Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO2

B,N-TiO₂ photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH₃ at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO₂ were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO₂ lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti³⁺ species, resulting in the decrease of photocatalytic activity in visible light.     

Quantitative XAFS/EELS analyses of nitrogen species in titanium oxide photocatalysts

With a view to rational designing of a highly functional visible-light TiO₂ photocatalyst, nitrogen atoms were doped into TiO₂ samples by an ion implantation technique which enables to control the depth and concentration of dopants. Although the absorbance in the visible-light region of the sample increased by the nitrogen doping, photocatalytic activity of the sample was not directly connected with the photo-absorbance. The N K-edge X-ray absorption near edge structure (XANES) spectrum of the photocatalytic active sample (A-cat) showed a characteristic double peak at 398 and 401 eV, and the XANES spectrum of the inactive sample (I-cat) a distinct single peak around 401 eV. These features of the XANES spectra were well reproduced by theoretical simulations based on the model where an O atom in TiO₂ was replaced by N ((N)s) for A-cat, and that of quasi NO₂ molecule ((NO₂)s) for I-cat. Therefore, we have concluded that the nitrogen atom occupying the oxygen site of TiO₂ is photocatalytic active species effective for visible light photocatalysis. In addition, the quantitative XANES/ELNES analysis has revealed that the photo-absorbance ratio of I-cat to A-cat corresponds well to the ratio of total doped nitrogen concentration rather than photocatalytic active nitrogen ((N)s) concentration. This result indicates that not only (N)s but also (NO₂)s also absorb the visible light. Thus, the absorbance in the visible-light region is not necessarily an indication of the visible-light response of a photocatalyst.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

原位碳、氮共掺杂二氧化钛空心球的制备与可见光光催化性能

在H₂O₂-HF 的乙醇-水混合溶液中, 通过水热处理碳氮化钛(TiCN)制备了碳、氮共掺杂TiO₂ 空心球(CNTH). 用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X 射线光电子能谱(XPS)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 在可见光(λ≥400 nm)照射下, 通过降解甲基蓝检测了碳、氮共掺杂TiO₂空心球的光催化活性. 结果表明, 源于TiCN中的部分碳和氮原子原位掺入了TiO₂的晶格中, 部分碳掺入TiO₂点阵的间隙中. 该材料在整个可见光区展示了增强的可见光吸收, 其带边明显红移. 光催化研究表明在强可见光吸收和独特的空心球结构的协同作用下, 碳、氮共掺杂TiO₂空心球展示了比P25更高的可见光光催化活性.     

Visible-light-sensitive N-doped TiO<Subscript>2</Subscript> photocatalysts prepared by a mechanochemical method: effect of a nitrogen source

Nitrogen-doped titanium dioxide (N-doped TiO₂) photocatalysts were prepared by a mechanochemical method by using a high-speed ball milling of P25 TiO₂ with nitrogen sources such as ammonia solution, hexamine, and urea. Visible-light absorption was determined from the onset of diffused reflectance spectrum. The photocatalytic activity of the N-doped TiO₂ was evaluated through the removal of methylene blue (MB) under visible-light irradiation. The effects of nitrogen precursors used during the mechanochemical synthesis on the catalysts’ properties, such as the effective particle size, surface area, and photocatalytic activity, were extensively investigated.     

Decomposition of rhodamine 6G in the presence of titania coupling coupled with carbon source as photocatalyst under visible light excitation

Heterogeneous photocatalytic degradation of N-containing R6G dye was achieved by visible light-activated carbon doped TiO₂ (C-TiO₂) nanoparticles, synthesized by a low-temperature wet-chemical technique using glucose as carbon source. The structural and physicochemical properties of C-TiO₂ were characterized by X-ray diffraction (XRD), Raman spectroscopy, UV-vis diffuse reflectance spectroscopy (UV-vis DRS) and FT-IR spectroscopy. Compared with the pure TiO₂, the carbon modified nanomaterials exhibited enhanced absorption in the broad visible-light region together with an apparent red shift in the optical absorption edge. The resulting carbon-doped TiO₂ catalyst was employed as an effective photocatalyst for degradation of Rhodamine 6G (R6G) in aqueous solutions under visible light irradiation (λ > 420 nm). In addition, the intrinsic mechanism of visible light-induced photocatalytic oxidation of organic compounds on the carbon-doped titania was proposed and discussed.     

