Structural and Oxidation State Alternatives in Platinum and Palladium Complexes of a Redox-Active Amidinato Ligand

Reaction of [Pt(DMSO)₂Cl₂] or [Pd(MeCN)₂Cl₂] with the electron-rich LH=N,N’-bis(4-dimethylaminophenyl)ethanimidamide yielded mononuclear [PtL₂] ( 1 ) but dinuclear [Pd₂L₄] ( 2 ), a paddle-wheel complex. The neutral compounds were characterized through experiments (crystal structures, electrochemistry, UV-vis-NIR spectroscopy, magnetic resonance) and TD-DFT calculations as metal(II) species with noninnocent ligands L⁻. The reversibly accessible cations [PtL₂]⁺ and [Pd₂L₄]⁺ were also studied, the latter as [Pd₂L₄][B{3,5-(CF₃)₂C₆H₃}₄] single crystals. Experimental and computational investigations were directed at the elucidation of the electronic structures, establishing the correct oxidation states within the alternatives [Pt^II(L⁻)₂] or [Pt^.(L )₂], [Pt^II(L^0.5−)₂]⁺ or [Pt^III(L⁻)₂]⁺, [(Pd^II)₂(μ-L⁻)₄] or [(Pd^1.5)₂(μ-L^0.75−)₄], and [(Pd^2.5)₂(μ-L⁻)₄]⁺ or [(Pd^II)₂(μ-L^0.75−)₄]⁺. In each case, the first alternative was shown to be most appropriate. Remarkable results include the preference of platinum for mononuclear planar [PtL₂] with an N-Pt-N bite angle of 62.8(2)° in contrast to [Pd₂L₄], and the dimetal (Pd₂⁴⁺→Pd₂⁵⁺) instead of ligand (L⁻→L ) oxidation of the dinuclear palladium compound.     

A Mechanistic Study of the Multiple Roles of Oleic Acid in the Oil-Phase Synthesis of Pt Nanocrystals

Oleic acid (OAc) is commonly used as a surfactant and/or solvent for the oil-phase synthesis of metal nanocrystals but its explicit roles are yet to be resolved. Here, we report a systematic study of this problem by focusing on a synthesis that simply involves heating of Pt(acac)₂ in OAc for the generation of Pt nanocrystals. When heated at 80 °C, the ligand exchange between Pt(acac)₂ and OAc leads to the formation of a Pt^II–oleate complex that serves as the actual precursor to Pt atoms. Upon increasing the temperature to 120 °C, the decarbonylation of OAc produces CO, which can act as a reducing agent for the generation of Pt atoms and thus formation of nuclei. Afterwards, several catalytic reactions can take place on the surface of the Pt nuclei to produce more CO, which also serves as a capping agent for the formation of Pt nanocrystals enclosed by {100} facets. The emergence of Pt nanocrystals further promotes the autocatalytic surface reduction of Pt^II precursor to enable the continuation of growth. This work not only elucidates the critical roles of OAc at different stages in a synthesis of Pt nanocrystals, but also represents a pivotal step forward toward the rational synthesis of metal nanocrystals.     

A Quantitative Analysis of the Reduction Kinetics Involved in the Synthesis of Au@Pd Concave Nanocubes

Surface capping has been shown to play a pivotal role in controlling the evolution of metal nanocrystals into different shapes or morphologies. With the synthesis of Au@Pd concave nanocubes as an example, here we demonstrate that the capping agent can also impact the reduction kinetics of a precursor, and thereby its reduction pathway, for the formation of metal nanocrystals with distinct morphologies. A typical synthesis involves the reduction of a Pd^II precursor by ascorbic acid at room temperature in the presence of Au nanospheres as seeds, together with the use of hexadecyltrimethylammonium chloride (CTAC) or hexadecyltrimethylammonium bromide (CTAB) as the capping agent. In the case of CTAC, the Pd^II precursor prevails as PdCl₄²⁻, leading to the formation of Au@Pd concave nanocubes with a rough surface because of the fast reduction kinetics and thus the dominance of solution reduction pathway. When switched to CTAB, the Pd^II precursor changes to PdBr₄²⁻ that features slow reduction kinetics and surface reduction pathway. Accordingly, the Au@Pd concave nanocubes take a smooth surface. This work demonstrates that both reduction kinetics and surface capping play important roles in controlling the morphology of metal nanocrystals and these two roles are often coupled to each other.     

