Dynamics of chelation-supercritical fluid extraction from wood fibers

The dynamics of supercritical fluid extraction (SFE) of the metal content of wood fibers chelated with lithium bis(trifluoroethyl) dithiocarbamate (FDDC) by supercritical (SF) CO2 was investigated experimentally by monitoring the spectra of the eluted metal complex as a function of time. The characteristic shape of the dynamic SFE curve was determined mainly by the flow conditions in the extraction vessel, the mass transfer resistance in the SF phase, and the solubility. High extraction yields of metal content were obtained in two-stage extraction including static (batch) and dynamic (semi-batch) stages. Increasing the length of the static stage increased the rate of dynamic elution of metal complex until it approached the dynamics of fluid displacement for a continuous stirred tank reactor (CSTR). In such cases, increasing the flow rate had no effect on the dynamic extraction curve when it was plotted using dimensionless time. Efficient chelation-SFE from wood fibers was obtained at a pressure of 20.3 MPa and with a static time of 30 min.     

Application of a gas-liquid entraining rotor to supercritical fluid extraction : Removal of iron(III) from water

Supercritical fluid extraction (SFE) of aqueous solutions is often limited by poor mass transport. The performance of a new gas-liquid entraining device was investigated to improve mass transport and thereby increase extraction efficiency. As a test system, iron(III) was extracted from water with a β-diketone chelating agent (HL) and supercritical fluid carbon dioxide. Metal β-diketonate complexes with sufficient solubility in supercritical fluid CO₂ are often poorly extracted from aqueous solutions due to limited mass transport between the water-soluble metal ion and the CO₂-soluble chelating agent. The new entraining device maximizes contact between the ligand-rich CO₂ phase and the metal ion-rich aqueous phase. Iron(III) was extracted from water with the chelating agent 2,2,7-trimethyl-3,5-octanedione (H(tod)) and supercritical fluid CO₂ at 60 °C and 20.8 MPa. With entrainment, 79% of the iron was removed from the aqueous phase. This represents a three-fold increase in iron extraction efficiency over that of a static system.     

Supercritical fluid clean-up of environmental samples for the analysis of polycyclic aromatic hydrocarbons using time-of-flight secondary ion mass spectrometry.

A novel sample-pretreatment method for time-of-flight secondary ion mass spectrometry (TOF-SIMS) was developed using supercritical fluid extraction (SFE). In SFE, the extraction efficiency of a certain organic matter is controlled by the pressure and temperature of supercritical CO2. Two-step SFE (1st step at 10 Mpa, 40 degrees C; 2nd step at 30 MPa, 120 degrees C) was applied to diesel exhaust particles containing many kinds of n-alkanes and aromatic species. n-Alkanes and polycyclic aromatic hydrocarbons (PAHs) were extracted in the 1st and 2nd steps, respectively. This selectivity was utilized for the sample preparation of TOF-SIMS analysis. Diesel exhaust particles after the 1st step of extraction were analyzed with TOF-SIMS, aiming at PAHs as analytical targets. The obtained spectrum was simplified, and mass peaks of individual PAHs were easily assigned, because unwanted compounds, like n-alkanes, were selectively removed by SFE. Furthermore, a simple calculation elucidated the outline of the spectrum.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.     

Effects of supercritical fluid extractions on metal ion partitioning as indicated by sequential extractions

We have studied the partitioning of stable elements and uranium to two sediments using sequential extractions (SE). These matrices were then subjected to supercritical fluid extraction (SFE) to attempt to remove the uranium. SEs were repeated on the material remaining after SFE to determine any changes in partitioning. We have confirmed that under suitable chemical conditions, ligand-assisted SFE can be used to extract many metal ions from such matrices. Under the conditions we used, the "easily leachable" metals were extracted, but the refractory metals were not. In addition, SFE appears to redistibute the remaining metal cations among the remaining geochemical after SFE treatment. Our results are presented and discussed in the context of developing decontamination strategies for contaminated soils and sediments.     

