Synthesis and characterization of 4‐arm star side‐chain liquid crystalline polymers containing azobenzene with different terminal substituents via ATRP

4‐Arm star side‐chain liquid crystalline (LC) polymers containing azobenzene with different terminal substituents were synthesized by atom transfer radical polymerization (ATRP). Tetrafunctional initiator prepared by the esterification between pentaerythritol and 2‐bromoisobutyryl bromide was utilized to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) and 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate (EMAzo), respectively. The 4‐arm star side‐chain LC polymer with p‐methoxyazobenzene moieties exhibits a smectic and a nematic phase, while that with p‐ethoxyazobenzene moieties shows only a nematic phase, which derives of different terminal substituents. The star polymers have similar LC behavior to the corresponding linear homopolymers, whereas transition temperatures decrease slightly. Both star polymers show photoresponsive isomerization under the irradiation with UV–vis light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3342–3348, 2007     

Patterning on nonplanar substrates: flexible honeycomb films from a range of self-assembling star copolymers

The effect of glass transition temperature, Tg, on the self-assembly of "honeycomb" microstructures on nonplanar substrates was probed by the synthesis of a library of core cross-linked star polymers with different arm compositions. Star polymers based on poly(dimethyl siloxane), poly(ethyl acrylate), poly(methyl acrylate), poly(tert-butyl acrylate), and poly(methyl methacrylate) were synthesized by the "arm first" strategy using atom-transfer radical polymerization. Reaction conditions were optimized, and a series of high molecular weight star polymers were prepared in high yield. The glass transition temperature of the star polymers ranged from -123 to 100 degrees C which allowed the suitability for the formation of porous honeycomb-like films via the "breath figure" technique on nonplanar surfaces to be investigated. All star compositions successfully formed ordered films on flat surfaces. However, only star polymer compositions with a Tg below 48 degrees C could form homogeneous honeycomb coatings on the surface of nonplanar substrates.     

Dynamics of star branched polymers in a matrix of linear chains — a Monte Carlo study

A simple cubic lattice model of the melt of 3-arm star-branched polymers of various length dissolved in a matrix of long linear chains (n₁ = 800 beads) is studied using a dynamic Monte Carlo method. The total polymer volume fraction is equal to 0,5, while the volume fraction of the star polymers is about ten times smaller. The static and dynamic properties of these systems are compared with the corresponding model systems of isolated star-branched polymers and with the melt of linear chains. It has been found that the number of dynamic entanglements for the star polymers with arm length up to 400 segments is too small for the onset of the arm retraction mechanism of polymer relaxation. In this regime dynamics of star-branched polymers is close to the dynamics of linear polymers at corresponding concentration and with equivalent chain length. The entanglement length for star polymers appears to be somewhat larger compared with linear chains.     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of linear and star‐like poly(ε‐caprolactone)‐b‐poly{γ‐2‐[2‐(2‐methoxy‐ethoxy)ethoxy]ethoxy‐ε‐caprolactone} amphiphilic block copolymers using zinc undecylenate

Linear and star‐like amphiphilic diblock copolymers were synthesized by the ring‐opening polymerization of ε‐caprolactone and γ‐2‐[2‐(2‐methoxyethoxy)ethoxy]ethoxy‐ε‐caprolactone monomers using zinc undecylenate as a catalyst. These polymers have potential applications as micellar drug delivery vehicles, therefore the properties of the linear and 4‐arm star‐like structures were examined in terms of their molecular weight, viscosity, thermodynamic stability, size, morphology, and drug loading capacity. Both the star‐like and linear block copolymers showed good thermodynamic stability and degradability. However, the star‐like polymers were shown to have increased stability at lower concentrations with a critical micelle concentration (CMC) of 5.62 × 10^?4 g L^?1, which is less than half the concentration of linear polymer needed to form micelles. The star‐like polymeric micelles showed smaller sizes when compared with their linear counterparts and a higher drug loading capacity of doxorubicin, making them better suited for drug delivery purposes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3601–3608     

基于原子转移自由基聚合技术的偶氮苯星形液晶聚合物的合成与表征

利用原子转移自由基聚合(ATRP)技术合成了含不同端基取代基的偶氮苯三臂星形侧链液晶聚合物. 均苯三酚与2-溴异丁酰溴通过酯化反应制备三官能团引发剂, 引发偶氮苯单体6-[4-(4-甲氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(MMAzo)或6-[4-(4-乙氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(EMAzo)的ATRP反应. 利用核磁共振氢谱(¹H NMR)、凝胶色谱(GPC)、差示扫描量热法(DSC)和偏光显微镜(POM)等手段对星形聚合物进行表征. 星形聚合物的液晶性与相应均聚物相似, 但偶氮苯端基取代基的不同导致星形聚合物的液晶性差别显著. 在紫外/可见光照射下星形聚合物呈现明显的异构化转变.     