Preparation and photocatalytic activity of nonmetal Co-doped titanium dioxide photocatalyst

A series of boron and sulfur co-doped titanium dioxide (TiO₂) photocatalysts were prepared by a sol-gel method using boric acid, thiourea and tetrabutyl titanate [Ti(OC₄H₉)₄] as precursors. The photoabsorbance of as-prepared photocatalysts was measured by UV–Vis diffuse reflectance spectroscopy (DRS), and its microstructure was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and N₂ adsorption-desorption measurements. The prepared photocatalysts consisted of the anatase phase mainly in the form of spherical particles. The photocatalytic performance was studied by photodegradation of methyl blue (MB) in water under UV and visible light irradiation. The calcination temperature and the codoping content influenced the photoactivity. The synergistic effect of boron and sulfur co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of codoped TiO₂ was also confirmed, the photocatalytic activity of TiO₂ remained above 91% of that of the fresh sample after being used four times. It was shown that the co-doped TiO₂ could be activated by visible light and could thus be potentially applied for the treatment of water contaminated by organic pollutants.     

Photocatalytic Activity for Water Decomposition to Hydrogen over Nitrogen‐doped TiO2 Nanoparticle

Nitrogen-doped TiO2 nanoparticle photocatalysts were obtained by an annealing method with gaseous ammonia and nitrogen. The influence of dopant N on the crystal structure was characterized by XRD, XPS, BET, TEM and UV-Vis spectra. The results of XRD indicate that, the crystal phase transforms from anatase to rutile structure gradually with increase of annealing temperature from 300 to 700 ℃. XPS studies indicate that the nitrogen atom enters the TiO2 lattice and occupies the position of oxygen atom. Agglomeration of particles is found in TEM images after annealing. BET results show that the specific surface areas of N-doped samples from 44.61 to 38.27 m2/g are smaller than that of Degussa TiO2. UV-Vis spectra indicate that the absorption threshold shifts gradually with increase of annealing temperature, which shows absorption in the visible region. The influence of annealing condition on the photocatalytic property has been researched over water decomposition to hydrogen, indicating that nitrogen raises the photocatalytic activity for hydrogen evolution, and the modified TiO2 annealed for 2 h at 400 ℃ under gas of NH3/N2 (V/V＝1/2) mixture shows better efficiency of hydrogen evolution. Furthermore, the N-doped TiO2 nanoparticle catalysts have obvious visible light activity, evidenced by hydrogen evolution under visible light (λ＞400 nm) irradiation. However, the catalytic activity under visible light irradiation is absent for Degussa as reference and the N-doped TiO2 annealed at 700 ℃.     

Cu-grafted TiO2 photocatalysts: effect of Cu on the action spectrum of composite materials

This paper describes a simple technique for the modification of titania with copper to enhance its photocatalytic performance. In addition to the absorption of UV light resulted in band-to-band excitation of electrons, TiO₂ grafted with copper species absorbs radiation in the visible region of spectrum, and it is able to completely oxidize volatile organic pollutants both under UV and visible light. The action spectra of pristine and Cu-grafted TiO₂ photocatalysts are measured and discussed to elucidate the reasons for appearance of the activity under visible light.     

Fullerol–Titania Charge‐Transfer‐Mediated Photocatalysis Working under Visible Light

The development of visible‐light‐active photocatalysts is being investigated through various approaches. In this study, C₆₀‐based sensitized photocatalysis that works through the charge transfer (CT) mechanism is proposed and tested as a new approach. By employing the water‐soluble fullerol (C₆₀(OH)_x) instead of C₆₀, we demonstrate that the adsorbed fullerol activates TiO₂ under visible‐light irradiation through the “surface–complex CT” mechanism, which is largely absent in the C₆₀/TiO₂ system. Although fullerene and its derivatives have often been utilized in TiO₂‐based photochemical conversion systems as an electron transfer relay, their successful photocatalytic application as a visible‐light sensitizer of TiO₂ is not well established. Fullerol/TiO₂ exhibits marked visible photocatalytic activity not only for the redox conversion of 4‐chlorophenol, I^?, and Cr^VI, but also for H₂ production. The photoelectrode of fullerol/TiO₂ also generates an enhanced anodic photocurrent under visible light as compared with the electrodes of bare TiO₂ and C₆₀/TiO₂, which confirms that the visible‐light‐induced electron transfer from fullerol to TiO₂ is particularly enhanced. The surface complexation of fullerol/TiO₂ induced a visible absorption band around 400–500 nm, which was extinguished when the adsorption of fullerol was inhibited by fluorination of the surface of TiO₂. The transient absorption spectroscopic measurement gave an absorption spectrum ascribed to fullerol radical cations (fullerol^.+) the generation of which should be accompanied by the proposed CT. The theoretical calculation regarding the absorption spectra for the (TiO₂ cluster+fullerol) model also confirmed the proposed CT, which involves excitation from HOMO (fullerol) to LUMO (TiO₂ cluster) as the origin of the visible‐light absorption.     

