Characterization of rhodamine 6G aggregates intercalated in solid thin films of laponite clay. 2 Fluorescence spectroscopy

The photoluminescence response of Rhodamine 6G (R6G) laser dye intercalated into solid thin films of Laponite (Lap) clay is studied as a function of dye loading. Fluorescence spectroscopy (steady-state and time-resolved techniques) was used to characterize the R6G species adsorbed into the solid films. For very diluted R6G loadings (40% CEC), with a reminiscent fluorescence band at around 600 nm.     

Exciton trapping in pi-conjugated materials: a quantum-chemistry-based protocol applied to perylene bisimide dye aggregates

Access to excited-state structures and dynamics of pi-chromophor aggregates is needed to understand their fluorescence behavior and the properties of related materials. A quantum-chemistry-based protocol that provides quantitative and qualitative insight into fluorescence spectra has been applied to perylene bisimide dimers and provides excellent agreement with measured fluorescence spectra. Both dispersion and dipol-dipole interactions determine the preferred relative arrangements of the chromophores in ground and excited states of the dimer. An exciton trapping mechanism is identified, which may limit the energy transfer properties of perylene bisimide and other dye materials.     

The effect of chromophore-chromophore interaction on the spectral luminescent properties of oxazine dye dimers

Spectral and luminescent properties were studied for chemical dimers and molecular aggregates of Nile Red oxazine dye in solutions. Chemical bonding of two oxazine dye molecules leads to the formation of a dimer whose spectral behavior is in close agreement with the exciton model constructed for “physical” molecular aggregates. Chemical dimers luminesce, whereas dimers formed because of van der Waals interactions do not.     

Structure and physicochemical properties of cation polymethine dyes in Langmuir-Blodgett films

The physicochemical properties of monomolecular layers of amphiphilic cation polymethine dyes (i.e., thia- and oxacarbocyanines) on the surface of a water subphase are studied along with the conditions of Langmuir-Blodgett (LB) film preparation. The area occupied by one dye molecule in the liquid-stretched and liquid-condensed states of a monolayer is determined. Based on a comparison of experimental and theoretically calculated areas, the nature of dye packing in monolayers is studied by means of molecular mechanics using data from conformation analysis. The spectral and luminescent properties of cationic polymethine dyes in various media are investigated. Excimer fluorescence is observed in LB films. The excimers in LB films are found to arise not from monomers but from dye dimers. A possible mechanism of their formation is considered.     

Photoprocesses in aqueous solutions of 9-ethylthiacarbocyanine dyes in the presence of surfactants

The effect of cationic (CTAB), anionic (SDS) and neutral (Triton X-100) surfactants on the spectral and luminescence properties and photoreactions of three sulfopropyl-9-ethylthiacarbocyanine dyes (Dyes 1–3) was studied in aqueous solutions. In the absence of the surfactants, Dyes 1–3 occur in the form of an equilibrium mixture of cis-monomers and dimers. Neither monomers nor dimers are capable of fluorescence and cis-trans photoisomerization, and only the dimers experience intersystem crossing into the triplet state. In the presence of any of the surfactants at a concentration below the critical micelle concentration, the dimers undergo disaggregation; it is only in the presence of CTAB that the formation of a J-aggregate—which dissociates into monomers with an increase in the CTAB concentration—takes place. As the surfactant concentration increases, dye fluorescence appears, which is accompanied by a decrease in the yield of the dimer triplet state, and the amenability of the thiacarbocyanine monomers to cis-trans photoisomerization and transition to the triplet state is observed. The spectral effects observed are related to the conversion of the cis-form of the monomer to the trans-form upon solubilization of the dye molecules.     