Computer Simulation of Adsorbed Polymer Chains with a Different Molecular Architecture

Simulations of simple models of polymer chains were carried out by the means of the dynamic Monte Carlo method. The model chains were confined to a simple cubic lattice. Three different chain architectures were studied: linear, star‐branched and ring chains. The polymer model chain interacted with an impenetrable surface with a simple contact attractive potential. It was found that size parameters of all these polymers obey scaling laws. The temperatures of the transitions from weakly to strongly adsorbed chain were determined. It was shown for weakly adsorbed chains that ring polymers are always ca. 50% more adsorbed than linear and star‐branched ones. The properties of adsorbed linear and star‐branched polymers are very similar in the length of chain and the strength of adsorption studied. Strongly adsorbed ring polymers are still more adsorbed but differences between all kinds of chains become less pronounced.     

What's so special about polymers? A little known organizing principle gives rise to an abundance of polymer phase transitions

We argue that if an organizing principle exists it must have to do with the linear connectivity of the monomers since this feature is what distinguishes polymers from all other materials. We then compare a linear polymer threading a pore in a membrane (PTM) with an equal number of unconnected monomers which are also allowed to transit through a pore in a membrane. The crucial difference between the two cases is that the connected monomers are distinguishable from one another by virtue of their location along the polymer chain whereas the disconnected monomers are indistinguishable. Because of this, the disconnected monomers obey the ideal gas laws while the connected monomers undergo a first-order thermodynamic phase transition! Four other phase transitions occurring in isolated linear polymer molecules are known. They are the helix to random coil (HR) transitions in biological polymers, surface adsorption (SA), polymer collapse (C), and a model of polymerization (P). These five kinds of transitions can be coupled to one another resulting in a sizable number of exactly solvable minimal models of phase transitions. There are also five classes of phase transitions in many polymers systems. The coupling of these 10 classes of transitions to each-other results in a plethora of phases. These in turn provide the basis for the many polymer structures observed in the world about us. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2612–2620, 2006     

Ionic conductivity of multiarm star polymer/LiClO4 electrolytes

A series of polymer electrolytes based on multiarm polymers and lithium salt complexes were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and impedance measurement. The relationships of conductivity with salt concentration, temperature, and arm numbers are discussed. It is suggested that the star polymer has a higher solvency and ion transfer ability on lithium salts than on linear polymers. The conductivity maximum appeared at a higher salt concentration ([EO]/[Li] = 4). Impedance measurement suggested that the optimum conductivity was 2 × 10^?4 s · cm^?1. The conductivity increased with temperature and the dependence of ionic conductivity on temperature fits the Arrhenius equation. Among the studied systems, the star polymer with a five arm number performs better than other structures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4195–4198, 2004     

The theta temperature of star polymers

We use equations derived from the blob theory to calculate the blob size and the theta temperature of star polymers. In contrast to the case of linear polymers these two parameters are calculated to depend on molecular mass for star polymers. For a given star polymer the theta temperature can be lower or higher than that of the corresponding linear polymer depending on the number and length of its branches. The results are compared with the blob model of Daoud and Cotton for star polymers. Experimental results obtained in the course of this study confirm our calculations.     

The Glass Transition Temperature and Liquid1-Liquid2 Relaxation of Star-Shaped Polystyrene

The glass transition temperature T and relaxation temperature T11 of a series of regular star-shaped polystyrenes were measured by using torsional braid analyzer(TEA) and linear dilatometer.The results showed that Tg for star-shaped polymer increases with increas-ing branching degree whan the molecular weights of branch chains arethe same,but it is lower than that of linear polystyrene with the same molecular weight.The liquid 1iquid relaxation temperature T11 and the intensity of loss peak of star polystyrene also depend on branching degree.Two-Tg transitions in star polystyrenes with DVB microgel nodule were proved by comparing two types of star polystyrenes.     

Oligo(ethylene imine)-grafted glycidyl methacrylate linear and star homopolymers: Odd–even correlated transfection efficiency

