Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Identification of drying oils in mixtures of natural binding media used for artistic and historic works by capillary electrophoresis

To characterise the technologies and to find the appropriate treatments, the identification of the binding media of artistic and historic objects is of high importance for the restorer and conservator. Often applied together with other binders, in the present paper, the applicability of a CZE method was ascertained for the identification of the constituents of drying oils in mixtures with animal glues and/or plant gums. The drying oils are identified after alkaline hydrolysis due to their content of long‐chain saturated and unsaturated fatty acids (palmitic, stearic, oleic, linoleic, linolenic) and shorter‐chain dicarboxylic acids (pimelic, suberic, azelaic, sebacic). The dicarboxylic acids occur as products of the unsaturated acids by oxidative degradation during the drying process. The possible interferences in CE caused by the other binders are amino acids and/or monosaccharides. Such interferences could be expected as indirect UV detection has to be used, which is highly unspecific. It was found that none of the constituents of the animal glues or plant gums migrate in the time window of the analytes, thus not obstructing the identification of the analytes in any of the oil mixtures with one binder, or with a combination of both. No interference is observed even in excess of the glues. The method was applied for the identification of a drying oil in a paint layer from a ceremonial mask originating from Papua New Guinea. There is evidence that the oil is most probably from candlenut tree (Aleurites moluccana).     

Separation of perfluorocarboxylic acids using capillary electrophoresis with UV detection

A capillary electrophoretic method with UV detection for separation and quantitation of perfluorocarboxylic acids (PFCAs) from C6-PFCA to C12-PFCA has been developed. The optimization of measurement conditions included the choice of the most appropriate type and concentration of buffer in the background electrolyte (BGE), as well as the type and the content of an organic modifier. The optimal separation of investigated PFCAs was achieved with 50 mM phosphate buffer and 40% isopropanol in the BGE using direct UV detection. The optimum wavelength for direct UV detection was optimized at 190 nm. For indirect detection, several chromophores were studied. Five mM 3,5-Dinitrobenzoic acid (3,5-DNBA) in 20 mM phosphate buffer BGE and indirect UV detection at 280 nm gave the optimal detection and separation performance for the investigated PFCAs. The possibility of on-line preconcentration of solutes by stacking has been examined for indirect detection. The detection limits (LODs) determined for direct UV detection ranged from 2 microg/mL for C6-PFCA to 33 microg/mL for C12-PFCA. The LODs obtained for indirect UV detection were comparable to those obtained for direct UV detection.     

Novel approach for the rapid determination of water-soluble organic acids in wine by co-electroosmotic flow capillary zone electrophoresis

An innovative protocol for the fast analysis of some organic acids in red wine by co-electroosmotic capillary zone electrophoresis and indirect UV detection using hexadimethrine bromide (HDB) as coating agent was proposed. The adsorption of HDB onto the capillary wall provided a stable electroosmotic flow and separation of small anions was carried out using background electrolytes containing no polymer additive. Low RSD% values (<3.6%) in terms of migration times and effective mobilities were obtained from the analysis of a mixture of nitrate and nitrite and of a mixture of organic acids. An experimental design approach was used to investigate the effects of temperature, separation voltage, and percentage of methanol added to the running buffer solution on the separation of the analytes. A faster method allowing the separation of the organic acids involved in the malolactic fermentation of wine was developed. Using a running electrolyte consisting of 35% (v/v) methanol in a solution of 22 mM benzoic acid at pH 6.10 adjusted with 1.0 M TRIS-base buffer, the separation of tartaric, malic, succinic, acetic, and lactic acids was feasible in less than 210 s. Application of the method to the quantification of the above-mentioned organic acids in Italian red wine samples is reported.     

