β-MnO2/Metal–Organic Framework Derived Nanoporous ZnMn2O4 Nanorods as Lithium-Ion Battery Anodes with Superior Lithium-Storage Performance

Nanoporous ZnMn₂O₄ nanorods have been successfully synthesized by calcining β-MnO₂/ZIF-8 precursors (ZIF-8 is a type of metal–organic framework). If measured as an anode material for lithium-ion batteries, the ZnMn₂O₄ nanorods exhibit an initial discharge capacity of 1792 mA h g⁻¹ at 200 mA g⁻¹, and an excellent reversible capacity of 1399.8 mA h g⁻¹ after 150 cycles (78.1 % retention of the initial discharge capacity). Even at 1000 mA g⁻¹, the reversible capacity is still as high as 998.7 mA h g⁻¹ after 300 cycles. The remarkable lithium-storage performance is attributed to the one-dimensional nanoporous structure. The nanoporous architecture not only allows more lithium ions to be stored, which provides additional interfacial lithium-storage capacity, but also buffers the volume changes, to a certain degree, during the Li⁺ insertion/extraction process. The results demonstrate that nanoporous ZnMn₂O₄ nanorods with superior lithium-storage performance have the potential to be candidates for commercial anode materials in lithium-ion batteries.     

Multifunctional Electrocatalytic Cathodes Derived from Metal–Organic Frameworks for Advanced Lithium-Sulfur Batteries

The rechargeable lithium-sulfur (Li-S) battery is a promising candidate for the next generation of energy storage technology, owing to the high theoretical capacity, high specific energy density, and low cost of electrode materials. The main drawbacks in the development of long-life Li-S batteries are capacity fading and the sluggish kinetics at the cathode caused by the polysulfides shuttle. These limitations are addressed through the design of novel nanocages containing cobalt phosphide (CoP) nanoparticles embedded in highly porous nitrogen-doped carbon (CoP-N-GC) by thermal annealing of ZIF-67 in a reductive atmosphere followed by a phosphidation step using sodium hypophosphite. The CoP nanoparticles, with large surface area and uniform homogeneous distribution within the N-doped nanocage graphitic carbon, act as electrocatalysts to suppress the shuttle of soluble polysulfides through strong chemical interactions and catalyze the sulfur redox. As a result, the S@CoP-N-GC electrode delivers an extremely high specific capacity of 1410 mA h g⁻¹ at 0.1 C (1 C=1675 mA g⁻¹) with an excellent coulombic efficiency of 99.7 %. Moreover, capacity retention from 864 to 678 mA h g⁻¹ is obtained after 460 cycles with a very low decay rate of 0.046 % per cycle at 0.5 C. Therefore, the combination of the CoP catalyst and polar conductive porous carbon effectively stabilizes the sulfur cathode, enhancing the electrochemical performance and stability of the battery.     

富氮掺杂碳空心纳米笼协同钴镍硫化物提升超级电容器性能

采用简单的热解-硫化两步法成功制备了一种新型的富氮掺杂碳空心纳米笼(NC)负载双元金属硫化物纳米颗粒(CoNi_xS_y)的复合材料 CoNi_xS_y/NC。该策略以丁二酮肟镍为镍源,增加了活性位点,同时前驱体 ZIF-8@Ni-ZIF-67的核壳结构为空心碳纳米笼的构建提供了可能性。这种独特的负载多金属硫化物纳米颗粒的中空结构使CoNi_xS_y/NC作为电极材料时具有更多的活性位点、更高的导电性和结构稳定性,从而使其具有较高的比容量(1 A·g^-1时比容量为629.2 F·g^-1),优异的循环稳定性(1 A·g^-1下1 000次循环测试后容量保持率为93.4%)。当将其进一步组装成对称超级电容器后,在1 A·g^-1下可提供207.2 F·g^-1的比电容,1 000圈循环稳定后的容量保持率为85.36%。     