"Directed" assembly of metallacalix[n]arenes with pyrimidine nucleobase ligands of low symmetry: interchanging metals in mixed-metal metallacalix[4]arenes and incorporating additional metals at the exocyclic groups

The pyrimidine (pym) nucleobase cytosine (H₂C) forms cyclic ring structures (“metallacalix[n]arenes”) when treated with square‐planar cis‐a₂M^II entities (M=Pt, Pd; a=NH₃ or a₂=diamine). The number of possible linkage isomers for a given n and the number of possible rotamers can be substantially reduced if a “directed” approach is pursued. Hence, two cytosine ligands are bonded in a defined way to a kinetically robust platinum corner stone. In the accompanying paper (Part I: A. Khutia, P. J. Sanz Miguel, B. Lippert, Chem. Eur. J. 2010 , 17, DOI: 10.1002/chem.2010002722) we have demonstrated this principle by allowing cis‐[Pta₂(H₂C‐N3)₂]²⁺ to react with (en)Pd^II to give cycles of (N1,N3 ? N3,N1?)_x (with x=2 or 3; ? represents Pt^II and ? represents Pd^II). In an extension of this work we have now prepared cis‐[Pta₂(HC‐N1)₂] ( 1 ; HC=monoanion of cytosine) and treated it with (bpy)Pd^II (bpy=2,2′‐bipyridine) to give the Pt₂Pd₂ cycle cis‐[{Pt(NH₃)₂(N1‐HC‐N3)₂Pd(bpy)}₂](NO₃)₄ ? 13H₂O ( 5 ) with the coordination sites of the metals inverted; hence, platinum is bonded to N1 and palladium is bonded to N3 sites. Again, not only the expected single linkage isomer is formed, but at the same time the solid‐state structure and ¹H NMR spectroscopy reveal the preferential occurrence of a single rotamer (1,3‐alternate). The addition of (bpy)Pd^II to 5 led to the formation of Pd₆Pt₂ complex 6 in which the exocyclic N4H₂ groups of the cytosine ligands have undergone deprotonation and chelate four more (bpy)Pd^II entities through the O2 and N4H sites. With a large excess of (bpy)Pd^II over 5 (4:1), cis‐(NH₃)₂Pt^II is eventually substituted by (bpy)Pd^II to give the Pd₈ complex 7 . In both 6 and 7 stacks of three (bpy)Pd^II entities occur. The linkage isomer of 5 , cis‐[{Pt(NH₃)₂(N3‐HC‐N1)₂Pd(bpy)}₂](NO₃)₄ ? 9H₂O ( 8 ), has been structurally characterized and the two complexes compared. The acid/base properties of cis‐[Pt(NH₃)₂(H₂C‐N1)₂] ( 1 ) have been determined and compared with those of the corresponding N3 isomer. The complexation of AgCl by 1 is reported.     

Can Serendipity Still Hold Any Surprises in the Coordination Chemistry of Mixed-Donor Macrocyclic ligands? The Case Study of Pyridine-Containing 12-Membered Macrocycles and Platinum Group Metal ions PdII,PtII, and RhIII

This study investigates the coordination chemistry of the tetradentate pyridine-containing 12-membered macrocycles L¹-L³ towards Platinum Group metal ions Pd^II, Pt^II, and Rh^III. The reactions between the chloride salts of these metal ions and the three ligands in MeCN/H₂O or MeOH/H₂O (1:1 v/v) are shown, and the isolated solid compounds are characterized, where possible, by mass spectroscopy and ¹H- and ¹³C-NMR spectroscopic measurements. Structural characterization of the 1:1 metal-to-ligand complexes [Pd(L¹)Cl]₂[Pd₂Cl₆], [Pt(L¹)Cl](BF₄), [Rh(L¹)Cl₂](PF₆), and [Rh(L³)Cl₂](BF₄)·MeCN shows the coordinated macrocyclic ligands adopting a folded conformation, and occupying four coordination sites of a distorted square-based pyramidal and octahedral coordination environment for the Pd^II/Pt^II, and Rh^III complexes, respectively. The remaining coordination site(s) are occupied by chlorido ligands. The reaction of L₃ with PtCl₂ in MeCN/H₂O gave by serendipity the complex [Pt(L³)(μ-1,3-MeCONH)PtCl(MeCN)](BF₄)₂·H₂O, in which two metal centers are bridged by an amidate ligand at a Pt1-Pt2 distance of 2.5798(3) Å and feature one square-planar and one octahedral coordination environment. Density Functional Theory (DFT) calculations, which utilize the broken symmetry approach (DFT-BS), indicate a singlet d⁸-d⁸ Pt^II-Pt^II ground-state nature for this compound, rather than the alleged d⁹-d⁷ Pt^I-Pt^III mixed-valence character reported for related dinuclear Pt-complexes.     