Simple preparation of Mn–N-codoped titania photocatalyst with visible light response

Mn–N-codoped TiO₂ nanocrystal photocatalysts responsive to visible light were synthesized for the first time by a simple hydrothermal synthesis method. X-ray powder diffraction (XRD) measurement indicated that all the photocatalysts have an anatase crystallite structure, and that increase of the doping concentration had little effect on the structure and particle size. Compared to N-doped TiO₂, a shift of the absorption edge of Mn–N-codoped TiO₂ to a lower energy and a stronger absorption in the visible light region were observed. The Mn–N-codoped TiO₂ showed higher photocatalytic reactivity than undoped TiO₂ or N-doped TiO₂ for the photodegradation of rhodamine B (RhB) under visible light irradiation. The highest photocatalytic activity was achieved on 0.4 mol% Mn–N–TiO₂ calcined at 673 K.     

Preparation,Characterization and Photocatalytic Activity of Lanthanum Doped Mesoporous Titanium Dioxide

Lanthanum doped mesoporous titanium dioxide photocatalysts with different La content were synthesized by template method using tetrabutyltitanate (Ti(OC₄H₉)₄) as precursor and Pluronic P123 as template. The catalysts were characterized by thermogravimetric dif-ferential thermal analysis, N₂ adsorption-desorption measurements, X-ray diffraction, and UV-Vis adsorption spectroscopy. The effect of La³⁺ doping concentration from 0.1% to 1% on the photocatalytic activity of mesoporous TiO₂ was investigated. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of about 10 nm with high surface area of 165 m²/g. X-ray photoelectron spectroscopy measurements in-dicated the presence of C in the doped samples in addition to La. Compared with pure mesoporous TiO₂, the La-doped samples extended the photoabsorption edge into the visible light region. The results of phenol photodecomposition showed that La-doped mesoporous TiO₂ exhibited higher photocatalytic activities than pure mesoporous TiO₂ under UV and visible light irradiation.     

Dependence of nitrogen doping on TiO2 precursor annealed under NH3 flow

N-doped TiO₂ photocatalysts were prepared by annealing two different precursors, P25 and a TiO₂ xerogel powder under NH₃/Ar flow at 500, 550, and 600 °C. The xerogel powder prepared by peptizing Ti(OH)₄ with HNO₃ was composed of nanoparticles and had large specific surface area. During the annealing process, the xerogel powder underwent increase in crystallinity, grain growth and phase transformation, whereas P25 did not show obvious changes. Compared with the N-doped TiO₂ photocatalysts from P25, the N-doped TiO₂ photocatalysts from the xerogel powder possessed higher concentrations of the substitutional nitrogen and exhibited more obvious absorption in the visible light region. The N-doped TiO₂ photocatalysts from the xerogel powder exhibited obvious visible-light activities for photodegrading methylene blue and the sample prepared at 500 °C achieved the best performance with a rate constant (k) about 0.44 h⁻¹, whereas those from P25 did not exhibit improved visible-light activities.     

磁性BiVO4可见光催化材料的制备及光催化性能

采用水相沉淀法,以Fe3O4粒子为核心,令BiVO4沉淀附着于其上,制备了一种更易于从溶液中分离的磁性BiVO4可见光催化材料,以XRD、SEM、UV-Vis DRS、低温氮吸附-脱附等对其进行了表征。结果表明制备的磁性BiVO4为单斜白钨矿型,颗粒呈片状,粒径比普通BiVO4有所增大,在可见光区的吸收更强,吸收边红移程度随Fe3O4含量增加而增大,但比表面积并没有明显改变。并以可见光(λ≥400 nm)为光源,以亚甲基蓝溶液模拟染料废水,考察了其可见光催化活性,发现与纯BiVO4相比,磁性BiVO4具有更为良好的催化性能。通过考察各催化剂的DRS图谱以及暗反应后亚甲基蓝的浓度,发现这种降解效率上的提高是禁带宽度(Eg)降低、可见光吸收增加和对亚甲基蓝吸附量增大综合作用所导致的。这种吸附量的提升与比表面积无关,本工作以等电点的影响来解释此原因。     

N掺杂可见光化催化剂的研究

The N-doped, yellow colored titanium oxide photocatalysts were prepared with Ti(SO4)2 and NH4HCO3 as precursors by precipitation method. The photocatalytic ability under the irradiation of UV or visible light for the catalysts prepared was studied by degradation of styphnic acid. The materials were characterized by EDS, XRD, FTIR, UV-Vis DRS, and XPS. The results indicate that the photocatalytic ability of catalysts is improved, especially the ability of visible light response. The results of UV-Vis DRS show that the response wavelength range of N-dopped nitrogen is red shifted, the absorption region is expanded to 476 nm.     