富氮掺杂碳空心纳米笼协同钴镍硫化物提升超级电容器性能

采用简单的热解-硫化两步法成功制备了一种新型的富氮掺杂碳空心纳米笼(NC)负载双元金属硫化物纳米颗粒(CoNi_xS_y)的复合材料CoNi_xS_y/NC。该策略以丁二酮肟镍为镍源,增加了活性位点,同时前驱体ZIF-8@Ni-ZIF-67的核壳结构为空心碳纳米笼的构建提供了可能性。这种独特的负载多金属硫化物纳米颗粒的中空结构使CoNi_xS_y/NC作为电极材料时具有更多的活性位点、更高的导电性和结构稳定性,从而使其具有较高的比容量(1 A·g^-1时比容量为629.2 F·g^-1),优异的循环稳定性(1 A·g^-1下1 000次循环测试后容量保持率为93.4%)。当将其进一步组装成对称超级电容器后,在1 A·g^-1下可提供207.2 F·g^-1的比电容,1 000圈循环稳定后的容量保持率为85.36%。     

MOF-derived Core-Shell CoP@NC@TiO2 Composite as a High-Performance Anode Material for Li-ion Batteries

Transition-metal phosphides have been regarded as promising anode materials for high-energy lithium-ion batteries (LIBs) due to their high capacity and low cost. However, the mechanical pulverization and resultant capacity fade critically limit their further development. Here, we have designed an innovative core-shell CoP@NC@TiO₂ composite with an exotic rhombic dodecahedral morphology derived from ZIF-67 precursor, which combines both advantages from TiO₂ with excellent cycling stability and CoP with high capacity. The additional MOF-derived N-doped carbon framework is considered to improve the electrical conductivity and accommodate the volume expansion of CoP particles. Moreover, the outer TiO₂ shell can also buffer the mechanical stress and maintain the integrity of composite. With the unique structure, the core-shell CoP@NC@TiO₂ composite material exhibits excellent electrochemical performance with a considerable discharge specific capacity of 706.3 mAh g⁻¹ at a current density of 100 mA g⁻¹ after 200 cycles and outstanding rate capacity. Hence, our work demonstrates that this core-shell structure strategy combined with MOF-derived carbon framework could provide a practical pathway towards enhanced electrode materials for energy storage and conversion.     

One-pot hydrothermal synthesis of porous anatase TiO2 nanotube formed bundles for lithium ion battery anodes

Anatase phase of TiO₂ nanomaterial has been deemed a potential anode material for lithium ion battery (LIB) applications because of its remarkable electrochemical properties. However, TiO₂ anodes always suffer from intrinsic poor electrical conductivity and slow ion kinetics, which would restrict their practical usage. To address this issue, efficient control and design of the anatase crystal structure of TiO₂ material with desirable morphology is one of the critical approaches. In this work, a good lithium storage capability of 181 mA hr g⁻¹ at rate of 0.2C, high rate performance of 70 mA hr g⁻¹ at 20C, and excellent cyclability of 117 mA hr g⁻¹ with a capacity retention of 93% at 1C after 100 cycles and 84 mA hr g⁻¹ at 10C after 1,000 cycles are observed in an optimized porous anatase TiO₂ one-dimensional nanotube bundle nanomaterial fabricated through a simple hydrothermal process with post calcination treatment. These excellent electrochemical properties of the product can be ascribed to its anatase crystal phase, 1D nanostructure, and porous framework with a large surface area, which provide it with an efficient electrode/electrolyte contact area and a faster ion/electron diffusion pathway.     

ZIF-8 derived nano-SnO2@ZnO as anode for Zn/Ni secondary batteries

SnO₂@ZnO was synthesized by a new method involving the immobilization of Sn onto zeolitic imidazolate framework-8 (ZIF-8) followed by calcination. The synthesized nanoparticles were characterized as 20–30 nm spherical ZnO particles uniformly dotted with SnO₂. When SnO₂@ZnO were used as anode material for Zn/Ni batteries, the average specific capacity was approximately 600 mAh g^− 1 and remained stable after 150 cycles at a rate of 1 C.     