Intriguing H-aggregate and H-dimer formation of coumarin-481 dye in aqueous solution as evidenced from photophysical studies

Photophysical properties of coumarin-481 (C481) dye in aqueous solution show intriguing presence of multiple emitting species. Concentration and wavelength dependent fluorescence decays and time-resolved emission spectra and area-normalized emission spectra suggest the coexistence of dye monomers, dimers, and higher aggregates (mostly trimers) in the solution. Because of the efficient intramolecular charge transfer (ICT) state to twisted intramolecular charge transfer (TICT) state conversion, the dye monomers show very short fluorescence lifetime of ~0.2 ns. Fluorescence lifetimes of dimers (~4.1 ns) and higher aggregates (~1.4 ns) are relatively longer due to steric constrain toward ICT to TICT conversion. Observed results indicate that the emission spectra of the aggregates are substantially blue-shifted compared to monomers, suggesting H-aggregation of the dye in the solution. Temperature-dependent fluorescence decays in water and time-resolved fluorescence results in water-acetonitrile solvent mixtures are also in support of the dye aggregation in the solution. Though dynamic light scattering studies could not recognize the dye aggregates in the solution due to their small size and low concentration, fluorescence up-conversion measurements show a relatively higher decay tail in water than in water-acetonitrile solvent mixture, in agreement with higher dye aggregation in aqueous solution. Time-resolved fluorescence results with structurally related non-TICT dyes, especially those of coumarin-153 dye, are also in accordance with the aggregation behavior of these dyes in aqueous solution. To the best of our knowledge, this is the first report on the aggregation of coumarin dyes in aqueous solution. Present results are important because coumarin dyes are widely used as fluorescent probes in various microheterogeneous systems where water is always a solvent component, and the dye aggregation in these systems, if overlooked, can easily lead to a misinterpretation of the observed results.     

Fluorescent hydrophobic zippers inside duplex DNA: interstrand stacking of perylene-3,4:9,10-tetracarboxylic acid bisimides as artificial DNA base dyes

Perylene-3,4:9,10-tetracarboxylic acid bisimides (PBs) were incorporated synthetically into oligonucleotides by using automated DNA building-block chemistry. The 2'-deoxyribofuranoside of the natural nucleosides was replaced by (S)-aminopropan-2,3-diol as an acyclic linker between the phosphodiester bridges that is tethered to one of the imide nitrogen atoms of the PB dye. The S configuration of this linker was chosen to mimic the stereochemical situation at the 3'-position of the natural 2'-deoxyribofuranosides. By using this strategy, up to six PB dyes were incorporated in the middle of 18-mer DNA duplexes by using interstrand alternating sequences of PBs with thymines or an abasic site analogue. Both PB dimers and PB hexamers as artificial base substitutions inside the duplexes yield characteristic excimer-type fluorescence. The stacking properties of the PB chromophores are modulated by the presence or absence of thymines opposite the PB modification site in the counterstrand. The interstrand PB dimers can be regarded as hydrophobically interacting base pairs, which display a characteristic fluorescence readout signal. Hence, for the PB hexamers, we proposed a zipperlike recognition motif that is formed inside duplex DNA. The PB zipper shows characteristic excimer-type emission as a fluorescence readout signal for the pairing interaction.     

Solvent polarity induced structural changes in 2,6-diamino-9,10-anthraquinone dye

Photophysical properties of 2,6-diamino-9,10-anthraquinone (2,6-DAAQ) dye have been investigated in different solvents and solvent mixtures. The fluorescence quantum yields, fluorescence lifetimes, radiative rate constants, nonradiative rate constants and absorption and fluorescence spectral characteristics show unusual deviations in the lower polarity aprotic solvents in comparison to those in other aprotic solvents of medium to higher polarities. The results indicate that the dye exists in different structural forms in the lower and in the medium to higher polarity solvents. Drawing an analogy with the results reported for other amino-substituted dyes, it is inferred that 2,6-DAAQ dye adopts a planar intramolecular charge transfer (ICT) structure in medium to higher polarity solvents, where the amino lone pairs are in good resonance with the anthraquinone pi-cloud. In the lower polarity solvents, however, the dye is inferred to exist in a nonplanar structure where the amino lone pairs are not in good resonance with the anthraquinone pi-cloud. Due to these structural differences, the dye displays significantly different photophysical behavior in the lower polarity solvents than in the other solvents of medium to higher polarities. Supportive evidence for the above structural changes has been obtained from ab initio quantum chemical calculations on the structures of the dye under different conditions. Unusual deviations in the photophysical properties of 2,6-DAAQ dye in protic solvents in comparison to those in aprotic solvents of similar polarities are attributed to the intermolecular hydrogen bonding effect involving the OH groups of the protic solvents and the quinonoid oxygens of the dye.     

