O) were determined by X-ray structure analyses. Complex 4 is the first complex that models the unusual 2:1 cyano/carbonyl and dithiolate coordination of the [NiFe] hydrogenase iron site. Complex 4 can be reversibly oxidized electrochemically; chemical oxidation of 4 by [Fe(Cp)(2)PF(6)], however, led to loss of the CO ligand and yielded only products, which could not be characterized. When dissolved in solvents of increasing proton activity (from CH(3)CN to buffered H(2)O), complex 4 exhibits drastic nu(CO) blue shifts of up to 44 cm(-1), and relatively small nu(CN) red shifts of approximately 10 cm(-1). The nu(CO) frequency of 4 in H(2)O (1973 cm(-1)) is higher than that of any hydrogenase state (1952 cm(-1)). In addition, the nu(CO) frequency shift of 4 in various solvents is larger than that of [NiFe] hydrogenase in its most reduced or oxidized state. These results demonstrate that complexes modeling properly the nu(CO) frequencies of [NiFe] hydrogenase probably need a [Ni(thiolate)(2)] unit. The results also demonstrate that the nu(CO) frequency of [Fe(CN)(2)(CO)(thiolate)(2)] complexes is more significantly shifted by changing the solvent than the nu(CO) frequency of [NiFe] hydrogenases by coupled-proton and electron-transfer reactions. The "iron-wheel" complex [Fe(6)[Fe('S(3)')(2)](6)] (6) resulting as a minor by-product from the recrystallization of 2 in boiling toluene could be characterized by X-ray structure analysis.