The present study aims to investigate an odd–even effect of the number of ethylene imine units in the side-groups of totally abiotic synthetic polymers on their efficiency in DNA transfection. A library of fifteen polymers was fabricated. Two star homopolymers and one linear homopolymer based on glycidyl methacrylate were synthesized and used as precursors to which five linear oligo(ethylene imine)s (OEI) were grafted. The number of ethylene imine groups of the OEIs was varied. Specifically, ethylene diamine, diethylene triamine, triethylene tetramine, tetraethylene pentamine, and pentaethylene hexamine were used. Each of these fifteen OEI-grafted polymers was evaluated in terms of their efficiency to transfer plasmid DNA encoding firefly luciferase in C2C12 mouse myoblast cells. The transfection efficiency displayed an odd-even pattern, with all OEI-grafted polymers with an odd number of ethylene imine repeating units exhibiting higher transfection efficiency compared with those possessing an even number of ethylene imine repeating units. The odd–even effect was more pronounced for the star polymers with longer arms (degree of polymerization, DP = 100), while in case of the linear polymers, the odd–even effect was only observed for the lowest polymer loading. The cytotoxicity of the OEI-grafted polymers also followed an odd–even pattern, with the OEI-grafted star polymers with an arm DP of 100 and the linear polymers clearly presenting an odd-even effect, while the cytotoxicity of the OEI-grafted star polymers with an arm DP of 20 slightly increased with the number of ethylene imine repeating units.     

Positioning a fluorescent probe at the core of a glassy star polymer for detection of local dynamics

By precisely positioning a fluorescent molecule, perylene diimide, at the branch point and the arm’s end of a star polymer via controlled atom transfer radical polymerization and click-reaction, respectively, the local dynamics is investigated by single molecule defocused fluorescence microscopy. The results expose the vast difference between the local dynamics of these two sites within the star polymer.     

AB_2型星形杂臂偶氮液晶聚合物的合成及表征

通过原子转移自由基聚合(ATRP)与ATRP衍生物化学修饰结合的方法,合成了一系列AB2型星形杂臂偶氮液晶聚合物.其中,A为聚苯乙烯,B为聚6-[4-(4′-甲氧基苯基)偶氮苯氧基己酯](PMMAZO).合成分三步进行.首先,以ATRP方法得到ω-溴聚苯乙烯活性链PS(Br).然后对PS(Br)进行化学改性,得到带两个末端溴原子的聚苯乙烯活性链PS(Br)2·最后,以PS(Br)2作为双官能团大分子引发剂,引发6-[4-(4′-甲氧基苯基)偶氮苯氧基]己酯(MMAZO)发生ATRP聚合,得到星形杂臂PS(PMMAZO)2聚合物.进一步对聚合产物进行了GPC和1H-NMR分析.结果表明合成产物是预期的星形杂臂聚合物,产物分子量可控且分子量分布狭窄.同时,以DSC和POM表征了星形杂臂聚合物的液晶性.     

Synthesis of well‐defined 7‐arm and 21‐arm poly(N‐isopropylacrylamide) star polymers with β‐cyclodextrin cores via click chemistry and their thermal phase transition behavior in aqueous solution

The syntheses of well‐defined 7‐arm and 21‐arm poly(N‐isopropylacrylamide) (PNIPAM) star polymers possessing β‐cyclodextrin (β‐CD) cores were achieved via the combination of atom transfer radical polymerization (ATRP) and click reactions. Heptakis(6‐deoxy‐6‐azido)‐β‐cyclodextrin and heptakis[2,3,6‐tri‐O‐(2‐azidopropionyl)]‐β‐cyclodextrin, β‐CD‐(N₃)₇ and β‐CD‐(N₃)₂₁, precursors were prepared and thoroughly characterized by nuclear magnetic resonance and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. A series of alkynyl terminally functionalized PNIPAM (alkyne‐PNIPAM) linear precursors with varying degrees of polymerization (DP) were synthesized via atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide using propargyl 2‐chloropropionate as the initiator. The subsequent click reactions of alkyne‐PNIPAM with β‐CD‐(N₃)₇ and β‐CD‐(N₃)₂₁ led to the facile preparation of well‐defined 7‐arm and 21‐arm star polymers, namely β‐CD‐(PNIPAM)₇ and β‐CD‐(PNIPAM)₂₁. The thermal phase transition behavior of 7‐arm and 21‐arm star polymers with varying molecular weights were examined by temperature‐dependent turbidity and micro‐differential scanning calorimetry, and the results were compared to those of linear PNIPAM precursors. The anchoring of PNIPAM chain terminal to β‐CD cores and high local chain density for star polymers contributed to their considerably lower critical phase separation temperatures (T_c) and enthalpy changes during phase transition as compared with that of linear precursors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 404–419, 2009     

Arm-first method as a simple and general method for synthesis of miktoarm star copolymers

