Platinum-Iron(II) Oxide Sites Directly Responsible for Preferential Carbon Monoxide Oxidation at Ambient Temperature: An Operando X-ray Absorption Spectroscopy Study**

Operando X-ray absorption spectroscopy identified that the concentration of Fe²⁺ species in the working state-of-the-art Pt−FeO_x catalysts quantitatively correlates to their preferential carbon monoxide oxidation steady-state reaction rate at ambient temperature. Deactivation of such catalysts with time on stream originates from irreversible oxidation of active Fe²⁺ sites. The active Fe²⁺ species are presumably Fe⁺²O⁻² clusters in contact with platinum nanoparticles; they coexist with spectator trivalent oxidic iron (Fe³⁺) and metallic iron (Fe⁰) partially alloyed with platinum. The concentration of active sites and, therefore, the catalyst activity strongly depends on the pretreatment conditions. Fe²⁺ is the resting state of the active sites in the preferential carbon monoxide oxidation cycle.     

Rational Synthesis of Iron/Nitrogen-Doped Carbon Catalyst through a Spatial Isolation Strategy for Efficient Oxygen Reduction in Acidic and Alkaline Media

It remains challenging to rationally synthesize iron/nitrogen-doped carbon (Fe/N-C) catalysts with rich Fe−N_x atomic active sites for improved oxygen reduction reaction (ORR) electrocatalysis. A highly efficient Fe/N-C catalyst, which has been synthesized through a spatial isolation strategy, is reported. Derived from bioinspired polydopamine (PDA)-based hybrid microsphere precursors, it is a multifunctional carrier that loads atomically dispersed Fe³⁺/Zn²⁺ ions through coordination interactions and N-rich melamine through electrostatic attraction and covalent bonding. The Zn²⁺ ions and melamine in the precursor efficiently isolate Fe³⁺ atoms upon pyrolysis to form rich Fe−N_x atomic active sites, and generate abundant micropores during high-temperature treatment; as a consequence, the resultant Fe-N/C catalyst contains rich catalytically active Fe−N_x sites and a hierarchical porous structure. The catalyst exhibits improved ORR activity that is superior to and close to that of Pt/C in alkaline and acidic solutions, respectively.     

A ferric citrate derived Fe-N-C electrocatalyst with stepwise pyrolysis for highly efficient oxygen reduction reaction

Unremitting and intensive researches about efficient non-precious metal electrocatalysts are necessary for large-scale commercial applications of fuel cells, while iron and nitrogen co-doped carbon（Fe-N-C）materials has become one of the most promising electrocatalysts to replace Pt-based noble metal catalysts. However, the traditional Fe-doped ZIF with rhomb dodecahedron morphology limits the exposure of active sites and the utilization of atoms, even affecting the performance of the catalyst. H...     

Zeolitic Imidazolate Framework (ZIF)‐Derived,Hollow‐Core,Nitrogen‐Doped Carbon Nanostructures for Oxygen‐Reduction Reactions in PEFCs

The facile synthesis of a porous carbon material that is doped with iron‐coordinated nitrogen active sites (FeNC‐70) is demonstrated by following an inexpensive synthetic pathway with a zeolitic imidazolate framework (ZIF‐70) as a template. To emphasize the possibility of tuning the porosity and surface area of the resulting carbon materials based on the structure of the parent ZIF, two other ZIFs, that is, ZIF‐68 and ZIF‐69, are also synthesized. The resulting active carbon material that is derived from ZIF‐70, that is, FeNC‐70, exhibits the highest BET surface area of 262 m² g^?1 compared to the active carbon materials that are derived from ZIF‐68 and ZIF‐69. The HR‐TEM images of FeNC‐70 show that the carbon particles have a bimodal structure that is composed of a spherical macroscopic pore (about 200 nm) and a mesoporous shell. X‐ray photoelectron spectroscopy (XPS) reveals the presence of Fe‐N‐C moieties, which are the primary active sites for the oxygen‐reduction reaction (ORR). Quantitative estimation by using EDAX analysis reveals a nitrogen content of 14.5 wt. %, along with trace amounts of iron (0.1 wt. %), in the active FeNC‐70 catalyst. This active porous carbon material, which is enriched with Fe‐N‐C moieties, reduces the oxygen molecule with an onset potential at 0.80 V versus NHE through a pathway that involves 3.3–3.8 e^? under acidic conditions, which is much closer to the favored 4 e^? pathway for the ORR. The onset potential of FeNC‐70 is significantly higher than those of its counterparts (FeNC‐68 and FeNC‐69) and of other reported systems. The FeNC‐based systems also exhibit much‐higher tolerance towards MeOH oxidation and electrochemical stability during an accelerated durability test (ADT). Electrochemical analysis and structural characterizations predict that the active sites for the ORR are most likely to be the in situ generated N? FeN₂₊₂/C moieties, which are distributed along the carbon framework.     