The synthesis and spectral properties of a stimuli-responsive D-π-A charge transfer dye

A new donor-π-acceptor (D-π-A) type isophorone dye was synthesized by the condensation reaction between 2-(3,5,5-trimethylcyclohex-2-enylidene)-malononitrile and indole-3-carboxaldehyde. The chemical structure of the dye was characterized by 1H NMR, EA and MS. A novel, chromogenic, fluorescent dye based on indol as donor unit and isophorone as acceptor unit displayed marked UV-visible absorption changes and highly selective fluorescence quenching in the presence of fluoride ion. The dye also exhibited sizeable colour changes when used as a pH-induced molecular switch and as a detector for volatile organic compounds. The absorption and fluorescent intensity of the dye can be reversibly selected by protonation/deprotonation of the amine moiety via control of intramolecular charge transfer (ICT), leading to a molecular switch with "on" and "off" states.     

Specificity of photonics of 3,3′-diethyl-5,5′-dichloro-9-ethylthiacarbocyanine dimers in the presence of cucurbit[7]uril

Molecules of 3,3′-diethyl-5,5′-dichloro-9-ethylthiacarbocyanine form dimers in aqueous solutions, which are capable of fluorescence and intersystem crossing to the triplet state. In the presence of cucurbit[7]uril and alkali metals or ammonium cations, dye dimer complexes are formed, which exhibit phosphorescence and thermally activated delayed (E-type) fluorescence in air-saturated solutions at room temperature. With the use of quantum-chemical calculations, the structure of dimeric dye complexes with cucurbit[7]uril is suggested.     

Fluorescent plasma nanocomposite thin films containing nonaggregated rhodamine 6G laser dye molecules

This letter reports a novel methodology for the synthesis of dye-containing nanocomposite thin films containing fluorescent rhodamine 6G (Rh6G) laser dye molecules. The nanocomposites are deposited in one step at room temperature in a downstream microwave plasma operating at low pressure and power. By controlling the plasma chemistry, it is possible to reduce the formation of dye dimers and higher aggregates that quench the fluorescence of the dye molecules. The films are intensely absorbent and fluorescent, insoluble in water, mechanically stable, and present good adhesion to the substrate. Besides, the method is compatible with the present silicon technology and therefore particularly interesting for the fabrication of integrated optoelectronic devices.     

Properties of a novel acid dye 1-amino-4-[(6-nitro-2-benzothiazolyl)amino]-9,10-anthraquinone-2-sulfonic acid with anti-UV capability

<正>A novel acid dye acid was synthesized by the condensation reaction between bromamine acid and 2-amino-6-nitrobenzothiazole and its anti-UV protection properties were evaluated.The results showed that silk dyed with this dye had very good ultraviolet radiation protection capability and excellent dyeing performance.The UV-absorption mechanism of this dye was also discussed.     

Effect of TiO2 colloids on the fluorescence behavior of two cyanine dyes

The photophysical properties of two typical cyanine dyes [3,3'-diethyl-9-methyl-thiacarbocyanine iodide (dye A) and anhydro-3,3'-disulfopropyl-5,5'-diphenyl-9-ethyloxacarbocyanine hydroxide (dye B)] in the absence and presence of TiO(2) colloids have been investigated by UV-visible spectroscopy, (1)H-NMR spectroscopy, fluorescence spectroscopy, fluorescence lifetime measurements, and ESR measurements. It was found from the absorption spectra and NMR results that there are two isomers in the ground state of these dyes. Steady-state fluorescence spectra show that the fluorescence intensities of dye A and dye B are enhanced and quenched by TiO(2) colloids, respectively. Time-resolved fluorescence lifetime measurements indicate that the lifetimes of dye A and dye B in the presence of TiO(2) colloids are longer and shorter than those obtained in the absence of TiO(2) colloids, respectively. ESR measurements demonstrate that the electron transfer efficiency from (1)dye B* to the conduction band of TiO(2) is much larger than that from (1)dye A* to the conduction band of TiO(2). The different fluorescence behavior of dye A and dye B can be intepreted in terms of whether phi(Tr,nr)(0)-phi(Tr,nr) (the reduction of the quantum yield for radiationless transition in the excited singlet state (1)dye* caused by the TiO(2) colloids) is larger or smaller than phi(ET) (the quantum yield of electron transfer from (1)dye* to the conduction band of TiO(2) colloids).     

