Fertilizers applied to certified organic tomato culture

The tomato culture demands large quantities of mineral nutrients, which are supplied by synthetic fertilizers in the conventional cultivation system. In the organic cultivation system only alternative fertilizers are allowed by the certifiers and accepted as safe for humans and environment. The chemical composition of rice bran, oyster flour, cattle manure and ground charcoal, as well as soils and tomato fruits were evaluated by instrumental neutron activation analysis (INAA). The potential contribution of organic fertilizers to the enrichment of chemical elements in soil and their transfer to fruits was investigated using concentration ratios for fertilizer and soil samples, and also for soil and tomato. Results evidenced that these alternative fertilizers could be taken as important sources of Br, Ca, Ce, K, Na and Zn for the organic tomato culture.     

Chemical composition of tomato seeds affected by conventional and organic production systems

Tomato is amongst the most consumed vegetables in the world, not only for its culinary versatility but also for its high nutritional value. In the last years, consumers have shown an increased concern regarding food origin and safety. The organic tomato production has been a promising alternative for the consumer offering a safer food in relation to environmental, social and nutritional aspects. This study assessed the chemical composition of tomato seeds produced in both conventional and organic systems by INAA. The results showed significant differences (p≤0.05) in the mass fractions of Br, Cs, Eu, Fe, K, Mo, Na, Rb and Sm between both systems, indicating influence of the crop management adopted in the different tomato production systems.     

Chemical and analytical characterization of related organic impurities in drugs

A system is proposed for the classification of related organic impurities in drugs and drug products including among others (separated and non-separated) intermediates, various kinds of by-products, among them products of different side reactions, epimeric/diastereomeric, enantiomeric impurities, impurities in natural products, and finally degradation products. Examples are taken mainly from the author's own experience and from among the named impurities in the European Pharmacopoeia with focus on impurities in hydrocortisone, prednisolone, enalapril maleate, lisinopril, ethynodiol diacetate, pipecuronium bromide, cimetidine, and ethynylsteroids. The methodological aspects of impurity profiling from the detection to the identification/structure elucidation and quantitative determination of impurities are briefly summarized.This paper is Part 23 in the series "Estimation of impurity profiles of drugs and related materials". For Part 22 see ref. [1].     

Chemical equilibrium model applied to aqueous magnesium sulfate solutions

A chemical equilibrium model is described that is able to fit solution thermodynamic data over a wide range of temperature and solute concentrations. This model is used to correlate the existing Gibbs energy and enthalpy data for aqueous MgSO₄ solutions at temperatures from 273 to 423 K.To whom correspondence should be addressed.     

Chemical characterization of organic carbon dissolved in natural waters using inorganic adsorbents.

Dissolved organic carbon (DOC) in water samples from Lake Biwa was chemically characterized by two inorganic adsorbents with completely different surface characteristics. The two adsorbents were HIO (hydrous iron oxide) and SG (silica gel). Solutions of reference standard materials were analyzed concerning their adsorption behavior to HIO and SG for bovine serum albumin (BSA), fulvic acid extracted from the bottom sediments of Lake Biwa, phthalic acid, and starch. The adsorption of DOC to HIO was mainly controlled by ligand exchange and electrostatic interaction; that of SG was by electrostatic interaction. It was found that in a weak acid solution of around pH 5, BSA adsorbs to both HIO and SG, but that fulvic acid, phthalic acid and starch only show adsorption to HIO. Using these characteristics, DOC samples in natural water samples were characterized into pro-DOC, which adsorbs to both HIO and SG at pH 5, and car-DOC, which only adsorbs to HIO at pH 5. The DOC samples in Lake Biwa on October 7, 1997, at sampling sites Nb-2 and Nb-5 (south basin of Lake Biwa, the depths were about 2 and 4 m), and Ie-1 (north basin of Lake Biwa, the depth was about 75 m) were characterized. The pro-DOC has different values, depending on their sampling sites and depths, and had the maximum value of 0.42 mg C l(-1) at the surface water of Ie-1, and had the lowest values at middle to deeper water depths (0.18-0.27 mg C l(-1)). The car-DOC showed a relatively stable value at Ie-1 regardless of the depth (0.63-0.83 mg C l(-1)), and the maximum value was observed in Nb-2 and Nb-5 (1.2 and 1.3 mg C l(-1)). The ratios between car-DOC and pro-DOC concentrations were 0.2-0.5, and had different values for different sampling sites and depths. The ratios were significantly different for surface water samples where the biological activities are high and for bottom water samples where decomposition predominates.     