Miktoarm star copolymers containing two or more arm species were synthesized by atom transfer radical polymerization using a simple and general "arm-first" method, that is, one-pot cross-linking a mixture of different linear macroinitiator (MI) species by a divinyl cross-linker, such as divinylbenzene. Using linear MIs with a high degree of bromine chain-end functionality, including polyacrylate, polystyrene, polymethacrylate and poly(ethylene oxide), resulted in high-yield star polymers (>90%). Characterized by liquid adsorption chromatography techniques, which separated star polymers on the basis of the chemical composition of arms, the obtained star product was proved to be miktoarm star copolymers containing two or more arm species in one molecule, instead of mixture of different homoarm star polymers. Within our investigation, the molar ratios of the arms in the miktoarm star copolymers were always in agreement with the composition of the initial MI mixture, indicating the powerful capacity of this arm-first method for synthesis of miktoarm star copolymers with potentially any molar ratios and species of the arms. By using a mixture containing five types of linear MIs with different chemical compositions, miktoarm star copolymers containing five kinds of arms were synthesized for the first time, which significantly expanded the methodologies for synthesis of miktoarm star copolymers by living polymerization techniques.     

Role of Hydrodynamic Interactions in the Deformation of Star Polymers in Poiseuille Flow

Stretching polymer in fluid flow is a vital process for studying and utilizing the physical properties of these molecules,such as DNA linearization in nanofluidic channels.We studied the role of hydrodynamic interactions(His)in stretching a free star polymer in Poiseuille flow through a tube using mesoscale hydrodynamic simulations.As increasing the flow strength,star polymers migrate toward the centerline of tube due to His,whereas toward the tube wall in the absence of His.By analyzing the end monomer distribution and the perturbed flow around the star polymer,we found that the polymer acts like a shield against the flow,leading to additional hydrodynamic drag forces that compress the arm chains in the front of the star center toward the tube axis and lift the arm chai ns at the back toward the tube wall.The balanced hydrodynamic forces freeze the polymer into a trumpet structure,where the arm chains maintain a steady strongly stretched state at high flow strength.In contrast,the polymer displays remarkably large conformational change when switching off His.Our simulation results explained the coupling between His and the structure of star polymers in Poiseuille flow.     

Synthesis and characterization of side chain liquid crystalline polymers exhibiting cholesteric and blue phases

A series of cyclosiloxane-based cholesteric liquid crystalline (LC) polymers were synthesized from a cholesteric LC monomer cholest-5-en-3-yl(3β) 4-(2-propenyloxy)benzoate and a nematic LC monomer butyl 4-[4-(2-propenyloxy)benzoxy]benzoate. All the polymers exhibit thermotropic LC properties and show cholesteric phases. Most of the polymers display four types of phase transition behaviour corresponding to glass transition, melting point, cholesteric phase-blue phase transition and clearing point. The mesophase temperature range of the blue phases are as broad as 20°C. The blue phase was confirmed by the apperance of planar textures and cubic packings. With an increase of non-chiral component in the polymers, the clearing point decreases slightly, while the glass transition and melting temperatures change little. In the reflection spectra of the polymer series the reflected wavelength broadens and shifts to longer wavelength with increase of the non-chiral component in the polymer systems, suggesting that the helical pitch P lengthens.     

Characterization of hydrophilic networks synthesized by group transfer polymerization

Group transfer polymerization was used to synthesize several series of hydrophilic random and model networks. Cationic random networks were prepared both in bulk and in tetrahydrofuran (THF) using a monofunctional initiator and simultaneous polymerization of monomer and branch units, while a bifanctional initiator was employed in THF for the synthesis of model networks comprising basic or acidic chains. Upon polymerization of the monomer, the latter initiator gives linear polymer chains with two “living” ends, which are subsequently interconnected to a polymer network by the addition of a branch unit. Homopolymer network star polymers were also synthesized in THF by a one‐pot procedure. The synthesis involved the use of a monofunctional initiator and the four‐step addition of the following reagents: (i) monomer, to give linear homopolymers; (ii) branch unit, to form “arm‐first” star polymers; (iii) monomer, to form secondary arms and give “in‐out” star polymers; and, finally (iv) branch unit again, to interconnect the “in‐out” stars to networks. Different networks were prepared for which the degree of polymerization (DP) of the linear chains between junction points was varied systematically. For all networks synthesized, the linear segments, the “arm‐first” and the “in‐out” stars were characterized in terms of their molecular weight (MW) and molecular weight distribution (MWD) using gel permeation chromatography (GPC). The degrees of swelling of both the random and model networks in water were measured and the effects of DP, pH, and monomer type were investigated.     

Synthesis of homo- amd block copolymer multi-armed methacrylic star polymers by triisobutylaluminium/tert-butlyllithium initiation

Methacrylate star polymers were prepared using the “arm-first” strategy of star polymer formation by the addition of ethylene glycol dimethacrylate to living linear poly(methacrylate) arms synthesised by a trialkylaluminium/alkyllithium initiating system Control over star molar mass is discussed for poly(methyl methacrylate) armed star polymers as is the preparation of star polymers with block copolymer arms.