Capillary electrochromatographic separation of non-steroidal anti-inflammatory drugs with a histidine bonded phase

An open tubular wall-coated capillary column containing histidine functional groups was prepared and employed for the capillary electrochromatographic separation of non-steroidal anti-inflammatory drugs. The anion exchange along with the hydrogen bonding and hydrophobic properties of the surface coating allowed the separation of analytes with very similar ionic mobility. Selectivity and resolution were studied by changing the pH over the range from 3.5 to 5.0 and the concentration of the buffer from 10 to 25 mM, as well as variation of the organic modifier, such as methanol, ethanol and 1-propanol over the range 7.5 to 20%. The optimum experimental conditions for the separation of a drug mixture, which consisted of indoprofen, ketoprofen, suprofen, naproxen, flurbiprofen, fenoprofen and ibuprofen were using a mixture of acetate buffer (20 mM, pH 5.0)-ethanol (1:5, v/v) as background electrolyte and an applied voltage of -20 kV with UV detection at 220 nm. The separation of these drugs could be achieved with an average plate number of 1.0 x 10(5) m(-1).     

Method development and validation for the simultaneous determination of four coumarins in Saussurea superba by capillary zone electrophoresis

A capillary zone electrophoretic method has been developed for the determination of four coumarins--skimmin, scopolin, scopoletin, and umbelliferone-in Saussurea superba with UV detection at 254 nm. The capillary temperature was kept constant at 25 degrees C. Effects of buffer pH, electrolyte concentration, organic modifier, and applied voltage on migration behavior were studied systematically. The optimum conditions for separation were achieved by using 30 mM borate buffer at pH 9.02 containing 15% (v/v) methanol as the electrolyte and 25 kV as the applied voltage. For all analytes a good linear regression relationship (r > 0.999) was obtained between peak area and concentration over a relatively wide range. The method was validated for repeatability, precision, and accuracy. The validated method was successfully applied to the simultaneous determination of the four analytes in S. superba.     

Study of enzymatic reaction by electrophoretically mediated microanalysis in a partially filled capillary with indirect or direct detection

Electrophoretically mediated microanalysis (EMMA), in combination with a partial filling technique and indirect or direct detection, is described for the study of enzymes reacting with the high mobility inorganic or organic anions as substrates or products. Part of the capillary is filled with a buffer optimized for the enzymatic reaction, the rest of the capillary with the background electrolyte being optimal for the separation of substrates and products. With haloalkane dehalogenase, chosen as a model enzyme, the enzymatic reaction was performed in a 20 mM glycine buffer (pH 8.6). Because of the wide substrate specificity of this enzyme, utilizing chlorinated as well as brominated substrates and producing either nonabsorbing chloride or absorbing bromide ions, two different background electrolytes and detection approaches were adopted. A 10 mM chromate-0.1 mM cetyltrimethylammonium bromide background electrolyte (pH 9.2) was used in combination with indirect detection and 20 mM beta-alanine-hydrochloric acid (pH 3.5) in combination with direct detection. The Michaelis constant (K(m)) of haloalkane dehalogenase for 1-bromobutane was determined. The K(m) values 0.59 mM estimated by means of indirect detection method and 0.17 mM by means of direct detection method were comparable with the value 0.13 mM estimated previously by gas chromatography.     

Analysis of Calix[4]arenes Using Nonaqueous Capillary Electrophoresis

In nonaqueous capillary electrophoresis (NACE), an organic solvent is used in place of an aqueous medium as the background solution to improve the solubility and selectivity for hydrophobic analytes. In this study, we employed NACE with UV detection for the analysis of eight calix[4]arenes. We examined the influence of several parameters—the buffer composition, the nonaqueous solvent‘s composition and proportion, and the concentration of the electrolyte of the nonaqueous buffer—on the efficiency of the electrophoretic separation. The separation was achieved through the analyte's different effective mobility via different degrees of deprotonation on the phenolic OH groups of the calix[4]arene. This deprotonation can further affect the analyte's ability to form a complex with the metal ion. The optimized background electrolyte (BGE), comprising a mixture of N‐methylformamide/acetonitrile (30:70, v/v) and 100 mM AcOH/20 mM NH₄OAc, provided rapid (<11 min) separation of the calix[4]arenes with good resolution. The relative standard deviations of the migration times for the eight analytes were all less than 1%. Within the calibration concentration range, the coefficients of determination (R²) were all greater than 0.9914. Thus, the present study demonstrated NACE can provide adequate separation for the analysis of calix[4]arenes.     