Platinum(II) and palladium(II) chlorides complexes with purine,pyrimidine,N-ethylimidazole andN-propylimidazole

Summary Platinum(II) and palladium(II) chloride complexes with purine, pyrimidine (pyrimid),N-ethylimidazole(N-EtIm) andN-propylimidazole(N-PropIm) ligands have been prepared and characterized by analysis and spectroscopic methods. The compounds have general formula M(L₁)(L₂)Cl₂ where M=Pt^II, Pd^II; L₁=purine or pyrimid, L₂=N-EtIm orN-PropIm, except the complexes Pt(purine)(pyrimid)Cl₂ and [Pd(purine)(pyrimid)₂Cl]Cl and [Pt(purine)₂ (N-propIm)Cl]Cl·2H₂O.     

Palladium(II) and Platinum(II) Complexes of N-Phenyl- and N-Ethyl-N′-pyrimidin-2-ylthiourea

Palladium(II) and platinum(II) complexes of N-ethyl-N′-pyrimidin-2-ylthiourea(HL¹) and N-phenyl-N′-pyrimidin-2-ylthiourea (HL²) have been prepared, and the complexes [M(HL)Cl₂], [Pt(L)₂], [Pd(HL¹)₂]Cl₂, and [Pd(L²)₂] (where M = Pd^II or Pt^II) were characterized. The spectroscopic data are consistent with coordination of thioureas as neutral or monoanionic ligands to Pd^II and Pt^II through S and a pyrimidine-N. The IR spectra show shifts of CS and pyrimidine ring stretch bands to lower and higher frequencies, respectively. The ¹H NMR spectra differentiate between H(4′) and H(6′) resonances and indicate downfield shifts for all protons of pyrimidine [H(4′), H(5′), and H(6′)], two resonances for two N?H protons for complexes containing the neutral ligand (HL), and only one N?H proton chemical shift for complexes containing the monoanion (L). ¹³C NMR chemical shifts of pyrimidine carbons are correlated with the type of bonding between Pd^II or Pt^II and pyrimidine-N. The magnetic susceptibilities suggest a diamagnetic planar structure for all complexes.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Thermal and structural properties of coordination compounds of 2-mercapto-1-methylimidazole with palladium(II) and platinum(II)

Complexes of 2-mercapto-1-methylimidazole (TMZ) with Pd^II and Pt^II of the general formula M(TMZ)_nX₂ (whereM=Pd, Pt andX=Cl, Br, I or SO₄ andn=2 or 4) were obtained. The thermal stabilities of the compounds were estimated by derivatographic measurements and lattice constants were estimated from their X-ray powder diffraction patterns.     

DFT studies of the characteristics of Pd−Pt core-shell clusters

It is reported that Pd?Pt core-shell type nanoclusters in which the inner atoms of the Pd cluster are substituted by Pt significantly enhance the catalytic activity for cycloocatdiene hydrogenation. In order to discuss the electronic states of core-shell clusters, DFT calculations were carried out for Pd₁₃, Pt₁₃, Pt/Pd₁₂, Pd/Pt₁₂ Pd₃₈ and Pd₆/Pt₃₂ clusters. From these calculations, it was found that the charge transfer between the core atoms and the shell atoms played an important role for the modification of the electronic state of the surface atoms in them.     