Au nanorods decorated TiO2 nanobelts with enhanced full solar spectrum photocatalytic antibacterial activity and the sterilization file cabinet application

TiO₂ photocatalysts have been widely studied and applied for removing bacteria, but its antibacterial efficiency is limited to the ultraviolet (UV) range of the solar spectrum. In this work, we use the gold (Au) nanorods to enhance the visible and near-infrared (NIR) light absorption of TiO₂ NBs, a typical UV light photocatalyst, thus the enhancement of its full solar spectrum (UV, visible and NIR) photocatalytic antibacterial properties is achieved. Preliminary surface plasmon resonance (SPR) enhancement photocatalytic antibacterial mechanism is suggested. On one hand, transverse and longitudinal SPR of Au NRs is beneficial for visible and NIR light utilization. On the other hand, Au NRs combined with TiO₂ NBs to form the heterostructure, which can improve the photogenerated carrier separation and direct electron transfer increases the hot electron concentration while Au NRs as the electron channel can well restrain charge recombination, finally produces the high yield of radical oxygen species and exhibits a superior antibacterial efficiency. Furthermore, we design a sterilization file cabinet with Au NR/TiO₂ NB heterostructures as the photocatalytic coating plates. Our study reveals that Au NR/TiO₂ NB heterostructure is a potential candidate for sterilization of bacteria and archives protection.     

Preparation of the visible light responsive TiO2 thin film photocatalysts by the RF magnetron sputtering deposition method

TiO₂ thin film photocatalysts which could induce photoreactions under visible light irradiation were successfully developed in a single process by applying an ion engineering technique, i.e., the radio frequency (RF) magnetron sputtering deposition method. The TiO₂ thin films prepared at temperatures greater than 773 K showed the efficient absorption of visible light; on the other hand, the TiO₂ thin films prepared at around 573 K were highly transparent. This clearly means that the optical properties of TiO₂ thin films, which absorb not only UV but also visible light, can be controlled by the preparation temperatures of the RF magnetron sputtering deposition method. These visible light responsive TiO₂ thin films were found to exhibit effective photocatalytic reactivity under visible light irradiation (λ > 450 nm) at 275 K for the reductive decomposition of NO into N₂ and N₂O. From various characterizations, the orderly aligned columnar TiO₂ crystals could be observed only for the visible light responsive TiO₂ thin films. This unique structural factor is expected to modify the electronic properties of a TiO₂ semiconductor, enabling the efficient absorption of visible light.     

Core-shell structure CdS/TiO2 for enhanced visible-light-driven photocatalytic organic pollutants degradation

CdS modified mesoporous titania core-shell spheres (CdS/CS-TiO₂) with enhanced visible-light activity were synthesized by an in situ method. This method included two steps: planting CdO into the framework of anatase TiO₂ core-shell spheres and then converting it to CdS by ion-exchange. The physicochemical properties of the obtained samples were investigated by X-ray diffraction, scanning electron microscopy, transmission electronic micrograph, UV–vis diffuse reflectance spectra and nitrogen sorption. The in situ strategy resulted in CdS quantum dots highly dispersed in CS-TiO₂ without destroying the mesoporous core-shell structure. Compared with CS-TiO₂, the as-synthesized samples exhibited stronger visible-light absorption capability and greatly enhanced photocatalytic activity toward the degradation of Rhodamine B and 4-chlorophenol aqueous solution under visible light irradiation (λ > 420 nm).     

Visible‐Light Photoresponse of Gold Nanoparticles Supported on TiO2: A Combined Photocatalytic,Photoelectrochemical, and Transient Spectroscopy Study

In the context of gaining understanding on the origin of the visible‐light photoresponse of TiO₂ containing gold nanoparticles, the photocurrent spectra and photocatalytic H₂ evolution of titania (P25) and Au–P25 were compared. Whereas no photocurrent was detected upon visible‐light irradiation for either of the two photocatalysts, Au–P25 exhibited photocatalytic H₂ evolution for wavelengths between 400 and 575 nm. This contradictory behavior under visible‐light irradiation of Au–P25 was rationalized by transient absorption spectroscopy. It was suggested that photocatalytic H₂ generation results from methanol quenching of the charge‐separation state in each semiconductor nanoparticle, but the lack of photocurrent is due to the short lifetime of the charge separation, which makes interparticle charge migration for micrometric distances unlikely.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.