Separation of open-cage fullerenes using nonaqueous capillary electrophoresis

In this study, nonaqueous capillary electrophoresis (NACE) was used to separate three open-cage fullerenes. Trifluoroacetic acid (TFA) was used as the nonaqueous background electrolyte to change the analytes’ mobilities. The selectivity and separation efficiency were critically affected by the nature of the buffer system, the choice of organic solvent, and the concentrations of TFA and sodium acetate (NaOAc) in the background electrolyte. The optimized separation occurred using 200 mM TFA/20 mM NaOAc in MeOH/acetonitrile (10:90, v/v), providing highly efficient baseline separation of the open-cage fullerenes within 5 min. The migration time repeatability for the three analytes was less than 1% (relative standard deviation). Thus, NACE is a rapid, useful alternative to high-performance liquid chromatography for the separation of open-cage fullerenes.     

Enantioselective Separation of Basic Drugs by CE with Polygalacturonic Acid as a Novel Chiral Selector

Polygalacturonic acid, a linear high molecular weight homopolysaccharide was investigated as a chiral selector in capillary zone electrophoresis for the separation of enantiomers of basic drugs. The choices of running buffer pH and concentration of chiral selector were found to be important for the improvement of enantioselectivity. The effects of background electrolyte concentration and the capillary temperature on the separation were also examined. Enantioseparations were carried out in the acidic conditions using 1.5% polygalacturonic acid (w/v) in a 40 mM phosphate buffer under an applied voltage of 15 kV. The optimization of these separations was dependent on the nature of the analytes and could be achieved by the proper choice of experimental conditions. A brief mechanism of enantiorecognition by polygalacturonic acid was also given.     

Determination of cyclodextrins and their derivatives by capillary electrophoresis with indirect UV and conductivity detection

A fast and simple capillary electrophoretic method suitable for the determination of native alpha-, beta-, gamma-cyclodextrins, their randomly substituted tert-butyl derivatives (average degree of substitution 3.8-4.4), heptakis (2,6-di-O-methyl)- and heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin was developed. Naphthyl-2-sulfonic acid (2-NSA), 3-iodobenzoic acid (3-IBA) and (1S)-1-phenylethylamine (PHEA) were tested as selective complex forming and UV absorbing background electrolyte additives. The composition of optimized background electrolyte for the separation of uncharged cyclodextrins and their derivatives was: 15 mM 3-iodobenzoic acid titrated with tris[hydroxymethyl]aminomethane to pH 8.0, 5% (v/v) of acetonitrile. A complete resolution of mono-2-O-, mono-3-O- and mono-6-O-carboxymethyl-beta-cyclodextrin regioisomers was achieved in the optimized background electrolyte system: 40 mM PHEA titrated with 2-[N-morpholino]ethanesulfonic acid to pH 5.6. In addition to indirect UV detection a contactless conductometric detector was successfully utilized.     