Ultrafine PtRu Dilute Alloy Nanodendrites for Enhanced Electrocatalytic Methanol Oxidation

Dilute alloy nanostructures have been demonstrated to possess distinct catalytic properties. Noble-metal-induced reduction is one effective synthesis strategy to construct dilute alloys and modify the catalytic performance of the host metal. Herein, we report the synthesis of ultrafine PtRu dilute alloy nanodendrites (PtRu NDs, molar ratio Ru/Pt is 1:199) by the reduction of Ru^III ions induced by Pt metal. For the methanol oxidation reaction, PtRu NDs showed the highest forward peak current density (2.66 mA cm⁻², 1.14 A/mg_Pt) and the best stability compared to those of pure-Pt nanodendrites (pure-Pt NDs), commercial PtRu/C and commercial Pt/C catalysts.     

Metalizing carbon nanotubes with Pd–Pt core–shell nanowires enhances electrocatalytic activity and stability in the oxygen reduction reaction

We describe an electrostatically induced self-assembly method to prepare ultrathin Pd nanowires (NWs) surrounding individual multiwalled carbon nanotubes, i.e., Pd_NW/MWNTs, that are noticeable for improving performance in the oxygen reduction reaction (ORR) of their supported Pt_ML electrocatalyst. The carbonaceous by-products in MWNTs, rather than the nanotubes themselves, are modified with the oxygenated terminals to allow the negatively charged and hydrophilic surface while retaining the intrinsic nature of the MWNTs. Encompassing the nanotubes' length are 2-nm-thick Pd NWs that are closely packed and homogeneously dispersed due to the unique processes for preparing Pd_NW/MWNTs and its components. Although the crystal lattice of the Pd NWs expands somewhat, which should cause an unfavorable interaction with supported Pt_ML, this adverse effect is counterweighed by the shape-determined features of Pd NWs, including their high specific surface area, excellent contiguousness, and low-energy atomic configuration. Consequently, these distinct chemical and physical properties substantially expedite the desorption of the intermediates to refresh the active centers during the reduction of oxygen with the Pt_ML electrocatalyst while ensuring a desirable electron transfer rate, so improving the overall ORR kinetics. Indeed, Pt_ML/Pd_NW/MWNTs exhibits the Pt mass and specific activities of 1.45 A/mg_Pt and 0.65 mA/cm² _Pt, respectively, each of which are several times those of the Pt/C and even higher than those of the Pt_ML supported on Pd nanoparticles. These high activities remained over a long-term stability test using the latest US Department of Energy-established protocol.     

Supramolecular Polymers Self‐Assembled from trans‐Bis(pyridine) Dichloropalladium(II) and Platinum(II) Complexes

Two structurally similar trans‐bis(pyridine) dichloropalladium(II)‐ and platinum(II)‐type complexes were synthesized and characterized. They both self‐assemble in n‐hexane to form viscous fluids at lower concentrations, but form metallogels at sufficient concentrations. The viscous solutions were studied by capillary viscosity measurements and UV/Vis absorption spectra monitored during the disassembly process indicated that a metallophilic interaction was involved in the supramolecular polymerization process. For the two supramolecular assemblies, uncommon continuous porous networks were observed by using SEM and TEM revealed that they were built from nanofibers that fused and crosslinked with the increase of concentration. The xerogels of the palladium and platinum complexes were carefully studied by using synchrotron radiation WAXD and EXAFS. The WAXD data show close stacking distances driven by π–π and metal–metal interactions and an evident dimer structure for the platinum complex was found. The coordination bond lengths were extracted from fitting of the EXAFS data. Moreover, close Pt^II–Pt^II (Pd^II–Pd^II) and Pt?Cl (Pd?Cl) interactions proposed from DFT calculations in the reported oligo(phenylene ethynylene) (OPE)‐based palladium(II) pyridyl supramolecular polymers were also confirmed by using EXAFS. The Pt^II–Pt^II interaction is more feasible for supramolecular interaction than the Pd^II–Pd^II interaction in our simple case.     