Effect of the calcination temperature on the properties of Fe2O3/SiO2 catalysts for oxidation of hydrogen sulfide

The effect of the calcination temperature on the properties of supported iron oxide catalysts for hydrogen sulfide oxidation prepared by impregnation of silica with iron(III) nitrate has been studied. An increase in the calcination temperature was found to diminish the catalytic activity of the Fe₂O₃/SiO₂ catalysts in hydrogen sulfide oxidation. This behavior can be explained by the agglomeration of iron oxide particles and by a decrease in the surface concentration of active sites. It has been shown that an increase in the calcination temperature makes the catalyst more stable towards the sulfidation of the active component (Fe₂O₃) to the iron disulfide phase.     

A novel method with low-cost Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> to synthesize small size LiFePO<Subscript>4</Subscript> by carbothermal reduction method

The phase-pure LiFePO₄/C cathode materials have been successfully fabricated by precursor containing Fe₂O₃ coated with polyaniline through carbothermal reduction method. The polyaniline coating at Fe₂O₃ could restrict the growth of crystal and subsequently become electric carbon at higher synthesis temperature. Compared with conventional carbothermal reduction method, the sample showed a better capacity and less than 3% capacity fading after 30 cycles at various charge and discharge rate.     

Porous α-Fe_2O_3/SnO_2 nanoflower with enhanced sulfur selectivity and stability for H_2S selective oxidation

Being abundant and active,Fe_2O_3 is suitable for selective oxidation of H_2S.However,its practical application is limited due to the poor sulfur selectivity and rapid deactivation.Herein,we report a facile template-free hydrothermal method to fabricate porous α-Fe_2O_3/SnO_2 composites with hierarchical nanoflower that can obviously improve the catalytic performance of Fe_2O_3.It was disclosed that the synergistic effect between α-Fe_2O_3 and SnO_2 promotes the physico-chemical properties of α-Fe_2O_3/SnO_2 composites.Specifically,the electron transfer between the Fe~(2+)/Fe~(3+) and Sn~(2+)/Sn~(4+) redox couples enhances the reducibility of α-Fe_2O_3/SnO_2 composites.The number of oxygen vacancies is improved when the Fe cations incorporate into SnO_2 structure,which facilitates the adsorption and activation of oxygen species.Additionally,the porous structure improves the accessibility of H_2 S to active sites.Among the composites,Fe1 Sn1 exhibits complete H_2 S conversion with 100% sulfur selectivity at 220℃,better than those of pure α-Fe_2O_3 and SnO_2.Moreover,Fe1 Sn1 catalyst shows high stability and water resistance.     

Self-sacrificial template synthesis of Fe,N co-doped porous carbon as efficient oxygen reduction electrocatalysts towards Zn-air battery application

Designing highly efficient non-precious based electrocatalysts for oxygen reduction reaction（ORR） is of significance for the rapid development of metal-air batteries.Herein,a hydrothermal-pyrolysis method is employed to fabricate Fe,N co-doped porous carbon materials as effective ORR electrocatalyst through adopting graphitic carbon nitride（g-C₃ N₄） as both the self-sacrificial templates and N sources.The gC₃ N₄ provides a high concentration of unsatur...     

Chemoselective Transfer Hydrogenation of Cinnamaldehyde over Activated Charcoal Supported Pt/Fe3O4 Catalyst

A variety of spherical and structured activated charcoal supported Pt/Fe₃O₄ composites with an average particle size of ～100 nm have been synthesized by a self-assembly method using the difference of reduction potential between Pt (IV) and Fe (Ⅱ) precursors as driving force. The formed Fe₃O₄ nanoparticles (NPs) effectively prevent the aggregation of Pt nanocrystallites and promote the dispersion of Pt NPs on the surface of catalyst, which will be favorable for the exposure of Pt active sites for high-efficient adsorption and contact of substrate and hydrogen donor. The electron-enrichment state of Pt NPs donated by Fe₃O₄ nanocrystallites is corroborated by XPS measurement, which is responsible for promoting and activating the terminal C=O bond of adsorbed substrate via a vertical configuration. The experimental results show that the activated charcoal supported Pt/Fe₃O₄ catalyst exhibits 94.8% selectivity towards cinnamyl alcohol by the transfer hydrogenation of cinnamaldehyde with Pt loading of 2.46% under the optimum conditions of 120℃ for 6 h, and 2-propanol as a hydrogen donor. Additionally, the present study demonstrates that a high-efficient and recyclable catalyst can be rapidly separated from the mixture due to its natural magnetism upon the application of magnetic field.     

Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

Bio-Inspired Aerobic-Hydrophobic Janus Interface on Partially Carbonized Iron Heterostructure Promotes Bifunctional Nitrogen Fixation

Competition from hydrogen/oxygen evolution reactions and low solubility of N₂ in aqueous systems limited the selectivity and activity on nitrogen fixation reaction. Herein, we design an aerobic-hydrophobic Janus structure by introducing fluorinated modification on porous carbon nanofibers embedded with partially carbonized iron heterojunctions (Fe₃C/Fe@PCNF-F). The simulations prove that the Janus structure can keep the internal Fe₃C/Fe@PCNF-F away from water infiltration and endow a N₂ molecular-concentrating effect, suppressing the competing reactions and overcoming the mass-transfer limitations to build a robust “quasi-solid–gas” state micro-domain around the catalyst surface. In this proof-of-concept system, the Fe₃C/Fe@PCNF-F exhibits excellent electrocatalytic performance for nitrogen fixation (NH₃ yield rate up to 29.2 μg h⁻¹ mg⁻¹_cat. and Faraday efficiency (FE) up to 27.8 % in nitrogen reduction reaction; NO₃⁻ yield rate up to 15.7 μg h⁻¹ mg⁻¹_cat. and FE up to 3.4 % in nitrogen oxidation reaction).     

3D Porous Carbon Framework Stabilized Ultra‐Uniform Nano γ‐Fe2O3: A Useful Catalyst System

We present a novel strategy for the scalable fabrication of γ‐Fe₂O₃@3DPCF, a three‐dimensional porous carbon framework (PCF) anchored ultra‐uniform and ultra‐stable γ‐Fe₂O₃ nanocatalyst. The γ‐Fe₂O₃@3DPCF nanocomposites were facilely prepared with the following route: condensation of iron(III) acetylacetonate with acetylacetonate at room temperature to form the polymer precursor (PPr), which was carbonized subsequently at 800 °C. The homogeneous aldol condensation offered an ultra‐uniform distribution of iron, so that the γ‐Fe₂O₃ nanoparticles (NPs) were uniformly distributed in the 3D carbon architecture with the average size of approximate 20 nm. The Fe₂O₃ NPs were capped with carbon, so that the iron oxide maintained its γ‐phase instead of the more stable α‐phase. The nanocomposite was an excellent catalyst for the reduction of nitroarene; it gave >99 % conversion and 100 % selectivity for the reduction of nitroarenes to the corresponding anilines at 100 °C. The fabrication of the γ‐Fe₂O₃@3DPCF nanocatalyst represents a green and scalable method for the synthesis of novel carbon‐based metal oxide nanostructures.     

The sum is more than its parts: stability of MnFe oxide nanoparticles supported on oxygen-functionalized multi-walled carbon nanotubes at alternating oxygen reduction reaction and oxygen evolution reaction conditions

Successful design of reversible oxygen electrocatalysts does not only require to consider their activity towards the oxygen reduction (ORR) and the oxygen evolution reactions (OER), but also their electrochemical stability at alternating ORR and OER operating conditions, which is important for potential applications in reversible electrolyzers/fuel cells or metal/air batteries. We show that the combination of catalyst materials containing stable ORR active sites with those containing stable OER active sites may result in a stable ORR/OER catalyst if each of the active components can satisfy the current demand of their respective reaction. We compare the ORR/OER performances of oxides of Mn (stable ORR active sites), Fe (stable OER active sites), and bimetallic Mn_0.5Fe_0.5 (reversible ORR/OER catalyst) supported on oxidized multi-walled carbon nanotubes. Despite the instability of Mn and Fe oxide for the OER and the ORR, respectively, Mn_0.5Fe_0.5 exhibits high stability for both reactions.