Separation and migration behavior of structurally related phenothiazines in cyclodextrin-modified capillary zone electrophoresis

The influences of buffer pH and the concentration of beta-cyclodextrins (beta-CDs) on the separation and migration behavior of 13 structurally related phenothiazines in CD-modified capillary zone electrophoresis (CD-CZE) using a phosphate background electrolyte at low pH were investigated. We focused on the separation of these phenothiazines, including the enantiomers of chiral analytes, with the use of beta-CD and hydroxypropyl-beta-CD (HP-beta-CD) as electrolyte modifiers or chiral selectors at concentrations less than 8 mM. The results indicate that the interactions of phenothiazines with beta-CDs are very strong and that effective separations of 13 analytes can be achieved with addition of 0.3 mM beta-CD or 0.5 mM HP-beta-CD in a phosphate buffer at pH 3.0. Binding constants of phenothiazines to beta-CDs were evaluated for a better understanding of the interactions of phenothiazines with beta-CDs.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Factorial design of electrolyte systems for the separation of fatty acids by capillary electrophoresis

In this work, a capillary zone electrophoretic methodology using UV indirect detection (224 nm) for the analysis of fatty acids (FAs) in saponified oils is proposed. The electrolyte consisted of a 5 mmol l(-1) phosphate buffer, pH 7. containing 4 mmol l(-1) sodium dodecylbenzenesulfonate (SDBS) as chromophore, 4 mmol l(-1) dimethyl-beta-cyclodextrin and 45% acetonitrile (ACN). The composition of the electrolyte was optimized by a 2(3) factorial design with triplicate at the central point. The design established practical concentration boundaries for SDBS and ACN. In a defined concentration range of 2-4 l(-1), SDBS can certainly be used as a chromophore for indirect detection without imparting excessive baseline noise. For ACN, a suitable interval of 45-55% was found to enhance FAs solubilization without overflowing the system with bubble formation and current interruption. Additionally, the design revealed the importance of dimethyl-beta-cyclodextrin in the resolution of difficult pairs and its function as a solubilizing agent for long chain FAs. At the optimized conditions, nine FAs from C10 to C20, including mono- di- and tri-unsaturated C18 fatty acids were baseline separated in less than 10 min. The proposed method was applied to the separation of FAs in edible oils and polyunsaturated fatty acid enriched margarine. Additionally, spectral monitoring at 206 nm was used to confirm peak identity in the samples.     

Animal glues in mixtures of natural binding media used in artistic and historic objects: identification by capillary zone electrophoresis

Animal glues were often used in historic and artistic objects, e.g. as paint ground, as binders for pigments, or as adhesives. The sources were egg, casein, or different collagens. For restoration and conservation purposes it is important to know which kind of animal glue a museum object contains. Capillary electrophoresis can deliver such information, because it enables differentiation among the three proteinaceous glue classes according to their different amino acid patterns after hydrolysis. This work deals with the most relevant problem in practice, whether this identification is obstructed by the presence of other binders, with which they are mixed in many real samples; in particular, interference from plant gums and drying oils was investigated. Capillary electrophoresis of the hydrolysates (after reaction with 6 mol L^–1 HCl) was performed with an acidic background electrolyte consisting of chloroacetic acid (51.9 mmol L^–1) adjusted with LiOH to pH 2.26. The underivatised analytes were detected with a contactless conductivity detector. It was found that the constituents of the plant gums (monosaccharides) or drying oils (long-chain fatty acids and short-chain dicarboxylic acids) never interfered with identification of the animal glues, as shown for artificial mixtures of the different binders even at tenfold excess over the animal glue, and for egg tempera samples. The method was used to identify the filling material from a statue from the eighteenth century.     

卤代乙酸及其结构相近化合物的高效毛细管电泳分离

氟、氯、溴等卤代乙酸是结构非常相近的离子型化合物,对它们的分离测定比较困难。用高效毛细管电泳法在碱性或酸性缓冲液条件下可将它们分离。在酸性缓冲液条件下,可提高有机酸分离的选择性。较低的操作电压有利于提高阴离子的分离度,而改变温度对分离度的影响不大。     

Brompheniramine as a novel probe for indirect UV detection and its application for the capillary electrophoresis of adamantane drugs