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2O4 for Low-Temperature Battery Operation

Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe₂O₄ (cl-CoFe₂O₄) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe₂O₄ can deliver a high specific capacity (1019.9 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (626.0 mAh g⁻¹ at 5 A g⁻¹), and good cyclability (675.4 mAh g⁻¹ at 4 A g⁻¹ for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe₂O₄ anode can deliver high capacities of 907.5 and 664.5 mAh g⁻¹ at 100 mA g⁻¹, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO₄ cathode exhibits a high rate performance (214.2 mAh g⁻¹ at 5000 mA g⁻¹) and an impressive cycling performance (612.7 mAh g⁻¹ over 140 cycles at 300 mA g⁻¹) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe₂O₄ is dominated by pseudocapacitive behavior, leading to fast Li⁺ insertion/extraction and good cycling life.     

Synthesis of Porous Ni-Doped CoSe2/C Nanospheres towards High-Rate and Long-Term Sodium-Ion Half/Full Batteries

Carbon-layer-coated porous Ni-doped CoSe₂ (Ni-CoSe₂/C) nanospheres have been fabricated by a facile hydrothermal method followed by a new selenization strategy. The porous structure of Ni-CoSe₂/C is formed by the aggregation of many small particles (20–40 nm), which are not tightly packed together, but are interspersed with gaps. Moreover, the surfaces of these small particles are covered with a thin carbon layer. Ni-CoSe₂/C delivers superior rate performance (314.0 mA h g⁻¹ at 20 A g⁻¹), ultra-long cycle life (316.1 mA h g⁻¹ at 10 A g⁻¹ after 8000 cycles), and excellent full-cell performance (208.3 mA h g⁻¹ at 0.5 A g⁻¹ after 70 cycles) when used as an anode material for half/full sodium-ion batteries. The Na storage mechanism and kinetics have been confirmed by ex situ X-ray diffraction analysis, assessment of capacitance performance, and a galvanostatic intermittent titration technique (GITT). GITT shows that Na⁺ diffusion in the electrode material is a dynamic change process, which is associated with a phase transition during charge and discharge. The excellent electrochemical performance suggests that the porous Ni-CoSe₂/C nanospheres have great potential to serve as an electrode material for sodium-ion batteries.     

Structural Design and Synthesis of an SnO2@C@Co-NC Composite as a High-Performance Anode Material for Lithium-Ion Batteries

To overcome the drawbacks of the structural instability and poor conductivity of SnO₂-based anode materials, a hollow core–shell-structured SnO₂@C@Co-NC (NC=N-doped carbon) composite was designed and synthesized by employing the heteroatom-doping and multiconfinement strategies. This composite material showed a much-reduced resistance to charge transfer and excellent cycling performance compared to the bare SnO₂ nanoparticles and SnO₂@C composites. The doped heteroatoms and heterostructure boost the charge transfer, and the porous structure shortens the Li-ion diffusion pathway. Also, the volume expansion of SnO₂ NPs is accommodated by the hollow space and restricted by the multishell heteroatom-doped carbon framework. As a result, this structured anode material delivered a high initial capacity of 1559.1 mA h g⁻¹ at 50 mA g⁻¹ and an initial charge capacity of 627.2 mA h g⁻¹ at 500 mA g⁻¹. Moreover, the discharge capacity could be maintained at 410.8 mA h g⁻¹ after 500 cycles with an attenuation rate of only 0.069 % per cycle. This multiconfined SnO₂@C@Co-NC structure with superior energy density and durable lifespan is highly promising for the next-generation lithium-ion batteries.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Acetic Anhydride as an Oxygen Donor in the Non-Hydrolytic Sol–Gel Synthesis of Mesoporous TiO2 with High Electrochemical Lithium Storage Performances