     

Ionic Liquids as Precursors for Efficient Mesoporous Iron‐Nitrogen‐Doped Oxygen Reduction Electrocatalysts

A ferrocene‐based ionic liquid (Fe‐IL) is used as a metal‐containing feedstock with a nitrogen‐enriched ionic liquid (N‐IL) as a compatible nitrogen content modulator to prepare a novel type of non‐precious‐metal–nitrogen–carbon (M‐N‐C) catalysts, which feature ordered mesoporous structure consisting of uniform iron oxide nanoparticles embedded into N‐enriched carbons. The catalyst Fe¹⁰@NOMC exhibits comparable catalytic activity but superior long‐term stability to 20 wt % Pt/C for ORR with four‐electron transfer pathway under alkaline conditions. Such outstanding catalytic performance is ascribed to the populated Fe (Fe₃O₄) and N (N2) active sites with synergetic chemical coupling as well as the ordered mesoporous structure and high surface area endowed by both the versatile precursors and the synthetic strategy, which also open new avenues for the development of M‐N‐C catalytic materials.     

Fe2O3‐N‐doped Honeycomb‐like Porous Carbon Derived from Nature Silk Sericin as Electrocatalysts for Oxygen Evolution Reaction

A facile method is reported to form a honeycomb‐like porous nanomaterial by intercalation of iron nitrate using nature silk sericin (SS) as nitrogen and carbon source. A series of Fe₂O₃ nanoparticles anchored on Fe₂O₃‐N‐doped graphite carbon electrocatalysts (SS‐Fe) were synthesized, exhibits well‐defined pore structure and excellent oxygen evolution reaction (OER) catalytic activities. Among these materials, SS‐Fe‐0.5 shows the best performance, the overpotential of SS‐Fe‐0.5 at 10 mA · cm^–2 is 440 mV (vs. RHE) and the Tafel slope is only 68 mV · dec^–1. The results indicate that it is promising to the preparation of carbon catalyst materials using natural, renewable and abundant resources for electrocatalysis.     

三维介孔氨基三亚甲基膦酸锆的合成及其担载铁催化剂的甲醛催化氧化活性

以氧氯化锆和氨基三亚甲基膦酸(ATMP)为原料合成了一种新型介孔材料氨基三亚甲基膦酸锆(NTAZP)。使用XRD、FTIR、TG-DTA和SEM等手段对所合成的介孔材料进行了结构表征和形貌分析。然后以NTAZP为载体,用Fe(NO3)3水溶液处理,得到担载Fe3+的氨基三亚甲基膦酸锆。研究结果表明,Fe3+被吸附到载体孔道中后,NTAZP结构未被破坏,Fe3+离子与NTAZP孔壁骨架上的N发生了配位作用。铁担载NTAZP(NTAZP-Fe3+)对甲醛氧化具有良好的催化活性,催化反应条件温和,催化剂稳定性良好。以载体NTAZP担载铁还避免了Fe3+进入水体,催化剂得以回收利用,避免造成二次污染。NTAZP-Fe3+是一种高效绿色的新型小分子醛类化合物氧化催化剂。     

Highly efficient and green oxidation of alkanes and alkylaromatics with hydrogen peroxide catalysed by silver and vanadyl on mesoporous silica‐coated magnetite

A heterogeneous catalyst (FeSi/Ag/VO) based on silver and vanadyl as active sites and mesoporous silica‐coated nanospheres of magnetite (Fe₃O₄@m‐SiO₂) as support was successfully prepared by deposition of Ag nanoparticles and the covalent grafting of vanadyl(IV) acetylacetonate on Fe₃O₄@m‐SiO₂. The catalyst exhibited excellent activity for the oxidation of alkanes, benzene and alkylaromatics using green oxidant H₂O₂ and oxalic acid in acetonitrile at 60 °C.     

Scalable Synthesis of Interconnected Porous Silicon/Carbon Composites by the Rochow Reaction as High‐Performance Anodes of Lithium Ion Batteries

Despite the promising application of porous Si‐based anodes in future Li ion batteries, the large‐scale synthesis of these materials is still a great challenge. A scalable synthesis of porous Si materials is presented by the Rochow reaction, which is commonly used to produce organosilane monomers for synthesizing organosilane products in chemical industry. Commercial Si microparticles reacted with gas CH₃Cl over various Cu‐based catalyst particles to substantially create macropores within the unreacted Si accompanying with carbon deposition to generate porous Si/C composites. Taking advantage of the interconnected porous structure and conductive carbon‐coated layer after simple post treatment, these composites as anodes exhibit high reversible capacity and long cycle life. It is expected that by integrating the organosilane synthesis process and controlling reaction conditions, the manufacture of porous Si‐based anodes on an industrial scale is highly possible.     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.