Brompheniramine, an antihistamine drug, was employed as a novel UV probe for capillary electrophoresis with indirect UV detection of adamantane drugs (memantine, amantadine, and rimantadine). The probe possesses high molar absorptivity of 24 × 10³ L/mol cm at 6 mM, which enables the measurement of these nonchromophore analytes without derivatization. The simple background electrolyte (10 mM sodium dihydrogen phosphate (pH 5.0) containing 5 mM brompheniramine and 6 mM β‐cyclodextrin) provided the separation of the analytes in a short time (7.5 min). Under these conditions, brompheniramine had similar mobility to that of the analyte ions resulting in symmetric peaks with minimal electrodispersion. The analytes displace the probe at a one‐to‐one ratio with transfer values close to unity. β‐Cyclodextrin played a role in the resolution of the structurally similar adamantane derivatives. Method validation showed good linearity (r ² > 0.98), precision (%RSD ≤ 3.30), and accuracy (recoveries ranging from 98 to 109%). The proposed method was successfully applied to determine the adamantane content in pharmaceutical products.     

Enantioselective Separation of Basic Drugs by CE with Polygalacturonic Acid as a Novel Chiral Selector

Polygalacturonic acid, a linear high molecular weight homopolysaccharide was investigated as a chiral selector in capillary zone electrophoresis for the separation of enantiomers of basic drugs. The choices of running buffer pH and concentration of chiral selector were found to be important for the improvement of enantioselectivity. The effects of background electrolyte concentration and the capillary temperature on the separation were also examined. Enantioseparations were carried out in the acidic conditions using 1.5% polygalacturonic acid (w/v) in a 40 mM phosphate buffer under an applied voltage of 15 kV. The optimization of these separations was dependent on the nature of the analytes and could be achieved by the proper choice of experimental conditions. A brief mechanism of enantiorecognition by polygalacturonic acid was also given.

     

Separation of amino acids in plant tissue extracts by capillary zone electrophoresis with indirect UV detection using aromatic carboxylates as background electrolytes

Summary Amino acids in extracts of plant tissue were separated and detected by capillary zone electrophoresis (CZE) with indirect UV detection. Various aromatic carboxylates such as salicylate, benzoate, phthalate and trimellitate were investigated as background electrolytes (BGEs). A BGE of benzoate gave the best resolution and detector response. Amino acids were separated at a highly alkaline pH to charge amino acids negatively. Separation was achieved by the co-electroosmotic flow (Co-EOF) by the addition of the cationic surfactant myristyltrimethyl-ammonium bromide (MTAB) to the electrolyte. The condtions affecting the separation of amino acids, including electrolyte pH, concentrations of both benzoate and MTAB, were investigated and optimised. Separation of a mixture of 17 amino acids at pH 11.20 with indirect UV detection at 225 nm was achieved with a BGE of 10 mM benzoate containing 1.0 mM MTAB at pH of 11.20. Detection limits ranged between 10 and 50 μM. The proposed method was demonstrated by the determination of amino acids in extracts of Eucalypt leaves with direct injection of samples.     

Determination of amino acids in tobacco samples by capillary electrophoresis/indirect absorbance detection with isolation of the electrolysis compartment and p-Aminobenzoic acid as a background electrolyte.

A fast, convenient and sensitive method of capillary zone electrophoresis (CZE) and indirect UV detection was proposed for the determination of 16 amino acids. p-Aminobenzoic acid (PAB) was selected as a background electrolyte (BGE). An isolated cell included a BGE buffer part and an electrode buffer one, which were jointed with a glass frit. The isolated cell can prevent PAB from the electrode reaction and improve the stability of the detection baseline. The separation conditions of amino acids were investigated, such as different BGEs, BGE concentration, buffer pH and electroosmotic flow (EOF) modifiers. Under the selected separation conditions, 14 amino acid peaks could be separated in 12 min. The detection limits of the amino acids were in the range of 1.7 - 4.5 micromol/L. The isolated cell is suitable for reagents reacting on the electrodes in capillary electrophoresis. The proposed method has been successfully applied to the determination of the amino acids in tobacco samples.