Sensitivity improvement of 1H-15N cross-polarization at high MAS frequency applied to NMR structural characterization of organic solids

(15)N CP/MAS solid state NMR should be a method of choice to obtain essential structural information on organic materials containing nitrogen atoms. However, the technique is generally not selected for the characterization of non-labelled chemical compounds, which represents the most common situation encountered by chemists. Actually, due to the poor sensitivity of (15)N the method is time-consuming and a very fine calibration is often a prerequisite to reach a sufficient signal/noise. The main drawback comes from the weakness of (15)N-(1)H dipolar couplings which leads to a splitting of the static Hartman Hahn condition into very narrow sideband conditions under MAS. Practically, it is more difficult to obtain a high enough CP transfer level on (15)N for the entire spectrum than on other more conventional nuclei like (13)C. An experimental investigation of the CP efficiency using the ramp and adiabatic CP transfer experiments is here proposed. Preliminary adjustments of experimental settings were first made on an (15)N-labeled substituted heterocyclic model system, and then applied to several other organic compounds. Particular attention was paid to the detection of non-protonated nitrogen atoms with a significant chemical shift anisotropy, which represented the least favourable case. It was experimentally demonstrated that, for these atoms, the adiabatic passage provided a much higher transfer level than the more conventional ramp sequence leading to an enhancement factor of up to 3.5 at a MAS frequency of 30 kHz. The resulting sensitivity rendered possible the detection of non-protonated nitrogen atoms at natural abundance with 2.5-mm rotors at 9.4 T.     

Thermogravimetry applied to characterization of SBA-15 nanostructured material

Nanoporous silica with narrow pore size distribution has attracted increasing attention as a novel material for separations and reactions involving large molecules. SBA-15 has been synthesized in an acidic medium using a triblock copolymer as template. In this work, the SBA-15 was synthesized by the hydrothermal treatment at 373 K for 48 h, of a gel with the following overall molar composition: 1.0TEOS:0.017P123:5.7HCl:193H₂O, where TEOS is tetraethyl orthosilicate and P123 is poly(ethylene oxide, propylene oxide and 1,4-dioxane). The obtained material was characterized by thermogravimetry, X-ray diffraction, infrared spectroscopy and BET surface area. A kinetic study using the model free model was accomplished in the stage of decomposition of the template (P123). The obtained value of the apparent activation energy was ca. 131 kJ mol^–1.     

The effect of organic nitrogenous compound content and different pretreatments on agricultural lignocellulosic biomass characterization methods

Considering the diverse compounds contained in lignocellulosic biomasses, especially in agricultural biomass, and the complexity of the different chemical and physical structural connections between these compounds, appropriate analytical methods must be used to characterize these biomasses. In this study, two extraction processes and two analytical methods were used to characterize the main compounds in corn stover residue before and after different pretreatments. The results of this study suggest that pretreatment and organic nitrogenous compound content greatly affect the most common extraction processes and analytical methods used for biomass characterization. For raw corn stover biomass residue, the extraction process using neutral detergent fiber solvent removed more extractives and more organic nitrogenous compounds (18.5 and 2.4%, respectively) than the combination of extractions using water and ethanol (13.4% of extractives and 1.8% of organic nitrogenous compounds). This study also showed that the different pretreatments improve the efficiency of both extraction processes and that these processes seem to be more effective with the neutral detergent solvent extraction than the combination of extractions with water and ethanol. Organic nitrogenous compounds represent a significant proportion of agricultural biomasses; therefore, insufficient organic nitrogenous compound extraction can cause interference with different characterization methods. It was observed that, for the same analytical method and with the raw biomass, the value of insoluble lignin after the extractions with water and ethanol was higher than that obtained after the extraction with the neutral detergent solvent 16.1 and 13.2%, respectively. This can be explained by the fact that there are more organic nitrogenous compounds in the samples after the extraction with water and ethanol than in the samples after the extraction with the neutral detergent solvent. This result was also observed for the pretreated samples. These results, therefore, show that the extraction step is very important because it can remove more organic nitrogenous compounds before the main compounds are characterized (lignin, carbohydrates).     

支持向量机方法预测有机物的亨利常数

以有机物摩尔体积V、偶极项π*、氢键给予体的酸性am、氢键接受体的碱性βm等四种理化参数为输入变量,利用支持向量机方法对72种有机物的亨利常数值进行了定量预测研究。研究发现,采用支持向量机方法可以实现使用较少样本数据建模,并达到较好的预测结果。支持向量方法的预测结果远优于线性回归法预测结果。     

Methodology for uranium compounds characterization applied to biomedical monitoring

Chronic exposure to uranium compounds led to the development of a methodology in order to characterize those compounds. This methodology, based on the recommendation of the I.C.R.P,¹ involves three main steps: the measurement of the uranium concentration and the particle size distribution at workstations; the characterization of the industrial compound, i.e. its physico-chemical properties; and the study of in-vitro solubility using chemical and cellular tests. Different methods for uranium analysis are presented. Results and comments on UF₄, UO₃, U₃O₈, UO₂ and U+UO₂ are given.     

Flow microcalorimetry applied to the study of chemical stability of organic compounds

This work reports on the possibility of using the LKB 2277 thermal activity monitor to study the influence of anionic, cationic and neutral surfactants on the stability of a series of an-alkyl acetates.Thermodynamic parameters as well as rate constants could be calculated.Two conclusions can be drawn: 1. The stability of esters increases with increasing concentrations of surfactants. 2. The stability of esters in the presence of surfactants increases with the chain length of the esters; the contribution of a CH₂ group to a higher stability of the esters in the presence of surfactants seems to be constant.