Separation of divalent transition metal beta-diketonates and their adducts by supercritical fluid chromatography

A method for separation and detection of divalent transition metal beta-diketonates by adduct formation/supercritical fluid chromatography (SFC) with an open-tubular capillary column and a FID detector is described. The crystal structures of copper (Cu)-hexafluoro-acetylacetone (HFA) and Cu bis(2,2,6,6-tetramethyl-3,5-heptanedionato) (THD) complexes have been determined by X-ray crystallography. The SFC behavior of Cu beta-diketonates shows a strong correlation with the structure of the complexes. The hydrated cu beta-diketonate complexes usually exhibit strong intermolecular interactions or decomposition in SFC. Formation of adducts with a neutral donor, such as tributyl phosphine oxide (TBPO), can greatly improve the SFC behavior and detection sensitivity of Cu(II) and Mn(II) beta-diketonates. The stoichiometry and thermal stability of the adducts Cu(II) and Mn(II) beta-diketonates with TBPO in supercritical CO(2) have also been investigated. The implications of utilizing adduct formation for supercritical fluid extraction (SFE) of divalent transition metals and for on-line coupled SFE/SFC analysis of divalent transition metals are discussed.     

Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

Supercritical fluid extraction of nylon 6,6 oligomers and their characterization via liquid chromatography coupled with mass spectrometry.

This research extends previous studies regarding the application of supercritical fluid extraction (SFE) for the analysis of oligomers from nylon 6,6 fibers. The effects of CO2 pressure, extraction temperature, CO2-modifier percentage, static extraction time and dynamic extraction time on the SFE efficiency of nylon 6,6 oligomers were examined. Results from the SFE methods for oligomer extractions were compared to results from conventional solvent extraction. The extracted oligomers were identified by high-performance liquid chromatography (HPLC) with coupled on-line atmospheric pressure chemical ionization mass spectrometry and HPLC fractionation coupled with off-line liquid secondary ion mass spectrometry.     

Rhodium and palladium β-diketonate determination with on-line supercritical fluid extraction-high performance liquid chromatography via solid phase extraction

 An on-line system of supercritical fluid extraction (SFE) and high performance liquid chromatography (HPLC) via solid phase extraction (SPE) is described for the determination of palladium and rhodium 2,2,6,6-tetramethyl-3,5-heptanedione-(thd) as well as rhodium-acetylacetonate-(acac) and benzylacetonate-(bzac) chelates. The chelates were extracted with supercritical CO₂ from sand and humic acid, concentrated on SPE cartridges and analysed with HPLC. Two cartridge materials were tested and compared to off-line trapping. The percentage of the breakthrough and cartridge retained material were measured in liquid dichloromethane. The SFE conditions could be optimized to separate metal chelates during the extraction. The supercritical fluid (SF) behaviour of different ligands on rhodium were investigated. Received: 19 July 1996/Revised: 11 December 1996/Accepted: 14 December 1996     

Optimization of supercritical fluid extraction-gas chromatography of methylmercury in marine samples

Two-level factor designs were used to optimize the supercritical fluid extraction (SFE) of methylmercury (Me---Hg) in marine samples, which were subsequently analysed by gas chromatography-electron capture detection (GC-ECD). Several variables potentially affect to extraction efficiency and kinetics. The factors studied were: CO₂ flow-rate and density, extraction cell temperature, static extraction time, nozzle and trap temperature, amount of hydrochloric acid and contact time between the acid and the sample before to extraction. The extraction kinetics was studied in all experiments by splitting extracts at 2, 7, 17 and 37 min. The results suggest that only the extraction cell temperature is statistically significant. The optimized SFE procedure to extract Me---Hg was validated by means of three available reference materials having certified methylmercury content.     

Applications of On-Line SFE/SFC in Environmental Analysis

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorinated Pesticides (OCPs) on different absorbents were extracted and analyzed by a directly coupled supercritical fluid extraction and supercritical fluid chromatography system (on-line SFE/SFC). The influence of various absorbents as sample matrixes on extraction efficiencies was evaluated. In general, the extraction efficiencies were decreased if a matrix had a larger surface area and a smaller pore size. The recoveries of PAHs and PCBs were decreased in inverse proportion to their molar mass. Recoveries of OCPs containing epoxy functional groups were greater than for OCPs lacking this functional group. In conclusion, online SFE/SFC is a rapid (1-2 h) and high recovery (70%-100%) analytical technique.     