An original, halide-free non-hydrolytic sol–gel route to mesoporous anatase TiO₂ with hierarchical porosity and high specific surface area is reported. This route is based on the reaction at 200 °C of titanium(IV) isopropoxide with acetic anhydride, in the absence of a catalyst or solvent. NMR spectroscopic studies indicate that this method provides an efficient, truly non-hydrolytic and aprotic route to TiO₂. Formation of the oxide involves successive acetoxylation and condensation reactions, both with ester elimination. The resulting TiO₂ materials were nanocrystalline, even before calcination. Small (about 10 nm) anatase nanocrystals spontaneously aggregated to form mesoporous micron-sized particles with high specific surface area (240 m² g⁻¹ before calcination). Evaluation of the lithium storage performances shows a high reversible specific capacity, particularly for the non-calcined sample with the highest specific surface area favouring pseudo-capacitive storage: 253 mAh g⁻¹ at 0.1 C and 218 mAh g⁻¹ at 1 C (C=336 mA g⁻¹). This sample also shows good cyclability (92 % retention after 200 cycles at 336 mA g⁻¹) with a high coulombic efficiency (99.8 %). Synthesis in the presence of a solvent (toluene or squalane) offers the possibility to tune the morphology and texture of the TiO₂ nanomaterials.     

A novel hybrid electrode of zeolitic imidazolate framework–derived carbon encapsulated in reduced-TiO2 nanotube arrays: Fabrication and photoelectrocatalytic activity

Constructing high-efficient photoelectrodes is one of the promising tasks in photoelectrocatalytic (PEC) technology. Al-reduced TiO₂ nanotube arrays (R-TNTAs) exhibit distinct improved visible-light response ability in comparison with traditional TiO₂ nanomaterials. In addition, metal–organic framework (MOF)-derived porous carbon materials possess versatile advantages partly due to preserved geometry configuration of MOF. Inspired by these characteristics, in this work, we synthesized the novel hybrid electrodes of C–N (Zn)@R-TNTAs through the pyrolysis of ZIF-8@R-TNTAs at controlled temperatures, which were pre-synthesized by coating zeolitic imidazolate frameworks (ZIF-8) onto R-TNTAs. The resulting hybrid electrodes were characterized using field-emission scanning electron microscopy, powder X-ray diffraction, X-ray photoelectron spectra, and Fourier-transform infrared techniques. The EC property and PEC activity of the composite electrodes were also analyzed, and the dependence of these on the pyrolysis temperature was also explored. The results showed that the pyrolyzed carbon materials were uniformly deposited in the inner TiO₂ nanotubes and thus effectively enhanced their EC and PEC activities. The best EC and PEC capacities were obtained by C–N (Zn)@R-TNTAs (600); the maximum photocurrent density was 0.85 mA cm⁻², which is ~1.5 times that of single R-TNTAs; and the maximum H₂ evolution rate was 58.83 μmol h⁻¹ cm⁻², being ~2.3 times that of R-TNTAs. In addition, C–N (Zn)@R-TNTAs (600) exhibited the best PEC activity in the degradation of rhodamine B with excellent catalytic stability. Based on EC analyses, a possible band structure and enhanced PEC mechanism for C–N (Zn)@R-TNTAs were proposed. There are only a few reports related to reduced TiO₂ nanotubes, and this work highlights the ideas of designing the hybrid electrodes based on reduced TNTAs and MOF-derived carbon materials, which may find broad applications in PC and PEC processes.     

General Synthesis of Sulfonate-Based Metal–Organic Framework Derived Composite of MxSy@N/S-Doped Carbon for High-Performance Lithium/Sodium Ion Batteries

A general and simple strategy is realized for the first time for the preparation of metal sulfide (M_xS_y) nanoparticles immobilized into N/S co-doped carbon (NSC) through a one-step pyrolysis method. The organic ligand 1,5-naphthalenedisulfonic acid in the metal–organic framework (MOF) precursor is used as a sulfur source, and metal ions are sulfurized in situ to form M_xS_y nanoparticles, resulting in the formation of M_xS_y/NSC (M=Fe, Co, Cu, Ni, Mn, Zn) composites. Benefiting from the M_xS_y nanoparticles and conductive carbon, a synergistic effect of the composite is achieved. For instance, the composite of Fe₇S₈/NSC as an anode displays excellent long-term cycling stability in lithium/sodium ion batteries. At 5 A g⁻¹, large capacities of 645 mA h g⁻¹ and 426.6 mA h g⁻¹ can be retained after 1500 cycles for the lithium-ion battery and after 1000 cycles for the sodium-ion battery, respectively.     