---

Zusammenfassung Das Kalorimeter LKB 2277 kann verwendet werden, um den Einfluss kationischer, anionischer und neutraler Tenside auf die Stabilität einer Serie von n-Alkylacetaten zu untersuchen. Thermodynamische Parameter und Geschwindigkeitskonstanten werden berechnet. Folgende Schlussfolgerungen werden gezogen: 1, Die Stabilität der Ester steigt mit zunehmender Tensidkonzentration. 2. In Gegenwart von Tensiden steigt die Stabilität mit zunehmender Kettenlänge des Esters, der Beitrag einer CH₂-Gruppe zur steigenden Stabilität des Esters scheint konstant zu sein.

---

2277 , - n- . . , - . ₂ - .

---

---

To the memory of Prof. Dr. A. Hulshoff     

Solid-state fermentation of agricultural wastes into food through pleurotus cultivation

The technical feasibility of using agricultural wastes (mango and date industry wastes) as a substrate for the cultivation ofPleurotus ostreatus NRRL-0366 is evaluated. When comparing the biological efficiency of mushroom production, the highest yield of fruiting bodies was obtained using a mixture of date waste and rice straw at a ratio (1:1) (11.96%), followed by a mixture 3:1 (11.16%). The lowest one was the mixture 2:1 (9.19%). FungusPleurotus ostreatus NRRL-0366 can also be cultivated on mango waste supplemented with rice straw at a different ratio. The best one was the 1:1 mixture (10.18%), whereas the lowest was a mixture 3:1 (6.4%). Comparing the results obtained favored the use of date waste as a substrate for growingPleurotus ostreatus NRRL-0366. Spawn was cultured on three different substrates as follows: Date waste alone (I); 1:1 (by wt) date waste and rice straw (II); 1:1:1 date waste, rice straw, and corncobs (III). Final dry weight and composition of the fruiting bodies are tabulated for the three sets of conditions. Date waste and rice straw mixture (II) is a good source of nonstarchy carbohydrate (67%) and protein (27.44%) containing amounts of essential amino acids, especially lysine and low RNA (3.81%). Elemental analysis were studied in the fruit bodies of the three media.     

Thermogravimetry applied to characterization of fly ash-based MCM-41 mesoporous materials

The thermogravimetry (TG) was used for characterization of the fly ash (FA)-based MCM-41 mesoporous materials. MCM-41 mesoporous materials were synthesized using silica extracts from different FA. The synthesis of MCM-41 from FA was carried out by the hydrothermal method using the supernatants of coal FA (in the form of sodium silicate) and cationic cetyltrimethylammonium bromide (CTAB) surfactants as the structure-directing agents. On the basis of the data obtained from the TG analysis, thermal behaviour of FA-based MCM-41 mesoporous materials was assessed. This study has established the range of temperatures corresponding to the desorption of water, decomposition of the surfactant and condensation of silanol, thereby making the overall quality assessment of FA-based MCM-41 mesoporous materials.     

Chemical structure of soil organic matter

Journal of Thermal Analysis and Calorimetry - Selective preservation belongs among the important stabilization mechanisms of soil organic matter (SOM). Conceptually, it is based on non-covalent...     

Pattern recognition applied to mineral characterization of Brazilian coffees and sugar-cane spirits

Aluminium, Ca, Cu, Fe, K, Mg, Mn, Na, Pb, S, Se, Si, Sn, Sr, and Zn were determined in coffee and sugar-cane spirit (cachaça) samples by axial viewing inductively coupled plasma optical emission spectrometry (ICP OES). Pattern recognition techniques such as principal component analysis and cluster analysis were applied to data sets in order to characterize samples with relation to their geographical origin and production mode (industrial or homemade and organically or conventionally produced). Attempts to correlate metal ion content with the geographical origin of coffee and the production mode (organic or conventional) of cachaça were not successful. Some differentiation was suggested for the geographical origin of cachaça of three regions (Northeast, Central, and South), and for coffee samples, related to the production mode. Clear separations were only obtained for differentiation between industrial and homemade cachaças, and between instant soluble and roasted coffees.     

Comparison between two INAA methods applied to chemical characterization of ancient ceramics

Two different instrumental neutron activation analysis (INAA) methods were applied to characterize chemically 74 ceramic roof tile samples, found in the town of Pella, Greece and dated back to the Hellenistic Period (3rd century B. C.). The samples were first analyzed for 17 elements with a 4 hour irradiation and two counts and then re-analyzed for 9 elements with a 1 minute irradiation and two counts of short-lived radioisotopes. The results of both methods were very similar, showing the validity of the rapid INAA method (1 min irradiation) in the study of ancient ceramics. All samples were divided into 4 chemical groups, each one representing a different tiling.     

Ionic liquid-phase organic synthesis (IoLiPOS) methodology applied to cross aldol reaction

Cross aldol reaction in task-specific ionic liquids was developed. Ionic liquid-phase bound aldehyde reacted with various ketones (acetone, cyclopentanone, and butan-2-one) with l-proline as catalyst to afford various ionic liquid-phase supported aldols in yields ranging from 81 to 99%. Detachment of the aldol in MeOH was realized by transesterification using 15% of MeONa. The structure of intermediates in each step was verified by spectroscopic analysis.