Study on a New Method of Extraction of Metal Ions from Solid Matrices by Supercritical Fluid

TOdate.mostofthepublishedSFEworkshavefocusedonorganiccompound',andsomereportshaverelatedtoSFEofmetalions2.DirectextractionofmetalionsbysupercriticalCO,ishighlyinefficient.OneapproachofextractingmetalionsbysupercriticalCO=issuggestedtoconvertthechargedmetalionsintoneutralmetalcomplexesbyusingchelatingagentinthesupercriticalCO,.Avarietyoforganicchelatingagentssuchasthiocarbamate,D-diketones,andcrownetherhavebeenusedinSFEofmetalions3.8Hydroxyquinolinecontainsdoublecoordinationatoms(N,O-),…     

Determination of 2,4-D and Dicamba in food crops by MEKC

Summary The determination of 2,4-D (2,4-dichlorophenoxyacetic acid) and Dicamba (2-methoxy-3,6-dichlorobenzoic acid) residues in sugar cane, rice and corn was performed by a supercritical fluid extraction (SFE) method using CO₂/acetone as extraction mix and an SFE apparatus developed in our laboratory. The extracts were cleaned up after extraction by both liquid-liquid partition and a Florisil column. Micellar electrokinetic capillary chromatography (MEKC) coupled with ultraviolet on-column detection was used for the analysis of these pesticides. The detection limits were improved by the preparation of a special detection cell with an increased pathlength that gave detection limits of ca. 0.6 pg for 2,4-D and Dicamba. Our results demonstrated that capillary electrophoresis can be a powerful new analytical tool for pesticide residue analysis.     

Determination of PAHs in dust from Shanghai by optimized SFE and GC/MS

EPA 16 priority polycyclic aromatic hydrocarbons (PAHs) were extracted from dust by supercritical fluid extraction (SFE). Parameters (pressure, temperature and time) affecting the collection efficiencies of PAHs were assessed according to the extraction efficiency, and 30 MPa, 80 degrees C and 30 min dynamic extraction time were confirmed to be the best and simplest conditions of SFE to extract 16 priority PAHs from dust. The characterization of the extracts was carried out by gas chromatography with mass detector in selective ion mode (GC/MS/SIM). Ultrasonic extraction (USE) was used as a comparison with SFE. The results showed that the SFE method has a better efficiency than USE for the extraction of PAHs in dust. With the optimized conditions of SFE, the distribution of PAHs in dust samples in urban areas of Shanghai from Mar 10, 2005 to May 28, 2005 was investigated. The results demonstrated that traffic emission, especially from gasoline engines, was the main source of PAHs in dust of Shanghai.     

Evaluation of dithiocarbamates and beta-diketones as chelating agents in supercritical fluid extraction of Cd, Pb, and Hg from solid samples

The use of four dithiocarbamates and three fluorinated β-diketones as potential chelating agents for three transition metal ions (Cd²⁺, Pb²⁺, and Hg²⁺) extracted from spiked sand and filter paper samples by supercritical fluid extraction (SFE) was investigated. The extractions were performed at 45°C and 250 atm for spiked sand samples and at 60°C and 200 atm for filter paper samples using supercritical carbon dioxide modified with 5% methanol. At 250 atm and using carbon dioxide modified with 5% methanol, the recoveries of Cd²⁺, Pb²⁺, and Hg²⁺ ions from spiked sand samples were 95% with lithium bis(trifluoroethyl)dithiocarbamate (LiFDDC) as the chelating agent; they ranged from 83–97% with diethylammonium diethyldithiocarbamate and from 87–97% with sodium di-ethyldithiocarbamate as chelating agents, and from 68–96% with trifluoracetylacetone, hexafluoroacetylacetone, and thenoylfluoroacetone as chelating agents. Ammonium pyrrolidinedithiocarbamate was not effective in the chelation SFE of Cd²⁺, Pb²⁺, and Hg²⁺ ions from either spiked sand or spiked filter paper samples under the extraction conditions used. Supercritical carbon dioxide alone gave consistently lower analyte recoveries than supercritical carbon dioxide modified with 5% methanol. The results suggest that the solubility of the metal chelate in the supercritical fluid plays a more important role than the solubility of the chelating agent in the supercritical fluid, as long as sufficient chelating agent is present in the fluid phase. Fluorination of the chelating agent, as in the case of LiFDDC, increases the solubility of the metal chelate, and subsequently enhances the extraction efficiency for the metal ions.     

Supercritical fluid extraction of isoflavones from biological samples with ultra-fast high-performance liquid chromatography/mass spectrometry

An efficient method of modifier addition for supercritical fluid extraction (SFE) of polar isoflavones was developed and yielded extraordinarily high recoveries. To find the optimal extraction conditions, a temperature and pressure optimization and modifier impact study was performed in naturally contaminated and spiked samples. Ultra-fast high-performance liquid chromatography/mass spectrometry (HPLC/MS) was used for the determination of isoflavones on an Atlantis dC18 high-speed reversed phase chromatographic column (20 x 2.1 mm, 3 microm particle size). A newly elaborated supercritical fluid extraction (SFE) procedure allowed more accurate (< 5%) and precise (< 4-7%) determination of isoflavones in biological materials. The HPLC/MS method significantly reduced analysis time with simultaneous improvement of sensitivity and detection limits. The on-column limits of detection LOD (S/N = 3) for isoflavone glycosides (daidzin, genistin, glycitin, ononin, and sissotrin) were 1.3-3.6 fmol and 0.2-1.0 fmol for aglycones (daidzein, glycitein, genistein, formononetin, and biochanin A), respectively.     