Characterization of a novel water-soluble 3,4,9,10-perylenetetracarboxylic diimide in solution and in self-assembled zirconium phosphonate thin films

The properties of N,N'-bis(2-phosphonoethyl)-3,4,9,10-perylenetetracarboxylic diimide (PPDI), a water-soluble perylene dye, have been studied in solution and in thin films. Absorption spectra showed that PPDI exists in the monomeric form in water/ethanol (1:1) and water/dimethyl sulfoxide (DMSO) (3:7) mixtures, but forms dimers in water and higher aggregates in ethanol. The PPDI monomer is highly fluorescent, in contrast to the dimers and aggregates, which are nonfluorescent. The monomer/dimer equilibrium was conveniently followed in a water/ethanol (7:3) mixture by varying the dye concentration. An equilibrium constant of K = 1.25 x 10(5) M(-1) was estimated for the dimerization process in this solvent mixture. The addition of cetyl trimethylammonium bromide (CTAB), a cationic surfactant, to aqueous solutions of PPDI resulted in the dissociation of the dimers, showing that the dye was incorporated into the micellar phase. Self-assembled thin films of PPDI were grown on both silica gel particles and flat surfaces, using zirconium phosphonate chemistry. The growth of multilayered films on flat surfaces was monitored by ellipsometry (silicon substrates) and UV/Vis spectroscopy (quartz slides), and was linear with the number of deposition cycles. No fluorescence was detected from the PPDI films, and the absorption spectra of the films were quite similar to the spectrum of the compound in ethanol, indicating that the dye molecules were stacked in the films. Mixed monolayers containing PPDI and N,N'-bis(2-phosphonoethyl)-1,4,5,8-naphthalenediimide (PNDI) on quartz were also prepared. Monolayers obtained by codeposition from solutions containing both PPDI and PNDI were richer in PPDI, even when the solution contained a large excess of the naphthalene derivative, showing that pi-stacking of PPDI is an important driving force in the formation of the films.     

Design of novel substituted phthalocyanines; synthesis and fluorescence,DFT, photovoltaic properties

The 4-(2-[3,4-dimethoxyphenoxy] phenoxy) phthalonitrile was synthesized as the starting material of new syntheses. Zinc, copper, and cobalt phthalocyanines were achieved by reaction of starting compound with Zn(CH3COO)2, CuCl2, and CoCl2 metal salts. Basic spectroscopic methods such as nuclear magnetic resonance electronic absorption, mass and infrared spectrometry were used in the structural characterization of the compounds. Absorption, excitation, and emission measurements of the fluorescence zinc phthalocyanine compound were also investigated in THF. Then, structural, energy, and electronic properties for synthesized metallophthalocyanines were determined by quantum chemical calculations, including the DFT method. The bandgap of HOMO and LUMO was determined to be chemically active. Global reactivity (I, A, η, s, μ, χ, ω) and nonlinear properties were studied. In addition, molecular electrostatic potential (MEP) maps were drawn to identify potential reactive regions of metallophthalocyanine (M-Pc) compounds. Photovoltaic performances of phthalocyanine compounds for dye sensitive solar cells were investigated. The solar conversion efficiency of DSSC based on copper, zinc, and cobalt phthalocyanine compounds was 1.69%, 1.35%, and 1.54%, respectively. The compounds have good solubility and show nonlinear optical properties. Zinc phthalocyanine gave fluorescence emission.     