Overcoming the Trade-Off between C2H2 Sorption and Separation Performance by Regulating Metal-Alkyne Chemical Interaction in Metal-Organic Frameworks

Designing porous materials for C₂H₂ purification and safe storage is essential research for industrial utilization. We emphatically regulate the metal-alkyne interaction of Pd^II and Pt^II on C₂H₂ sorption and C₂H₂/CO₂ separation in two isostructural NbO metal–organic frameworks (MOFs), Pd/Cu-PDA and Pt/Cu-PDA . The experimental investigations and systematic theoretical calculations reveal that Pd^II in Pd/Cu-PDA undergoes spontaneous chemical reaction with C₂H₂, leading to irreversible structural collapse and loss of C₂H₂/CO₂ sorption and separation. Contrarily, Pt^II in Pt/Cu-PDA shows strong di-σ bond interaction with C₂H₂ to form specific π-complexation, contributing to high C₂H₂ capture (28.7 cm³ g⁻¹ at 0.01 bar and 153 cm³ g⁻¹ at 1 bar). The reusable Pt/Cu-PDA efficiently separates C₂H₂ from C₂H₂/CO₂ mixtures with satisfying selectivity and C₂H₂ capacity (37 min g⁻¹). This research provides valuable insight into designing high-performance MOFs for gas sorption and separation.     

Die Massenspektren von Pd6Cl12, Pt6Cl12 und PdnPt6−nCl12

Mass Spectra of Pd₆Cl₁₂, Pt₆Cl₁₂, and Pd_nPt_6?nCl₁₂ Pd₆Cl₁₂, and Pt₆Cl₁₂ and both together are volatilised in a mass spectrometer. 3 Cl and 1 Pd have approximately the same mass, therefore isotopes of Pd and Pt are used (¹⁰⁸Pd, ₁₉₄Pt). With an ionisation energy of 50 eV part of the vapourised molecules is strongly fragmented. With a lower ionisation energy the molecule ions Pd₆Cl₁₂⁺, Pt₆Cl₁₂⁺ and Pd_nPt_6?nCl₁₂⁺ are only observed.     

Small‐Sized Tungsten Nitride Particles Strongly Anchored on Carbon Nanotubes and their Use as Supports for Pt for Methanol Electro‐oxidation

The anchoring of small‐sized WN (tungsten nitride) nanoparticles (NPs) with good dispersion on carbon nanotubes (CNTs) offers an effective means of obtaining promising materials for use in electrocatalysis. Herein, an effective method based on grinding treatment followed by a nitridation process is proposed to realize this goal. In the synthesis, a solution containing H₄[SiO₄(W₃O₉)₄] (SiW₁₂) and CNTs modified with polyethylenimine (PEI‐CNTs) was ground to dryness. Small‐sized WN NPs were anchored onto the CNTs with good dispersion after calcination under NH₃. Under hydrothermal assembly conditions (absence of grinding), WN particles of larger size and with inferior dispersion were obtained, demonstrating the important role of the grinding process. The benefit of the small‐sized WN has been demonstrated by using WN/CNTs as a support for Pt to catalyze the methanol electro‐oxidation reaction. The mass activity of Pt‐WN/CNTs‐G‐70 (where G denotes the grinding treatment, and 70 is the loading amount (%) of WN in the WN/CNTs) was evaluated as about 817 mA mg^?1_Pt, better that those of commercial Pt/C (340 mA mg^?1_Pt) and Pt/CNTs (162 mA mg^?1_Pt). The Pt‐WN/CNTs‐G also displayed good CO tolerance. In contrast, Pt‐WN/CNTs prepared without the grinding process displayed an activity of 344 mA mg^?1_Pt, verifying the key role of grinding treatment in the preparation of WN/CNTs with good co‐catalytic effect.     

Size‐Controllable Synthesis of Trimetallic RhPdPt Island‐Shaped Nanoalloys with Enhanced Electrocatalytic Performance for Ethanol Oxidation in Alkaline Medium