Comparison of solid-phase microextraction, supercritical fluid extraction, steam distillation, and solvent extraction techniques for analysis of volatile consituents in Fructus Amomi

Four sampling techniques, solid-phase microextraction (SPME), supercritical fluid extraction (SFE), steam distillation (SD), and solvent extraction (SE), were compared for the analysis of volatile constituents from a traditional Chinese medicine (TCM) of the dried ripe fruit of Fructus Amomi (Sha Ren). A total of 38 compounds were identified by gas chromatography/mass spectrometry. Different SFE and SPME parameters (modifier content, extraction pressure, and temperature for SFE and fibers, extraction temperature, and time for SPME) were studied. The results by SFE and SPME were compared with those obtained by conventional SD and SE methods. The results showed that SFE and SPME are better sample preparation techniques than SD and SE. Due to SFE's requirement for expensive specialized instrumentation, the simplicity, low cost, and speed of SPME make it a more appropriate technique for extraction of volatile constituents in TCMs.     

Supercritical fluid extraction of amino acids from birch (Betula pendula Roth) leaves and their liquid chromatographic determination with fluorimetric detection

A method for supercritical fluid extraction (SFE) of amino acids was adapted and optimal experimental conditions were selected for a matrix consisting of dry leaves. The matrix-dependent SFE method uses a mixture of MeOH-H(2)O-acetonitrile (10:10:1 v/v/v) as a modifier (0.5 mL in situ, 300 muL on-line) at 70 degrees C and 40 MPa and no HCl is needed as an entrainer. The amino acids were quantified using high-performance liquid chromatography with fluorimetric detection (HPLC/FLD) after gradient elution on Zorbax Eclipse AAA columns (4.6x150 mm, 3.5 mum) with aqueous Na(2)HPO(4 )buffer of pH 7.8 and ACN-MeOH-water as a mobile phase. In comparison with Soxhlet extraction, SFE gave higher recovery and selectivity, but it required longer extraction time (90 min) and it was more labor-intensive (clean-up step after the pre-concentration). Both methods should be used separately or in combination according to the matrix, number of samples, and levels of ballast compounds.     

Optimization of parameters for the supercritical fluid extraction in the determination of N-nitrosamines in rubbers

The study of the possibilities of supercritical fluid extraction (SFE) with N-nitrosamines in rubbers has been carried out. Home-made materials fortified with several N-nitrosamines were prepared in order to optimize the SFE parameters. A Plackett-Burman design was employed to evaluate the influence of those parameters to be controlled in SFE, such as pressure, temperature, static and dynamic time, restrictor temperature and volume of modifier while CO2 was used as the extraction fluid. An extra central composite design for the main factors (according to the previously obtained results) was also developed in order to refine the best supercritical conditions for the extraction of N-nitrosamines from rubbers. Gas chromatography with a nitrogen and phosphorus sensitive detector was used to achieve sensitivity and limits of detection for the concentrations expected in plastic materials. The proposed analytical method has shown to be useful in the determination of N-nitrosamines even for complex matrices.     

Supercritical fluid extraction of catechins from Cratoxylum prunifolium dyer and subsequent purification by high-speed counter-current chromatography

Supercritical fluid extraction of tea catechins including epigallocatechin-3-O-gallate (EGCG) and epicatechin-3-O-gallate (ECG) from Cratoxylum prunifolium Dyer was performed. The optimization of parameters was carried out using an analytical-scale supercritical fluid extraction (SFE) system designed in our laboratory. Then the extraction was scaled up by 100 times using a preparative SFE system under a set of optimized conditions of 40 degrees C, 25 MPa and modified CO2 with 80% ethanol aqueous solution. The combined yield of EGCG and ECG reached about 1 mg per 1 g of tea leaves where the solubility was near 1.4 x 10(-4) mass fraction of CO2 fluid. EGCG and ECG of high purity (>98%) were obtained from the crude preparative extract by high-speed counter-current chromatography.