Synthesis of a New Cationic Pyropheophorbide Derivative and Studies of its Aggregation Process in Aqueous Solution

Abstract— A new water-soluble cationic pyropheophorbide was prepared from pyropheophorbide a by a Curtius rearrangement. The self-aggregation process of this chlorhydrate of aminopyropheophorbide was investigated from the changes observed in its spectroscopic properties when passing from ethanol to aqueous solutions. The formation of aggregates was characterized in the absorption spectrum by a broadening of the Qy band, which is slightly shifted to the red, a significant increase in signals of circular dichroism and a drastic quenching of the fluorescence intensity at 674 nm. Analysis of the nonlinear variation of the fluorescence intensity with the dye concentration in Tris-buffered solutions shows that dimerization is the dominant aggregation process. The dimerization equilibrium constant(at 25_AoC, pH 7.5 in 5 m M Tris buffer, 10 m M NaCl) was determined to be 3.10₆ M _-l. NMR measurements performed in DMSO at various dye concentrations showed that only the chemical shifts of some atoms are affected by these changes, indicating the part of the ring involved in the overlap of the two molecules in the dimer.A molecular modeling study of the packing arrangement of the aminopyropheophorbide molecules in aggregates performed by both semi-empirical quantum chemical PM3 and force field MM2 methods provided a structure consistent with these spectroscopic data.     

Synthesis and dyeing performance of a novel polycarboxylic acid azo dye

A novel reactive polycarboxylic acid dye was synthesized by the reaction of polymaleic anhydride（PMA） with 3-methyl-1-（4- sulfonylphenyl）-4-（4-aminophenylazo）-2-pyrazoline-5-one.The structure of the novel dye was characterized by FTIR,UV-vis and ¹³C NMR spectra.The dyeing properties of dye on cotton were tested,and the novel dye possessed high fixation and good fastness.     

PHTHALOCYANINE FLUORESCENCE AT HIGH CONCENTRATION: DIMERS OR REABSORPTION EFFECT?

Abstract— For tetrasulfonated aluminum phthalocyanine (AlPcS₄), dimer formation is characterized in the absorption spectrum by a broadening of the Q-band and the appearance of a new band at the red edge of the spectrum. The high concentrations required to produce dimers, however, often leads to anomalous observations in fluorescence spectroscopy. In the present study, we have examined the photophysical characteristics of two dye systems; AlPcS₄ in a 66% ethanol/water mixture and disulfonated aluminum phthalocyanine in methanol. Using absorption spectroscopy, the formation of dimers is shown to be prevalent only in the case of AlPcS₄. The fluorescence emission spectra in both cases, however, exhibit similar spectral changes with increasing dye concentration. The measured fluorescence decay profiles for both dyes also show similar trends: They are monoexponential, invariant with emission wavelength and have decay times that increase with dye concentration. These distortions are sometimes incorrectly attributed to dimer fluorescence. We find no evidence for the existence of dimer fluorescence and demonstrate that these data can be readily explained, by taking into consideration the effects of reabsorption of fluorescence.     

Ratiometric, fluorescent BODIPY dye with aza crown ether functionality: synthesis, solvatochromism, and metal ion complex formation

A new pH and metal ion-responsive BODIPY-based fluorescent probe with an aza crown ether subunit has been synthesized via condensation of 4-(1,4,7,10-tetraoxa-13-aza-cyclopentadec-13-yl)-benzaldehyde with the appropriate 1,3,5,7-tetramethyl substituted boron dipyrromethene moiety. Steady-state and time-resolved fluorometries have been used to study the spectroscopic and photophysical characteristics of this probe in various solvents. The fluorescence properties of the dye are strongly solvent dependent: increasing the solvent polarity leads to lower fluorescence quantum yields and lifetimes, and the wavelength of maximum fluorescence emission shifts to the red. The Catalan solvent scales are found to be the most suitable for describing the solvatochromic shifts of the fluorescence emission. Fluorescence decay profiles of the dye can be described by a single-exponential fit in nonprotic solvents, whereas two decay times are found in alcohols. Protonation as well as complex formation with several metal ions are investigated in acetonitrile as solvent via fluorometric titrations. The aza crown ether dye undergoes a reversible (de)protonation reaction (pKa = 0.09) and shows a approximately 50 nm blue shift in the excitation spectra and a 10-fold fluorescence increase upon protonation. The compound also forms 1:1 complexes with several metal ions (Li(+), Na(+), Mg(2+), Ca(2+), Ba(2+), Zn(2+)), producing large blue shifts in the excitation spectra and significant cation-induced fluorescence amplifications.