Size‐controllable, high‐yield, island‐shaped RhPdPt trimetallic nanocrystals with sub‐2.0 nm islands have been successfully synthesized through a facile aqueous solution approach. The results of X‐ray diffraction (XRD), energy‐dispersive X‐ray (EDX) line scanning and elemental mapping analysis showed the as‐synthesized RhPdPt nanocrystals are alloy structures. These island‐shaped RhPdPt trimetallic nanoalloys showed a composition‐dependent electrocatalytic performance for ethanol oxidation in alkaline medium. Due to the special structure and intermetallic synergies, the Rh₁₀Pd₄₀Pt₅₀ nanoalloys exhibited an enhanced catalytic activity and durability relative to island‐shaped Pd₅₀Pt₅₀ bimetallic nanoalloys and commercial Pt black. The peak current density for Rh₁₀Pd₄₀Pt₅₀ nanoalloys was 1.81 and 1.38 times that for commercial Pt black and Pd₅₀Pt₅₀ nanoalloys, respectively. In addition, the peak potential on Rh₁₀Pd₄₀Pt₅₀ nanoalloys decreased 42 mV relative to commercial Pt black and Pd₅₀Pt₅₀ nanoalloys.     

Coordination compounds of 2-mercapto-1-methylimidazole with platinum(II), palladium(II), rhodium(III) and ruthenium(III)

Summary Complexes of 2-mercapto-1-methylimidazole (TMZ) with Pt^II, Pd^II, Rh^III and Ru^III of the general formulae Pt(TMZ)₂Cl₂, Pd(TMZ)₄Cl₂. Rh(TMZ)Cl₃ and Ru(TMZ)Cl₃ have been obtained. The thermal stabilities of the compounds were estimated by derivatographic measurements and the electron-donating atom of the measurements and the electron-donating atom of the ligand was identified from the i.r. absorbtion spectra. Lattice constants for the Pt^II and Pd^II complexes were estimated from their x-ray powder diffraction patterns.     

Alloyed Tetranuclear Metal Chains of Pd4−nPtn (n=0–3) Scaffolded by a New Linear Tetraphosphine Containing a PNP Bridge

A new linear tetraphosphine containing a PNP phosphazane bridge, rac-bis[(diphenylphosphinomethyl)phenylphosphino]phenylamine (rac-dpmppan), was synthesized and utilized to support a series of Pd/Pt mixed metal tetranuclear chains, [Pd_4−nPt_n(μ-rac-dpmppan)₂(XylNC)₂](PF₆)₂ (XylNC=xylyl isocyanide; n=0: Pd₄ ( 1 ), 1: PtPd₃ ( 2 ), 2: PtPd₂Pt ( 3 ), 2: Pt₂Pd₂ ( 4 ), 3: Pt₂PdPt ( 5 )), in which the number and positions of additional Pt atoms were successfully controlled depending on the respective synthetic procedures using transformations from 1 to 3 through 2 and from 4 to 5 by redox-coupled exchange reactions. The ³¹P{¹H} NMR and ESI mass spectra and X-ray diffraction analyses revealed almost identical tetranuclear structures, with slight contraction of metal-metal bonds according to incorporation of Pt atoms. The electronic absorption spectra of 1 – 5 exhibited characteristic bands at 635–510 nm with an energy propensity depending on the number and positions of Pt centres, which were assigned to HOMO (dσ*σσ*) to LUMO (dσ*σ*σ*) transition by theoretical calculations. The present results demonstrated that the electronic structures of Pd/Pt mixed-metal tetranuclear complexes are finely tuned as orbital-overlapping alloyed metal chains by atomically precise Pt incorporation in the Pd₄ chain.     

Photolysis and Thermolysis of Platinum(IV) 2,2′‐Bipyridine Complexes Lead to Identical Platinum(II)–DNA Adducts

Two Pt^IV and two Pt^II complexes containing a 2,2′‐bipyridine ligand were treated with a short DNA oligonucleotide under light irradiation at 37 °C or in the dark at 37 and 50 °C. Photolysis and thermolysis of the Pt^IV complexes led to spontaneous reduction of the Pt^IV to the corresponding Pt^II complexes and to binding of Pt^II 2,2′‐bipyridine complexes to N7 of guanine. When the reduction product was [Pt(bpy)Cl₂], formation of bis‐oligonucleotide adducts was observed, whereas [Pt(bpy)(MeNH₂)Cl]⁺ gave monoadducts, with chloride ligands substituted in both cases. Neither in the dark nor under light irradiation was the reductive elimination process of these Pt^IV complexes accompanied by oxidative DNA damage. This work raises the question of the stability of photoactivatable Pt^IV complexes toward moderate heating conditions.