Few-Layer MoS2 Nanosheets Encapsulated in N-Doped Carbon Hollow Spheres as Long-Life Anode Materials for Lithium-Ion Batteries

Two-dimensional molybdenum disulfide (MoS₂) has been recognized as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity, but its rapid capacity decay owing to poor conductivity, structure pulverization, and polysulfide dissolution presents significant challenges in practical applications. Herein, triple-layered hollow spheres in which MoS₂ nanosheets are fully encapsulated between inner carbon and outer nitrogen-doped carbon (NC) were fabricated. Such an architecture provides high conductivity and efficient lithium-ion transfer. Moreover, the NC shell prevents aggregation and exfoliation of MoS₂ nanosheets and thus maintains the integrity of the nanostructure during the charge/discharge process. As anode materials for LIBs, the C@MoS₂@NC hollow spheres deliver a high reversible capacity (747 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹) and excellent long-cycle performance (650 mA h g⁻¹ after 1000 cycles at 1.0 A g⁻¹), which confirm its potential for high-performance LIBs.     

Regulating Lithium Plating and Stripping by Using Vertically Aligned Graphene/CNT Channels Decorated with ZnO Particles

Lithium (Li) metal is regarded as the ultimate anode material for use in Li batteries due to its high theoretical capacity (3860 mA h g⁻¹). However, the Li dendrites that are generated during iterative Li plating/stripping cycles cause poor cycling stability and even present safety risks, and thus severely handicap the commercial utility of Li metal anodes. Herein, we describe a graphene and carbon nanotube (CNT)-based Li host material that features vertically aligned channels with attached ZnO particles (designated ZnO@G-CNT-C) and show that the material effectively regulates Li plating and stripping. ZnO@G-CNT-C is prepared from an aqueous suspension of Zn(OAc)₂, CNTs, and graphene oxide by using ice to template channel growth. ZnO@G-CNT-C was found to be mechanically robust and capable of guiding Li deposition on the inner walls of the channels without the formation of Li dendrites. When used as an electrode, the material exhibits relatively low polarization for Li plating, fast Li-ion diffusion, and high Coulombic efficiency, even over hundreds of Li plating/stripping cycles. Moreover, full cells prepared with ZnO@G-CNT-C as Li host and LiFePO₄ as cathode exhibit outstanding performance in terms of specific capacity (155.9 mA h g⁻¹ at 0.5 C), rate performance (91.8 mA h g⁻¹ at 4 C), cycling stability (109.4 mA h g⁻¹ at 0.5 C after 800 cycles). The methodology described can be readily adapted to enable the use of carbon-based electrodes with well-defined channels in a wide range of contemporary applications that pertain to energy storage and delivery.     

A ZIF-8 Host for Dendrite-Free Zinc Anodes and N,O Dual-doped Carbon Cathodes for High-Performance Zinc-Ion Hybrid Capacitors

Zn is a promising anode for aqueous energy storage owing to it intrinsic superior properties such as large capacity, abundant reserves, low potential and safety. But, the growth of dendrites during charge and discharge leads to a decrease in reversibility. In addition, further development of zinc-ion hybrid capacitors (ZICs) is seriously challenging because of the lack of an exceptional cathode. Herein, we use ZIF-8 annealed at 500 °C (annealed ZIF-8) as a host material for stable and dendrite-free Zn anodes. Utilization of annealed ZIF-8 results in dendrite-free Zn deposition and stripping as a result of its porous construction, which contains trace Zn. Furthermore, we firstly proposed innovative N,O dual-doped carbon which was designed by the derived ZIF-8 (ZIF-8 derived C) as cathode for high-energy and power-density ZICs. The new ZIC assembled by Zn@annealed ZIF-8 anode and ZIF-8 derived C cathode provides a capacity of 135.5 mAh g⁻¹ and an energy density of 108.4 Wh kg⁻¹ with a power density of 800 W kg⁻¹ at 1.0 A g⁻¹. In addition, it shows outstanding cycling stability of 91% capacity retention after 6000 cycles at 5.0 A g⁻¹. Moreover, the solid-state ZICs can drive LEDs and smart watches. This ZIC holds promise for the practical application of supercapacitors.     

Electrochemical Evaluation of Titanium (IV) Oxide/Polyacrylonitrile Electrospun Discharged Battery Coals as Supercapacitor Electrodes

The TiO₂ nanoparticles are electrospun with polyacrylonitrile (PAN) polymer solution onto the discharged battery coal (DBC) electrode and the results are evaluated as a supercapacitor. The morphology and chemical composition of the synthesized TiO₂ nanoparticles and PAN+TiO₂ nanocomposite fibers were characterized by Scanning electron microscopy, thermogravimetry and FTIR analysis. Supercapacitor measurements and electrochemical characterizations of the electrodes examined by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical measurements showed that the best current value was obtained from PAN and TiO₂ coated DBC. The performances of both PAN and PAN+TiO₂ coated DBC electrodes were investigated as supercapacitors. PAN+TiO₂/DBC showed the best specific capacitance value of 156.00 F g⁻¹ and PAN/DBC showed 74.93 F g⁻¹. In addition, PAN+TiO₂/DBC exhibited reliable stability performance over 2000.00 cycles.     

Boosting Na+ Storage Ability of Bimetallic MoxW1−xSe2 with Expanded Interlayers

In spite of the valuable advancements in the fabrication of transition-metal selenides (TMSs)-based hybrid structures, only single-metal selenides have been obtained through most of the present methods. Herein, a facile room-temperature self-polymerization and subsequent selenization strategy is proposed for the synthesis of bimetallic Mo_xW_1−xSe₂ nanosheets with expanded interlayers decorated with N-doped carbon-matrix assembled flowerlike hierarchical microspheres (Mo_xW_1−xSe₂/NC). Depending on the excellent coordination ability of dopamine with metal ions, self-formed flowerlike single precursors are harvested. The unique hybrid architecture benefits the penetration of the electrolyte, accelerates Na⁺ insertion/extraction kinetics, enhances electron-transfer ability, and alleviates the volume expansion and aggregation during cycling processes. Therefore, the bimetallic Mo_xW_1−xSe₂/NC electrode delivers high reversible capacities of 264 mA h g⁻¹ at 1 A g⁻¹ for 700 cycles, 204.4 mA h g⁻¹ at 4 A g⁻¹ for 1400 cycles, and 153.3 mA h g⁻¹ at 8 A g⁻¹ for 2000 cycles, as well as an excellent rate capability up to 10 A g⁻¹ with a capacity of 188.9 mA h g⁻¹. Our study offers an effective strategy to boost sodium storage performance through elaborate structural engineering.     

Graphene/Amorphous Carbon Restriction Structure for Stable and Long-Lifespan Antimony Anode in Potassium-Ion Batteries

Sb-based materials have attracted much attention owing to their ability to undergo a multi-electron alloy reaction with K⁺. However, there are still the serious problems of volume change and aggregation of particles, which lead to rapid capacity fading and a limited lifespan. In this work, a graphene/amorphous carbon restriction structure is proposed, in which the amorphous carbon layer on the surface of Sb nanoparticles can protect the particles from pulverization, and the graphene can buffer the volume change of the material. In addition, the conductive network formed by the dual carbon structure effectively improves the rate performance of the material. Thus, the material delivers a high capacity of 550 mA h g⁻¹ at 100 mA g⁻¹, a rate capability of 370 mA h g⁻¹ at 2000 mA g⁻¹, and a long lifespan of 350 cycles without significant capacity fading. The dual carbon strategy proposed offers a reference for the design of high-performance anode materials.